Original images and editing of them
•Download as PPTX, PDF•
0 likes•103 views
This document summarizes edits made to images for a magazine cover. The original long shot image was replaced with a mid-shot that captures half the subject's body and hides her face, creating mystery. Tools like the quick selection tool and rubber tool were used to remove the background and give the edited image a clean cut, professional look for the final draft cover. The mid-shot was chosen because it provides continuity between the film trailer, magazine, and poster.
Report
Share
Report
Share
Recommended
Production: manipulation of original photography
The document discusses the manipulation of several original photographs for use in a magazine. The photographs were edited by [1] adjusting colors, brightness, contrast and cropping to make subjects stand out; [2] cutting out backgrounds around subjects using selection tools; and [3] using smudge tools to blend colors and remove unwanted elements like grass. The goal of the edits was to make the photographs more dramatic, professional-looking and well-sized for the intended magazine layouts.
Image editing 2 done
The document summarizes the steps taken to prepare images for inclusion in a magazine. It describes editing background images to make them less bright and visible. It then details editing a main image by removing its background using the magic wand and eraser tools to create a transparent effect. Finally, it discusses editing additional images for a double page spread by adjusting brightness, contrast, hue, and saturation and adding a noise effect to one image. The end goal is to produce final images suitable for placement in the magazine layout.
Construction diary front cover
This document summarizes the process of designing the front cover of a construction diary. The designer selected an image of a model that had a plain background. They edited the image in Photoshop to adjust tones and colors and remove blemishes. The image was then cut out and placed on the cover page. Straplines were added along the top and side, and the logo, insert, and coverlines of text were positioned throughout the cover. Care was taken to balance the layout and ensure the main elements stood out clearly.
Photoshop
The document describes the process of editing an image in Photoshop for use on a billboard poster. First, the image was opened in Photoshop and the contrast, brightness, and background were edited. Then the image was cropped to the needed size and dragged onto a colored box on another Photoshop page before applying to confirm it stayed in the box. The steps were captured via screenshots to explain the process step-by-step for creating the final billboard design.
Wedding Picture Editing Process
The document describes steps taken to recreate the look of an original photograph in Photoshop. Effects like brightness and contrast, diffuse glow, and curves were applied to match the darkness, shadows, and glow of the original. Areas of the recreated photo were then rubbed out using the rubber tool to reveal rays of light from the underlying original photo. Additional effects like Gaussian blur and lens blur were added to further enhance the glow, and the recreated photo was placed underneath and rotated to mirror the original photo.
Norboyz skill portfolio
The document discusses using Photoshop tools to edit images for a school project. It describes using the magic wand tool to remove backgrounds, applying black and white filters, cropping images, copying and pasting text, and linking layers to move elements together. The steps outlined provide instructions for preparing and manipulating various elements to composite into a final design.
The dg pack inside
The document describes the process of designing the inside of a music CD package. Two pictures were selected and edited to complement the mood and theme of the package. The first picture of the band was darkened to match the tone. The second picture featured the main characters and was cropped, lightened, and adjusted in contrast and lighting before being converted to black and white to recreate the dreamlike feel from the music video.
Final Draft Double Page Spread Powerpoint
The document summarizes changes made to a double page magazine spread. The key changes include:
1) Replacing the main image and removing a turquoise color scheme. Additional images of the new model were also added.
2) Increasing the font size of the artist's name to span both pages.
3) Creating a mirrored copy of the main image on the right page with added grey-scale to keep the text visible.
4) Updating additional images and the background color to be consistent with changes made to the front cover.
Recommended
Production: manipulation of original photography
The document discusses the manipulation of several original photographs for use in a magazine. The photographs were edited by [1] adjusting colors, brightness, contrast and cropping to make subjects stand out; [2] cutting out backgrounds around subjects using selection tools; and [3] using smudge tools to blend colors and remove unwanted elements like grass. The goal of the edits was to make the photographs more dramatic, professional-looking and well-sized for the intended magazine layouts.
Image editing 2 done
The document summarizes the steps taken to prepare images for inclusion in a magazine. It describes editing background images to make them less bright and visible. It then details editing a main image by removing its background using the magic wand and eraser tools to create a transparent effect. Finally, it discusses editing additional images for a double page spread by adjusting brightness, contrast, hue, and saturation and adding a noise effect to one image. The end goal is to produce final images suitable for placement in the magazine layout.
Construction diary front cover
This document summarizes the process of designing the front cover of a construction diary. The designer selected an image of a model that had a plain background. They edited the image in Photoshop to adjust tones and colors and remove blemishes. The image was then cut out and placed on the cover page. Straplines were added along the top and side, and the logo, insert, and coverlines of text were positioned throughout the cover. Care was taken to balance the layout and ensure the main elements stood out clearly.
