1. With opel Global tis global diagnostic system
2. Support offline lease function
3. Support for Opel offline programming function
4. With GDS2 diagnostic system
5. Tech2win diagnostic software support adding latest software
6. support programming online
7. support cable communication
8. support wireless communication
9. support original factory latest software
10. With European for Chevrolet Global tis, Supports European for Chevrolet offline programming
11. All Chip are new and original
Cataloge ge 3.control and_automation_dienhathe.com-4_15_vat300_e_c6-1_rev_dDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
CPU224XP Ethernet borad
CPU224XP Digital 14input 10output/CPU226XP Digital 24input 16output
Analog 2 channel input/1 channel output
DC24V 1A
2 channel PPI port(support Modbus)
Comes with a perpetual calendar, which can be maintained for 2 years after power failure
PPI communication interface supports 187.5K, supports Modbus protocol
Up to 7 modules can be connected
Automatic saving of power-down data
Software supports all instructions in Siemens v4.0 Step 7
Cataloge ge 3.control and_automation_dienhathe.com-4_15_vat300_e_c6-1_rev_dDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
CPU224XP Ethernet borad
CPU224XP Digital 14input 10output/CPU226XP Digital 24input 16output
Analog 2 channel input/1 channel output
DC24V 1A
2 channel PPI port(support Modbus)
Comes with a perpetual calendar, which can be maintained for 2 years after power failure
PPI communication interface supports 187.5K, supports Modbus protocol
Up to 7 modules can be connected
Automatic saving of power-down data
Software supports all instructions in Siemens v4.0 Step 7
Cataloge ge 3.control and_automation_dienhathe.com-4_14_vat300_e_c5-8_rev_bDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Amtech offers Solution Provide Active Harmonic Solution
with Afortable cost, Fast Fourier transform based harmonic compensation, Operates with closed loop control, Reactive power compensation, optimum
utilization of power capacity and reduction in kVA demand.
Electronic multi measuring instruments super-s series dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Cataloge ge 3.control and_automation_dienhathe.com-4_16_vat300_e_c6-6-1_rev_aDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
How to use MST-12000 Universal Automotive Test Platform And ECU Signal Simula...BuyobdtoolShop
MST-12000 Universal Automotive Test Platform And ECU Signal Simulation
http://www.buyobdtool.com/wholesale/mst-12000-automotive-test-platform.html
MST-12000 Instrument application:
1. Automobile sensor dynamic diagnosis, automobile engine, transmission, ABS, air conditioning, anti theft and other computer repair, auto teaching AIDS model driven, automobile production development;
2. The utility model is suitable for Germany, the United States, Japan, South Korea, and other domestic mini models etc hundreds of models
SPEED CONTROL OF INDUCTION MACHINE WITH REDUCTION IN TORQUE RIPPLE USING ROBU...IAEME Publication
In this paper a novel and simple algorithm for three-phase induction motor(IM) under Direct Torque Control (DTC) scheme using Classic DTC switching table for dynamic torque ripple reduction and space-vector modulation scheme for steady state torque and flux control is proposed. The proposed scheme having the advantages of low torque ripples as well as constant switching frequency.
Simulation results are given to prove the ability of the proposed method obtaining good speed control bandwidth while overcoming classic DTC and DTC-SVM drawbacks.
Cataloge ge 3.control and_automation_dienhathe.com-4_14_vat300_e_c5-8_rev_bDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Amtech offers Solution Provide Active Harmonic Solution
with Afortable cost, Fast Fourier transform based harmonic compensation, Operates with closed loop control, Reactive power compensation, optimum
utilization of power capacity and reduction in kVA demand.
