Get the details about wall care putty manufacturers and suppliers with there complete details. We have a large list of manufacturers and exporters from india.
This document provides information on various coating products from Dekro including decorative, industrial, and specialized coatings as well as primers. It describes several products such as Super Fibretex coating which provides a slight texture without being too rough, Ultra QD Hammertone finishes used for electrical components and machinery, and Tuffcoat epoxy coating that requires minimal surface preparation and offers excellent corrosion resistance. It also mentions the importance of waterproofing and recommends consulting Dekro for suitable waterproofing products.
This document provides details on various concrete surface finish techniques and materials. It discusses stucco/cement plaster finishes applied in scratch, brown, and finish coats. Other concrete finishes discussed include rubbed finish, brushed finish, tooled finish, sand-blasted finish, exposed aggregate finish, steel-troweled finish, and integral colored-cement finish. Granolithic and terrazzo floor finishes are also summarized. The document concludes with sections on tile finishes including cement tile, ceramic tile, and resilient floor finishes such as asphalt and vinyl tiles and sheets.
Mx Cool Guard is a single component modified acrylic powder cool roof coating that is made on site by mixing the powder with water at a 2:1.5 ratio. It can be applied alone or as a base coat under Mx Cool Top, which is a bright white cool roof top coat with an SRI of 109 and coverage of 120 sq ft per coat per liter. Nano Stone Wash is a liquid solution that dissolves and removes salt efflorescence from bricks and stone facades with a coverage depending on the amount of efflorescence present.
Wall finishes provide decorative coverings for walls, ceilings and floors and conceal building components. Common internal wall finishes include plaster, paint, wallpaper, wood panelling, cement plaster, laminate, tiles and mirrors. Finishes are either self finishes that are inherent in the material or applied finishes that require application on site. Factors like intended use, maintenance needs and durability must be considered when selecting wall finishes. Proper application and allowing finishes to fully dry is important to prevent damage.
This document discusses different types of wall coverings used for interior decoration. It describes nine main types: paint, wallpaper, wooden wall covering, fabric wall covering, metal wall covering, glass wall covering, ceramic tiles, stone wall covering, and vinyl/plastic wall covering. Each type is briefly characterized, such as wallpaper being made of rolls that are hung vertically, or ceramic tiles being flat slabs made of materials like porcelain.
This document provides information on ISOMAT's microcement product range for floors and walls. It discusses how microcement offers a modern yet traditional material that can be used to create unique interior and exterior spaces. The document outlines the various microcement coating products, their advantages, colors available, application process, and protective sealants. It positions microcement as a versatile and customizable solution for renovations and new construction projects.
This document discusses various surface finishing materials used in construction including stone, plaster, ceramic tiles, facing tiles, ACP sheets, wood, and glass. It then provides details on properties of different types of exterior cladding such as timber cladding, stone cladding, weatherboard cladding, vinyl cladding, metal cladding, concrete cladding, and stucco. The document also discusses types of exterior paints, properties of ceramic tiles, brick tiles, ACP, wood, fiber reinforced plastics, strength and aesthetic properties of glass.
Get the details about wall care putty manufacturers and suppliers with there complete details. We have a large list of manufacturers and exporters from india.
This document provides information on various coating products from Dekro including decorative, industrial, and specialized coatings as well as primers. It describes several products such as Super Fibretex coating which provides a slight texture without being too rough, Ultra QD Hammertone finishes used for electrical components and machinery, and Tuffcoat epoxy coating that requires minimal surface preparation and offers excellent corrosion resistance. It also mentions the importance of waterproofing and recommends consulting Dekro for suitable waterproofing products.
This document provides details on various concrete surface finish techniques and materials. It discusses stucco/cement plaster finishes applied in scratch, brown, and finish coats. Other concrete finishes discussed include rubbed finish, brushed finish, tooled finish, sand-blasted finish, exposed aggregate finish, steel-troweled finish, and integral colored-cement finish. Granolithic and terrazzo floor finishes are also summarized. The document concludes with sections on tile finishes including cement tile, ceramic tile, and resilient floor finishes such as asphalt and vinyl tiles and sheets.
Mx Cool Guard is a single component modified acrylic powder cool roof coating that is made on site by mixing the powder with water at a 2:1.5 ratio. It can be applied alone or as a base coat under Mx Cool Top, which is a bright white cool roof top coat with an SRI of 109 and coverage of 120 sq ft per coat per liter. Nano Stone Wash is a liquid solution that dissolves and removes salt efflorescence from bricks and stone facades with a coverage depending on the amount of efflorescence present.