Photoshop
The document describes the process of editing an image in Photoshop for use on a billboard poster. First, the image was opened in Photoshop and the contrast, brightness, and background were edited. Then the image was cropped to the needed size and dragged onto a colored box on another Photoshop page before applying to confirm it stayed in the box. The steps were captured via screenshots to explain the process step-by-step for creating the final billboard design.
Wedding Picture Editing Process
The document describes steps taken to recreate the look of an original photograph in Photoshop. Effects like brightness and contrast, diffuse glow, and curves were applied to match the darkness, shadows, and glow of the original. Areas of the recreated photo were then rubbed out using the rubber tool to reveal rays of light from the underlying original photo. Additional effects like Gaussian blur and lens blur were added to further enhance the glow, and the recreated photo was placed underneath and rotated to mirror the original photo.
Norboyz skill portfolio
The document discusses using Photoshop tools to edit images for a school project. It describes using the magic wand tool to remove backgrounds, applying black and white filters, cropping images, copying and pasting text, and linking layers to move elements together. The steps outlined provide instructions for preparing and manipulating various elements to composite into a final design.
The dg pack inside
The document describes the process of designing the inside of a music CD package. Two pictures were selected and edited to complement the mood and theme of the package. The first picture of the band was darkened to match the tone. The second picture featured the main characters and was cropped, lightened, and adjusted in contrast and lighting before being converted to black and white to recreate the dreamlike feel from the music video.
Final Draft Double Page Spread Powerpoint
The document summarizes changes made to a double page magazine spread. The key changes include:
1) Replacing the main image and removing a turquoise color scheme. Additional images of the new model were also added.
2) Increasing the font size of the artist's name to span both pages.
3) Creating a mirrored copy of the main image on the right page with added grey-scale to keep the text visible.
4) Updating additional images and the background color to be consistent with changes made to the front cover.
3. fmp production experiments (1)
This document describes an experiment creating a poster for the anime Naruto. The student selected a background image of a field and sky that fit the anime theme. Naruto and other characters were found online and placed on the background using selection tools to remove backgrounds. Naruto was centered as the main character. Grass was added and resized at the bottom. The recognizable Naruto logo was placed at the bottom in orange, blue and black colors. Tools like selection, transformation and magic wand were used. The student is pleased with how the background and characters fit together and reflect the anime style. Most elements will be included in the final poster, including character placement and logo.
Double page spread analysis 2
The double page spread in the magazine uses bright neon lights and strobe light images to create a retro, club-like atmosphere that matches the magazine's focus on dance music. Two large images advertise dance music shows while smaller pictures and bold subheadings highlight specific articles about popular artists like Deadmau5. The layout organizes the content into sections and uses colors and images to visually engage and guide readers through the spread.
Final Draft Contents Page Breakdown
I took several photos for the contents page of a magazine, including close-ups of a female and a shot of two females at a swimming pool. I edited the brightness, color, and cropping of the images and placed them on the contents page along with a masthead. I also changed colors of headers, titles, and borders to red, grey, black and white to create a consistent color scheme and recognizable magazine style.
Experiments evidence template
This document summarizes Ryan Goldsmith's experimental photography project. It explores techniques like using out-of-focus imagery, capturing movement through long exposures, using reflections, and creating photomontages. For out-of-focus photos, the camera was manually focused to blur the images. Capturing movement involved long shutter speeds of 2-3.5 seconds to either freeze or blur moving subjects. Reflection photos utilized reflective surfaces like phone screens. Photomontages were made by taking overlapping photos and merging them in Photoshop. The document analyzes the effects achieved and evaluates which techniques and photos were most successful.
Front Cover Final Draft Breakdown
The document describes changes made to a magazine cover design. The designer updated the main image to feature a model with edgier hairstyle and makeup. They changed the font and color scheme to be more eye-catching, experimenting with different reds before settling on a dark red. Additional edits included altering the brightness and colors of the main image in Photoshop and updating fonts and layout elements to improve consistency and make the cover stand out.
Editing images
This document discusses editing various images of a musician named Jonny. It describes taking original photos of Jonny playing guitar or looking out at sea, then cropping the images to focus on Jonny and remove backgrounds. The images were also edited by adjusting brightness, contrast, colors, adding filters like sepia or blurring backgrounds to emphasize Jonny and experiment with different artistic effects for potential album covers.
Project 2 Review: Graphic Design
The document provides instructions for designing a poster to raise awareness for an organization called Helping Hand Saigon. It describes using various graphic design tools to add images, text, and colors to create a simple yet impactful poster with a sepia-toned image of a child as the focal point, a slogan with a distressed text effect, and contact information in small type. The goal is to convey a message of helping impoverished children through visuals and balanced hierarchical composition.
