NEW FIBREGLASS PRESENTATION
•Download as PPTX, PDF•
0 likes•282 views
The document discusses total refurbishment solutions for fibreglass swimming pools. It describes applying a new fibreglass lining using liquid polyester resins and fibreglass mat to form a joint-free, leak-proof membrane good for at least 20 years. Extensive preparation of pool surfaces is done prior to applying a new state-of-the-art gel coating system. Pools are then cleaned, filled and ready for use after swim lines are reinstated.
Report
Share
Report
Share
Recommended
Hydrophobic cement 1
In this article, we discuss the manufacture, properties, uses, advantages, disadvantages and safety precautions of hydrophobic cement.
Formation Damge
Formation damage refers to impairment of the reservoir caused by invasion of wellbore fluids during drilling or completion. It can be mechanical, by plugging of pore spaces, or chemical, such as clay swelling or precipitation of salts. Formation damage reduces permeability near the wellbore and hydrocarbon flow. While reservoir properties cannot be controlled, operational changes can minimize damage during drilling, completion and production to enhance well productivity.
Well stimulation - petroleum engineering
that is my presentation about well stimulation at Soran university in petroleum engineering department enjoy :)
Formation damage
This document discusses various types of formation damage that can occur including plugging by solid particles, plugging by formation solids, clay swelling, dispersion of clayey platelets, water block, emulsion formation, precipitation of inorganic scales, precipitation related to acidizing, mechanical damage, paraffin deposition, precipitation of asphaltene, wettability alteration, reduced relative permeability, sludge formation, damage by bacteria, polymer invasion, and gas breakout. Formation damage refers to any process that reduces permeability in the formation near the wellbore and decreases productivity over time. Common causes include invasion of foreign solids or fluids, changes in wettability, mineral precipitation, and bacterial growth. Proper design of completion and stimulation methods
TIGG ECONOSORB LP Portable Liquid Phase Steel Adsorber
Modular Activated Carbon Liquid Adsorber Series
For Removal of Organic Contaminants From Liquids
ECONOSORB LP - Portable Adsorber
The Econosorb LP Portable Steel Vessel Series Liquid
Phase Adsorbers are fabricated from carbon steel
and provided with a highsolids epoxy lining for long
life. Two 2” steel FNPT inlet/outlet fittings on the top of
the vessels are connected to PVC internals for execptional
flow distribution in down flow operating mode.
The units have a screened drain, 18 inch bolted top manway
for easy access. The forklift access slots and and overall
height make this unit truly transportable. These economical
units can be filled with any of TIGG’s media including
activated carbon, metal removal media. oil removal media
and perform well in low pressure applications.
*Specifications and properties are subject to change without
notice.
NOTES:
•
• Dry virgin activated or reactivated carbon provided as standard adsorbent.
• Adsorbent fill is based on a bed density of 27 lb/ft3.
• Adsorbent fill can differ based on variable bed density and alternate adsorbents<.
• Pressure drops are based on a dense packed bed of activated carbon.
I48076671
This document discusses self-curing or internal curing concrete, which provides internal water reservoirs through the use of materials like lightweight aggregates or super absorbent polymers to hydrate cement particles. Proper curing is important for concrete to develop strength and durability. Self-curing concrete reduces the need for external curing and can perform better in areas without sufficient water for curing. The document examines using polyvinyl alcohol as a self-curing agent and finds that it helps retain water in concrete and reduces weight loss compared to conventional mixes without compromising strength. Self-curing concrete offers advantages like reduced cracking, permeability and improved durability.
Hydraulic fracturing
Hydraulic fracturing involves pumping water mixed with proppant and additives into wells at high pressure to create fractures in rock formations and stimulate oil and gas production. The first successful hydraulic fracturing jobs occurred in the 1940s and 1950s. The process involves pad, slurry, and flowback stages. Parameters like in-situ stress, elastic properties, and fluid properties are considered for fracturing design. Fluid additives are used to carry proppant into the fracture and improve fluid properties. Pre-fracturing tests like step-rate and pump-in/flowback tests help determine fracture and closure pressures. Hydraulic fracturing has enabled production from tight shale and coalbed methane reservoirs.
