Project planning and control by b.c.punmia and k.k.khandelwal civil enggforall
•
6 likes•1,371 views
The document discusses the history of chocolate, describing how it originated from cacao beans grown by the Olmecs and Mayans in Mexico and Central America. It then explains how Spanish conquistadors brought cacao beans back to Europe in the 16th century, where it eventually became popular as a drink among the elite. Over time, chocolate became widely consumed in powder and solid forms across Europe and North America.
Report
Share
Report
Share
Download to read offline
Recommended
Analysis of beam by plastic theory-part-I,
This document provides an introduction to plastic theory for the analysis of structures. It discusses key concepts like the idealized stress-strain curve, assumptions of plastic theory, formation of plastic hinges, and the concept of shape factor. Shape factor is the ratio of the plastic moment capacity to the elastic moment capacity of a cross-section. Several examples are provided to demonstrate calculating shape factors for different cross-sections, including rectangular, I-sections, unsymmetrical sections, and diamond-shaped sections.
Design of deck slab
This document discusses the analysis and design of bridge decks. It begins by defining what a bridge is as a structure that connects obstacles like hills or rivers. It then discusses the planning process for bridges, including data collection, analysis, and selection. Common bridge structure types are listed as truss, arch, suspension, slab or girder, and cantilever bridges. The components of a bridge, such as the deck slab, abutments, piers, pier caps, girders, and foundations are identified. The document focuses on the deck slab, describing it as the surface of the bridge that can be made of concrete, steel, or wood. Steps for analyzing the deck slab are outlined.
Analysis Of Thin Shell
Download & run(F5) to view all slide properly
Programs available at <https://github.com/anikmal/shellulose->
Basic Introduction to Shell Structure and its classification
Introduction to Bending Theory & Approximation Theory for analysis
Comparison between results obtained from Bending Theory & Beam theory
Challenges Faced in Indian Construction Sector
The Indian construction industry is known to be inefficient and highly resistant to change. Even with a changing market and increasing competition, there are no obvious signs of commensurate changes in methods and approach. Project management, on the other hand, seems to offer what is needed in terms of tools and techniques to raise industry standards. Little is known of the extent to which project management as a discipline exists in India. The aim of this paper, therefore, is to investigate the current level of application of project management and the obstacles that have prevented its introduction in the Indian construction industry.The purpose of this study is to provide business leaders, government, policy makers and nodal agencies with an outline of suggested structural reforms required to de-bottleneck infrastructure implementation in India. It also tries to throw light on various factors or issues which are hindering the development of construction sector of India. This work is independent and has not been commissioned, sponsored or endorsed by any business, government, or other institution.In India Construction has accounted for around 40 per cent of the development investment during the past 50 years. Around 16 per cent of the nations working population depends on construction for its livelihood. The Indian construction industry employs over 30 million people and creates assets worth over ? 200 billion Danish Shakeel | Mr. Zeeshan Khan"Challenges Faced in Indian Construction Sector" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-5 , August 2017, URL: http://www.ijtsrd.com/papers/ijtsrd2328.pdf http://www.ijtsrd.com/engineering/civil-engineering/2328/challenges-faced-in-indian-construction-sector/danish-shakeel
Advantages and disadvantages of Prestressed concrete
Prestressed concrete has several advantages over reinforced concrete including being more crack-resistant, durable, and requiring smaller cross-sectional areas, allowing for longer spans and easier transport. However, it also has some disadvantages such as requiring specialized equipment, advanced technical knowledge, and skilled labor for construction, as well as more expensive prestressing reinforcement bars.
Unit vi-Plastic Analysis of beam Static & Kinematic methods
This document summarizes structural analysis methods for determining collapse loads of beams and frames. It discusses the uniqueness theorem, which states that if a bending moment distribution satisfies equilibrium, mechanism, and yield conditions, it represents the true collapse load. The static and kinematic methods are described for analyzing beams using the lower and upper bound theorems. Steps are provided for each method, including determining plastic hinges. Application to frames involves considering beam, sway, and combined mechanisms. Examples analyze beams and a frame to find collapse loads using different analysis techniques.
english 1 1.5 brick thick bond
1. The document is a student assignment submission containing drawings and notes for brick wall designs, including different brick bonds and views of the walls.
2. It includes drawings titled "1-1/2 Brick Thick wall," "Isometric View Of 1 Brick Wall," and notes on alternative brick wall courses and a 1,3,5, course plan.