Portrait Shoot PowerPoint
1. The document outlines various edits made to images for a magazine portrait shoot. Edits include adjusting brightness, contrast, exposure, selective color, cropping, adding effects like film grain, and removing backgrounds.
2. Specific edits are described, such as using match color to enhance luminance, rubber tool to remove backgrounds, destaturate effect to make images black and white, and placing cutouts over backgrounds.
3. Additional edits involve adjusting vibrance, selective color, brightness, contrast, exposure, hue, saturation, color balance, and adding shapes with multiply effect to create see-through looks. Final images were selected for the front cover, contents page, and double page spreads.
A2 Media Studies Storyboard Development
The document describes the second version of a storyboard for a media studies project. It includes scenes of a couple meeting, being in a relationship, arguing, and breaking up, with the argument added to increase intensity and interest over the first version. Pictures were also used to replace some of the hand-drawn images from the first storyboard in order to more intuitively show scenery and demonstrate characters' internal feelings.
College edits- slide1
The document discusses editing a photograph in Photoshop. It describes desaturating the photo and then using the history brush tool to add color back to the subject. It also discusses applying different filters like poster edges and sumi-e and adjusting settings like brightness, contrast, and exposure. The writer experimented with changing background colors and liked how purple looked versus the original green. Overall, the document covers different editing techniques applied to photographs to change their style and appearance.
College edits- slide
The document describes the steps taken to edit a photograph of Beth with a guitar using Photoshop tools and filters. Key steps include:
1) Using the Magnetic Lasso tool to isolate Beth and add a black background;
2) Adding layers and the Brush tool to change the background to black;
3) Using the Pen tool to make the photograph into a spiral shape;
4) Adding an outer glow effect in pink to the spiral layer.
Production - Production Experiments
The document describes three photo editing experiments using tools in Photoshop. In the first experiment, the author used the blur tool to blur out surrounding trees and focus attention on bears in the photo. In the second experiment, tools like the dodge tool, sharpen tool and blur tool were used to make a photo of a lion and cat look brighter, more sketchy and comical. In the third experiment, the dodge tool was used to brighten a photo of birds and the blur tool was used to slightly blur surrounding grass and bushes to focus on the birds.
Shahnaz media photo presentation
This document discusses photos taken for a magazine photoshoot. The first three photos are rejected for various reasons - poor lighting, distracting background, face not clearly visible. A fourth photo has hair covering the model's face. The fifth photo is considered better as the model's expression is clear without hair in the way. This fifth photo would be cropped and straightened for use in the magazine.
Bizcocho de zumo_de_naranja
Este documento proporciona una receta para un bizcocho de zumo de naranja que incluye huevos, azúcar, aceite, harina, levadurina y ralladura de naranja. Las instrucciones indican batir bien los huevos con el zumo de naranja y los demás ingredientes húmedos antes de añadir la harina y la levadurina y mezclarlo todo. Luego, se hornea el bizcocho a 180°C durante aproximadamente 50 minutos.
Boletim165
1) O texto discute as perguntas feitas a Deus em momentos de angústia, comparando a pergunta de Habacuque ("Até quando, Senhor?") com as perguntas feitas hoje.
2) Apresenta cinco atitudes a se ter diante das crises da vida: não acreditar na apatia de Deus, confiar no tempo de Deus, orar por avivamento espiritual.
3) Conclui que devemos buscar a Deus em oração e avivamento, como fez o profeta Habacuque.
MVEB: A serva de Naamã
A serva de Naamã, uma menina hebraica capturada e levada para a Síria, demonstrou grande fé em Deus ao servir bem seu senhor Naamã, oferecendo seu trabalho como ao Senhor. Quando Naamã adoeceu de lepra, a serva testemunhou sobre o poder de Deus para curar, levando Naamã a procurar o profeta Eliseu e ser curado. Apesar das dificuldades, a serva foi um instrumento eficaz para revelar a Deus de Israel e levar Naamã à fé.
Torrijas
Este documento proporciona una receta para torrijas que incluye pan de barra, huevos, leche, azúcar, limón, miel y aceite. La receta instruye cortar el pan en rodajas, calentar la leche con azúcar y cáscara de limón, batir los huevos y mojar el pan en la leche y los huevos antes de freírlo y luego cubrirlo con miel.
Peter blum licensing error messages
The document discusses error messages that may occur when licensing Peter Blum software. The first error indicates that no license file was found in the specified folder. The second error means that no license key was defined in the global.asax file. The third line shows how to define the license key in code.