Wall finishes provide decorative coverings for walls, ceilings and floors and conceal building components. Common internal wall finishes include plaster, paint, wallpaper, wood panelling, cement plaster, laminate, tiles and mirrors. Finishes are either self finishes that are inherent in the material or applied finishes that require application on site. Factors like intended use, maintenance needs and durability must be considered when selecting wall finishes. Proper application and allowing finishes to fully dry is important to prevent damage.
This document discusses different types of wall coverings used for interior decoration. It describes nine main types: paint, wallpaper, wooden wall covering, fabric wall covering, metal wall covering, glass wall covering, ceramic tiles, stone wall covering, and vinyl/plastic wall covering. Each type is briefly characterized, such as wallpaper being made of rolls that are hung vertically, or ceramic tiles being flat slabs made of materials like porcelain.
This document provides information on ISOMAT's microcement product range for floors and walls. It discusses how microcement offers a modern yet traditional material that can be used to create unique interior and exterior spaces. The document outlines the various microcement coating products, their advantages, colors available, application process, and protective sealants. It positions microcement as a versatile and customizable solution for renovations and new construction projects.
This document discusses various surface finishing materials used in construction including stone, plaster, ceramic tiles, facing tiles, ACP sheets, wood, and glass. It then provides details on properties of different types of exterior cladding such as timber cladding, stone cladding, weatherboard cladding, vinyl cladding, metal cladding, concrete cladding, and stucco. The document also discusses types of exterior paints, properties of ceramic tiles, brick tiles, ACP, wood, fiber reinforced plastics, strength and aesthetic properties of glass.
This document discusses the complex properties of concrete and how to properly paint it. It explains that concrete is an ideal transmitter of moisture due to capillary action, and will try to equalize temperature and humidity on both sides. This can cause issues for paint adhesion and moisture-related problems. The document also summarizes the history of solvent-based and water-based concrete stains, and how more permeable water-based stains can lead to failures from efflorescence. It recommends using a pore-blocking sealer prior to painting to protect the concrete from moisture and efflorescence.
Wall coverings come in many forms including paints, wallpaper, fabrics, wood, and tiles. The type of wall covering chosen depends on the type of wall, such as brick, plaster, or new plaster walls. Common wall covering materials include paints like emulsion, distemper, cement, and aluminum paints; wallpapers that can be surface printed, washable, or embossed; fabric coverings that are stretched or draped; wood paneling in various textures; and ceramic or mosaic tiles. Proper installation and periodic cleaning and maintenance helps wall coverings last.
Wall finishes are used to enhance the interior or exterior appearance of structures. Common wall finishes include paint, wallpaper, tiles, and panels made of materials like wood, stone and glass. Proper installation and maintenance of wall finishes is important. Various techniques are used for different types of wall finishes to achieve unique aesthetic effects. Common types of wall finishes mentioned are cement texture finish, plaster of Paris finish, gypsum plaster finish, glass mosaic finish, laminate finish and marble powder finish.
This slide contains various types of plastering and cement for buildings.
It is useful for both Engineering and Architecture Students for education . Presented by Lakshmi Kumari.R,School Of Architecture,CIET.
This document discusses various wall finishes and patterns. It describes different types of finishes like cement textured, plastered, wood panels, and plywood that can be used on walls. It also discusses plaster finishes like plaster of Paris and gypsum plaster. Other finishes mentioned include laminate, marble powder, wallpapers, fabrics, and cork. The document also covers decorative paint techniques like transparent layers, trompe l'oeil, stenciling, and distressing. Finally, it summarizes mosaics, murals, graffiti style murals, and tile murals as wall covering options.
This document discusses various types of wall finishes and coatings used for interior and exterior surfaces. It describes common finishes like plaster, roughcast plaster, sand faced plaster and their application processes. It also summarizes different types of paints used on walls, their constituents and purposes. Defects in plaster and painting work are outlined as well.