3. The submission is from a student named Vartika Khandelwal to Dezyne E'Cole College in Ajmer, India dated January 22, 2013.
Unit 2 shallow foundations Hand written notes
Strength Criteria - Types - choice of foundation - Location of depth - Safe Bearing Capacity - Terzaghi, Skempton and IS Method of Shallow Foundations - Settlement Criteria - Safe bearing pressure based on N- value – allowable bearing pressure; safe bearing capacity - allowable settlements of structures.
Recommended
Analysis of beam by plastic theory-part-I,
This document provides an introduction to plastic theory for the analysis of structures. It discusses key concepts like the idealized stress-strain curve, assumptions of plastic theory, formation of plastic hinges, and the concept of shape factor. Shape factor is the ratio of the plastic moment capacity to the elastic moment capacity of a cross-section. Several examples are provided to demonstrate calculating shape factors for different cross-sections, including rectangular, I-sections, unsymmetrical sections, and diamond-shaped sections.
Design of deck slab
This document discusses the analysis and design of bridge decks. It begins by defining what a bridge is as a structure that connects obstacles like hills or rivers. It then discusses the planning process for bridges, including data collection, analysis, and selection. Common bridge structure types are listed as truss, arch, suspension, slab or girder, and cantilever bridges. The components of a bridge, such as the deck slab, abutments, piers, pier caps, girders, and foundations are identified. The document focuses on the deck slab, describing it as the surface of the bridge that can be made of concrete, steel, or wood. Steps for analyzing the deck slab are outlined.
Analysis Of Thin Shell
Download & run(F5) to view all slide properly
Programs available at <https://github.com/anikmal/shellulose->
Basic Introduction to Shell Structure and its classification
Introduction to Bending Theory & Approximation Theory for analysis
Comparison between results obtained from Bending Theory & Beam theory
Challenges Faced in Indian Construction Sector
The Indian construction industry is known to be inefficient and highly resistant to change. Even with a changing market and increasing competition, there are no obvious signs of commensurate changes in methods and approach. Project management, on the other hand, seems to offer what is needed in terms of tools and techniques to raise industry standards. Little is known of the extent to which project management as a discipline exists in India. The aim of this paper, therefore, is to investigate the current level of application of project management and the obstacles that have prevented its introduction in the Indian construction industry.The purpose of this study is to provide business leaders, government, policy makers and nodal agencies with an outline of suggested structural reforms required to de-bottleneck infrastructure implementation in India. It also tries to throw light on various factors or issues which are hindering the development of construction sector of India. This work is independent and has not been commissioned, sponsored or endorsed by any business, government, or other institution.In India Construction has accounted for around 40 per cent of the development investment during the past 50 years. Around 16 per cent of the nations working population depends on construction for its livelihood. The Indian construction industry employs over 30 million people and creates assets worth over ? 200 billion Danish Shakeel | Mr. Zeeshan Khan"Challenges Faced in Indian Construction Sector" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-5 , August 2017, URL: http://www.ijtsrd.com/papers/ijtsrd2328.pdf http://www.ijtsrd.com/engineering/civil-engineering/2328/challenges-faced-in-indian-construction-sector/danish-shakeel
Advantages and disadvantages of Prestressed concrete
Prestressed concrete has several advantages over reinforced concrete including being more crack-resistant, durable, and requiring smaller cross-sectional areas, allowing for longer spans and easier transport. However, it also has some disadvantages such as requiring specialized equipment, advanced technical knowledge, and skilled labor for construction, as well as more expensive prestressing reinforcement bars.
Unit vi-Plastic Analysis of beam Static & Kinematic methods
This document summarizes structural analysis methods for determining collapse loads of beams and frames. It discusses the uniqueness theorem, which states that if a bending moment distribution satisfies equilibrium, mechanism, and yield conditions, it represents the true collapse load. The static and kinematic methods are described for analyzing beams using the lower and upper bound theorems. Steps are provided for each method, including determining plastic hinges. Application to frames involves considering beam, sway, and combined mechanisms. Examples analyze beams and a frame to find collapse loads using different analysis techniques.
english 1 1.5 brick thick bond
1. The document is a student assignment submission containing drawings and notes for brick wall designs, including different brick bonds and views of the walls.
2. It includes drawings titled "1-1/2 Brick Thick wall," "Isometric View Of 1 Brick Wall," and notes on alternative brick wall courses and a 1,3,5, course plan.