Electronic multi measuring instruments super-s series dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Cataloge ge 3.control and_automation_dienhathe.com-4_16_vat300_e_c6-6-1_rev_aDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
How to use MST-12000 Universal Automotive Test Platform And ECU Signal Simula...BuyobdtoolShop
MST-12000 Universal Automotive Test Platform And ECU Signal Simulation
http://www.buyobdtool.com/wholesale/mst-12000-automotive-test-platform.html
MST-12000 Instrument application:
1. Automobile sensor dynamic diagnosis, automobile engine, transmission, ABS, air conditioning, anti theft and other computer repair, auto teaching AIDS model driven, automobile production development;
2. The utility model is suitable for Germany, the United States, Japan, South Korea, and other domestic mini models etc hundreds of models
SPEED CONTROL OF INDUCTION MACHINE WITH REDUCTION IN TORQUE RIPPLE USING ROBU...IAEME Publication
In this paper a novel and simple algorithm for three-phase induction motor(IM) under Direct Torque Control (DTC) scheme using Classic DTC switching table for dynamic torque ripple reduction and space-vector modulation scheme for steady state torque and flux control is proposed. The proposed scheme having the advantages of low torque ripples as well as constant switching frequency.
Simulation results are given to prove the ability of the proposed method obtaining good speed control bandwidth while overcoming classic DTC and DTC-SVM drawbacks.
Controlled power is a prerequisite of various sectors, including industries. The
implementation of microcontroller based firing angle control, using ATmega 32 MCU and
associated hardware circuitry is discussed here. Main emphasis is given on improved
performance of converter so as to achieve reliable and consistent power control. The power
control scheme uses commonly available components like ATmega-32 controller,
transistorized conditioning circuit, rectifier module, for firing angle control. The objective is
to achieve a reliable, affordable and accurate power control mechanism for the use of
industrial and household consumer applications, with superior performance.
- Perform speed control (rpm) of a DC motor.
- Use any arduino or stm32 microcontroller.
- Use any sensor you prefer
- Show the current rpm on an LCD or on a computer.
- Give a provision to enter the target rpm through pc using UART.
- Send us a video of the working, and a short report with a block diagram of hardware and software. Also give a brief description of the working principle.
Video Link: https://drive.google.com/open?id=1-l8Cz9ZcidYDWPRlA2p5f4dzsF9F0pKg
A Novel Direct Torque Control for Induction Machine Drive System with Low Tor...IAES-IJPEDS
The conventional Direct Torque Control (DTC) is known to produce a quick and robust response in AC drives. However, during steady state, stator flux and electromagnetic torque which results in incorrect speed estimations and acoustical noise. A modified Direct Torque Control (DTC) by using Space Vector Modulation (DTC-SVM) for induction machine is proposed in this paper. Using this control strategy, the ripples introduced in torque and flux are reduced. This paper presents a novel approach to design and implementation of a high perfromane torque control (DTC-SVM) of induction machine using Field Programmable gate array (FPGA). The performance of the proposed control scheme is evaluated through digital simulation using Matlab\Simulink and Xilinx System Generator. The simulation results are used to verify the effectiveness of the proposed control strategy.
Implementation of a digital multimeter using basic stamp2 on a professional development board. It also includes R2R ladder network for digital to analog conversion
Design and Implementation of Schmitt Trigger using Operational AmplifierIJERA Editor
A Schmitt trigger is an electronic circuit, a Comparator that is used to detect whether a voltage has crossed over a given reference level. It has two stable states and is very useful as signal conditioning device. When an input waveform in the form of sinusoidal waveform, triangular waveform, or any other periodic waveform is given, the Schmitt trigger will produce a Rectangular or square output waveform that has sharp leading and trailing edges. Such fast rise and fall times are desirable for all digital circuits. The state of the art presented in the paper is the design and implementation of Schmitt trigger using operational amplifier µA-741, generating a Rectangular waveform. Furthermore, the Schmitt trigger exhibiting hysteresis is also presented in the paper. Due to the phenomenon of hysteresis, the output transition from HIGH to LOW and LOW to HIGH will take place at various thresholds.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Similar to SKS-3058N Auto EECS and ECU For Examine-Analyzing Tester (20)
Original digimaster 3 digimaster iii odometer correction master with 980 tokensJack Chen
Digimaster 3 also is called Digimaster III with 980 Tokens or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc
V4.88 newest digiprog iii digiprog 3 odometer programmer with full softwareJack Chen
DigiProgIII is the worldwide leader in the production and marketing of digital speedo programming and correction software.