Plaster is a building material used to coat walls and ceilings, composed of lime, gypsum, sand and water. It is used to protect surfaces, give a smooth finish, and provide decoration. There are two main types of plaster: sand faced plaster which has a smooth finish, and rough cast plaster which has an uneven texture. Paints are made from pigments, binders and solvents and serve protective and decorative purposes on interior and exterior surfaces like walls, bricks and metal. Common types include acrylic, emulsion, enamel and oil-based paints, which are used for different applications depending on their properties. Wallpapers are used to beautify interior walls and provide an attractive appearance, and can be made
Everest Composites Pvt. Ltd. is a manufacturer of building construction products since 1990 known for its technological capabilities. It delivers unmatched quality products and services through leveraging industry expertise and stringent standards. The company's vision is to establish itself as a leading manufacturer of innovative, cost-effective, high-quality products through continued technological innovation and manufacturing strategies. Its mission is to deliver greater value, reliability, and exceptional quality through consistent innovation to become a market leader in composite materials.
CEMSCREED FAIRING COAT is a single component acrylic polymer modified repair mortar for use as a "Fairing Coat”. When mixed with water, as directed, a fine grey trowellable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. CEMSCREED FAIRING COAT is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section. Adhesion to concrete and flexibility are excellent.
Topic plastic as building material (flooring & wall finishes)Hachin Gautam
The document discusses plastic as a building material for wall and floor finishes. It provides details on the types of plastics used, including polypropylene, polystyrene, acrylonitrile butadiene styrene, and others. It also discusses various plastic products used in construction, such as adhesives, sealants, roofing materials, pipes, and cladding panels. For wall finishes specifically, the document outlines plastics used like paints, wallpaper, and PVC panels. It also discusses vinyl, wood polymer composite, and stone polymer composite flooring options made from plastics.
Finishing works (Building Construction)Zairul Zaiky
This document discusses finishing works in building construction. It focuses on plastering as a type of wall finishing. Plastering functions to protect and cover basic work, produce a flat surface, protect from climate effects, provide a base for paint or tiles, increase durability, and provide comfort. Plastering of internal walls involves base and finish coat layers applied with trowels, while external walls involve thicker, rougher base and finish coats. Different types of materials like cement, lime, sand, and water are used for plastering. Floor finishes can also include tiles made from materials like thermoplastic, vinyl, cork, clay, quarry, and terrazzo.
This document discusses the cladding of buildings. It defines cladding as an external finish applied to improve a building's appearance and resistance to weathering. The main purposes of cladding are to separate the indoor and outdoor environments and maintain suitable indoor conditions by preventing water, air, light, noise, and fire penetration. It also discusses the types of cladding units and how cladding must withstand wind loads and structural movements without cracking.
Clay brick is now expensive due to cost of indirect
materials of wood materials, transportation cost and
labor cost. The process of burning bricks emits (CO2)
carbon dioxide to the environmental so this causes
environmental problems. Preparation of clay bricks
consumes less time and energy but as the clay brick to
burning in the kiln to time and energy consumed.
Environmental effect transportation and other
constraints make the use of clay bricks less attractive.
PET Bottle can last as long as 300 years (undoubtedly
longer than the cement used to bind the bottles
together in the walls and columns). Clay bricks are set
to be affected by vegetation, over burning, etc. But the
pet bottle brick may not affected by vegetation,
because it was covered by the mud or sands inside of
the pet bottles. So there is no vegetation growth in
structures. When compared to pet bottles there are no
such drawbacks. Especially the plastic wastes in
environmental is to be reduced because it reduces the
vegetation growth and it does not decompose soon.
Zinc-alloy stone coated tiles have several advantages over traditional clay or concrete tiles. They are more durable and stylish as the materials are resistant to fading, cracking, and leaks. Stone coated tiles are also lighter weight, easier to install, and more environmentally friendly as they allow for water harvesting. Unlike clay tiles that require replacement over time, stone coated tiles are maintenance free and provide a 50-year warranty. They are available in various profiles and colors to suit different architectural needs.
This document describes Everest Composites' modular insulated panel products called Evercool. Evercool panels can be used as portable site offices, stores, security cabins, and more. They are made from premium raw materials and designed for high aesthetic value both interior and exterior. Evercool panels offer strong, sturdy construction while being durable, economical, and low maintenance with termite and corrosion resistance. They provide an efficient work environment and can be quickly installed and detached to save on site movement costs and expenses.