ಅಲ್ಲಾಹನೊಂದಿಗೆ ಸಹಭಾಗಿಯಾಗಿ ಮಾಡಬೇಕೆಂದು ನಿನ್ನ ಮೇಲೆ ಒತ್ತಡ ಹಾಕಿದರೆ ಅವರ ಮಾತನ್ನು ಕೇಳಬೇಡ
ಅಲ್ಲಾಹನೊಂದಿಗೆ ಸಹಭಾಗಿಯಾಗಿ ಮಾಡಬೇಕೆಂದು ನಿನ್ನ ಮೇಲೆ ಒತ್ತಡ ಹಾಕಿದರೆ ಅವರ ಮಾತನ್ನು ಕೇಳಬೇಡ
More Related Content
What's hot
3. fmp production experiments (1)
This document describes an experiment creating a poster for the anime Naruto. The student selected a background image of a field and sky that fit the anime theme. Naruto and other characters were found online and placed on the background using selection tools to remove backgrounds. Naruto was centered as the main character. Grass was added and resized at the bottom. The recognizable Naruto logo was placed at the bottom in orange, blue and black colors. Tools like selection, transformation and magic wand were used. The student is pleased with how the background and characters fit together and reflect the anime style. Most elements will be included in the final poster, including character placement and logo.
Double page spread analysis 2
The double page spread in the magazine uses bright neon lights and strobe light images to create a retro, club-like atmosphere that matches the magazine's focus on dance music. Two large images advertise dance music shows while smaller pictures and bold subheadings highlight specific articles about popular artists like Deadmau5. The layout organizes the content into sections and uses colors and images to visually engage and guide readers through the spread.
Final Draft Contents Page Breakdown
I took several photos for the contents page of a magazine, including close-ups of a female and a shot of two females at a swimming pool. I edited the brightness, color, and cropping of the images and placed them on the contents page along with a masthead. I also changed colors of headers, titles, and borders to red, grey, black and white to create a consistent color scheme and recognizable magazine style.
Experiments evidence template
This document summarizes Ryan Goldsmith's experimental photography project. It explores techniques like using out-of-focus imagery, capturing movement through long exposures, using reflections, and creating photomontages. For out-of-focus photos, the camera was manually focused to blur the images. Capturing movement involved long shutter speeds of 2-3.5 seconds to either freeze or blur moving subjects. Reflection photos utilized reflective surfaces like phone screens. Photomontages were made by taking overlapping photos and merging them in Photoshop. The document analyzes the effects achieved and evaluates which techniques and photos were most successful.
Front Cover Final Draft Breakdown
The document describes changes made to a magazine cover design. The designer updated the main image to feature a model with edgier hairstyle and makeup. They changed the font and color scheme to be more eye-catching, experimenting with different reds before settling on a dark red. Additional edits included altering the brightness and colors of the main image in Photoshop and updating fonts and layout elements to improve consistency and make the cover stand out.
Editing images
This document discusses editing various images of a musician named Jonny. It describes taking original photos of Jonny playing guitar or looking out at sea, then cropping the images to focus on Jonny and remove backgrounds. The images were also edited by adjusting brightness, contrast, colors, adding filters like sepia or blurring backgrounds to emphasize Jonny and experiment with different artistic effects for potential album covers.
Project 2 Review: Graphic Design
The document provides instructions for designing a poster to raise awareness for an organization called Helping Hand Saigon. It describes using various graphic design tools to add images, text, and colors to create a simple yet impactful poster with a sepia-toned image of a child as the focal point, a slogan with a distressed text effect, and contact information in small type. The goal is to convey a message of helping impoverished children through visuals and balanced hierarchical composition.
Portrait Shoot PowerPoint
1. The document outlines various edits made to images for a magazine portrait shoot. Edits include adjusting brightness, contrast, exposure, selective color, cropping, adding effects like film grain, and removing backgrounds.
2. Specific edits are described, such as using match color to enhance luminance, rubber tool to remove backgrounds, destaturate effect to make images black and white, and placing cutouts over backgrounds.
3. Additional edits involve adjusting vibrance, selective color, brightness, contrast, exposure, hue, saturation, color balance, and adding shapes with multiply effect to create see-through looks. Final images were selected for the front cover, contents page, and double page spreads.
A2 Media Studies Storyboard Development
The document describes the second version of a storyboard for a media studies project. It includes scenes of a couple meeting, being in a relationship, arguing, and breaking up, with the argument added to increase intensity and interest over the first version. Pictures were also used to replace some of the hand-drawn images from the first storyboard in order to more intuitively show scenery and demonstrate characters' internal feelings.
College edits- slide1
The document discusses editing a photograph in Photoshop. It describes desaturating the photo and then using the history brush tool to add color back to the subject. It also discusses applying different filters like poster edges and sumi-e and adjusting settings like brightness, contrast, and exposure. The writer experimented with changing background colors and liked how purple looked versus the original green. Overall, the document covers different editing techniques applied to photographs to change their style and appearance.
