EnviroConnect is a web-based environment quality monitoring system that collects data from devices monitoring stack emissions, ambient air quality, and water quality. It allows users to view data in real-time, configure alarm thresholds, generate reports, and send data to pollution control boards. The system is designed according to India's CPCB guidelines and can be deployed either locally or on a nationwide network. It has been implemented in over 50 industries across India to monitor their emissions and effluent quality.
Air Quality Sampling and Monitoring: Stack sampling, instrumentation and methods of analysis of SO2, CO etc, legislation for control of air pollution and automobile
pollution
Air Quality Sampling and Monitoring: Stack sampling, instrumentation and methods of analysis of SO2, CO etc, legislation for control of air pollution and automobile
pollution
It will guide to about the air sampling process which is essential step before you proceed for any type of research regarding air pollution, pollutants and health effects.
Air monitoring legislation is getting stricter. At the beginning of 2018, France made air monitoring mandatory in schools and daycares and the EU top court issued one last warning to the UK, Poland and seven other member states to respect air pollutant limits. Clearly, air monitoring is at the table now and organizations are under pressure to monitor air pollutants continuously.
In this webinar, indoor and outdoor air quality experts, Malak Rizk and Jean-Philippe Monfet provide a brief overview of the state of air quality in the US and the EU and then discuss ways to measure indoor and outdoor air pollutants and EPA recommended factors to keep in mind when choosing an air monitoring device.
Cities operate ambient air quality monitoring networks but often do not analyze and interpret the data. Data gets simply "stacked". Networks are not configured correctly capturing the data trends and monitoring objectives. This presentation provides guidance and uses Mumbai's ambient air quality data to illustrate application
Benefits of Low-Cost Ambient Air Quality Monitoring SystemOizom
Low-cost Continuous Ambient Air Quality Monitoring System (CAAQMS) is compact, lightweight and cost-effective. It provides real-time high precision environment data, with geospatial and ubiquitous monitoring. Low-cost air quality sensors provide 360-degree ambient air monitoring for public awareness. The data can assist in encouraging community participation for air quality monitoring. It is the future of air monitoring in India.
Air Pollution Monitoring in India using Aeroqual Compact Air Quality Monitori...Carl Beck
Learn how a compact air quality monitoring system is being used to monitor ambient air pollution in India. The sensor-based air monitoring station delivers Near Reference air quality data at a third of the cost of traditional reference monitoring stations.
PlantConnect is a web based online monitoring and control tool from Ascent Informatics (India) Pvt. Ltd. It has capability of M2M communication for connecting with multiple devices across geographies and collect live device data. This data can be used for further analytics, reporting and online remote monitoring.
PlantConnect is one of the most advanced IIoT Platforms. It has various products specific to needs, such as Remote Asset Monitoring System (PlantConnect RAMS), PlantConnect SFactory for Real Time Manufacturing Data recording, and analytics, and PlantConnect Insights a Historian, Data Management & Reporting Solution.
It will guide to about the air sampling process which is essential step before you proceed for any type of research regarding air pollution, pollutants and health effects.
Air monitoring legislation is getting stricter. At the beginning of 2018, France made air monitoring mandatory in schools and daycares and the EU top court issued one last warning to the UK, Poland and seven other member states to respect air pollutant limits. Clearly, air monitoring is at the table now and organizations are under pressure to monitor air pollutants continuously.
In this webinar, indoor and outdoor air quality experts, Malak Rizk and Jean-Philippe Monfet provide a brief overview of the state of air quality in the US and the EU and then discuss ways to measure indoor and outdoor air pollutants and EPA recommended factors to keep in mind when choosing an air monitoring device.
Cities operate ambient air quality monitoring networks but often do not analyze and interpret the data. Data gets simply "stacked". Networks are not configured correctly capturing the data trends and monitoring objectives. This presentation provides guidance and uses Mumbai's ambient air quality data to illustrate application
Benefits of Low-Cost Ambient Air Quality Monitoring SystemOizom
Low-cost Continuous Ambient Air Quality Monitoring System (CAAQMS) is compact, lightweight and cost-effective. It provides real-time high precision environment data, with geospatial and ubiquitous monitoring. Low-cost air quality sensors provide 360-degree ambient air monitoring for public awareness. The data can assist in encouraging community participation for air quality monitoring. It is the future of air monitoring in India.
