1. RESUME
Name : Jackie Ting Ding Gin
Date of Birth : 8th July 1982
Address : Block 678B #09-319,Jurong West Street 64, 642678 Singapore
Contact No. : +6593831543
E-mail : m_jac1982@yahoo.com
Nationality : Singaporean
1. Working Experience
Commissioning Manager (2014- 2015)at Falcon Energy Group Singapore
as owner representative in CJ50 Gusto MSC-120 Jackup (4 units)at Shanhaiguan Shipyard, China
Assist project manager to plan the commissioning activities and prepare the schedule to meet the
delivery date
Coordinate with shipyard and vendors to resolve the technical issues found on site
Provide expert technical advices to shipyard project team on construction and commissioning
activities.
Work closely with site surveyorto ensure the rig is constructed according to the contracted class rules
and regulations
Work with engineering and shipyard to prepare commissioning procedures
Review the piping, electrical and HVAC engineering design drawing,
Assist shipyard to prepare completion of Mechanical Completion Dossiers.
Plan and lead the major operation such as full jacking trial, preload jacking, preload holding and
derrick load test.
Lead the multi-disciplines commissioning engineers to coordinate with shipyard personnels to attend
the test and commissioning inspection on the rig for all the systemincluding Drilling System, Mud
System and Marine System such as Ballast and Bilge system, Seawater cooling system, Fresh Water
cooling system, Power Management system, Lighting and distribution System, Vessel Management
System, PAGA/PABX system, Fire and Gas System, Potable Water System, Sewage Treatment
System, Remote Control Valve System and Compressed Air System.
assist and witness mechanical, electrical and piping construction inspection prior to commissioning
and pre-commissioning activities
2. Assistant Project Manager / Commissioning Manager (2013- 2014)at Jurong Shipyard Pte. Ltd. Singapore
Involved in Noble Jackup JU3000N#2 (Noble Mick O’Brien), JU3000N#3 (Noble Houston Colbert)
and JU3000N#5 (Noble Tom Prosser), Helix Q7000 Well Intervention Unit
Assist to project manager to plan the commissioning activities and prepare the schedule to meet the
delivery date
Coordinate with owner and vendorto achieve the commissioning schedule as plan
Work with engineering and vendorto prepare commissioning procedures
Oversee the piping, electrical and HVAC construction problems and coordinate to push for
completion of MCD dossiers.
Plan and lead the major operation such as full jacking trial, preload jacking, preload holding and
derrick load test.
Take lead in managing project testing and commissioning activities which require higher level of
technical sophistication.
Lead the multi-disciplines commissioning engineers to coordinate with client and class representatives
to perform the test and commissioning inspection on the rig for all the systemincluding Drilling
System, Mud System and Marine Systemsuch as Ballast and Bilge system,Seawater cooling system,
Fresh Water cooling system, Power Management system, Lighting and distribution System, Vessel
Management System, PAGA/PABX system, Fire and Gas System, Potable Water System, Sewage
Treatment System, Remote Control Valve System and Compressed Air System
Chair daily commissioning meeting with engineers and client representatives to review daily
commissioning activities and resolve conflicts between client and vendors.
Attend weekly project meeting to report commissioning progress to client project manager.
Report to top management project commissioning progress to reassure them no delay in delivery
schedule.
Utilised shipyard EPCC management software to track and record commissioning progress and punch
list register.
Ensure my commissioning team members to monitor and manage punch list generated during
construction and commissioning.
Assist to project manager to trace down additional job enhancement in variation orders.
Assist to project manager to prepare and execute the recovery plan with production teams when there
is requirement.
Lead commissioning team members to prepare final handoverdocumentation after completion of all
commissioning activities.
Manage and negotiate construction subcontractors effectively in daily construction and
commissioning meeting.
Project Engineer (2011-2012)at Jurong Shipyard Pte. Ltd. Singapore
Involved in Noble Jackup JU3000N#1 Noble Regina Allen piping construction
Read and understand piping technical drawings.
assist to monitor the piping installation jobs
3. help to rectify the piping material shortage problem
monitoring for piping construction progress and set production target
Work togetherwith all parties including owner, engineering and production to rectify piping
installation and testing issues.
Assist to project manager to coordinate the piping contractors to work on recovery plan when the
progress was behind schedule.
Organise construction meeting to communicate project schedule, planning and requirement with
construction team.
Ensure all the production documents such as welding procedure specification, dimension reports and
material certifications are properly documented.
Project Engineer / Commissioning Engineer (2007-2012)at Jurong Shipyard Pte. Ltd. Singapore
Involved in Submersible Rig -West Sirius (Seadrill 8), Petrorig 1 (Ocean Courage), Petrorig III ,
Atwood Osprey, Atwood Condor
Carried out the commissioning activities on marine equipment such as anchorwinches, lifeboat,
rescue craft, life raft, pneumatic water tight doors, starting air system,fuel oil supply and return
system, Main Diesel Generator C280 3600 modal, Ballast, Bilge, Drill Water and Deck Drainage,
Commission of drilling equipment such as Drill Floor Manipulator Arm, Riser Chute, Riser Handling
Crane, Mouse hole, Rotary Table, Active Heave Compensator, Tubular Feeding Machine and
Hydraulic Auto Roughneck
Commission of Mud Systemsuch as High Pressure Mud System, Low Pressure mud charging, Brine
System, Mud Return and Treatment (Shale Shaker, Desilter and Desander) and Mud Drainage.
Working closely with vendorand owner to troubleshoot the problems during commissioning.
Work togetherwith owner to produce commissioning procedures
Work togetherwith construction teamto rectify and resolve the punch list raised during inspection
and commissioning.
prepare the final handover document after completion of all commissioning activities.
Design Engineer (2006-2007): at Insiphil Manufacturing Pte. Ltd, Malaysia
Develop new product.
Design mechanical part, mainly metal stamping parts.
Meet with metal stamping supplier for technical support.
Follow up with supplier for project support.
monitor the parts assembly progress and troubleshoot the assembly conflict occurred
4. 2. Education
Bachelor of Engineering (Honours) Mechanical with Second Class Honours (Upper Division) (CGPA 3.39/4.00)
Multimedia University, Malaysia
2003-2007
3. Skills
Languages
Spoken: English, Malay, Mandarin, Chinese dialect.
Written: English, Malay, and Mandarin.
Technical / Computer Skills
Microsoft Word, Microsoft Excel, Microsoft Power Point, Microsoft Access,C Programming, Catia,
Autocad,Solidwork 2006, Mathlab, Microprocessorprogramming (8051), EPCC inhouse software,
Microsoft Project.
Leadership Skills
Result orientedable to work independently,self-motivated, multi-lingual (Malay, English, Mandarin,
Cantonese and some local dialects), initiative, dynamic, able to work overtime, willing to travel
4. Certifications& Achievements
1. Safety Instruction Course for Shiprepair Manager
2. Fundamental of Offshore and Ship Systems
3. Risk Management Course (accredited by Ministry of Manpower Singapore)
4. Project Management for Executives
5. Offshore Facilities for Oil and Gas Production