College edits- slide
The document describes the steps taken to edit a photograph of Beth with a guitar using Photoshop tools and filters. Key steps include:
1) Using the Magnetic Lasso tool to isolate Beth and add a black background;
2) Adding layers and the Brush tool to change the background to black;
3) Using the Pen tool to make the photograph into a spiral shape;
4) Adding an outer glow effect in pink to the spiral layer.
Production - Production Experiments
The document describes three photo editing experiments using tools in Photoshop. In the first experiment, the author used the blur tool to blur out surrounding trees and focus attention on bears in the photo. In the second experiment, tools like the dodge tool, sharpen tool and blur tool were used to make a photo of a lion and cat look brighter, more sketchy and comical. In the third experiment, the dodge tool was used to brighten a photo of birds and the blur tool was used to slightly blur surrounding grass and bushes to focus on the birds.
Shahnaz media photo presentation
This document discusses photos taken for a magazine photoshoot. The first three photos are rejected for various reasons - poor lighting, distracting background, face not clearly visible. A fourth photo has hair covering the model's face. The fifth photo is considered better as the model's expression is clear without hair in the way. This fifth photo would be cropped and straightened for use in the magazine.
What's hot (13)
Viewers also liked
Bizcocho de zumo_de_naranja
Este documento proporciona una receta para un bizcocho de zumo de naranja que incluye huevos, azúcar, aceite, harina, levadurina y ralladura de naranja. Las instrucciones indican batir bien los huevos con el zumo de naranja y los demás ingredientes húmedos antes de añadir la harina y la levadurina y mezclarlo todo. Luego, se hornea el bizcocho a 180°C durante aproximadamente 50 minutos.
Boletim165
1) O texto discute as perguntas feitas a Deus em momentos de angústia, comparando a pergunta de Habacuque ("Até quando, Senhor?") com as perguntas feitas hoje.
2) Apresenta cinco atitudes a se ter diante das crises da vida: não acreditar na apatia de Deus, confiar no tempo de Deus, orar por avivamento espiritual.
3) Conclui que devemos buscar a Deus em oração e avivamento, como fez o profeta Habacuque.
MVEB: A serva de Naamã
A serva de Naamã, uma menina hebraica capturada e levada para a Síria, demonstrou grande fé em Deus ao servir bem seu senhor Naamã, oferecendo seu trabalho como ao Senhor. Quando Naamã adoeceu de lepra, a serva testemunhou sobre o poder de Deus para curar, levando Naamã a procurar o profeta Eliseu e ser curado. Apesar das dificuldades, a serva foi um instrumento eficaz para revelar a Deus de Israel e levar Naamã à fé.
Torrijas
Este documento proporciona una receta para torrijas que incluye pan de barra, huevos, leche, azúcar, limón, miel y aceite. La receta instruye cortar el pan en rodajas, calentar la leche con azúcar y cáscara de limón, batir los huevos y mojar el pan en la leche y los huevos antes de freírlo y luego cubrirlo con miel.
Peter blum licensing error messages
The document discusses error messages that may occur when licensing Peter Blum software. The first error indicates that no license file was found in the specified folder. The second error means that no license key was defined in the global.asax file. The third line shows how to define the license key in code.
ಅಲ್ಲಾಹನೊಂದಿಗೆ ಸಹಭಾಗಿಯಾಗಿ ಮಾಡಬೇಕೆಂದು ನಿನ್ನ ಮೇಲೆ ಒತ್ತಡ ಹಾಕಿದರೆ ಅವರ ಮಾತನ್ನು ಕೇಳಬೇಡ
ಅಲ್ಲಾಹನೊಂದಿಗೆ ಸಹಭಾಗಿಯಾಗಿ ಮಾಡಬೇಕೆಂದು ನಿನ್ನ ಮೇಲೆ ಒತ್ತಡ ಹಾಕಿದರೆ ಅವರ ಮಾತನ್ನು ಕೇಳಬೇಡ
Protocolo 27 y28 mar
El documento proporciona el protocolo para dos días que incluye los nombres de las personas asignadas para las mañanas y tardes de cada día así como los coordinadores.
Happy Holidays Worksheet
This document is a worksheet from ReadingKingdom.com to help children learn the words "toy" and "toys" through two activities. The first activity, called "Savvy Sounds", has the child identify words that contain the full words "toy" or "toys". The second activity, called "Spot 'n Sort", has the child cross out words in each row that do not contain "toy" or "toys" and identify the words that do contain them. The goal is to help children learn and practice identifying the words "toy" and "toys".