Gypsum is a soft sulfate mineral composed of calcium sulfate dihydrated. It is commonly found in nature and can be extracted and processed for use in construction. The manufacturing process of plaster of Paris (calcium sulfate hemihydrate) involves mining gypsum rock, crushing it, drying and powdering it, then calcining it at high temperatures to remove water molecules. This is then cooled, pulverized, and packaged for use. Plaster of Paris has various advantages for construction and decoration including being lightweight, fire resistant, and easy to work with.
This document discusses different types of small unit cladding that can be fixed to structural backing walls. It describes tile, timber, and stone cladding. Tile cladding involves fixing clay tiles to timber battens on the wall for decoration and weather protection. Timber cladding uses molded boards fixed to battens for decoration, but requires more maintenance. Stone cladding like marble and granite provides excellent durability but is more expensive to install due to cutting and polishing costs. It also requires strong backing and fixing bars due to its weight.
Gypsum is a mineral found in the earth's crust that is extracted and processed for use in construction. It has been used since ancient times by the Egyptians. Gypsum rock is mined, crushed, ground, and heated to remove water, producing plaster of paris or anhydrous gypsum. Modern uses include gypsum board/drywall, plasters, and prefabricated building materials. Gypsum board is made through a process of mixing calcined gypsum into a slurry between paper layers. Gypsum products have beneficial fire resistance, sound insulation, humidity regulation, and ease of installation properties well-suited for construction applications.
Gypsum products like gypsum board, suspended ceilings, gypsum plaster, and accessories were discussed. Gypsum board is a common interior finish made of gypsum plaster pressed between paper sheets. It is used for interior walls and ceilings. Suspended ceilings made of gypsum board panels provide benefits like insulation, aesthetics, and acoustics. Gypsum plaster, also called plaster of paris, is used for wall finishes and has advantages over traditional cement plaster like lighter weight, faster application without curing, and a smooth finish.
This document provides information on FOAMCRETE, a natural organic foaming agent developed by SUBONEYO for producing cellular lightweight concrete (CLC). FOAMCRETE produces stable foam using compressed air and can be pumped and cast. It causes no chemical reactions or emissions. FOAMCRETE is highly water soluble, biodegradable, non-toxic, and cost-effective. It can be used to produce foam concrete with densities ranging from 250-1800kg/m3 for applications like insulation, void filling, and load-bearing building elements.
Luxture Surface Coatings Pvt. Ltd. is an ISO 9001:2000 certified company that offers various surface coating products including textures, flakes, granules, roller coat, rustic finishes, granula, stone finish, synthetic fiber plaster, and T.D.L. finishes. The document provides details on the composition, application process, and specifications for each product type. It also lists many major projects that Luxture has worked on involving government buildings, hospitals, factories, and other commercial and residential buildings.
This document discusses the complex properties of concrete and how to properly paint it. It explains that concrete is an ideal transmitter of moisture due to capillary action, and will try to equalize temperature and humidity on both sides. This can cause issues for paint adhesion and moisture-related problems. The document also summarizes the history of solvent-based and water-based concrete stains, and how more permeable water-based stains can lead to failures from efflorescence. It recommends using a pore-blocking sealer prior to painting to protect the concrete from moisture and efflorescence.
Wall coverings come in many forms including paints, wallpaper, fabrics, wood, and tiles. The type of wall covering chosen depends on the type of wall, such as brick, plaster, or new plaster walls. Common wall covering materials include paints like emulsion, distemper, cement, and aluminum paints; wallpapers that can be surface printed, washable, or embossed; fabric coverings that are stretched or draped; wood paneling in various textures; and ceramic or mosaic tiles. Proper installation and periodic cleaning and maintenance helps wall coverings last.
Wall finishes are used to enhance the interior or exterior appearance of structures. Common wall finishes include paint, wallpaper, tiles, and panels made of materials like wood, stone and glass. Proper installation and maintenance of wall finishes is important. Various techniques are used for different types of wall finishes to achieve unique aesthetic effects. Common types of wall finishes mentioned are cement texture finish, plaster of Paris finish, gypsum plaster finish, glass mosaic finish, laminate finish and marble powder finish.
This slide contains various types of plastering and cement for buildings.
It is useful for both Engineering and Architecture Students for education . Presented by Lakshmi Kumari.R,School Of Architecture,CIET.
This document discusses various wall finishes and patterns. It describes different types of finishes like cement textured, plastered, wood panels, and plywood that can be used on walls. It also discusses plaster finishes like plaster of Paris and gypsum plaster. Other finishes mentioned include laminate, marble powder, wallpapers, fabrics, and cork. The document also covers decorative paint techniques like transparent layers, trompe l'oeil, stenciling, and distressing. Finally, it summarizes mosaics, murals, graffiti style murals, and tile murals as wall covering options.
