1. 1 OF 3
E-mail:kaajaams@yahoo.com
Mobile: 09715-59753956
OBJECTIVE PROFESSIONAL PROFILE
Hands on knowledge and experience of the management processes as
well as the planning and practical implementation phases of projects
and able to get along with work colleagues and managers. Presently
awaiting for a new challenging situation and better financial careers.
Around Thirteen years of professional
experience in Electromechanical
projects, control systems PLC and
SCADA automation field with multi
discipline aspects such as Engineering,
construction, Quantity survey,
Contracts, Testing and commissioning
in Water and Power sectors related to
Instrumentation, Automation systems,
DCS, PLC, SCADA, Fuel and Gas
systems.
JOB SYNOPSIS
Review and understand P&ID, Cause
and Effect, Loop Diagrams, Schematic
Diagrams, Engineering & Design
Documents, Vendor Documents etc...
Lead and Perform Pre-commissioning,
commissioning and troubleshooting
activity of instrument systems like RTU,
FO network, PLCs, DCS, Field
Instruments, MOVs, Control Valves,
Analyzers etc. at Water projects.
Prepare Pre-Commissioning,
Commissioning procedures and
Instrument Database for System
Completions
Guide and supervise al site works with
associate engineers and supervisors to
achieve Project Completion and
Handover to Client
Interface with customers, consultants,
Client officials and terminal user for
technical clarifications and commercial
matters.
Conducting FAT inspection for field
instruments and Electricals equipment.
Scheduling site activities and Follow up
with client and consultants for
inspection for Bill invoicing.
Preparation of FHO Documents like Test
reports, and As built.
POSITION PROJECT ENGINEER
EXPERIENCE IN GCC 13+ Years
Eagle Electromechanical Equipments Co. L.L.C
Dubai (UAE)
Period: Dec 2011 – Present
Project Engineer
RFX-212120026 - Supply, Installation, Testing & Commissioning of SCADA
system at water Transmission
RFX-212120039 - Supply, Installation, Testing & Commissioning of SCADA
system at water Transmission
CW/308/2008 - Supply, Installation, Testing & Commissioning of SCADA system
at water Transmission
CW/129/2010 – Construction of AL GAFATH Reservoir Phase1/2
RUWAIS HOUSING COMPLEX EXPANSION-
Phase iv construction of infrastructure works-package 2 - project no. 7010 –
Sewage Pumping station
Emirates Trading Agency (ETA-ASCON Group)
Power Projects Division
Period: Feb 2003 – Dec 2011
Project Engineer
CNE/200/2005 – Al-Aweer Gas Turbine Power Station ‘H’ Ph III 4 X 210 MW
Siemens SGT5 – 4000 F Gas-turbo generators (open cycle)
CW/175/2001 - SCADA System for Water Network & Associated Civil & Electro
Mechanical Works
Dubai Festival City 132 kV substation.
GAS TURBINE –RAS AL KHAIMH PLANT - 6.6kV & 132kV Modification Works
Projects Involved in Estimation & Tendering:
CNE/600/2007- Hassyan Power Plant and Water Station Complex.
CW/512/2007 / CW/682/2007 / CW/0128/2007 – Supply, Installation, Testing
& Commissioning of SCADA system at water Transmission
CNE/200/2005 – Al-Aweer Gas Turbine Power Station ‘H’ Ph III 4 X 210 MW
Siemens SGT5 – 4000 F Gas-turbo generators (open cycle)
2. 2 OF 3
RESPONSLBILLTIES
Responsibility for Design / Erection / BOQ preparation/Testing and commissioning SCADA and PLC for various water projects.
Responsibility for all site activities of I&C Works including site erection, Co-ordination with Consultant and clients, inspection and
invoicing project bills.
Manage project schedules and budgets for the part of Instrumentation, Electro-Mechanicals works.
Coordinates with vendors for technical issues raised by clients and consultants.
Preparation, verification, identification and implementation of technical queries in loop diagrams, datasheets, instruments index, IO
schedules, Marshalling cabinet and junction box wiring diagram, P&ID’s, Hook-up diagrams for all DCS systems.
Preparation of Documents for Erection, testing, commissioning works like Electrical Load Schedule, IO list, Termination schedule, As
built, Test report formats for inspection, Electrical power release inspections.
Organising and supervising Erection team work force to executing shutdown period works.
Prepare Requests for Inspection to completed work at site.
Calibration, Installation, commissioning and trouble shooting for all type of field instruments.
Commissioning and maintenance the analyser and transmitters such as pH, Chlorine, Conductivities and Temperature sensors.
Performance test for the all types of pumps with vendor.
Coordinating and Conducting FAT, SAT with Client and Consultant.