Bildungsprogramm GPA-djp Salzburg - Frühjahr 2016
Bildungsangebot für BetriebsrätInnnen der GPA-djp Salzburg für das 1. Halbjahr 2016; zwei Basiskurse 1 mit 2 Modulen
F acebook:twitter
This document discusses two social media platforms, Twitter and Facebook. Twitter allows users to update their status, share videos and pictures instantly, follow others, and tweet. Facebook connects users to their social network and allows them to connect with friends and family and share videos and pictures instantly.
£1m
The video discusses how to play the game of chess. It explains that the objective is to checkmate the opponent's king by placing it under direct attack where it cannot escape. Basic rules are described, such as how each piece moves and takes pieces by replacing them on their square. Strategies are presented like controlling the center of the board and developing pieces early in the game.
Pyramex Asia Mceps Ballistic Eyewear
Pyramex Asia provides an extensive range of safety eyewear. Email us for more information at info@pyramexasia.com
In Extremo
Meine Präsentation im Fach Musik über In Extremo und die Authentizität zur mittelalterlichen Musik
Viewers also liked (20)
ಅಲ್ಲಾಹನೊಂದಿಗೆ ಸಹಭಾಗಿಯಾಗಿ ಮಾಡಬೇಕೆಂದು ನಿನ್ನ ಮೇಲೆ ಒತ್ತಡ ಹಾಕಿದರೆ ಅವರ ಮಾತನ್ನು ಕೇಳಬೇಡ
ಅಲ್ಲಾಹನೊಂದಿಗೆ ಸಹಭಾಗಿಯಾಗಿ ಮಾಡಬೇಕೆಂದು ನಿನ್ನ ಮೇಲೆ ಒತ್ತಡ ಹಾಕಿದರೆ ಅವರ ಮಾತನ್ನು ಕೇಳಬೇಡ
Similar to Original images and editing of them
Image manipulation magazine-travel
The document describes the steps taken to manipulate an image for use on a travel magazine cover. First, the subject was isolated using the quick selection tool to remove him from the original background. Effects like inner shadow were added to the subject's layer to add depth. Then, the subject was placed into a new image and positioned behind another person for depth of field. A shadow was added under the subject's feet using the burn tool to make him appear part of the new scene. The final manipulated image with the subject integrated into the new background was deemed suitable for the magazine cover.
Evaluation
The document summarizes the media products created by the author and Danny Jenno for their media assignment. They created a trailer for the film "Disconnected", as well as a poster and magazine cover promoting the film. The trailer is about a young girl who is looked after by her sister, but sometimes seems disconnected from reality. The author discusses the shots used in the trailer and how they developed conventions from real trailers. Feedback from audiences helped them improve the trailer. A variety of media technologies were used at different stages of creating the products.
Production
The document discusses manipulations made to original photography for use in a magazine. [1] The front cover image was edited to enhance colors and contrast to make it more dramatic, and cropped to eliminate empty space. [2] A contents page image was lightened and had contrast adjusted to make shadows fainter and make colors and the model stand out more, and was shrunk proportionally. [3] For double page spreads, the background was cut out around the model using selection tools, and contrast, brightness and exposure were adjusted to make the photos more dramatic.
Media Photoshop
The document discusses various tools used in photo editing software:
1) The selection tool was used to move layers and resize text and images.
2) The magnetic lasso tool helped outline a model from the background automatically.
3) The text tool allowed adding and formatting text by choosing fonts, size, and color.
4) The rubber stamp tool copied pixels from one photo area to another, such as removing background around hair.
Media Photoshop
The document discusses various tools used in photo editing software:
1) The selection tool was used to move layers and resize text and images.
2) The magnetic lasso tool helped outline a model from the background automatically.
3) The text tool allowed adding text to layers and formatting fonts and size.
4) The rubber stamp tool copied pixels from one photo area to another, such as removing background around hair.
5) Blur and sharpen tools were used to blur the background and sharpen the model for contrast.
6) The paint bucket tool filled areas with specific colors like those in a logo.
Media Photoshop
The document discusses various tools used in photo editing software:
1) The selection tool was used to move layers and resize text and images.
2) The magnetic lasso tool helped outline a model from the background automatically.
3) The text tool allowed adding text to a new layer and formatting fonts and size.
4) The rubber stamp tool copied pixels from one photo area to another, such as removing background around hair.
5) Blur and sharpen tools were used to blur the background and sharpen the model for contrast.
6) The paint bucket tool filled areas with specific colors like those in a logo.
Question one
This document discusses photos that were taken and edited for use in a music magazine. It begins by showing unedited photos of a shoe and nail polish that are too dark, contain shadows or cut-off content. The document then displays edited versions where brightness was increased and subjects were extracted from backgrounds using Photoshop tools, resulting in cleaner, clearer, more professional-looking images. Several photos of models were also taken and one was selected for having clear lighting that draws in the audience. In summarizing the edits, the document explains that brightness was adjusted and magic extraction was used to remove backgrounds, creating a lighter, cleaner front cover presentation.
