The document summarizes different types of ocean energy resources including wave, tidal, ocean thermal, and salinity gradient energy. It notes that the theoretical global resource of ocean energy is 8,000-80,000 TWh/yr for wave energy, 800 TWh/yr for tidal current energy, 2,000 TWh/yr for salinity gradient energy, and 10,000 TWh/yr for ocean thermal energy, which exceeds current world electricity consumption of 17,000 TWh/yr. It also provides examples of different ocean energy extraction technologies that have been implemented or tested, such as oscillating water columns, attenuators, overtopping devices, and tidal barriers and currents, with the largest wave and tidal installations
Tidal energy is produced by the surge of ocean waters during the rise and fall of tides. Tidal energy is a renewable source of energy.
During the 20th century, engineers developed ways to use tidal movement to generate electricity in areas where there is a significant tidal range—the difference in area between high tide and low tide. All methods use special generators to convert tidal energy into electricity.
Tidal energy production is still in its infancy. The amount of power produced so far has been small. There are very few commercial-sized tidal power plants operating in the world. The first was located in La Rance, France. The largest facility is the Sihwa Lake Tidal Power Station in South Korea. The United States has no tidal plants and only a few sites where tidal energy could be produced at a reasonable price. China, France, England, Canada, and Russia have much more potential to use this type of energy.
In the United States, there are legal concerns about underwater land ownership and environmental impact. Investors are not enthusiastic about tidal energy because there is not a strong guarantee that it will make money or benefit consumers. Engineers are working to improve the technology of tidal energy generators to increase the amount of energy they produce, to decrease their impact on the environment, and to find a way to earn a profit for energy companies.
Tidal Energy Generators
There are currently three different ways to get tidal energy: tidal streams, barrages, and tidal lagoons.
For most tidal energy generators, turbines are placed in tidal streams. A tidal stream is a fast-flowing body of water created by tides. A turbine is a machine that takes energy from a flow of fluid. That fluid can be air (wind) or liquid (water). Because water is much more dense than air, tidal energy is more powerful than wind energy. Unlike wind, tides are predictable and stable. Where tidal generators are used, they produce a steady, reliable stream of electricity.
Placing turbines in tidal streams is complex, because the machines are large and disrupt the tide they are trying to harness. The environmental impact could be severe, depending on the size of the turbine and the site of the tidal stream. Turbines are most effective in shallow water. This produces more energy and allows ships to navigate around the turbines. A tidal generator's turbine blades also turn slowly, which helps marine life avoid getting caught in the system.
The world's first tidal power station was constructed in 2007 at Strangford Lough in Northern Ireland. The turbines are placed in a narrow strait between the Strangford Lough inlet and the Irish Sea. The tide can move at 4 meters (13 feet) per second across the strait.
Barrage
Another type of tidal energy generator uses a large dam called a barrage. With a barrage, water can spill over the top or through turbines in the dam because the dam is low. Barrages can be constructed across tidal rivers, bays, and estuaries.
Tidal Energy the most common topic in science section and one of the most interesting topic . This slides contains the information how does actually tidal energy in generated and what are the advantages and disadvantages of tidal energy . Wave power design and how it works . This topic is mostly used as a project in schools and colleges in science section in higher schools
Energy generated by using wind, tides, solar, geothermal heat, and biomass including farm and animal waste is known as non-conventional energy. All these sources are renewable or inexhaustible and do not cause environmental pollution. More over they do not require heavy expenditure.
Natural resources that can be replaced and reused by nature are termed renewable. Natural resources that cannot be replaced are termed nonrenewable.
Renewable resources are replaced through natural processes at a rate that is equal to or greater than the rate at which they are used, and depletion is usually not a worry.
Nonrenewable resources are exhaustible and are extracted faster than the rate at which they formed. E.g. Fossil Fuels (coal, oil, natural gas).
Tidal energy is produced by the surge of ocean waters during the rise and fall of tides. Tidal energy is a renewable source of energy.
During the 20th century, engineers developed ways to use tidal movement to generate electricity in areas where there is a significant tidal range—the difference in area between high tide and low tide. All methods use special generators to convert tidal energy into electricity.
Tidal energy production is still in its infancy. The amount of power produced so far has been small. There are very few commercial-sized tidal power plants operating in the world. The first was located in La Rance, France. The largest facility is the Sihwa Lake Tidal Power Station in South Korea. The United States has no tidal plants and only a few sites where tidal energy could be produced at a reasonable price. China, France, England, Canada, and Russia have much more potential to use this type of energy.
In the United States, there are legal concerns about underwater land ownership and environmental impact. Investors are not enthusiastic about tidal energy because there is not a strong guarantee that it will make money or benefit consumers. Engineers are working to improve the technology of tidal energy generators to increase the amount of energy they produce, to decrease their impact on the environment, and to find a way to earn a profit for energy companies.
Tidal Energy Generators
There are currently three different ways to get tidal energy: tidal streams, barrages, and tidal lagoons.