Digiprog III Programmer with Full SoftwareWith the use of the new DIGIPROG III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.
Ck 100 ck-100 key programmer ck100 auto key programmer v45.06 sbb the latest ...Jack Chen
It is a new generation of the SBB Key Programmer, the replace version.
Alternative function and feature of the SBB V33.02.
Supporting more 34 car brands and 164 models in immobilizer list than SBB.
Supporting more 16 car brands and 96 models in remote controls than SBB.
Excellent quality, OBDChina exclusive.
Newest Digiprog III Digiprog 3 Odometer Programmer with Full SoftwareJack Chen
DigiProgIII is the worldwide leader in the production and marketing of digital speedo programming and correction software.
Digiprog III Programmer with Full SoftwareWith the use of the new DIGIPROG III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.
Autocom cdp pro 2013.3 for cars & trucks 2 in 1 with bluetoothJack Chen
1. The Multi Auto-Diag VS08 CDP Pro database offers a deep OBD2 generic and manufacturer specific coverage of European Cars like MB, BMW, Audi, VW, Porsche, Volvo, SAAB, Jaguar, Land Rover etc, and very good coverage of Japanese and North American Cars.
2. For diagnostics in older pre-OBD2 cars, Multi Auto-Diag VS08 supplies specific OBD1 cables.
3. The CDP Pro database is translated to several languages.
4.Multi Auto-Diag VS08 uses Original Data from vehicle manufacturers to guarantee the best quality and functionality.
5. Wireless communication is included in all of Multi Auto-Diag VS08's diagnostic products.
6. The user can also add extra options such as repair information, service schedules and electrical diagrams from external suppliers, which can be connected to the program with ready to use links.
OBDLeader U-VCI Universal Vehicle Connection Interface Diagnostic Scanner Covers more than 50 makes, 1000 vehicle systems, it reliable USB connection ensures its stability in complex electromagnetism, and Uses most advanced 2.4GHz wireless communication technique. It is really a quick test function to diagnose entire vehicle. It supports English, Spanish, Russian, French four languages switch directly.
Autel MaxiDAS® DS708 is a state-of-art diagnostic system that delivers more accurate, more stable, more comprehensive, easier and faster diagnosis. The new generation platform stands out in a variety of tools by providing incredibly high performance with intuitive operation. Right for the first time, workshops and technicians could find an OE-level diagnostic solution designed for the aftermarket. The DS708 is the key to gain customer confidence and boost your bottom-line.
Launch x431 diagun iii global version newest scan tool 100% genuineJack Chen
X-431 Diagun III is a newly developed diagnostic computer with full color display screen. By communicating with the powerful DBScar diagnostic connector via Bluetooth or cable, X-431 Diagun III can test almost all the domestic cars and the imported ones from Asia, Europe and America. Meanwhile it features high quality test, upgrading fast any where at any time and synchronized with the newest international models. It’s more credible in quality and performance when compared with other products.
Digimaster 3 also is called Digimaster III with 980 Tokens or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc
Digiprog iii digiprog 3 odometer programmer with full softwareJack Chen
DigiProgIII is the worldwide leader in the production and marketing of digital speedo programming and correction software.
Digiprog III Programmer with Full SoftwareWith the use of the new DIGIPROG III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.
Range Rover MKIII - All Comms,MKIII All Comms
Used to Communicate Withthe Range Rover L322 Vehicle. (2003-2005)
Before Ordering Please check the Last 8 digits of your VIN.
Only MKIII Range Rover Vehicles up to 5A999999 Will Work.
If your VIN is below this number, then you are good to go.
Newly master counter remote control copierJack Chen
Master Counter Remote Control Copier can be used to copy each factory brand's remote control swiftly; including fix code, computer code, and part of roll code. Its function has remote control regenerate and frequency check and so on. Equip three remote control (Including size A, B, C). It is easy to operate according to the introduction in using manual.