Question one
This document discusses photos that were taken and edited for use in a music magazine. It begins by showing unedited photos of a shoe and nail polish that are too dark, contain shadows or cut-off content. The document then displays edited versions where the photos were made brighter, shadows were removed, and subjects were extracted from backgrounds using Photoshop tools. This created cleaner, more professional-looking images for the magazine's front cover and interior pages. In all, different editing techniques like adjusting light and saturation, plus using the magic extraction tool, helped refine initial photos into polished selections suitable for the magazine's intended audience and conventions.
Question one
This document discusses unedited and edited photos used in a music magazine. The unedited photos have issues like dark shadows, unclear focus, and distracting backgrounds. The document then shows how Photoshop was used to edit the photos by making them brighter, adjusting saturation, and extracting subjects from their backgrounds. This created cleaner, clearer, and more professional photos suitable for the magazine's front cover and content.
Step by step construction of front cover
Gursimran Kaur describes the step-by-step process of constructing the front cover of a document. First, she opens a blank canvas and edits the main image using selection and feather tools to give it a professional look. She then erases unwanted edges and background areas. Finally, she adds the masthead, headline in a large font, and colored sell lines around the image according to her color scheme.
Answer to question 6 (evaluation)
In producing a media project, the author learned how to take high quality photos and edit them using Adobe Photoshop, which was new to them. Their biggest strength was editing images to look professional for the finished product, such as cutting out backgrounds, smoothing edges with effects, and using luminosity to give black and white contrast. While shooting, they chose a graffiti setting for the front cover to fit the magazine genre. The main skill developed was confidence using Photoshop, and image editing was their biggest strength, while the magic wand tool and rough cut edges presented limitations.
Poster Design
This document describes the process of designing three posters for a found footage horror film called "Occult". For each poster design, the artist chose an image from the film shoot, adjusted colors and lighting in Photoshop to give a horror film feel, and added elements like static, motion blur, and cuts/smeared makeup on the character to match horror film poster conventions. The titles were placed in the camera screen area to look like the "REC" symbol was replaced. Minor adjustments were made to finalize each poster design.
FMP Experiment
The document describes Amy Watson's process for an animation experiment involving character movement and vocals. It discusses each step of the process, including:
- Creating an animatic to plan the scenario
- Animating by filming frames of a character with plastic eyes being pushed down
- Uploading the frames from a video camera to a laptop
- Editing the frames in Sketchbook to remove extra parts like hands
- Recording vocal audio from a friend
- Assembling the frames in Dragonframe and adjusting timing to match vocals
- Editing and combining elements in iMovie by adjusting speed and audio alignment
The reflection indicates Amy will include the editing, animatic, and Dragonframe assembly processes as well as
6. production reflection real1
Jack Henderson summarizes his film production process. He began by creating a shot list to plan out his project. During filming, he had to change his idea from a short film to a horror movie intro due to lacking enough content. In editing, he experimented with effects like warp stabilizer to add an unnatural feel. He also incorporated some stock footage and royalty-free music and audio clips. Overall, the planning process helped manage his time and the experimentation with effects during editing helped create atmosphere and tension for the horror genre.
3. FMP Production Experiments
The document describes experiments conducted in Photoshop to create a movie poster for Saw 2. Photographs were taken of the actor Jigsaw and a creepy doll using professional lighting and cameras in the college photography room. Various Photoshop tools like the exposure panel, blur tool, and levels were used to manipulate the images and add text elements. Test shots were taken of the author dressed as a nun to potentially include in posters, but the lighting was deemed too bright and dark, respectively. The experiments helped learn which Photoshop tools were most effective and how to properly use the lighting equipment.
Evaluation 1
1) The document evaluates the media product and ancillary tasks by analyzing screenshots from the film and discussing how they develop conventions or provide subtle hints.
2) New media technologies like a video camera, Adobe Premiere Pro, and Photoshop were used to construct, research, plan, and evaluate the project.
3) Audience feedback helped improve the film editing and sound, but identified weaknesses in the poster font and lack of cohesion in the film review. The producer learned how to better incorporate feedback.
2 presentation yeaaaaa
The document provides commentary on editing photos in Adobe Photoshop CS5. Across multiple photos, the editor used the magic wand tool to cut out backgrounds. Common effects included changing the blend mode to "color burn" or "vivid light" to give photos an aged look, and adding a small stroke around images to help them stand out on textured backgrounds. Additional touches were adding dirt or small product images within the photos. The goal was to create a cohesive set of photos with an Egyptian or antique style.