3. The submission is from a student named Vartika Khandelwal to Dezyne E'Cole College in Ajmer, India dated January 22, 2013.
Unit 2 shallow foundations Hand written notes
Strength Criteria - Types - choice of foundation - Location of depth - Safe Bearing Capacity - Terzaghi, Skempton and IS Method of Shallow Foundations - Settlement Criteria - Safe bearing pressure based on N- value – allowable bearing pressure; safe bearing capacity - allowable settlements of structures.
Utilization of fly ash as filler in bituminous mix.
This document discusses using fly ash as an alternative filler in bituminous mixes. It aims to reduce costs by replacing conventional fillers like cement. The objectives are to study fly ash's use in road construction and evaluate modified Marshall properties. A literature review found that fly ash improved stability, strength retention in water, and acted as an anti-stripping agent. The document outlines the materials used - aggregates, bitumen, fillers like cement and fly ash. It details the methodology of conducting Marshall tests to determine properties like stability, flow, density and voids for mixes with different fillers. The conclusion is that these tests will identify the most cost-effective mix.
Steel structures failure
Title: Millennium Bridge at London - Steel Structure Failure
This is 320 m span aluminum and steel bridge across the river Thames. This bridge has steel structure failure because it had vertical, lateral and torsional stiffness. The problem occurred because of side vibration of the bridge deck because of pedestrian lateral excitation. The main reasons for this failure were lateral stiffness of the deck and low damping potential which happens in steel structure only. This bridge was made of two dimensional cable truss. The stiffness in this bridge structure caused this failure in this bridge. Therefore, this bridge was closed for few days to fix the problem. It is therefore highly relates to steel structure failure and is suitable for the case study as well. This problem was rectified with help of installation of lateral dampers. All these characteristics of this bridge failures relates to steel structure failure.
Basic Civil Engineering MCQ
The document contains a 58 question multiple choice test on basic civil engineering. The test covers topics such as surveying, building construction materials and techniques, structures, and other basic civil engineering concepts. The questions assess knowledge of concepts like types of surveying, building components, properties of materials like concrete and masonry, earthquake resistance techniques, and more.
Deep foundations sheet pile
The document discusses sheet pile structures and their uses in construction. It covers cantilever sheet pile walls and anchored sheet pile walls. Some key points include:
- Sheet piles provide resistance to driving stresses and can be reused on multiple projects. They are lightweight and have a long service life above or below water.
- Cantilever sheet pile walls derive their support from the soil on one side of the wall. Anchored sheet pile walls use anchors to provide additional support from the soil on both sides.
- Failure modes of cantilever sheet piles include elastic deformation and straining actions.
- Design of anchors for sheet piles involves locating the anchor plate in a zone to develop full passive resistance from
Methods of rcc design
The document discusses different methods of designing reinforced concrete elements:
1. Modular ratio (working stress) method, which assumes elastic behavior and uses factors of safety. It was the first accepted method but has limitations.
2. Load factor method, which avoids modular ratio and uses load factors to account for ultimate loads. However, it does not consider serviceability.
3. Limit state method, adopted in modern codes, which considers both ultimate and serviceability limit states using partial safety factors applied to loads and material strengths. It provides a comprehensive solution for safety and serviceability.
Aggregates of Concrete
Aggregates make up 65-80% of concrete's volume and are inert fillers that float in the cement paste. Their characteristics impact the performance of fresh and hardened concrete. Aggregates are classified based on size, specific gravity, availability, shape, and texture. Proper aggregate grading leads to a dense, strong concrete mixture. The fineness modulus is a number that indicates an aggregate's grading, and the flakiness index measures elongated particles. Well-graded aggregates with low elongation produce high quality concrete.
Prefabrication structure ppt
Prefabrication involves assembling building components in a factory and transporting them to the construction site. There are several prefabrication systems including open prefab, box type, and large prefab. Prefabricated components include panels, roofs, floors, and more which are manufactured off-site and assembled on-site. Prefabrication offers benefits like reduced construction time and costs, improved quality, and less waste. However, it also has disadvantages such as requiring specialized equipment and skilled labor for transportation and assembly. A case study on a housing project in India demonstrated how prefabrication helped complete buildings faster and with higher quality.
Concrete Technology Study Notes
Cement is a binding agent that undergoes hydration when mixed with water. There are various types of cement including ordinary Portland cement (OPC), rapid hardening cement, and sulphate resisting cement. Cement provides early strength through C3S and later strength through C2S. Heat is generated during cement hydration through an exothermic reaction. Proper storing, grading of aggregates, minimizing segregation, and adding admixtures can improve the properties of concrete.