Ballast Water Treatment with VOS™ | N.E.I. Treatment Systems
This presentation provides an overview of N.E.I. Treatment Systems, a pioneer in ballast water treatment systems. N.E.I. was the first to complete shipboard trials and receive type approval for its systems. It has also installed systems on multiple ship types. The presentation highlights N.E.I.'s Venturi Oxygen Stripping system, which uses inert gas to create a low-oxygen environment that kills aquatic organisms while preventing ballast tank corrosion. It has a global reach through partnerships and has installed 16 systems to date on various ship owners and types.
Recommended
Hydrophobic cement 1
In this article, we discuss the manufacture, properties, uses, advantages, disadvantages and safety precautions of hydrophobic cement.
Formation Damge
Formation damage refers to impairment of the reservoir caused by invasion of wellbore fluids during drilling or completion. It can be mechanical, by plugging of pore spaces, or chemical, such as clay swelling or precipitation of salts. Formation damage reduces permeability near the wellbore and hydrocarbon flow. While reservoir properties cannot be controlled, operational changes can minimize damage during drilling, completion and production to enhance well productivity.
Well stimulation - petroleum engineering
that is my presentation about well stimulation at Soran university in petroleum engineering department enjoy :)
Formation damage
This document discusses various types of formation damage that can occur including plugging by solid particles, plugging by formation solids, clay swelling, dispersion of clayey platelets, water block, emulsion formation, precipitation of inorganic scales, precipitation related to acidizing, mechanical damage, paraffin deposition, precipitation of asphaltene, wettability alteration, reduced relative permeability, sludge formation, damage by bacteria, polymer invasion, and gas breakout. Formation damage refers to any process that reduces permeability in the formation near the wellbore and decreases productivity over time. Common causes include invasion of foreign solids or fluids, changes in wettability, mineral precipitation, and bacterial growth. Proper design of completion and stimulation methods
TIGG ECONOSORB LP Portable Liquid Phase Steel Adsorber
Modular Activated Carbon Liquid Adsorber Series
For Removal of Organic Contaminants From Liquids
ECONOSORB LP - Portable Adsorber
The Econosorb LP Portable Steel Vessel Series Liquid
Phase Adsorbers are fabricated from carbon steel
and provided with a highsolids epoxy lining for long
life. Two 2” steel FNPT inlet/outlet fittings on the top of
the vessels are connected to PVC internals for execptional
flow distribution in down flow operating mode.
The units have a screened drain, 18 inch bolted top manway
for easy access. The forklift access slots and and overall
height make this unit truly transportable. These economical
units can be filled with any of TIGG’s media including
activated carbon, metal removal media. oil removal media
and perform well in low pressure applications.
*Specifications and properties are subject to change without
notice.
NOTES:
•
• Dry virgin activated or reactivated carbon provided as standard adsorbent.
• Adsorbent fill is based on a bed density of 27 lb/ft3.
• Adsorbent fill can differ based on variable bed density and alternate adsorbents<.
• Pressure drops are based on a dense packed bed of activated carbon.
I48076671
This document discusses self-curing or internal curing concrete, which provides internal water reservoirs through the use of materials like lightweight aggregates or super absorbent polymers to hydrate cement particles. Proper curing is important for concrete to develop strength and durability. Self-curing concrete reduces the need for external curing and can perform better in areas without sufficient water for curing. The document examines using polyvinyl alcohol as a self-curing agent and finds that it helps retain water in concrete and reduces weight loss compared to conventional mixes without compromising strength. Self-curing concrete offers advantages like reduced cracking, permeability and improved durability.
Hydraulic fracturing
Hydraulic fracturing involves pumping water mixed with proppant and additives into wells at high pressure to create fractures in rock formations and stimulate oil and gas production. The first successful hydraulic fracturing jobs occurred in the 1940s and 1950s. The process involves pad, slurry, and flowback stages. Parameters like in-situ stress, elastic properties, and fluid properties are considered for fracturing design. Fluid additives are used to carry proppant into the fracture and improve fluid properties. Pre-fracturing tests like step-rate and pump-in/flowback tests help determine fracture and closure pressures. Hydraulic fracturing has enabled production from tight shale and coalbed methane reservoirs.
Ballast Water Treatment with VOS™ | N.E.I. Treatment Systems
This presentation provides an overview of N.E.I. Treatment Systems, a pioneer in ballast water treatment systems. N.E.I. was the first to complete shipboard trials and receive type approval for its systems. It has also installed systems on multiple ship types. The presentation highlights N.E.I.'s Venturi Oxygen Stripping system, which uses inert gas to create a low-oxygen environment that kills aquatic organisms while preventing ballast tank corrosion. It has a global reach through partnerships and has installed 16 systems to date on various ship owners and types.