Dearborn Protocol Adapter 5 for Trucks,Trailers,Buses and Light Commercial Ve...Jack Chen
Dearborn Protocol Adapter 5 is designed to help manufacturers diagnostic the fault of trucks, trailers, buses and light commercial vehicles.It covers multiple systems and widely used, it's user friendly.Dearborn Protocol Adapter 5 is an proferssinal tool for the maintenance of the commercial vehicle manufacturers.
SBB Key Programmer is a universal key programmer for programming multi-brands car keys, because its software with database contains the most important vehicle information. Compare to the former version which supports global cars, SBB key programmer V33.02 support new cars like Ford 2010 and Hummer.
1. Is fully compatible with all VW, Audi, Seat and Skoda models through the current model year, including models using a direct CAN connection for diagnostics.
2. Has a database of more than 14000 fault-codes and measuring-block texts.
3. Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.
4. Allows you to view, log, and graph 3 groups of Measuring Blocks at once.
5. Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS).
Multi auto diag vs08 cdp plus for cars & trucks 2 in 1 20131versionJack Chen
Multi Auto-Diag VS08 CDP+ pro is a diagnostic tool used with a PC or Pocket PC and Autocoms powerful CARS Diagnostic software, making it a powerful and flexible tool for all vehicle shops, fleet owners, vehicle testing, road service, police and armed forces.
Multi Auto-Diag VS08 CDP Plus is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old and new vehicles.
PP2000/LEXIA-3 Interface latest version, works for both Citreon and Peugeot!
Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered Quality
SKS-3058N Auto EECS and ECU For Examine-Analyzing Tester
1. SKS-3058N Auto EECS and ECU For Examine-Analyzing
General Introduction
SKS-3058N,the analyzer of ECS, is well-desiged for top auto repair
technicians.
It includes funtions of signal measurement, signal generatr, power
drive; display in both Chinese and English; simple interface, simple
operation, easy to carry.
The instrument can be widely used in the field of fault diagnosis of
automobile, automobile computer repair, automotive electronic control
system teaching and other related field of automotive electronics.
SKS-3058 Appearance
(Fig.1) the appearance 1
the appearance 2
(Fig.2)
Characteristics of the instrument
According to the diagnosis of auto site rules and actual demand, it
has the following new features.
2. 1.The unique characteristics of the pulse measurement and analysis
functions:
Except the functions of real-time fuel injection pulse width and
square wave frequency measurement, it increases function of the width
and speed synchronous display and waveform analysis, which has very
important practical value in the automobile field diagnosis,auto
computer repair, auto repair teaching etc.
(Fig.3)3ms/1200rpm
injection pulse waveform
(Fig. 4)3MS injection pulse width
measurement
(Fig.5) 980KHz square wave
(Fig.6) 980KHz analysis of interface of square wave
2.Real-time adjustable of the signal characteristic:
3. During the signal output time, the fine adjustment of amplitude,
frequency, phase, the number of teeth, missing teeth number and shape
index can be arbitrarily adjusted, which is greatly facilitates the
judgment of fault of automobile computer repair process.
(Fig. 7)sinusoidal coupling interface
(Fig. 8)the characteristics of the coupling signal
(Fig. 9)adjusted interface of suare wave
(Fig. 10)Characteristics of square wave signal
4. (Fig. 11) Sinusoidal missing teeth adjustment interface
(Fig. 12) The characteristics of sinusoidal missing tooth signal
(Fig.13)positive signalcharacteristic of square wave missing teeth
(Fig.14) Inverting signal characteristics of square wave missing
teeth
3.Signals multiple outputed:
The instrument is developed by adopting high performance
microprocessor. It can output seven signals, which is convenient for
the automobile repair technician to diagnosising and analysising the
difficult miscellaneous diseases of automotive electronic control
system;
5. (Fig.15)The signal multiplexed output 1
(Fig. 16) The signal multiplexed output 2
4.Multiple information display in the same interface:
In order to real-time analyze the faul automotive electronic control
system, the instrument is especially designed to display engine
current speed when it is testing fuel injection pulse width at the
same time; During the voltage analog output and oxygen signal
simulation output,at the same time in the same interface it display
current injection pulse width.