Presentation on MIVAN -- A versatile aluminum formwork construction technique
By Ravi S. Panchal
at 31st National Convention of Civil Engineers organised by Gujarat State Center, The Institution of Engineers (India) at Ahmedabad
Revit Architecture notes
The document provides steps for learning the basics of Revit Architecture. It outlines 11 steps to create a basic building model including how to open Revit, set up levels and grids, create walls, floors, roofs, doors, windows and other building components, add furniture and fixtures, generate schedules and reports, and render 3D views and walkthroughs. The steps guide the user through the Revit interface and commands for building design and documentation.
Unit ii pile foundations hand written notes
Types of piles - Load carrying capacity of piles based on static pile formulae in different soils- Dynamic pile formulae - Pile load tests - Load carrying capacity of pile groups in sands and clays - Settlement of pile groups.
Soil mechanics and foundation engineering textbook by ARORA
This document outlines a plan for a company reorganization that will close underperforming departments and lay off 20% of the workforce. It discusses consolidating marketing, sales, and customer support teams to increase efficiency. It also describes offering severance packages to terminated employees to help ease the transition period. The changes aim to help the company adapt to recent challenges and become more profitable.
Analysis of simple beam using STAAD Pro (Exp No 1)
The document describes analyzing a simple beam using STAAD.Pro software. It discusses the steps taken, which include generating the beam model geometry by adding nodes and a member, specifying member properties and support types, applying loads, performing analysis, and viewing the results in the form of structure diagrams showing values like bending moment and shear force. The overall aim was to familiarize the user with STAAD.Pro's interface and analyze a basic beam structure.
High strength concrete
As multistoreyed construction is the need of today, high strength concrete is going to replace normal concrete.
Basic principles of design for rcc building
The document discusses building maintenance, common defects, and remedial methods for RCC structures. It describes three main common defects: foundations, walls, and concrete/RCC frames. For foundations, common issues include differential settlement, uplift of shrinkage soil, and dampness. For walls, issues include cracking, dampness penetration, and failure during cyclones. For concrete frames, common problems discussed are seepage/leakage, spalling of concrete, and corrosion of steel reinforcement. The document provides detailed remedial methods for addressing each of these defects.
Quantity surveying notes......
The document appears to be a scanned copy of a legal contract for the sale of a residential property located at 123 Main Street. The contract details the purchase price of $250,000 with a closing date of June 15th. The buyer agrees to pay a $5,000 non-refundable deposit upon signing. Additional terms include conducting an inspection contingency and agreeing to pay all closing costs.
SELF-COMPACTING CONCRETE USING RECYCLED COARSE AGGREGATE
National Conference on Advances in Civil & Mechanical Engineering 2020 is an initiative by GSIT, Karwar to bring the students, researchers and faculties on a common platform to share their work for the benefit of mankind. It is a professional group contributing its mite for the headway of new domains of knowledge in the fields of civil & Mechanical Engineering. NCACME is the second followed the first one was conducted in 2017 with a huge response leading to the publication of 46 papers in International Journals.
Construction equipment (earth work)
what is earthwork? and what is earthwork equipment ?. types of earthwork equipment, tractor, motor grader, backhoe, dragline, clamshell, bulldozer and their applications.
Final design report
This document provides background information on the project to expand the Calvin College Engineering Building. It discusses the history of Calvin College and its engineering program. The existing engineering building was built in 1998 but enrollment has grown substantially, necessitating more space. The team, EnGrowth, was tasked with designing an expansion. Their solution was to add a northeast wing, providing 10,550 additional square feet including more senior design space, classrooms, a chemistry lab, and storage. The team's design includes full site development and structural plans for the expansion.
Ppv ppt
This document discusses the different types of estimates used in construction projects. It describes 7 types of estimates: 1) approximate estimate, 2) detailed estimate, 3) quantity estimate, 4) revised estimate, 5) supplementary estimate, 6) supplementary and revised estimate, and 7) annual repair or maintenance estimate. For each type of estimate, it provides details on what the estimate involves and how it is prepared and used in a construction project.
