This document provides details about a project to design a rubber tapping device. It includes an introduction describing the objectives of increasing farmers' productivity and income. It then lists the project team members and their roles, with the project manager supervising the designer and engineer. The methodology section describes meetings held to discuss objectives and the design process, with the designer and engineer collaborating. The literature review covers concepts from previous learning applied to the project. The document concludes by discussing advantages of the rubber tapping device like easier tapping with less training and more efficient extraction.

1. Page | 1
Table of Contents
INTRODUCTION.................................................................................................... 2,3
LITERATURE REVIEW ....................................................................................... 4,5
METHODOLOGY ..................................................................................................... 6
DISCUSSION OF PROJECT.................................................................................... 7
CONCLUSIONS AND RECOMMENDATION ...................................................... 7
REFERENCES............................................................................................................ 8

2. Page | 2
INTRODUCTION
Our group is one of the designing groups from a manufacturing company, ZHM
Company Sdn. Bhd. The top management had given us a project to design a machine
or device that can contribute to agricultural rural farmers to improve their
productivity. So our project is to design a device that is called Rubber Tapping device
This device is very important to the society, or precisely, to the farmers. This device
will certainly increase the rate of productivity of the rubber tapper in our country,
Malaysia. In some way, this project has made us understand better what we had
learned before in Engineering Drawing subject. We also know how to apply it in real
life situation.
OBJECTIVES
 A device for the grooving and slitting of the free surface for the automatic
tapping of rubber latex comprises
 The rubber tapper can tap a rubber tree much easier without less training.
 This device is affordable for large scale rubber plantation also for the small
scale rubber plantation.
 The price for this device is so reasonable and affordable to all invidious
whether

3. Page | 3
TASK DESCRIPTION
This is our group organization chart :
As we can see from the organization chart of the group, the project manager is
Mardiana Anis. Her role is to supervise and provide technical direction to project
team, especially to the designer and the engineer. She is also the people that hold a
meeting of our group at least twice a week to make sure that everything is going very
well and smoothly. As for Zetty Akhtar, our project designer, she is responsible to
design our project or device. Also, she is the one that need to finish the project
through her drawing and requirements of the project. Firstly, she draws the
orthogonal drawing of the device then draw the 3D drawing of the actual procduct
and its component. She has completed all the drawing based on knowledge form the
previous Engineering Drawing Class and with the help of other group members.
Hafizd Zulhasni is the engineer for this project. He is responsible to manufacture, or
in other words, to construct the device. The engineer is also responsible in choosing
the right material to use for the construction of the device, and make sure that the
device is ready to be used in the estimated time.
MARDIANA ANIS
(PROJECT
MANAGER)
HAFIZD
ZULHASNI
(ENGINEER)
ZETTY AKHTAR
(DESIGNER)

4. Page | 4
LITERATURE REVIEW
We have used a few concepts, knowledge’s and fundamentals from what we have
learnt.
Rubber, the product of this age is cultivated throughout the world with intense
care. Artificial rubber has not yet crossed the quality of natural rubber. The use of
rubber is increasing throughout the world day by day. Hence all the nations including
India are trying to increase the production in parity with the demand. Rubber
cultivators are now getting a good value for their product. Rubber has got a
remarkable share in the agricultural economy. Even small holders are coming forward
for planning rubber in their lands. Recently a situation has arisen where there are no
laborers for tapping the rubber latex from the rubber trees. A serious shortage is felt
in this field. Even if laborers are available they are not skilled enough for tapping the
latex efficiently. Also they won't stick on to the field for a long time.
Hence the rubber planters find it difficult to get skilled laborers for tapping the
latex and have to afford the higher rates of labor charges. While the present invention
is applicable to tapping trees in general, rubber growers have long recognized the
need to obtain the rubber latex by tapping a slit cut with a 30 degree slope to the
horizontal on a half circumference of a rubber tree, generally of the genus Heave.
While the art has available numerous mean of cutting the rubber trees, none is as
effective against the present invention which runs down the side of the tree
automatically and as inexpensive and usage. Further it is a severe headache for the
rubber farmers to get skilled laborers in this field and the mounting labor charges,
welfare expenses etc. A device for the grooving and slitting of the free surface for the
automatic tapping of rubber latex comprises.
A heavy duty motor comprising spur gear system for driving the said mobile
device upon the tree surface. Cutting means with four wings manufactured from high
tempered metal connected to the said motor for cutting and slitting the surface of the
rubber tree. Guard rollers with a diameter of 15 mm for the easy movement of the
said device upon the rugged rubber tree. A handle connected to the ends of the chassis
for the easy handling of the said device. The device as claimed in claim 1 wherein the
said power supply means comprises at least 10 serially connected, rechargeable Ni-
Cd storage batteries of 12V DC and 2500 mA. The device as claimed in claim 2
wherein the said batteries are recharged from 230V AC by means of the eliminator or
adapter socket provided at the rear end of the chassis. The device as claimed in claim
1 wherein the said heavy duty motor comprises a gear box of the ratio 6:1 with a