Using this function, technicians can master a variety of electronic
control system of automotive engine associated data information in
the first time.
6. (Fig.17)Multiple information display 1
(Fig.18) Multiple information display 2
(Fig.19)Multiple information display 3
(Fig.20)Multiple information display 4
5.Actuator comprehensive driving function:
The instrument can detect the injector, the automobile electronic
control ignition module, ignition coil, a pulse electromagnetic valve
actuators as well as other aducator when they are in different speed
conditions.
This function is convenient for technician judgment or execution the
device in the first time.
7. (Fig.21) the main menu of actuator drive
(Fig.22) Injector drive
(Fig.23)Pulse valve opening interface
(Fig.24) The actuator driving speed
6.The analog output voltage and voltage measurement function:
According to the circuit of the voltage sensor, the instrument can
analog output of 0 -- 5V DC voltage, and increase or decrease the
amplitude of 5mV, which can be conveniently diagnose the fault of
electronic control system associated with the voltage signal.
The instrument also has the function of voltage measurement, realtime detection of 0 - 25V DC voltage, data and Simulation of light
synchronous display.
This function is very helpful for the analysis of automobile charging
system fault.
8. (Fig.25)Voltage analog output interface
(Fig.26)Voltage measurement interface
7.The friendly man-machine interface:
Instrument adopts the most concise design idea, 128*64 liquid crystal
display interface, display in both Chinese and English, clear logic
of interface; panel show clear, the operation is convenient.
(Fig.27) Chinese main menu
(Fig.28) English main menu
(Fig.29) Operation input output jack
9. (Fig.30) key Operation schematic
8.The practicl wiring configuration:
According to the special demand of the automobile diagnosis field and
the automobile connector, combined the experience with making our
other product universal group of accumulated, the instrument is
equipped with various sensors common plug wire, can be very
convenient to connect with automotive electronic control systems,
which is easier for technician to work.
(Fig.31)instrument accessories
Function index
The instrument includes the function of signal measurement, signal
output, signal power drive together, covering the action mechanism of
various kinds of electronic signals of automotive electronic control
system; It provides great convenience for automotive technicians onsite diagnosis, automobile computer repair and repair of teacher
training.
1.Signal measurement
10. A.Fuel injection pulse width, the engine speed measurement
☆Digital display (00.00-99.99 ms)
☆Light synchronous simulation (0.0-25.0 MS)
☆Show the engine speed in the same interface(0-60000 rpm)
(Fig.32) 3ms/1200rpm injection pulse wavefo
(Fig.33) 3ms pulse width 1200rpm practical measurement
B.Positive pulse width, frequency, duty ratio measurement
☆positive pulse width (00.00-650.00 ms)
☆Frequency measurement (00.00-9999.0 Hz)
☆Duty ratio measurment(1-99%)
11. (Fig.34) 980KHz squar wave form
(Fig.35) 980KHz square wave Measurement number
C.Voltage measurement
☆Digital display (00.0-25.5 V)
☆Light synchronous simulation (0-25 V)
(Fig.36) Voltage measurement
(Fig.37) Voltage measurement interface selection interface
2.The signal output
A.Square wave signal
☆1---20KHz frequency stepless adjustment;
☆One end of the signal output to earth
☆The 5Vpp---9Vpp amplitude stepless adjustment
12. (Fig.38)Square wave adjusted interface
(Fig.39)Square wave Signal characteristics
B.X+Y missing tooth signal
☆1---2KHz frequency stepless adjustment;
☆The 5Vpp---18Vpp amplitude stepless adjustment;
☆1---60 signal output tooth number in real-time adjustment;
☆1---3 signal output of missing teeth real-time adjustment;
☆0 °, 180 ° phase signal output in real-time adjustment;
☆X+Y signal outpted by square wave to earth, sine to earth,
sinusoidal coupling in three ways, which is convenient for the
application of various crankshaft signal simulation;
☆During the signal output, sine wave and square wave characteristics
can real-time switch.