Foam drilling technology and methodology in Conventional and unconventional r...
Foam drilling Techniques introduction and basic concept why it is important and which types of field it may be applied.
Cemscreed hm
CEMSCREED HM is supplied as a ready-to-use, blend of dry powders which requires only site addition of water to produce a free flowing, non-shrink repair micro concrete. The materials is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic stage while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, mixed CEMSCREED HM can be modified by the addition of 12 mm clean, graded, saturated, surface dry aggregates at site.
Sesa Industries Limited, Goa
This is a presentation from Sesa Industries Limited, one of the finalists at the 5th CII-GBC National Award for Excellence in Water Management in 2008
The awards are in 2 categories, Within the Fence for work done on minimizing the organisations water footprint, and Beyond the Fence for work done in the community around the industry.
This presentation was in the "Within the Fence" category.
We thank CII and the respective companies for giving us permission to upload these presentations on the India Water Portal website for dissemination to a wider audience.
C3.2.11. Chemical Injection_2020
This document discusses chemical injection in offshore production systems. It explains that chemicals are used to address various threats to production like emulsions, foaming, blockages, and corrosion. For subsea and topside processing, chemicals like demulsifiers, anti-foams, corrosion inhibitors, asphaltene/wax inhibitors, scale inhibitors, and methanol are injected to prevent issues. For water injection, chemicals like hypochlorite, poly-electrolytes, oxygen scavengers, biocides, and scale inhibitors are used to address biofouling, filtration problems, oxygen, bacteria, and scale formation. The document provides details on the functions of these various chemicals.
UAIPD 15-0016
This document describes a new technology for storing and controlling the release of admixtures in concrete. Currently, admixtures added to concrete can have undesired effects on hydration. The new technology uses a two-step process: 1) perforated cenospheres are produced to load admixtures and 2) a nanosilica coating is applied to the cenospheres. This "hard encapsulation" method minimizes unwanted effects on hydration by storing the admixtures and controlling their release. The cenospheres have advantages like strength, stability, and ability to hold large amounts of admixture uniformly distributed in concrete.
Biological treatment of Waste water
Biological treatments rely on bacteria, nematodes, or other small organisms to break down organic wastes using normal cellular processes. Wastewater typically contains a buffet of organic matter, such as garbage, wastes, and partially digested foods. It also may contain pathogenic organisms, heavy metals, and toxins.
WELL COMPLETION, WELL INTERVENTION/ STIMULATION, AND WORKOVER
This document discusses various well completion, intervention, and workover topics including:
- Well completion involves preparing the well for production by installing equipment like casing and tubing.
- Open hole and cased hole completions are described, along with advantages and disadvantages of each.
- Well intervention operations like scale removal, acidizing, and sand cleaning are performed during production.
- Formation damage from fluids introduced into the well is also discussed.
- Stimulation techniques like acidizing and hydraulic fracturing aim to increase well productivity. The document outlines the processes, equipment, and evaluation of these operations.
- Other topics covered include intelligent well completions, perforating, sand control, squeeze cement
introduction to completions and workovers (2)
this is brief introduction about well completions and workovers by request of students for education purposes
Well Stimulation
This document discusses well stimulation techniques used to increase oil and gas production. It describes two main types of well stimulation: acidizing and hydraulic fracturing. Acidizing involves injecting acid to dissolve rock and increase permeability. There are two types of acidizing - matrix acidizing below fracture pressure to remove damage, and fracture acidizing above pressure to create open channels. Hydraulic fracturing uses pressurized fluid to crack rock, with proppant like sand injected to hold the fractures open and increase conductivity. Both techniques aim to extend fractures and improve hydrocarbon flow into the wellbore.
Coring casing and cementation and drilling fluids
The document discusses coring, casing, cementation, and drilling fluids used in oil and gas well construction. It defines coring as using a special drill bit to extract cylindrical rock samples. Casing is large diameter pipe inserted into drilled sections and cemented in place to protect and isolate different zones. Cementation involves pumping a cement and water slurry to bond and support the casing. Drilling fluids are used to balance pressures, carry cuttings to the surface, and lubricate the drill bit. The types and functions of various drilling fluids are also outlined.