Experimental photography task 2
The document discusses different experimental photography techniques including capturing movement, reflections, out of focus images, and photomontages. For movement photos, a slower shutter speed is recommended to capture motion rather than freezing it. Reflection shots can capture unique perspectives by finding reflective surfaces like windows or puddles. Creating out of focus images requires switching to manual focus and using a wider aperture. Photomontages involve taking many close-up photos of a scene and combining them, either manually or using Photoshop, to form a larger image. Post-production techniques like filters, blurring, and color adjustments can further enhance the experimental aspects of these images.
Screen shots
The document provides instructions for editing images and laying out text for a music magazine page in Photoshop and InDesign, including how to cut out and manipulate photos, add gradients and effects to images, insert barcodes and QR codes, and format text into columns using tools like the polygon lasso, clone stamp, and drop cap tools to achieve a professional magazine style layout.
Magazine anaylisis almost done
This document summarizes the development process of a magazine cover focused on the film "The Watched." Key steps included researching conventions from other film magazines, selecting an appropriate image, using Photoshop tools like the Magic Wand and Burn tools to edit the image, adding text elements like the title and details, and making revisions based on feedback to improve the design.
Similar to Original images and editing of them (20)
More from ruwaydah13
Original images
This document discusses and compares three potential images for a film poster. The first image is rejected because the subject's arms would be cut off and the attention is drawn to her hoodie. The second image is also rejected because the subject's head is too low and her arms would again be cut off. The third and chosen image is said to fit well on the poster with none of the arms cut off and allowing the audience to see more of the subject's face while maintaining mystery.
Image planning
The document outlines an image planning for a film poster including location, costume, framing, and mise-en-scene. The location will either be in a house or school to cut out the background. The model will wear a black hoodie to connote mystery and continuity with the film trailer. The image will be a mid-shot at eye level to make the audience feel they relate to the subject and encourage them to watch the trailer. The image will be centered against a black and grey background to match the dark, tense atmosphere of the trailer and imply the subject hides in darkness from danger.
Film poster portrayal
The document discusses the elements that make an effective film poster, using the Dark Knight poster as an example. It analyzes the colors, images, and layout conventions used in that poster. The dark colors of black, blue, and orange create a mysterious and dangerous tone that matches the character of Batman. Images are typically placed in the center to draw the eye. By following these same conventions for colors, text placement, and overall design, the author aims to create a poster that similarly attracts audiences and makes them want to learn more about the film.
Questionnaire
The document is a questionnaire about film preferences. It asks respondents about their gender, age, preferred film genres, best days to watch films, preferred actors, elements they like in action films, how often they watch films, if actors or trailers influence their decisions to watch films, and how long trailers should be. The results show action and horror are most popular genres, most watch films daily or weekly, and trailers between 2 and 4 minutes are preferred.
Film trailer brief
Our aim is to create a film trailer that matches our chosen genre and gives a sense of the narrative. We must ensure it reaches the codes and conventions of the genre and looks professional like a real film trailer. Creating the trailer will be difficult and time consuming as it requires considering elements like actors, filming, editing, and sound. We have planned our filming schedule to take place over weekends and half terms to complete it.
G324 questionnaire
According to a questionnaire, action films were the most preferred genre with 4 votes, followed by horror with 3 votes, and sci-fi and romance each received 2 votes, while thriller got 1 vote. When asked what color refers to action, red and orange each received 4 votes, yellow got 2 votes, and black received 2 votes.
Film poster annotations (2)
This poster summarizes the film Hot Fuzz through several elements:
- A two-shot image of the main actors Simon Pegg and Nick Frost dominates the poster to attract audiences' eyes and signal Pegg as the leading role.
- Black is the main color, adding mystery and suggesting a story. Ambient lighting on the actors' serious expressions hints at their roles as police officers in an exaggerated comedy.
- The slogan "Big Cops, Small Town, Moderate Violence" promises action, adventure, and humor that would appeal especially to British audiences.
- Names of the recognizable actors are placed above the title, using their star power to draw audiences, according to Dyer
More from ruwaydah13 (9)
Recently uploaded
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Recently uploaded (20)
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Original images and editing of them
- 1. Original Images. First draft cover: Final draft cover: This image is a long shot, this gets her whole This image is a mid shot it only captures half of body and establishes her location. It is eye level her body and also her face is hidden this creates so we can her whole body clearly. mystery, the shot is also eye level. I have chosen this image as my final one because it show continuity between my film trailer and magazine and poster.
- 2. Excluding elements. Final Front cover image: The second tool I used was the rubber tool, This is the original image for the final draft The first tool I used to cut out the this was to make the image look like it had a front cover before it was edited, I plan to background was the quick selection tool, clean cut and didn’t look messy, this gave it remove the background. this helps cut out big part of the image some professionalism. quickly.