13. (Fig.40) The sinusoidal coupling interface
(Fig.41) The characteristics of the coupling signal
(Fig.42) Sinusoidal missing teeth adjustment interface
(Fig.43) The characteristics of sinusoidal missing tooth signal
(Fig.44) Square wave missing teeth adjustment interface (3+2)
(Fig.45) Square wave missing teeth signal characteristics
14. (Fig.46) Square wave missing teeth adjustment interface (RP)
(Fig.47) Square wave missing teeth
inverting signal missing tooth
C.Voltage signal
☆Voltage signal output (0-5000 mV 5mV)
☆Light synchronous simulation (0-5V)
☆The same interface injection pulse width measurement (00.00-99.99
MS
(Fig.48) Schematic voltage output measurement
(Fig.49) Voltage output 4ms pulse width measurement interface
15. D.Oxygen sensor signal
☆Mixed gas concentration (0.9V)
☆The mixture of dilute (0.1V)
☆The same interface injection pulse width measurement (00.00-99.99
MS)
(Fig.50) The oxygen signal selection
interface
(Fi
g.51) The mixture of dilute and 4ms pulse width measurement interface
E.Resistance signal (optional)
Precise multi-turn potentiometer pointer;
0---10K resistance of ten coil output, a minimum of 22 ohm;
(Fig.52) Resistance signal simulation accessories (optional)
16. It mainly used for the output signal of the sensor such as the
coolant temperature, intake air temperature, the ambient
temperature, which must be simulated by using the resistance
signal.
3.The driving test
A.The ignition pulse signal
☆Simulation speed (600-3000 r/m)
☆Drive pulse width 2ms (active for high level)
It can directly drive the COP, DIS amplifier module.
(Fig.53) The characteristics of ignition pulse
signal
ating interface of driving speed
(Fig.54)
Simul
B.Power drive signal
⑴duty ratio controller power drive
☆The frequency of the 400Hz signal
☆The driving current 10A
☆Duty cycle adjustment range 0-99% (± 1% ± 5% coarse and fine)
17. It can drive electronic solar term door, variable flow compressor
and EGR valve Etc,
⑵pulse width controller power drive
☆The driving current 10A
☆Simulation speed (600-3000 r/m)
☆The fuel injectors 3MS (active low)
☆Ignition coil 4ms (active low)
It can drive the fuel injectors, ignition coil, the carbon canister
solenoid valve.
(Fig.55) characteristics of negative pulse width to the injector
drive
(Fig.56) Drive opening interface of pulse valve
Using Introduction
1.Power supply
This machine is to use an external power supply, the instrument has
the right power jack, using a dedicated power line instrument with
(Annex 2) can be easily connected with the 12V storage battery; high
quality 12V/2A regulated power supply in the table can be used for
configuring instrument (Annex 7). When using other 220V/12V power
18. adapter, please pay attention to the current more than 1A, the
voltage shall not exceed 15V, power output plug and instrument
matching, polarity is negative.
Tips
Due to the use of an external power supply, it is connected with the
negative pole of the power supply with COM jack of the machine, can
be regarded as the ground output. Need to pay attention to the
following tips: 1, When using external adapter, the terminal should
be connected with the measured system of public ground;
2, When using 12V vehicle power supply, the terminal is connected
with the automobile bonding, can no longer leads. If you need to
ground output, you should avoid accidentally touch between the
terminal and the power supply (5V or 12V) positive power which can
cause short circuit fault.
2. Panel sketch and description
(Fig.57)Panel sketch and description
19. 1- liquid crystal display window
2- power driver LED display
3- power supply LED display
4- power / reset button
5- to the left selection key
6- confirm key
7- ground output jack
8- power output jack
9- voltage measurement input jack
10- pulse input jack
11- voltage measurement of LED display
12- pulse measurement LED display
13- to the right selection key
14- to select key
15- downward selection keys
3. Beginng interface and main menu
http://www.obdii.co.uk/ecu-chip-tuning-tool/sks-3058nauto-eecs-and-ecu-examine-analyzing-tester