Finish Ball Packaging
Ball Packaging is a food container manufacturing facility with uneven concrete slabs posing safety issues. Slab replacement and mudjacking were considered but eliminated due to disruption. Foundation Supportworks injected PolyLEVEL urethane foam through small ports to lift and level the slabs within 30 minutes with minimal dust and no impact to operations. The foam solution provided strength to support heavy forklifts without further settlement issues.
Fairflo s ncc
FAIRFLO S-NCC is supplied as brown liquid based on modified sulphonated Nepthalene slump retainer polymer. The powerful dispersing agent of the high range water reducing super plasticizer can be used in many ways to obtain dense, high strength durable concrete (M35, M40, M45 M50). The high water reduction properties makes of FAIRFLO S-NCC an ideal application in precast concrete where high early strength is of paramount importance. FAIRFLO S-NCC is chloride free.
Formation Damage
DAMAGE ISSUES IMPACTING THE PRODUCTIVITY OF TIGHT GAS PRODUCING FORMATIONS; Formation Damage; Fracturing/Refracturing; Hydraulically Fractured; Tight Gas Reservoir; Economic Tight Gas Reservoir Production
VDOT BMP Clearinghouse Specification 7- Permeable Pavement
Permeable pavement allows stormwater runoff to filter through voids in the pavement into an underlying stone reservoir, where it is temporarily stored or infiltrated. There are various permeable pavement surfaces like pervious concrete and porous asphalt. The major design goals are maximizing nutrient removal and runoff reduction. Design considerations include soil infiltration rates, structural loading capacity, and reservoir layer sizing. Proper construction and long-term maintenance like periodic vacuum sweeping are required to prevent surface clogging and ensure effective performance.
Petroleum well completion overview
This document provides an overview of well completion processes and equipment. It describes common casing types like surface casing, intermediate casing, and production casing. It explains the functions of casing to protect the wellbore, isolate fluid zones, and provide a conduit for tools. The document outlines the typical steps in a well completion, including running and cementing casing, perforating, stimulating, gravel packing if needed, and installing tubing and a Christmas tree. It provides details on related equipment like centralizers, float shoes, and packers. The document is intended as an introduction to well completion concepts and components for educational purposes.
Workover job ppe
The document discusses workover jobs, which refer to interventions done on oil and gas wells to repair downhole equipment and address reservoir issues affecting production. Workovers are necessary when mechanical failures occur or reservoir conditions change. Common reasons for workovers include replacing damaged equipment, fixing casing issues, removing stuck tools, and addressing natural reservoir damage or depletion that reduces productivity. Workovers can involve complex operations like milling packers, fishing operations, and zone recompletions to restore or boost well production.
Final Presentation (2)
The document summarizes a final seminar presentation on optimization of shale gas production through hydraulic fracturing. It provides an outline of the presentation sections including introduction, objectives, literature review, methodology, and conclusions. The introduction defines well stimulation techniques like acidizing and hydraulic fracturing and their purposes. It describes the aims of increasing permeability and communication between wells and reservoirs. Key challenges of hydraulic fracturing discussed include potential water and air contamination from chemicals and activities, and management of materials like proppant and produced water.
06 drilling fluids
This document discusses drilling fluids and their applications. It begins by introducing drilling fluids as the "blood" of drilling operations, accounting for over 20% of operating costs. It then discusses the types of drilling fluids (water-based muds, oil-based muds, synthetic-based muds), their functions, properties, composition, classifications based on rheological models, design, and the effects of high pressure and high temperature on fluid properties. The document provides a comprehensive overview of drilling fluids to understand their formulation and optimization for drilling operations.
Fiberglass pool refurbishment
Filtration Water Services provides fiberglass pool resurfacing services that beautify dull pool surfaces with a sparkling, permanent fiberglass finish. Fiberglass eliminates the need for acid washing, painting, and re-plastering as it is highly durable and will not degrade like vinyl liners. The fiberglass application gives pools a long-lasting, improved appearance over traditional resurfacing methods.
Starting blocks competition pool equipment
The document discusses the installation of 5 starting blocks for a competition pool. The starting blocks have adjustable platforms made of polyester and fibreglass with non-slip finishes that are 500mm by 500mm in size. They are anchored for secure fixing and numbered 1 through 5. Side views of the starting blocks are also shown.