This document discusses various types of wall finishes and coatings used for interior and exterior surfaces. It describes common finishes like plaster, roughcast plaster, sand faced plaster and their application processes. It also summarizes different types of paints used on walls, their constituents and purposes. Defects in plaster and painting work are outlined as well.
Plaster is a building material used to coat walls and ceilings, composed of lime, gypsum, sand and water. It is used to protect surfaces, give a smooth finish, and provide decoration. There are two main types of plaster: sand faced plaster which has a smooth finish, and rough cast plaster which has an uneven texture. Paints are made from pigments, binders and solvents and serve protective and decorative purposes on interior and exterior surfaces like walls, bricks and metal. Common types include acrylic, emulsion, enamel and oil-based paints, which are used for different applications depending on their properties. Wallpapers are used to beautify interior walls and provide an attractive appearance, and can be made
Everest Composites Pvt. Ltd. is a manufacturer of building construction products since 1990 known for its technological capabilities. It delivers unmatched quality products and services through leveraging industry expertise and stringent standards. The company's vision is to establish itself as a leading manufacturer of innovative, cost-effective, high-quality products through continued technological innovation and manufacturing strategies. Its mission is to deliver greater value, reliability, and exceptional quality through consistent innovation to become a market leader in composite materials.
CEMSCREED FAIRING COAT is a single component acrylic polymer modified repair mortar for use as a "Fairing Coat”. When mixed with water, as directed, a fine grey trowellable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. CEMSCREED FAIRING COAT is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section. Adhesion to concrete and flexibility are excellent.
Topic plastic as building material (flooring & wall finishes)Hachin Gautam
The document discusses plastic as a building material for wall and floor finishes. It provides details on the types of plastics used, including polypropylene, polystyrene, acrylonitrile butadiene styrene, and others. It also discusses various plastic products used in construction, such as adhesives, sealants, roofing materials, pipes, and cladding panels. For wall finishes specifically, the document outlines plastics used like paints, wallpaper, and PVC panels. It also discusses vinyl, wood polymer composite, and stone polymer composite flooring options made from plastics.
Finishing works (Building Construction)Zairul Zaiky
This document discusses finishing works in building construction. It focuses on plastering as a type of wall finishing. Plastering functions to protect and cover basic work, produce a flat surface, protect from climate effects, provide a base for paint or tiles, increase durability, and provide comfort. Plastering of internal walls involves base and finish coat layers applied with trowels, while external walls involve thicker, rougher base and finish coats. Different types of materials like cement, lime, sand, and water are used for plastering. Floor finishes can also include tiles made from materials like thermoplastic, vinyl, cork, clay, quarry, and terrazzo.
This document discusses the cladding of buildings. It defines cladding as an external finish applied to improve a building's appearance and resistance to weathering. The main purposes of cladding are to separate the indoor and outdoor environments and maintain suitable indoor conditions by preventing water, air, light, noise, and fire penetration. It also discusses the types of cladding units and how cladding must withstand wind loads and structural movements without cracking.
Clay brick is now expensive due to cost of indirect
materials of wood materials, transportation cost and
labor cost. The process of burning bricks emits (CO2)
carbon dioxide to the environmental so this causes
environmental problems. Preparation of clay bricks
consumes less time and energy but as the clay brick to
burning in the kiln to time and energy consumed.
Environmental effect transportation and other
constraints make the use of clay bricks less attractive.
PET Bottle can last as long as 300 years (undoubtedly
longer than the cement used to bind the bottles
together in the walls and columns). Clay bricks are set
to be affected by vegetation, over burning, etc. But the
pet bottle brick may not affected by vegetation,
because it was covered by the mud or sands inside of
the pet bottles. So there is no vegetation growth in
structures. When compared to pet bottles there are no
such drawbacks. Especially the plastic wastes in
environmental is to be reduced because it reduces the
vegetation growth and it does not decompose soon.
Zinc-alloy stone coated tiles have several advantages over traditional clay or concrete tiles. They are more durable and stylish as the materials are resistant to fading, cracking, and leaks. Stone coated tiles are also lighter weight, easier to install, and more environmentally friendly as they allow for water harvesting. Unlike clay tiles that require replacement over time, stone coated tiles are maintenance free and provide a 50-year warranty. They are available in various profiles and colors to suit different architectural needs.