Air Pollution Monitoring in India using Aeroqual Compact Air Quality Monitori...Carl Beck
Learn how a compact air quality monitoring system is being used to monitor ambient air pollution in India. The sensor-based air monitoring station delivers Near Reference air quality data at a third of the cost of traditional reference monitoring stations.
PlantConnect is a web based online monitoring and control tool from Ascent Informatics (India) Pvt. Ltd. It has capability of M2M communication for connecting with multiple devices across geographies and collect live device data. This data can be used for further analytics, reporting and online remote monitoring.
PlantConnect is one of the most advanced IIoT Platforms. It has various products specific to needs, such as Remote Asset Monitoring System (PlantConnect RAMS), PlantConnect SFactory for Real Time Manufacturing Data recording, and analytics, and PlantConnect Insights a Historian, Data Management & Reporting Solution.
Techport is an end-to end latest solutions provider for remote monitoring applications.We offer the most comprehensive set of chemical and equipment solutions and services available, helping our customers manage and optimize their water resources and process challenges across industries and municipalities.
NGMesh is a methane emissions monitoring system which provides 24/7 monitoring, on-site surveys, report preparation and data storage. GAZPOD uses the INSPECTRA LASER technology to monitor emission activity 24/7 and provide on-site survey capability. The data collected from GAZPOD and on site personnel’s mobile device via the NGMesh app is automatically transferred securely to the web software, eliminating the need for paper records manual data transcribing and transfer. Automated notifications and alerts are sent to designated personnel via app when leaks occur over a certain threshold.
Software for Oil, Gas & Marine Sector by LabsolsSapon Naskar
We have various applications for oil/fuel/lubricant/ocm labs - www.i-ocm.com . This includes:
1. OCM LIMS – Lab Information Management System for OCM industry
2. FQMS – Fuel Quality Monitoring System
3. STARS – Sample Tracking & Reporting System
4. FOBAS - Fuel Oil Bunkering Analysis and Advisory Service System
5. BQS – Bunker Quantity Survey System
6. SPC Analysis (Statistical Process Control ) for Quality Control
7. Testing results for customers offered on Mobile & Smart Phone
8. Customer Facing Portal for lab customers (Integrated with LIMS)
Broad range of report and dashboard applications such as KPI reports, Energy Ratings using ABC charting, Energy Use Allocation, Energy by Threshold Limits, Optimization of energy bookings, Energy Consumption Forecasting, Green House Gases reports, CO2 emission calculations, Examination of quality features, Statements of efficiency of the application of renewable energy sources, etc.
www.konsys-international.com
www.twitter.com/avreporter
Real Time Water Quality Monitoring and Alert Systems, Applications using OPEX...RekaNext Capital
In complex engineering business, it is useful to consider a OPEX model rather than a CAPEX model. This is to protect the customer from complex technology risks, changing technologies. Customer pays for successful delivery of services rather than buying equipment.
Pump Monitoring Systems powered by remote IoT Monitoring solutions help track pump performance parameters in terms of temperature, vibrations, voltage fluctuations and more. It helps to take predictive decisions for improved maintenance.
Pump Monitoring Systems powered by remote IoT Monitoring solutions help track pump performance parameters in terms of temperature, vibrations, voltage fluctuations and more. It helps to take predictive decisions for improved maintenance. http://bit.ly/2YFOoFV
Pump Monitoring Systems powered by remote IoT Monitoring solutions help track pump performance parameters in terms of temperature, vibrations, voltage fluctuations and more. It helps to make predictive decisions for improved maintenance.
ROLE OF DIGITAL SIMULATION IN CONFIGURING NETWORK PARAMETERSDeepak Shankar
Selecting the right Ethernet standard and configuring all the network devices in the embedded systems accurately is an extremely hard and rigorous job. The configuration depends on the topology, workloads of the connected devices, processing overhead at the switches, and the external interfaces. Network calculus, mathematical models and analytical techniques provide worst case execution time (WCET), but their probability of activity is extremely wide. This leads to overdesign which leads to higher costs, power consumption, weight, and size. Simulating the network is the best way to measure the throughput of the entire system. Digital system simulation provides better latency and throughput accuracy, but the accuracy is still limited because it does not consider the latency associated with the network OS, cybersecurity processing and scheduling. In many cases, these factors can reduce the throughput by 20-40%.