Hose pipe ban leak detection
Seven water companies in the south and east of England announced hose pipe bans due to the ongoing drought, with strict enforcement by water authorities. Having a swimming pool over 1.5 meters deep uses large amounts of unnecessary energy and water. Reducing pool depth by refurbishment through companies like Total Swimming Pool Refurbishment Solutions can save homeowners an average of 35% on water usage while also lowering energy bills. They offer free site assessments and services like pool depth reduction and leak detection.
FILTRATION WATER SERVICES POOL REDUCTION TO PRIVATE LEISURE CENTRE ENERGY SAV...
ENERGY SAVING POOL DEPTH REDUCTION AT A PRIVATE LEISURE CENTRE - POOL DEPTH REDUCED BY 1 METRE TO GIVE SHALLOWER FLAT POOL AREA FOR AQUA AEROBICS SAVES ENERGY GENERATES REVENUE
More Related Content
What's hot
Foam drilling technology and methodology in Conventional and unconventional r...
Foam drilling Techniques introduction and basic concept why it is important and which types of field it may be applied.
Cemscreed hm
CEMSCREED HM is supplied as a ready-to-use, blend of dry powders which requires only site addition of water to produce a free flowing, non-shrink repair micro concrete. The materials is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic stage while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, mixed CEMSCREED HM can be modified by the addition of 12 mm clean, graded, saturated, surface dry aggregates at site.
Sesa Industries Limited, Goa
This is a presentation from Sesa Industries Limited, one of the finalists at the 5th CII-GBC National Award for Excellence in Water Management in 2008
The awards are in 2 categories, Within the Fence for work done on minimizing the organisations water footprint, and Beyond the Fence for work done in the community around the industry.
This presentation was in the "Within the Fence" category.
We thank CII and the respective companies for giving us permission to upload these presentations on the India Water Portal website for dissemination to a wider audience.
C3.2.11. Chemical Injection_2020
This document discusses chemical injection in offshore production systems. It explains that chemicals are used to address various threats to production like emulsions, foaming, blockages, and corrosion. For subsea and topside processing, chemicals like demulsifiers, anti-foams, corrosion inhibitors, asphaltene/wax inhibitors, scale inhibitors, and methanol are injected to prevent issues. For water injection, chemicals like hypochlorite, poly-electrolytes, oxygen scavengers, biocides, and scale inhibitors are used to address biofouling, filtration problems, oxygen, bacteria, and scale formation. The document provides details on the functions of these various chemicals.
UAIPD 15-0016
This document describes a new technology for storing and controlling the release of admixtures in concrete. Currently, admixtures added to concrete can have undesired effects on hydration. The new technology uses a two-step process: 1) perforated cenospheres are produced to load admixtures and 2) a nanosilica coating is applied to the cenospheres. This "hard encapsulation" method minimizes unwanted effects on hydration by storing the admixtures and controlling their release. The cenospheres have advantages like strength, stability, and ability to hold large amounts of admixture uniformly distributed in concrete.
Biological treatment of Waste water
Biological treatments rely on bacteria, nematodes, or other small organisms to break down organic wastes using normal cellular processes. Wastewater typically contains a buffet of organic matter, such as garbage, wastes, and partially digested foods. It also may contain pathogenic organisms, heavy metals, and toxins.
WELL COMPLETION, WELL INTERVENTION/ STIMULATION, AND WORKOVER
This document discusses various well completion, intervention, and workover topics including:
- Well completion involves preparing the well for production by installing equipment like casing and tubing.
- Open hole and cased hole completions are described, along with advantages and disadvantages of each.
- Well intervention operations like scale removal, acidizing, and sand cleaning are performed during production.
- Formation damage from fluids introduced into the well is also discussed.
- Stimulation techniques like acidizing and hydraulic fracturing aim to increase well productivity. The document outlines the processes, equipment, and evaluation of these operations.
- Other topics covered include intelligent well completions, perforating, sand control, squeeze cement
introduction to completions and workovers (2)
this is brief introduction about well completions and workovers by request of students for education purposes
Well Stimulation
This document discusses well stimulation techniques used to increase oil and gas production. It describes two main types of well stimulation: acidizing and hydraulic fracturing. Acidizing involves injecting acid to dissolve rock and increase permeability. There are two types of acidizing - matrix acidizing below fracture pressure to remove damage, and fracture acidizing above pressure to create open channels. Hydraulic fracturing uses pressurized fluid to crack rock, with proppant like sand injected to hold the fractures open and increase conductivity. Both techniques aim to extend fractures and improve hydrocarbon flow into the wellbore.