This document describes Everest Composites' modular insulated panel products called Evercool. Evercool panels can be used as portable site offices, stores, security cabins, and more. They are made from premium raw materials and designed for high aesthetic value both interior and exterior. Evercool panels offer strong, sturdy construction while being durable, economical, and low maintenance with termite and corrosion resistance. They provide an efficient work environment and can be quickly installed and detached to save on site movement costs and expenses.
Gypsum is a soft sulfate mineral composed of calcium sulfate dihydrated. It is commonly found in nature and can be extracted and processed for use in construction. The manufacturing process of plaster of Paris (calcium sulfate hemihydrate) involves mining gypsum rock, crushing it, drying and powdering it, then calcining it at high temperatures to remove water molecules. This is then cooled, pulverized, and packaged for use. Plaster of Paris has various advantages for construction and decoration including being lightweight, fire resistant, and easy to work with.
This document discusses different types of small unit cladding that can be fixed to structural backing walls. It describes tile, timber, and stone cladding. Tile cladding involves fixing clay tiles to timber battens on the wall for decoration and weather protection. Timber cladding uses molded boards fixed to battens for decoration, but requires more maintenance. Stone cladding like marble and granite provides excellent durability but is more expensive to install due to cutting and polishing costs. It also requires strong backing and fixing bars due to its weight.
Gypsum is a mineral found in the earth's crust that is extracted and processed for use in construction. It has been used since ancient times by the Egyptians. Gypsum rock is mined, crushed, ground, and heated to remove water, producing plaster of paris or anhydrous gypsum. Modern uses include gypsum board/drywall, plasters, and prefabricated building materials. Gypsum board is made through a process of mixing calcined gypsum into a slurry between paper layers. Gypsum products have beneficial fire resistance, sound insulation, humidity regulation, and ease of installation properties well-suited for construction applications.
Gypsum products like gypsum board, suspended ceilings, gypsum plaster, and accessories were discussed. Gypsum board is a common interior finish made of gypsum plaster pressed between paper sheets. It is used for interior walls and ceilings. Suspended ceilings made of gypsum board panels provide benefits like insulation, aesthetics, and acoustics. Gypsum plaster, also called plaster of paris, is used for wall finishes and has advantages over traditional cement plaster like lighter weight, faster application without curing, and a smooth finish.
This document provides information on FOAMCRETE, a natural organic foaming agent developed by SUBONEYO for producing cellular lightweight concrete (CLC). FOAMCRETE produces stable foam using compressed air and can be pumped and cast. It causes no chemical reactions or emissions. FOAMCRETE is highly water soluble, biodegradable, non-toxic, and cost-effective. It can be used to produce foam concrete with densities ranging from 250-1800kg/m3 for applications like insulation, void filling, and load-bearing building elements.
Luxture Surface Coatings Pvt. Ltd. is an ISO 9001:2000 certified company that offers various surface coating products including textures, flakes, granules, roller coat, rustic finishes, granula, stone finish, synthetic fiber plaster, and T.D.L. finishes. The document provides details on the composition, application process, and specifications for each product type. It also lists many major projects that Luxture has worked on involving government buildings, hospitals, factories, and other commercial and residential buildings.
Fly ash bricks are manufactured using fly ash, lime, quarry dust, and gypsum. These materials are mixed together and formed into bricks using hydraulic brick making machines. The bricks are then dried and cured for 14 days before testing and sorting. Fly ash bricks have several advantages over traditional clay bricks such as uniform appearance, higher strength, lighter weight, lower water absorption, and better thermal and acoustic insulation. They also help reduce environmental pollution by using an industrial waste product.
Non metallic floor hardener - arda indiaJames Brown
Floor Hardener: Arda Polymers Pvt. Ltd. (Arda India) offered range of Non-Metallic Floor Hardeners is exclusively used for the watering Flooring systems.
At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
The document provides information on sustainable material options for various interior elements, including floor coverings, wall finishes, ceiling finishes, and furniture materials. It describes recycled glass tiles, sustainable cork flooring, coconut timber flooring, green concrete, natural woolen carpet, slate-ish wall finishes, natural clay plasters, eco stucco, coco tiles, sustainable paints, recycled ceiling tiles, bamboo ceiling tiles, stretch ceiling tiles, and crystal foldscape ceiling tiles. For each material, it highlights their sustainable attributes such as being made from recycled or renewable sources, having low VOC emissions, and providing indoor environmental benefits. Recommended product sources are also provided.