5. Page | 5
length of 47mm, outer diameter of 37mm providing 1300 RPM at 12V DC and 10
Watts and is connected at the front end of the said device.
The device as claimed in claim 1 wherein the said rubber tree cutting means
comprises highly tempered metal saws fitted directly in the pulley of the said motor at
a distance of at least 2 inches from the device chassis.The device as claimed in claim
1 and 5 wherein the said cutting means are connected to at least two guard rollers
with a diameter of at least 15mm through a metal rod for the free movement of the
said cutting means upon the surface of the rugged rubber tree and for protecting the
said cutting means from the injuries during the operation. The device as claimed in
claim 1 wherein the said glider wheels are provided at the exterior of the said device
in the anti-clock wise direction and parallel to the cutting means for the smooth
movement of the said device over the tree surface. The device as claimed in claim 7
wherein the said glider wheels comprising two wheels are separated by half inch
distance with one wheel projected at 2mm to the front as compared to the other wheel
and are activated by a motor for the smooth movement of the device over the marked
regions of the tree surface. The device as claimed in claim 8 wherein the said glider
wheels helps the movement of all the parts of the said device in all directions and in
proper alignment with the equilibrium. A device for the automatic tapping of latex
from the rubber trees substantially as herein described with reference to
accompanying drawings.

6. Page | 6
METHODOLOGY
Our Project Manager, Mardiana Anis arranges a meeting with all his team which
are a designer, Zetty Akhtar and Hafizd Zulhasni, an engineer, to help her to design a
device. The purpose of Project Manager to do this meeting is to produce a device
which can help the farmers to increase their rate of productivity and while reducing
their effort, but with an increasing income. During this first meeting, Project Manager
asked designer and engineer to list some of the objectives that want to be achieved by
the device that will be designed by designer. After listing the objectives that want to
be achieved, our designer need to design the product that satisfy our objectives and
with advices from our engineer to make sure the process in designing the product run
smoothly.
During the process of designing the product, our Project Manager also lend his
hand by supervising and providing technical direction to the project team members,
mostly and especially to the designer and the engineer. To design the device that
working continuously with less of errors, our designer need to cooperate and discuss
with our engineer because the device that we want to design must extremely follow
the basic of engineering concept. This is because, the device which follow the
engineering concept will have higher tendency of having longer life span.
Our engineer also needs to determine carefully what type of the materials that will
be used in the device. Besides, he also need to provide the dimension of the device
that will be produced accurately because the dimension of the devices also give some
effect to the effectiveness of the device. After all the basic already been considered by
our engineer, now the designer can design the device by guide of the engineer. When
all of this done, the specification and properties of the device need to be shown to our
leader which is Project Manager to make sure the device is following the objectives
that have been stated earlier. After getting agreement from Project Manager, finally
the design of our device will be used to make a real device.

7. Page | 7
DISCUSSION
There are few advantages of our rubber tapping device. Firstly, the rubber
tapper can tap a rubber tree much easier without less training. This device with the
help of user manual, it will only cost one day to master it. Secondly, the raw rubber
can be extracted from the rubber tree more efficiently with this device. By using this
device, the cutting on the tree is constant, so there will be no part with deep cutting
because too deep the cutting, it can kill the rubber tree. Then, this device is affordable
for large scale rubber plantation also for the small scale rubber plantation. Moreover,
if this device is being use by the employee with large scale plantation, the employee
can increase the profit by lowering labor cost. Lastly, the durability of this device is
high which the main body is made from aluminium and the blade made from stainless
steel that can withstand toward the unpredictable weather in Malaysia
CONCLUSION
In conclusion, we hope that our invention which is rubber tapping device will be
able to help rubber tapper farmer to extract the rubber more efficiently. Apart from
that, we also hope that our invention can help the rubber plantation farmer to increase
their profit with the affordable price of this device. Hopefully, our product can bring
great benefit to all people in the rubber tapper industry.
Finally, there are also a few limitation of this device. It maintenance is too
costly. The blade itself has to be change every six month. To tap the rubber tree
efficiently, the blade must be sharp. The joint of this device must also be lubricant
regularly. So, in the future, we are going to replace the blade with some other material
that can withstand the weather in Malaysia but with the same or lower cost.

8. Page | 8
REFERENCES
1. Materials Book 7th Edition (Chapter 22) Materials Selection Economic,
Environment & Design Issues
2. A Brief History of Rubber “ebPolymers/00Rubber_Intro.pdf”
3. http://www.google.com/patents/WO2012017450A2?cl=en
4. The example report from the previous group.