Coring casing and cementation and drilling fluids
The document discusses coring, casing, cementation, and drilling fluids used in oil and gas well construction. It defines coring as using a special drill bit to extract cylindrical rock samples. Casing is large diameter pipe inserted into drilled sections and cemented in place to protect and isolate different zones. Cementation involves pumping a cement and water slurry to bond and support the casing. Drilling fluids are used to balance pressures, carry cuttings to the surface, and lubricate the drill bit. The types and functions of various drilling fluids are also outlined.
Finish Ball Packaging
Ball Packaging is a food container manufacturing facility with uneven concrete slabs posing safety issues. Slab replacement and mudjacking were considered but eliminated due to disruption. Foundation Supportworks injected PolyLEVEL urethane foam through small ports to lift and level the slabs within 30 minutes with minimal dust and no impact to operations. The foam solution provided strength to support heavy forklifts without further settlement issues.
Fairflo s ncc
FAIRFLO S-NCC is supplied as brown liquid based on modified sulphonated Nepthalene slump retainer polymer. The powerful dispersing agent of the high range water reducing super plasticizer can be used in many ways to obtain dense, high strength durable concrete (M35, M40, M45 M50). The high water reduction properties makes of FAIRFLO S-NCC an ideal application in precast concrete where high early strength is of paramount importance. FAIRFLO S-NCC is chloride free.
Formation Damage
DAMAGE ISSUES IMPACTING THE PRODUCTIVITY OF TIGHT GAS PRODUCING FORMATIONS; Formation Damage; Fracturing/Refracturing; Hydraulically Fractured; Tight Gas Reservoir; Economic Tight Gas Reservoir Production
VDOT BMP Clearinghouse Specification 7- Permeable Pavement
Permeable pavement allows stormwater runoff to filter through voids in the pavement into an underlying stone reservoir, where it is temporarily stored or infiltrated. There are various permeable pavement surfaces like pervious concrete and porous asphalt. The major design goals are maximizing nutrient removal and runoff reduction. Design considerations include soil infiltration rates, structural loading capacity, and reservoir layer sizing. Proper construction and long-term maintenance like periodic vacuum sweeping are required to prevent surface clogging and ensure effective performance.
Petroleum well completion overview
This document provides an overview of well completion processes and equipment. It describes common casing types like surface casing, intermediate casing, and production casing. It explains the functions of casing to protect the wellbore, isolate fluid zones, and provide a conduit for tools. The document outlines the typical steps in a well completion, including running and cementing casing, perforating, stimulating, gravel packing if needed, and installing tubing and a Christmas tree. It provides details on related equipment like centralizers, float shoes, and packers. The document is intended as an introduction to well completion concepts and components for educational purposes.
Workover job ppe
The document discusses workover jobs, which refer to interventions done on oil and gas wells to repair downhole equipment and address reservoir issues affecting production. Workovers are necessary when mechanical failures occur or reservoir conditions change. Common reasons for workovers include replacing damaged equipment, fixing casing issues, removing stuck tools, and addressing natural reservoir damage or depletion that reduces productivity. Workovers can involve complex operations like milling packers, fishing operations, and zone recompletions to restore or boost well production.
Final Presentation (2)
The document summarizes a final seminar presentation on optimization of shale gas production through hydraulic fracturing. It provides an outline of the presentation sections including introduction, objectives, literature review, methodology, and conclusions. The introduction defines well stimulation techniques like acidizing and hydraulic fracturing and their purposes. It describes the aims of increasing permeability and communication between wells and reservoirs. Key challenges of hydraulic fracturing discussed include potential water and air contamination from chemicals and activities, and management of materials like proppant and produced water.
06 drilling fluids
This document discusses drilling fluids and their applications. It begins by introducing drilling fluids as the "blood" of drilling operations, accounting for over 20% of operating costs. It then discusses the types of drilling fluids (water-based muds, oil-based muds, synthetic-based muds), their functions, properties, composition, classifications based on rheological models, design, and the effects of high pressure and high temperature on fluid properties. The document provides a comprehensive overview of drilling fluids to understand their formulation and optimization for drilling operations.
What's hot (18)
Foam drilling technology and methodology in Conventional and unconventional r...
Foam drilling technology and methodology in Conventional and unconventional r...