This document provides information on Ermine Wood Coatings produced by Sansui Paints. It begins with an overview of the company's standard industrial wood finish product range and notes customized options are available. Later, it focuses on Ermine, a natural finish coating that enhances wood grain while protecting from heat, water and climate. Ermine Liau is introduced as a water-borne coating for exterior wood furniture that is environmentally-friendly and offers advantages over solvent-borne products like fungicides and ease of use. The document concludes by listing Sansui Paints' wood coating product lines including waterborne lacquers, polyurethane coatings, and stains.
Sealing stamped concrete protects the surface from damage and fading. A sealer forms a protective barrier that repels stains, chemicals, and water. It should be reapplied annually for maximum protection. Sealers are available in different finishes from matte to glossy, and may be tinted to enhance color. Applying sealer involves cleaning the surface, allowing it to fully dry, then rolling on one or two coats according to temperature conditions.
To most people, paint is the colour on the walls of their home, the colour of their car, bike or any object which a person can relate to in his Daily Life but, Paint is more than just the colour though, it is a colored substance which is spread over a surface and is left to dry to leave a thin decorative, colored & protective coating film. Higher the Paint Quality Higher the Preparation Of Base
DUROCRET-DECO is a polymer-modified, fiber-reinforced cement-based mortar that can be used to create decorative interior and exterior surfaces. It has advantages such as a friendly aesthetic, bioclimatic properties, affordability, abrasion and crack resistance, water impermeability, and strong bonding. It is available in multiple colors and can be used to form surfaces with various textures and geometries. DUROCRET-DECO is suitable for applications like fireplaces, furniture, and sanitary fixtures. It provides an economic solution for decorating new and existing construction projects.
Floors are an important part of any building that require both functional and decorative considerations. They cover a large area and experience significant wear. Proper flooring selection depends on factors like appearance, comfort, durability, ease of maintenance, safety, and cost. Hard flooring options include concrete, marble, terrazzo, vinyl, asphalt, rubber, and linoleum. Wood floors can also be used. Regular cleaning and maintenance of floors is important. Methods include mopping, buffing, burning, scrubbing, stripping, and refinishing.
This document outlines various coating services provided including epoxy flooring, polyurethane coating, anti-corrosive coating, high build epoxy, hygienic coating, and waterproofing. Epoxy provides a hard, durable surface resistant to chemicals and abrasion. Polyurethane coating protects surfaces from elements through an impermeable barrier, and reduces noise. High build epoxy offers a glossy, hygienic floor coating in various thicknesses. Hygienic coating creates safe, durable, and easy to clean floors and walls for industrial use.
This document outlines various coating services provided including epoxy flooring, polyurethane coating, anti-corrosive coating, high build epoxy, hygienic coating, and waterproofing. Epoxy flooring provides a hard-wearing, long-lasting protective coating that is easy to apply and clean. Polyurethane coating offers protection, noise reduction, no toxic emissions, and is easy to apply. High build epoxy provides a glossy, hygienic, easy to clean surface resistant to wear and chemicals. Hygienic coating reduces bacteria growth and provides a durable, seamless, easy to clean surface.
The document describes a series of new nano-ceramic coating products made from synthetic nano-ceramic materials and rare earth elements. The coatings have several beneficial properties including being environmentally friendly, non-toxic, fire resistant, durable, and acid/base tolerant. The coatings can be used for waterproofing, chemical resistance, and self-cleaning of cement and other inorganic materials. The document provides details on the different product lines including transparent wall coatings, colored wall coatings, floor hardeners, colored floor coatings, imitation stone coatings, and special cement products. It also gives examples of construction methods and application areas for each product type.
The document discusses SPC rigid core flooring developed by Beautex Wood. It is a new type of flooring that is waterproof, wear resistant, and produces no formaldehyde emissions. As a floating floor, it is quick to install and can be used in places that laminate wood flooring cannot, like kitchens and bathrooms. SPC flooring uses advanced composite materials to provide durability, dimensional stability, noise reduction, stain resistance, fire prevention, anti-slip properties, and easy maintenance compared to laminate wood or wood plastic composite flooring.