STUDY OF MECHANICAL AND DURABILITY PROPERTIES OF GEOPOLYMER CONCRETE
This document summarizes a study that evaluated the durability of geopolymer concrete compared to ordinary Portland cement concrete when exposed to seawater. Two geopolymer concrete mixes using 8M and 14M sodium hydroxide solutions and one ordinary Portland cement concrete mix were prepared. Beams and cylinders made with each concrete mix were partially submerged in seawater and an accelerated corrosion test was performed on the reinforced beams by applying a voltage to induce corrosion. The time until cracking occurred due to corrosion was recorded and used to evaluate the durability performance of the different concrete mixes. The test results indicate that geopolymer concrete exhibited better resistance to chloride attack compared to ordinary Portland cement concrete.
My project work(analysis and design of g+3 building)
This is about building design procedure and conceptual differences of building with different Category.
More Related Content
What's hot
Utilization of fly ash as filler in bituminous mix.
This document discusses using fly ash as an alternative filler in bituminous mixes. It aims to reduce costs by replacing conventional fillers like cement. The objectives are to study fly ash's use in road construction and evaluate modified Marshall properties. A literature review found that fly ash improved stability, strength retention in water, and acted as an anti-stripping agent. The document outlines the materials used - aggregates, bitumen, fillers like cement and fly ash. It details the methodology of conducting Marshall tests to determine properties like stability, flow, density and voids for mixes with different fillers. The conclusion is that these tests will identify the most cost-effective mix.
Steel structures failure
Title: Millennium Bridge at London - Steel Structure Failure
This is 320 m span aluminum and steel bridge across the river Thames. This bridge has steel structure failure because it had vertical, lateral and torsional stiffness. The problem occurred because of side vibration of the bridge deck because of pedestrian lateral excitation. The main reasons for this failure were lateral stiffness of the deck and low damping potential which happens in steel structure only. This bridge was made of two dimensional cable truss. The stiffness in this bridge structure caused this failure in this bridge. Therefore, this bridge was closed for few days to fix the problem. It is therefore highly relates to steel structure failure and is suitable for the case study as well. This problem was rectified with help of installation of lateral dampers. All these characteristics of this bridge failures relates to steel structure failure.
Basic Civil Engineering MCQ
The document contains a 58 question multiple choice test on basic civil engineering. The test covers topics such as surveying, building construction materials and techniques, structures, and other basic civil engineering concepts. The questions assess knowledge of concepts like types of surveying, building components, properties of materials like concrete and masonry, earthquake resistance techniques, and more.
Deep foundations sheet pile
The document discusses sheet pile structures and their uses in construction. It covers cantilever sheet pile walls and anchored sheet pile walls. Some key points include:
- Sheet piles provide resistance to driving stresses and can be reused on multiple projects. They are lightweight and have a long service life above or below water.
- Cantilever sheet pile walls derive their support from the soil on one side of the wall. Anchored sheet pile walls use anchors to provide additional support from the soil on both sides.
- Failure modes of cantilever sheet piles include elastic deformation and straining actions.
- Design of anchors for sheet piles involves locating the anchor plate in a zone to develop full passive resistance from
Methods of rcc design
The document discusses different methods of designing reinforced concrete elements:
1. Modular ratio (working stress) method, which assumes elastic behavior and uses factors of safety. It was the first accepted method but has limitations.
2. Load factor method, which avoids modular ratio and uses load factors to account for ultimate loads. However, it does not consider serviceability.
3. Limit state method, adopted in modern codes, which considers both ultimate and serviceability limit states using partial safety factors applied to loads and material strengths. It provides a comprehensive solution for safety and serviceability.
Aggregates of Concrete
Aggregates make up 65-80% of concrete's volume and are inert fillers that float in the cement paste. Their characteristics impact the performance of fresh and hardened concrete. Aggregates are classified based on size, specific gravity, availability, shape, and texture. Proper aggregate grading leads to a dense, strong concrete mixture. The fineness modulus is a number that indicates an aggregate's grading, and the flakiness index measures elongated particles. Well-graded aggregates with low elongation produce high quality concrete.
Prefabrication structure ppt
Prefabrication involves assembling building components in a factory and transporting them to the construction site. There are several prefabrication systems including open prefab, box type, and large prefab. Prefabricated components include panels, roofs, floors, and more which are manufactured off-site and assembled on-site. Prefabrication offers benefits like reduced construction time and costs, improved quality, and less waste. However, it also has disadvantages such as requiring specialized equipment and skilled labor for transportation and assembly. A case study on a housing project in India demonstrated how prefabrication helped complete buildings faster and with higher quality.