Loop checks for all types of measuring instruments such as PT, Flowmeters, Water quality analyser etc.,
Configuring and fault diagnosis of DCS, PLC, SCADA, RTU, Profibus Communication, Analysers and Control Loops.
Provided technical support to maintenance and operations department.
Technical Support for the instrumentation team.
Maintenance and calibration of the control valves
Maintaining/Documenting records of instruments, calibration certificates and monitoring, regular maintenance scheduling.
Maintaining/Monitoring/Certify work done by contract engineers for different phases of projects & Performed root cause analysis of
problem and resolved them.
Maintaining/Performing troubleshooting on instrumentation systems and equipment in the facility.
Investigated incidents and failure of instrumentation equipment and recommended changes in equipment to prevent them.
EXPERIENCE
Experience in instrument system design, construction, installation and maintenance.
Experience in Process of instrument system construction and installation where reductions may be made for the costs incurred,
without negatively affecting the quality and safety levels of the end result
Immense knowledge of industry set rules and regulations regarding instrument system quality control and safety procedures
Knowledge to prepare data sheets, instrument drawings, I/O wiring diagrams, P&IDs, calculation and specifications.
Knowledge of Electrical wiring diagrams, Termination Schedules.
Immense ability to read technical documents and understanding of P&ID's, process flow diagrams and cause & effects.
Capability to modify with Electronic water meter register and integration through communications cable
Designing electrical and instrumentation projects, determined electrical power distribution and data communications.
Familiar with AMR/AMI with pulse, encoder.
Familiar with changes on Automated Meter Reading such as flow rate display, data-logging, leak detection, tamper alarms and
tariffing
Extensive knowledge of SCADA communication systems with IDS RTUs and TRIO radios.
Knowledge of tendering document preparations.
Familiarity with BMS systems (Trane Chiller panels, SIEMENS Control panels)
Familiar with Auma Actuators, Tyco valves, E&H Instruments, Pressure Transmitters (PMC41), Water Quality Analysers and SIEMENS
Flow meters (Mac 3000)
Knowledge of E&H Water Quality analysers using pH sensors, Chlorine, Temperature and conductivity sensors.
Knowledge of IDS RTUs with TRIO radios and PSTN communications.
Knowledge of Danfoss/SIEMENS Magnetic Flowmeters.
3. 3 OF 3
POWER PLANT EXPERIENCE
Fuel Oil systems (oil storage tank, forwarding pump house, Final Flow meter Skid).
Fuel Gas Systems (Knock out drum, Pressure reducing station, water bath heater, Buffering systems, Compressors, Final chance filter
skid, Gas chromatograph system, Emergency Shutoff Valve Skid)
Emission control system.
Erection works (works include Junction Boxes, RTD sensors, Pressure Transmitter, Differential, Pressure Transmitters, Skid, Flow
Transmitters, Cable tray).
Preparation of Cable schedules and Termination schedule with Vendors drawing and requirement of the Client.
Co-ordination works with (works includes approval of drawings, Cable schedule approval, Cable route approvals, PTW obtain)
Modification of cable schedule and cable routing as per the existing site conditions.
Hookup modification works at site as per requirement by the client.
Control room system and telecommunication network cables and termination work coordination and erection works.
Rectification works in the field as per defective alarm from DCS operators.
Checking of all Fire shutoff valves for safe operation for GT startups.
Fuel oil and Fuel gas system’s Skid Field Instrument leak testing and rectification works, Commissioning and calibration co-ordination
works.
Involving closing of punch points related to I&C.
ELECTRICAL SUB STATION EXPERIENCE
The project involves in extension of existing 132kv spare bay and Spare 6.6KV switchgear modification works and GE Fanuc modification.
Exiting Relay Panel modification works.
Testing and commissioning coordination.
Site coordination for procurements.
Cable laying works co-ordination with client and subcontractors as per the approved cable route.
Request for Inspection – documentation works and management.
Involved in the closing of pinch points works related to I&C and GT areas.
Involved in Control room system (PC), telecommunication network cables laying, termination works.
EXPOSURE:
Motorized valves & control units:
Tyco valves with AUMA
Keystone with AUMA and BIFI
Wolter wessel with AUMA
Miv valves with AUMA
Programmable logic controllers:
Siemens Simatic S7-400
GE Fanuc
Auma Sima
Flow, Pressure and Level transmitters
Endress & Hausser
PERSONAL DETAILS:
Name : MS. KAJA MOHIDEEN
Nationality : Indian
Date of Birth : 12TH JUNE 1981
Marital Status : MARRIED
Driving license details : UAE VALID LICENSE
Contacts Details : 00971 55 9753956
0091 9442172694