For most tidal energy generators, turbines are placed in tidal streams. A tidal stream is a fast-flowing body of water created by tides. A turbine is a machine that takes energy from a flow of fluid. That fluid can be air (wind) or liquid (water). Because water is much more dense than air, tidal energy is more powerful than wind energy. Unlike wind, tides are predictable and stable. Where tidal generators are used, they produce a steady, reliable stream of electricity.
Placing turbines in tidal streams is complex, because the machines are large and disrupt the tide they are trying to harness. The environmental impact could be severe, depending on the size of the turbine and the site of the tidal stream. Turbines are most effective in shallow water. This produces more energy and allows ships to navigate around the turbines. A tidal generator's turbine blades also turn slowly, which helps marine life avoid getting caught in the system.
The world's first tidal power station was constructed in 2007 at Strangford Lough in Northern Ireland. The turbines are placed in a narrow strait between the Strangford Lough inlet and the Irish Sea. The tide can move at 4 meters (13 feet) per second across the strait.
Barrage
Another type of tidal energy generator uses a large dam called a barrage. With a barrage, water can spill over the top or through turbines in the dam because the dam is low. Barrages can be constructed across tidal rivers, bays, and estuaries.
Tidal Energy the most common topic in science section and one of the most interesting topic . This slides contains the information how does actually tidal energy in generated and what are the advantages and disadvantages of tidal energy . Wave power design and how it works . This topic is mostly used as a project in schools and colleges in science section in higher schools
Energy generated by using wind, tides, solar, geothermal heat, and biomass including farm and animal waste is known as non-conventional energy. All these sources are renewable or inexhaustible and do not cause environmental pollution. More over they do not require heavy expenditure.
Natural resources that can be replaced and reused by nature are termed renewable. Natural resources that cannot be replaced are termed nonrenewable.
Renewable resources are replaced through natural processes at a rate that is equal to or greater than the rate at which they are used, and depletion is usually not a worry.
Nonrenewable resources are exhaustible and are extracted faster than the rate at which they formed. E.g. Fossil Fuels (coal, oil, natural gas).
This report discusses the potential contribution that energy derived from the tides and waves can make to overall energy supply in a sustainable way. It covers the topics of wide range like how tides and waves are formed; functions of the possible and popular power generation systems especially tidal barrages,turbines, oscillating water columns and wave farms. Advantages and disadvantages of tidal and wave energy are also briefly discussed. Some cost data’s used give us brief insight into the economic prospects of the tidal and wave energy. By turning to potential along the Indian coastline, we found that India do have a huge potential of tidal and wave energy, though it has started very late. Government
initiatives and extensive research focused on the mentioned relevant opportunities will surely change the energy scenario.
Principle
OTEC
methods (open cycle & close cycle) energy from tides
components of tidal power plants
Operation
methods of utilization of tidal energy
Storage
ocean waves
wave energy conversion devices
Tidal power or tidal energy is a form of hydropower that converts the energy obtained from tides into useful forms of power, mainly electricity.
Although not yet widely used, tidal energy has potential for future electricity generation. Tides are more predictable than the wind and the sun. Among sources of renewable energy, tidal energy has traditionally suffered from relatively high cost and limited availability of sites with sufficiently high tidal ranges or flow velocities, thus constricting its total availability. However, many recent[when? clarification needed] technological developments and improvements, both in design (e.g. dynamic tidal power, tidal lagoons) and turbine technology (e.g. new axial turbines, cross flow turbines), indicate that the total availability of tidal power may be much higher than previously assumed, and that economic and environmental costs may be brought down to competitive levels.
Historically, tide mills have been used both in Europe and on the Atlantic coast of North America. The incoming water was contained in large storage ponds, and as the tide went out, it turned waterwheels that used the mechanical power it produced to mill grain. The earliest occurrences date from the Middle Ages, or even from Roman times. The process of using falling water and spinning turbines to create electricity was introduced in the U.S. and Europe in the 19th century.
The world's first large-scale tidal power plant was the Rance Tidal Power Station in France, which became operational in 1966. It was the largest tidal power station in terms of output until Sihwa Lake Tidal Power Station opened in South Korea in August 2011. The Sihwa station uses sea wall defense barriers complete with 10 turbines generating 254 MW.
Ocean wave machine is rotated by wave energy. Wave machine drives the generator rotor, pump to store the water at high level, compressor to store the air in compressed air storage plant. Here it is presented the different method to harness wave energy.
General objective
discuss the various ocean energy sources
interpret the energy transformation in wave energy conversion
discuss the working of various type wave energy plant
Specific objectives
define the wave energy
write benefits and application of wave energy system
explain the types of wave energy plant
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
This report discusses the potential contribution that energy derived from the tides and waves can make to overall energy supply in a sustainable way. It covers the topics of wide range like how tides and waves are formed; functions of the possible and popular power generation systems especially tidal barrages,turbines, oscillating water columns and wave farms. Advantages and disadvantages of tidal and wave energy are also briefly discussed. Some cost data’s used give us brief insight into the economic prospects of the tidal and wave energy. By turning to potential along the Indian coastline, we found that India do have a huge potential of tidal and wave energy, though it has started very late. Government
initiatives and extensive research focused on the mentioned relevant opportunities will surely change the energy scenario.