In this paper, we will present our research on modeling the entire Ethernet network, including the workloads, network flow control, scheduling, switch hardware, and software. To substantially increase the coverage and compare topologies, we have developed a set of benchmarks that provides coverage for different combination of deterministic, rate-constrained, and best effort traffic. During the presentation, we will cover the benchmarks, the list of attributes required to accurately model the traffic, nodes, switches, and the scheduler settings. We will also look at the statistics and reports required to make the configuration decision. In addition, we will discuss how the model must be constructed to study the impact of future requirements, failures, network intrusions, and security detection schemes.
Key Takeaways:
1. Learn how to efficiently use network simulation to design Ethernet systems
2. Develop a reusable benchmark and associated statistics to test different configurations
3. The role and impact of the CDT slots, guard band, send slope, idle slope, shuffle scheduling, flow control and virtual channels
PlantConnect RAMS - Give Voice to Your MachinesAkshay Tilak
PlantConnect is a web based monitoring and control platform from Ascent Informatics (India) Pvt. Ltd. PlantConnect RAMS is a solution designed specifically to cater requirements of Original Equipment Manufacturers. It aids remote monitoring of machines / devices deployed on field at end customer site from OEM HQ or maintenance room. This facilitates remote maintenance support or remote troubleshooting.
PlantConnect Insights Solution for DairiesAkshay Tilak
PlantConnect is a web based online monitoring and remorting tool from Ascent Informatics (India) Pvt. Ltd. A real time MIS solution specific for Dairy industry has been developed on this platform. It caters to various reporting needs of dairy industry and reports are available to all stake-holders. The system connects to various assets in a dairy like DCS, weigh-bridge, titration plant etc. and uses all this data for real time reporting.
3. Web based Environment Quality Monitoring System
for
Stack Emissions
Ambient Air Quality
Water Quality
ETP / STP output quality
EnviroConnect
Designed with Indian Central Pollution Control Board (CPCB) Guidelines
4. EnviroConnect Applications
• Stack Emissions and Ambient Air Quality
monitoring within Power Plants, Steel Plants,
Cement Plants etc.
• Water Quality monitoring in Effluent Treatment
Plants, Sewage Treatment Plants, etc.
• Process gas monitoring
• Nationwide network for Stack and Ambient Air
monitoring
• Sending air and water quality data to pollution
control boards
6. EnviroConnect Features
Data Acquisition
• Data acquisition from multiple Ambient Analyzers,
CEMS Analyzers, Flue Gas Analyzers, Water
analyzers, SPM Analyzers, Dust Monitors Flow
meters, Weather Stations etc. at single or multiple
locations
• All data collected on EnviroConnect web server
• Accessible to clients from anywhere, anytime
(24x7)
• Clients use a standard browser on PC / tablet / cell
phone
7. Connectivity
Device drivers available for gas analyzers, SPM analyzers, dust
monitors from following companies and the list is growing –
• Forbes Marshall CODEL
• Thermo fisher
• Siemens
• Teledyne API
• Met One
• PCME
• Eco Physics
• Horiba
• Recordum (airpointer)
• Standard drivers like Modbus, GSI available
• Others developed on request
8. Visualization
• Hierarchical tree view of all
sites at a glance
• System and device level
dashboards with customized
widgets
• Real-time data trends and
values
• Real time display on digital
display boards
9. Historical Data
• Historical data – average, min, max
• Historical trend
• Choose from 5 / 10 / 30 / 60 minutes and daily
averages
• Data export to excel (.csv), html, pdf formats
• Data flagging for
– Total range
– Measurement range
– Permissible range
– % validity
– Calibration and maintenance
10. Alarm definition
• Define alarms for instantaneous values of
CEMS crossing permissible range. These
can be defined per industry as per
individual limits set by PCB
• Ambient data alarms according to National
Ambient Air Quality Standards, e.g. PM10
– 24 hr avg. should not exceed 100 µg/m3
• Define alarms for water quality parameters
on approved permissible ranges
Alarm generation
• When any thresholds are crossed, alarms
are generated
• Audio-visual display on browser
• Alerts by SMS / email
Alarm Management
11. • Facility to request for data correction in case of any
abnormal data values
• Workflow for regulator to review and accept / reject
data correction with time stamping
Data Correction / Time Stamping
12. • Remote calibration of analyzers from server
• UI to configure complete calibration sequence
• Possibility to schedule calibration sequence at a set
time
• On demand calibration
Remote Calibration
Will work only if analyzer supports remote calibration
13. Reports
• Standard reports
– Station Report – daily / weekly / monthly
– Multi-station Report
– Parameter Comparison Report
– Abnormal Data Report
– Calibration Report
– Data correction Report
• Robust reporting engine for development of custom
reports
• Automatic report scheduling and delivery by email / print
• Can publish reports on company website
14. Charts
• Various charts for data analysis
– Wind rose
– Poll rose
– Histogram
– Trend
• Any other custom charts can be
developed
15. Configuration
• Extensive configuration tool to configure
sites, devices, parameters, users in minutes
• Remote configurable DAS
• General public can view data using a
browser
• User authentication and authorization for
device control and system configuration
• Secure and long term data storage on
server
User Access &
Data Security
16. PlantConnect® Components
• Software Components
– EnviroConnect Server
• A single web server with static IP address to monitor and control
multiple sites
– Data Acquisition Server (DAS)
• On site to acquire data from analyzers.
