Finishing works (Building Construction)

97,766 views

Published on

3 Comments
48 Likes
Statistics
Notes
No Downloads
Views
Total views
97,766
On SlideShare
0
From Embeds
0
Number of Embeds
27
Actions
Shares
0
Downloads
2,275
Comments
3
Likes
48
Embeds 0
No embeds

No notes for slide

Finishing works (Building Construction)

  1. 1. FINISHING WORKS
  2. 2. INTRODUCTIONFinishing works is a fine job in building construction processwhere it forms the beauty of a building. Several types offinishes can be used based on the materials used,environmental conditions and costs. Finishing of a buildingcan be divided into several sections: Floor finishing Wall finishing Ceiling finishing
  3. 3. PLASTERINGPlastering is one of the finishing of the walls. It functions as a:• Protect / cover the basic work.• Produce a flat surface and neatly.• Protect the basic work of the climate action.• A cushion to the finishing paint work and laying of tiles.• Provide facilities for cleaning.• Increase durability to the work of the foundation.• Provide comfort and safety to the residents who live in it.
  4. 4. PLASTERING CEMENT LIME MATERIALSWATER SAND
  5. 5. PROCEDURES internal WALL plastering1. Layers of "base coat" plastering in the finished brick walls tied. This layer is important because it will absorb water from the layers of "finish coat" that will plastering then that the wall does not look wet. This layer is also aimed at leveling the brick wall bond that are less flat.2. Layer "finish coat" will plastering later on at a thickness of 1/2’ to 1’ depending on the uniformity of the wall using a finishing trowel.3. Finally, the layers of "plaster" will plastering with a layer of oil (slurry cement). This mixture consists of masonry cement and water. This layer that will highlight the aesthetic features of buildings constructed. After the layers of cement "slurry“ plastering, it will be painted with water using a brush to paint fine lines formed at the wall to retain moisture in the plastering. This is necessary so that the paint will stick to the walls painted.
  6. 6. procedures external wall plastering For the exterior wall plastering made ​only involves two layers of the "base coat“ and "finish coat". Made for plastering the walls outside the home is more gross and appeared. After the layers of "finish coat", the external wall is painted with water using a sponge. It aims to reveal more gross wall surface.
  7. 7. EXAMPLE OF PLASTERINGINTERNAL WALL EXTERNAL WALL
  8. 8. RENDERINGRendering works
  9. 9. Floor tilesTHERMOPLASTIC TILES VINYL ASBESTOS
  10. 10. CORK TILES CLAY TILES
  11. 11. QUARRY TILES TERAZZO TILES
  12. 12. THANK YOU

×