Principle
OTEC
methods (open cycle & close cycle) energy from tides
components of tidal power plants
Operation
methods of utilization of tidal energy
Storage
ocean waves
wave energy conversion devices
Tidal power or tidal energy is a form of hydropower that converts the energy obtained from tides into useful forms of power, mainly electricity.
Although not yet widely used, tidal energy has potential for future electricity generation. Tides are more predictable than the wind and the sun. Among sources of renewable energy, tidal energy has traditionally suffered from relatively high cost and limited availability of sites with sufficiently high tidal ranges or flow velocities, thus constricting its total availability. However, many recent[when? clarification needed] technological developments and improvements, both in design (e.g. dynamic tidal power, tidal lagoons) and turbine technology (e.g. new axial turbines, cross flow turbines), indicate that the total availability of tidal power may be much higher than previously assumed, and that economic and environmental costs may be brought down to competitive levels.
Historically, tide mills have been used both in Europe and on the Atlantic coast of North America. The incoming water was contained in large storage ponds, and as the tide went out, it turned waterwheels that used the mechanical power it produced to mill grain. The earliest occurrences date from the Middle Ages, or even from Roman times. The process of using falling water and spinning turbines to create electricity was introduced in the U.S. and Europe in the 19th century.
The world's first large-scale tidal power plant was the Rance Tidal Power Station in France, which became operational in 1966. It was the largest tidal power station in terms of output until Sihwa Lake Tidal Power Station opened in South Korea in August 2011. The Sihwa station uses sea wall defense barriers complete with 10 turbines generating 254 MW.
Ocean wave machine is rotated by wave energy. Wave machine drives the generator rotor, pump to store the water at high level, compressor to store the air in compressed air storage plant. Here it is presented the different method to harness wave energy.
General objective
discuss the various ocean energy sources
interpret the energy transformation in wave energy conversion
discuss the working of various type wave energy plant
Specific objectives
define the wave energy
write benefits and application of wave energy system
explain the types of wave energy plant
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
2. Overview of Ocean Energy
-ocean energy is replenished by the sun and through tidal influences of the
moon’s and sun’s gravitational forces
-near-surface winds induce wave action and cause wind-blown currents at
about 3% of the wind speed
-tides cause strong currents into and out of coastal basins and rivers
-ocean surface heating by some 70% of the incoming sunlight adds to the
surface water thermal energy, causing expansion and flow
-wind energy is stronger over the ocean due to less drag, although
technically, only seabreezes are from ocean energy
3. How much energy and what types?
-250 Billion barrels of oil worth of energy coming into ocean every day
-80 million barrels of oil per day produced
kinetic
potential
4. -250 Billion barrels of oil worth of energy coming into ocean every day
-80 million barrels of oil per day produced
How much energy and what types?
Theoretical global resource of ocean energy:
8,000-80,000 TWh/yr for wave energy
800 TWh/yr for tidal current energy
2,000 TWh/yr for salinity gradient energy
10,000 TWh/yr for ocean thermal energy
World’s electricity consumption 17,000 TWh/yr
9. Power From Ocean Waves
• Wave energy is strongest on the west coasts and increases toward the poles.
• At approx. 30 kW/mcl in the Northwest (yearly avg.), a single meter (3.3 feet) of wave has the
raw energy to power about 23 homes.
12. Ocean Power Technology buoy, to best tested this month off Oregon
will power 50 homes. Federal permit obtained for grid-connection.
capacity = 150 kW
13. Oscillating Water Column Installations: LAND
NOTE: Plant Bowen (Georgia Power) operates at 3,200,000 kW
24. Ocean Energy: Where are we today?
Wave Energy (grid-connected):
-0.4MW and 0.5MW OWC off the coast of Pico and Islay by 2008
-2.25MW Pelamis off Portugal by 2008
-0.5MW section of Wave Star Energy off Denmark by 2009
-7MW Wave Dragon off Wales by 2010
Tidal:
- barriers: 240MW France in 1966 and 20MW in Canada
-Current: 1.2MW off Ireland by 2009, 1MW France
Thermal:
-0.2MW Hawaii 1993-1998
EPRI surveyed, collected information and assessed existing wave energy conversion devices. Sixteen worldwide manufacturers were queried of which 12 provided information of which eight devices passed the initial screening consisting of two factors
Is the device likely to be ready for demonstration in the late 2006 time period?
Has the device manufacturer provided sufficient information to prove the survivability in storm conditions?
The eight devices which passed the initial screen can be grouped into one of four generic types as shown above
AquaEnergy floating point absorber
Ocean Power Delivery Pelamis floating attenuator – the most technologically mature of the devices. A full scale prototype achieved the milestone last summer of being the first offshore wave device to transmit power to an electrical grid
Wave Dragon floating overtopping ramp terminator
Energetech bottom mounted oscillating water column terminator