Concrete Technology Study Notes
Cement is a binding agent that undergoes hydration when mixed with water. There are various types of cement including ordinary Portland cement (OPC), rapid hardening cement, and sulphate resisting cement. Cement provides early strength through C3S and later strength through C2S. Heat is generated during cement hydration through an exothermic reaction. Proper storing, grading of aggregates, minimizing segregation, and adding admixtures can improve the properties of concrete.
Presentation on MIVAN -- A versatile aluminum formwork construction technique
By Ravi S. Panchal
at 31st National Convention of Civil Engineers organised by Gujarat State Center, The Institution of Engineers (India) at Ahmedabad
Revit Architecture notes
The document provides steps for learning the basics of Revit Architecture. It outlines 11 steps to create a basic building model including how to open Revit, set up levels and grids, create walls, floors, roofs, doors, windows and other building components, add furniture and fixtures, generate schedules and reports, and render 3D views and walkthroughs. The steps guide the user through the Revit interface and commands for building design and documentation.
Unit ii pile foundations hand written notes
Types of piles - Load carrying capacity of piles based on static pile formulae in different soils- Dynamic pile formulae - Pile load tests - Load carrying capacity of pile groups in sands and clays - Settlement of pile groups.
Soil mechanics and foundation engineering textbook by ARORA
This document outlines a plan for a company reorganization that will close underperforming departments and lay off 20% of the workforce. It discusses consolidating marketing, sales, and customer support teams to increase efficiency. It also describes offering severance packages to terminated employees to help ease the transition period. The changes aim to help the company adapt to recent challenges and become more profitable.
Analysis of simple beam using STAAD Pro (Exp No 1)
The document describes analyzing a simple beam using STAAD.Pro software. It discusses the steps taken, which include generating the beam model geometry by adding nodes and a member, specifying member properties and support types, applying loads, performing analysis, and viewing the results in the form of structure diagrams showing values like bending moment and shear force. The overall aim was to familiarize the user with STAAD.Pro's interface and analyze a basic beam structure.
High strength concrete
As multistoreyed construction is the need of today, high strength concrete is going to replace normal concrete.
Basic principles of design for rcc building
The document discusses building maintenance, common defects, and remedial methods for RCC structures. It describes three main common defects: foundations, walls, and concrete/RCC frames. For foundations, common issues include differential settlement, uplift of shrinkage soil, and dampness. For walls, issues include cracking, dampness penetration, and failure during cyclones. For concrete frames, common problems discussed are seepage/leakage, spalling of concrete, and corrosion of steel reinforcement. The document provides detailed remedial methods for addressing each of these defects.
Quantity surveying notes......
The document appears to be a scanned copy of a legal contract for the sale of a residential property located at 123 Main Street. The contract details the purchase price of $250,000 with a closing date of June 15th. The buyer agrees to pay a $5,000 non-refundable deposit upon signing. Additional terms include conducting an inspection contingency and agreeing to pay all closing costs.
SELF-COMPACTING CONCRETE USING RECYCLED COARSE AGGREGATE
National Conference on Advances in Civil & Mechanical Engineering 2020 is an initiative by GSIT, Karwar to bring the students, researchers and faculties on a common platform to share their work for the benefit of mankind. It is a professional group contributing its mite for the headway of new domains of knowledge in the fields of civil & Mechanical Engineering. NCACME is the second followed the first one was conducted in 2017 with a huge response leading to the publication of 46 papers in International Journals.
Construction equipment (earth work)
what is earthwork? and what is earthwork equipment ?. types of earthwork equipment, tractor, motor grader, backhoe, dragline, clamshell, bulldozer and their applications.
Final design report
This document provides background information on the project to expand the Calvin College Engineering Building. It discusses the history of Calvin College and its engineering program. The existing engineering building was built in 1998 but enrollment has grown substantially, necessitating more space. The team, EnGrowth, was tasked with designing an expansion. Their solution was to add a northeast wing, providing 10,550 additional square feet including more senior design space, classrooms, a chemistry lab, and storage. The team's design includes full site development and structural plans for the expansion.
Ppv ppt
This document discusses the different types of estimates used in construction projects. It describes 7 types of estimates: 1) approximate estimate, 2) detailed estimate, 3) quantity estimate, 4) revised estimate, 5) supplementary estimate, 6) supplementary and revised estimate, and 7) annual repair or maintenance estimate. For each type of estimate, it provides details on what the estimate involves and how it is prepared and used in a construction project.