• Alternatively analyzers can directly send data to
EnviroConnect Server
– Browser based client – PC, tablet, mobile
• Hardware Components
– Server – customer owned or hosted by AIPL
– DAS hardware – AIPL supplied or customer supplied
– IO modules, if required for data acquisition directly
from sensors
18. Case Studies List
Brief summary of each case study is given here. For details visit
http://www.plantconnect.net/index.php/case-studies/plantconnect-air-
quality-monitoring-system-casestudy.html
1. Local installation – Ambient Air Quality
2. Local installation – CEMS
3. Local installation – Water Quality Monitoring
4. Nationwide server in CPCB for Forbes Marshal
CODEL
5. MPCB Server
6. ETS Servers
19. Case I : Local installation – Ambient
• Installations for Ambient Air Quality Monitoring for
Thermo Fisher analyzers
• Data acquisition from Thermo i series, FH62 series
analyzers, Met One analyzers and Dynalab AWS
• Data viewing at Local station as well as industry level
central station
• Data sent to MPCB / CPCB
• Remote calibration of analyzers
20. • Local installation for CEMS in
over 100 industries for Forbes
Marshall CODEL analyzers
• Data acquisition from CODEL
DCEM and GCEM
• Local viewing and reporting
• Data sent to MPCB Server
• Interface with ETS Bridge
Software
Case II : Local installation - CEMS
21. • Local installation for Water Quality Monitoring for Forbes
Marshall water analyzers
• Data acquisition from FM water analyzers
• Local viewing and reporting
• Data sent to CPCB,GPCB Server and more
Case III : Local installation – Water
22. Case IV : CPCB Server for FM
• EnviroConnect EQMS server installed in
CPCB on behalf of Forbes Marshal
CODEL
• Real time CEMS and ETP data collection
from various plants throughout the country
• Same system accessed by industries and
regulators
23. Case V : MPCB Server
• EnviroConnect EQMS server setup in
Maharashtra Pollution Control Board
• Currently data from more than 100+
CEMS and Ambient stations in various
industries in Maharashtra collected
• Aim is to bring all CEMS and Ambient
stations online and make validated data
available to general public
24. Case VI : ETS Server
• Emission Trading Scheme (ETS) is a path breaking project by MoEF
and CPCB. For details visit
http://www.cpcb.nic.in/upload/NewItems/NewItem_202_CEMS_Spec
s_v21-11-13v_cpcb.pdf
• First time in the world emission trading will be done using continuous
monitoring for Particulate Matter emissions from stationary sources
• Pilot is underway in Maharashtra and Gujarat with a customized
version of PlantConnect Server
• AIPL has also created ETS Bridge Software that is used for data
collection.
25. Customers / Partners
EnviroConnect EQMS is sold through our Partners who are
Analyzer Manufacturers / Distributors or System Integrators
Installations in more than 50 industries across India
27. AIPL
Ascent Informatics (AIPL) is a thought leader in
convergence of IT and Industrial Automation
AIPL has served customers across globe for more than
15 years creating several products in industrial
automation domain covering the entire lifecycle form
concept to completion and further maintenance and
support. The applications include remote monitoring,
data logging, plug n play instrumentation platforms etc.
28. Thank You!
Reach us to know more
Ascent Informatics (India) Pvt. Ltd.
Dr. Arvind Tilak,
CEO
arvind.tilak@aiplindia.com
Phone: +91 20 65004608
www.plantconnect.net /
www.ascentautomation.com
Follow us on