Master Counter Remote Control Copier can be used to copy each factory brand's remote control swiftly; including fix code, computer code, and part of roll code. Its function has remote control regenerate and frequency check and so on. Equip three remote control (Including size A, B, C). It is easy to operate according to the introduction in using manual.
1. Newly Master Counter Re mote Control Copie r
Master Counter Remote Control Copier can be used to copy each factory
brand's remote control swiftly; including fix code, computer code,
and part of roll code. Its function has remote control regenerate and
frequency check and so on. Equip three remote control (Including size
A, B, C). It is easy to operate according to the introduction in
using manual.
Language: English/ Chinese
Digital Counter Remote Master Upgrade Version
10th generation new upgrade version of remote copy machines
2. Language: English/ Chinese
The upgrade remote master with below powerful functions:
1. Copy fixed code for all garage and cars(submachine A used);
2. Copy partial computer code(submachine B used);
3. Copy orginal cars rolling code(submachine C used);
4. Bilingual edition:transfer between English and Chinese freely;
5. Frequency test range:100MHz--1000MHz;
6. Remote controller refresh feature.
Fully compatible with:
Support 72 of brand remote control system such as Iron General, PLC,Toyota,
Honda, GM, BMW etc.
Fixed code, long code, flash code, rolling code, invisible, deformation yards,
4. 12. HT6014
13. MC145026
14. HT640
15. EV1527
16. 527
17. PT2260
Digital Counter Remote Master Features
1. Dual CPU (MCU) multiple threads simultaneously, frequency, waveform,
internal code once generated, easy to use.
2. One-touch copy, copy key by key, duplicate copy and so on many kinds of
operation way, each key is easy to follow and easy to get started
3·
Powerful, compact, multi-machine in one of the set of radio frequency
meter, signal scanner, the signal strength meter, internal code analyzer,
internal code generator, etc..
5. Digital Counter Remote Master Description:
Remote master user manualThe remote master used to copy RC,working wit
h remote control A,B,C 3styles submachines.The use method as belows.
1. 4 copy styles as below
Turn on the power,press key5 2 times,interface shows "remot copy";
1).press key5 1 time,shows "1.normal copy";
2).then press key3 1 time,shows "2.Singkey copy";
3).continue to press key3 1 time,shows "3.MulFreq copy";
4).repeat last step,shows "4.same SYS copy";
2."normal copy"
6. When the interface shows"1.normal copy",then action as below
1).press key5 1 time,shows "input 1key to",then press the original remote 1ke
y 1 time,the machine sounds "bee" a time,enter into code reading;then press
key5 1 time,shows "input 2key to",continue last step.Action as this to read all
keys one by one;
2).When finished original remote code reading,press key5 2times,shows "inpu
t No.1 remote",means insert RC(remote control)A,press key5 1 time,then write
the code infomation into new remote;
3).adjust frequency:back to interface"remot copy",press key4 1time to test fre
quency:put the original remote on the machine and press any key 1time,show
s the frequency.Then put the RC A on the machine,press key1 one time,use t
he noninductive regulator action on the white capacitance to adjust frequency fit.
4).after adjust frequency,press key1 & key 2 at the same time(if the remote ha
s 5keys,just need press key5 one time),the light flash 1time.When you press a
ny key there is the light,means copy successfully finished.
3.other copy method,pls action as the indication in the machine.
Packing List:
1pc x Digital Counter
2pc x Red Wires
1pc x Screw Stick
1pc x AC Adapter
http://www.obdii.co.uk/car-key-programmer-c-15_8/newly-mastercounter-remote-control-copier