What's hot (20)
Utilization of fly ash as filler in bituminous mix.
Utilization of fly ash as filler in bituminous mix.
Presentation on MIVAN -- A versatile aluminum formwork construction technique
Presentation on MIVAN -- A versatile aluminum formwork construction technique
Soil mechanics and foundation engineering textbook by ARORA
Soil mechanics and foundation engineering textbook by ARORA
Analysis of simple beam using STAAD Pro (Exp No 1)
Analysis of simple beam using STAAD Pro (Exp No 1)
SELF-COMPACTING CONCRETE USING RECYCLED COARSE AGGREGATE
SELF-COMPACTING CONCRETE USING RECYCLED COARSE AGGREGATE
More from Abhilash Chandra Dey
STUDY OF MECHANICAL AND DURABILITY PROPERTIES OF GEOPOLYMER CONCRETE
This document summarizes a study that evaluated the durability of geopolymer concrete compared to ordinary Portland cement concrete when exposed to seawater. Two geopolymer concrete mixes using 8M and 14M sodium hydroxide solutions and one ordinary Portland cement concrete mix were prepared. Beams and cylinders made with each concrete mix were partially submerged in seawater and an accelerated corrosion test was performed on the reinforced beams by applying a voltage to induce corrosion. The time until cracking occurred due to corrosion was recorded and used to evaluate the durability performance of the different concrete mixes. The test results indicate that geopolymer concrete exhibited better resistance to chloride attack compared to ordinary Portland cement concrete.
My project work(analysis and design of g+3 building)
This is about building design procedure and conceptual differences of building with different Category.
Concrete bridge-design-to-bs5400
This document provides a summary of a book on concrete bridge design according to BS 5400. The book aims to provide guidance on applying the limit state design code for concrete bridges by explaining its clauses and comparing them to previous design standards. It discusses analysis methods, loadings, material properties, design criteria, and worked examples to illustrate the code's application to bridge elements like beams, slabs, foundations and composite construction.
Design of box
The document provides design details for a box culvert with internal dimensions of 3m x 3m. It includes specifications for parameters like live load, soil unit weight, concrete strength, reinforcement sizes and spacing. The design considers three load cases - dead and live load from outside with no water pressure inside; dead and live load from outside with water pressure inside; and dead load with water and earth pressure from outside. Moment distribution is used to calculate bending moments in the members under different load combinations. Reinforcement is designed to resist these bending moments.
ANALYSIS & DESIGN OF G+3 STORIED REINFORCED CONCRETE BUILDING
This document provides an analysis and design summary for a G+3 storied reinforced concrete building project. It outlines the aims, requirements, methodology, codes, and steps used for the structural design. Load combinations are defined according to Indian codes for gravity, seismic, and limit state design. Analysis was performed using STAAD Pro software, including modal analysis and equivalent static analysis. Results such as member forces, reactions, and concrete quantities are presented and compared to hand calculations. The summary provides an overview of the process and outcomes of analyzing and designing the main structural elements of the multi-story building.
Building suerface finishes
This document provides details on various concrete surface finish techniques and materials. It discusses stucco/cement plaster finishes applied in scratch, brown, and finish coats. Other concrete finishes discussed include rubbed finish, brushed finish, tooled finish, sand-blasted finish, exposed aggregate finish, steel-troweled finish, and integral colored-cement finish. Granolithic and terrazzo floor finishes are also summarized. The document concludes with sections on tile finishes including cement tile, ceramic tile, and resilient floor finishes such as asphalt and vinyl tiles and sheets.
Works department odisha (rate chart 2014)
The document is a memorandum from the Government of Odisha Works Department announcing revisions to the Schedule of Rates for 2014 for 13 undivided districts in Odisha. It states that market prices for materials and labor rates have increased, necessitating an update to the existing Schedule of Rates. The new Schedule of Rates-2014 and supporting analysis are effective immediately and will be made available online. Various departments are copied on the memorandum for information and necessary action regarding implementation and circulation of the new rates.
22914162 the-indian-contract-act-1872
The document discusses the key concepts in Indian contract law such as contract, agreement, offer, acceptance, consideration, capacity to contract, free consent, and validity of contracts.
Some key points covered are:
1. A contract is an agreement that is enforceable by law. There must be an offer and acceptance, intention to create a legal relationship, consideration, free consent and capacity to contract for an agreement to become a valid contract.