Fiber cement cladding panels provide fireproof and durable interior cladding for buildings. They resist insects, rotting, and mold. UV coated fiber cement cladding panels last 40 years through a coating that reinforces durability and fireproof performance. They are waterproof, customizable, come in various colors and textures, require zero maintenance, and are suitable for cladding homes and commercial spaces. Beijing Hocreboard Building Materials produces UV coated fiber cement cladding panels with high hardness, fire resistance, water resistance, and a 40-year limited lifetime.
This document summarizes the features and benefits of Quick Stone flooring. It is a flooring material made of natural marble, CRC board for shock absorption, and thermosetting plastic. It can be installed like wood flooring without seams. Quick Stone flooring is durable, easy to repair, improves impact resistance over natural marble or wood, and has high heat efficiency to reduce heating costs. It is available in 9 colors and various patterns for floors, walls, and other applications.
Vermiculite Production line for expanded materialsLiGary3
Vermiculite is a mineral that expands when heated and is used for various horticultural and industrial purposes. It is mined from open cast mines and then processed through various equipment like crushers, screens, rotary kilns, and dryers. After exfoliation in high temperatures, vermiculite is used as an additive to improve soil quality, as a fire retardant, insulation material, and packing medium due to its lightweight and absorbent properties. It is also used to make plasters, concrete products, and refractory materials that can withstand high temperatures.
This document provides information about various types of paints:
- It describes different types of paints classified by base used (oil, alkyd, latex, epoxy) and properties (rust inhibiting, fire retardant, heat resistant, intumescent).
- Primers, sealers, emulsions, enamels, texture paints, cement paints, and their uses are outlined.
- The painting process including surface preparation, primer coating, putty coat, finish coats and methods of application are summarized.
- Specific paint product lines from Berger including those for exterior, interior, metal, wood and children are named.
- The document concludes with information on lead in paint
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...ABHILASH DUTTA
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
1. Phomi MCM Products- Unique Characteristic ofClayBasedProduct
1. MCM products are made from revolutionary patented natural clay based composite material without toxic additives or hazardous
chemicals.
2. Unlike traditional paints, tiles, stones and timber products that require highly polluting processing, Phomi MCM products are
produced via low carbon footprint and near zero emission proprietary manufacturing know-how that help safeguard the
environment.
3. MCM products retain the unique characteristic of clay-based product that can absorb moisture and odours such as formaldehyde
from the ambient.
4. This humidity adjustment feature contributing to better indoor temperature control gives MCM products an edge over other
building materials.
5. MCM products are UV and fade resistant eco-friendly green product. However as with any natural stones or homogeneous tiles
products, colour variation is inherent showcasingits naturalorigin.
6. With its 8% to 15% moisture absorption capacity, the product colour will turn darker when ambient humidity is high (e.g. when
installed in washroom or external wall during rainy days) and will revert back to its original colour tone after evaporation of the
absorbedmoisture.
7. PhomiMCM products comewith unique non-repetitive products’ profile producing all-natural effects after installation.
8. The products may incorporate purposely designed surface dents, pores or punctual holes of varying shapes and depth or even
jagged edge requiring appropriate arrangement when installing as for any rustic natural stone products which should not be taken
asdefects in the products.
9. MCM products are purposely crafted with varying thickness of 1 to 2mm difference across to enhance its all- natural visual effects
after installation which should not be taken asdefects inthe products.
10. If a more even surface finish is desired, the varying thickness can be reduced by applying the appropriate amount of adhesive
compound to compensate forvariance when installing.
11. Being a thin and light clay-based product, care should be taken not to bend the edges or fold the products beyond 90°and to
prevent from scratchesby sharp objects which will damagetheproduct.
12. MCM products are both acid and alkali resistant able to withstand exposure to common household acids and alkalis. To prevent
contamination the product should not be stored together with thinner, xylene or other toxic organic solvents with strongodor.
13. As the stronger the foundation will give better impact resistance to MCM products, the strength or weakness of the substrate will
affect the level of impact resistance after installation. Comparing to traditional stone slab and tiles, Phomi Stones products are
more superior and will not break when subject to same impact force which will crack traditional stone slab and tiles laid on
identicalsubstrate.
14. MCM products are easyto clean with just soapandwater. Fortougher stains usemelamine foam or scrub with blade if necessary.
15. MCM products are rated ClassA2for fire resistant.
16. MCM products are environmentally friendly 100%recyclable.