2. Essentials of a valid contract include offer, acceptance, intention to create legal relations, consideration, capacity of parties, free consent, lawful object and possibility of performance.
3. Consent is said to be free only when not caused by coercion
200 questions answers
This document provides an overview of a book containing 200 questions and answers on practical civil engineering works. The book is intended to arouse interest in graduate engineers, assistant engineers, and engineers regarding technical aspects of civil engineering projects. It covers topics like bridge works, concrete structures, drainage works, earthworks, piers/marine structures, roadworks, pumping stations, reclamation works, water retaining structures, pipe jacking/microtunneling, piles/foundations, and general civil engineering questions. The author's goal is to explain the reasoning behind common engineering practices to help readers better understand the underlying principles.
Basic civil engineering book
This document provides an overview of traditional building materials used in civil engineering constructions, including stones, bricks, cement, lime, and timber. It describes the different types of stones based on their geological formation (igneous, sedimentary, metamorphic), physical structure (stratified, unstratified, foliated), and chemical composition (silicious, argillaceous, calcareous). The key properties of stones that determine their suitability for construction are discussed, such as strength, texture, density, appearance, hardness, porosity, weathering resistance, and ease of dressing. Common stones used in India like granite, trap, basalt, slate, marble, sandstone, and laterite are compared in terms of
30 minutes before a job interview
This document provides tips and advice for preparing for and attending a job interview. It emphasizes the importance of being on time, dressing appropriately, researching the company, practicing interview questions, and having the right materials prepared. The key points are to make a good first impression, be prepared, and sell yourself as the best candidate for the job.
Cracks in-buildings
This document discusses various types and causes of cracks in buildings. It classifies cracks as either structural or non-structural and further categorizes them based on their width. Common causes of cracks include moisture movement, thermal variation, excessive loading, and foundation settlement. Plastic shrinkage, bleeding, delayed curing, and use of poor quality materials can lead to cracks in concrete before it hardens. Thermal expansion and contraction from temperature changes is another major cause of cracks. Various remedial measures are proposed to prevent or reduce cracking in structures.
investigation of low cost concrete using industrial waste as supplimentry cem...
investigation of low cost concrete using industrial waste as supplimentry cem...Abhilash Chandra Dey
presentation on investigation of low cost concrete using industrial waste as supplimentry cementitious material1442 site investigation 325
The document discusses site investigation, which involves gathering subsurface information about a proposed construction project location. It describes the purpose, scope, and stages of a site investigation. The typical stages are a desk study, preliminary investigation including some boreholes, a detailed investigation with more boreholes and sampling, and monitoring during construction. Common investigation methods discussed are the standard penetration test, cone penetration test, and sampling techniques.
seminar report on concrete using of cementitios supplymentary material
This document is a seminar report on investigating low-cost concrete using industrial waste as supplementary cementitious material. It was presented by Abhilash Chandra Dey to fulfill the requirements for a Bachelor of Technology in Civil Engineering from Veer Surendra Sai University of Technology, Sambalpur, India. The report discusses using hypo sludge and fly ash as partial replacements for cement in concrete mixes at various percentages. It describes designing an M20 grade concrete mix based on Indian standards as the control mix, and mixes replacing 10-40% of cement with industrial waste. The report presents results on the workability, compressive strength, and cost of the various mixes to determine the optimum replacement level.
More from Abhilash Chandra Dey (15)
STUDY OF MECHANICAL AND DURABILITY PROPERTIES OF GEOPOLYMER CONCRETE
STUDY OF MECHANICAL AND DURABILITY PROPERTIES OF GEOPOLYMER CONCRETE
My project work(analysis and design of g+3 building)
My project work(analysis and design of g+3 building)
ANALYSIS & DESIGN OF G+3 STORIED REINFORCED CONCRETE BUILDING
ANALYSIS & DESIGN OF G+3 STORIED REINFORCED CONCRETE BUILDING
investigation of low cost concrete using industrial waste as supplimentry cem...
investigation of low cost concrete using industrial waste as supplimentry cem...
seminar report on concrete using of cementitios supplymentary material
seminar report on concrete using of cementitios supplymentary material
Recently uploaded
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our desired pressure
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Software Engineering and Project Management - Software Testing + Agile Method...
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
Recently uploaded (20)
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our d...
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Software Engineering and Project Management - Software Testing + Agile Method...
Software Engineering and Project Management - Software Testing + Agile Method...