WELL COMPLETION, WELL INTERVENTION/ STIMULATION, AND WORKOVER
WELL COMPLETION, WELL INTERVENTION/ STIMULATION, AND WORKOVER
VDOT BMP Clearinghouse Specification 7- Permeable Pavement
VDOT BMP Clearinghouse Specification 7- Permeable Pavement
Viewers also liked
Fiberglass pool refurbishment
Filtration Water Services provides fiberglass pool resurfacing services that beautify dull pool surfaces with a sparkling, permanent fiberglass finish. Fiberglass eliminates the need for acid washing, painting, and re-plastering as it is highly durable and will not degrade like vinyl liners. The fiberglass application gives pools a long-lasting, improved appearance over traditional resurfacing methods.
Starting blocks competition pool equipment
The document discusses the installation of 5 starting blocks for a competition pool. The starting blocks have adjustable platforms made of polyester and fibreglass with non-slip finishes that are 500mm by 500mm in size. They are anchored for secure fixing and numbered 1 through 5. Side views of the starting blocks are also shown.
Hose pipe ban leak detection
Seven water companies in the south and east of England announced hose pipe bans due to the ongoing drought, with strict enforcement by water authorities. Having a swimming pool over 1.5 meters deep uses large amounts of unnecessary energy and water. Reducing pool depth by refurbishment through companies like Total Swimming Pool Refurbishment Solutions can save homeowners an average of 35% on water usage while also lowering energy bills. They offer free site assessments and services like pool depth reduction and leak detection.
FILTRATION WATER SERVICES POOL REDUCTION TO PRIVATE LEISURE CENTRE ENERGY SAV...
ENERGY SAVING POOL DEPTH REDUCTION AT A PRIVATE LEISURE CENTRE - POOL DEPTH REDUCED BY 1 METRE TO GIVE SHALLOWER FLAT POOL AREA FOR AQUA AEROBICS SAVES ENERGY GENERATES REVENUE
TOTAL SWIMMING POOL REFURBISHMENT pool depth reduction.to private leisure ce...
The document describes the process of reducing the depth of an existing swimming pool. This involved draining the pool, cutting into the pool floor to create a niche for new tiling, constructing lightweight walls, pumping in 30 cubic meters of lightweight concrete to build up the new shallow floor level, laying a screed over the concrete for tiling, regrouting pool walls, tiling the new screeded floor to match the existing, and completing the works to provide energy, water, and chemical savings as well as a flatter shallow area and improved health and safety features.
E air con filters etc presentation
A hydrotherapy school swimming pool underwent a total refurbishment that included lengthening and widening the pool, deepening it, tiling it, converting it to a semi-level deck, installing a new filter plant and chemical dosing system, and adding a custom air conditioning system. The refurbishment transformed the pool's skimmer system to a semi-level deck using bespoke anti-wave panels and included external ducting from an air conditioning unit and internal powder coated tubular hot air ducting.
FILTRATION WATER SERVICES - MAJOR TILING REFURBISHMENT TO OUT DOOR POOL
Filtration Water Services Limited refurbished and tiled an existing outdoor fiberglass pool over approximately 5 weeks. The project involved removing the existing fiberglass liner; mosaic tiling the pool, painting the concrete surround, and acid washing the existing tiles. A new dosing system and repairs to pipework were also completed, along with installing a new pool cover and improving the clean water distribution system. Before and after photos show the transformation from an aging pool to a beautifully tiled and finished pool that was completed on time and on budget.
TOTAL SWIMMING POOL REFURBISHMENTS length extention from 4.95 m to 6.22 m long
The document describes the extension of an existing 4.95m long hydrotherapy pool to 6.22m long. This was done by cutting out the original end wall and promenade to the new length, trimming the existing pool walls to connect to the new extension walls, and constructing the new end walls, raised floor, and tiling the extension.
TOTAL SWIMMING POOL REFURBISHMENT MAJOR PLANT REFURBISHMENT
A MAJOR POOL PLANT REFURBISHMENT AT A LEISURE CENTRE IN GREAT YARMOUTH
PUMP SETS
CHEMICAL DOSING
HORIZONTAL FILTERS
Major refurbishmentand tiling of outdoor pool
The document summarizes the refurbishment of an existing fibreglass outdoor swimming pool. It involved removing the existing fibreglass liner and mosaic tiling, painting the concrete surround, cleaning the flags, fitting a new dosing system and repairs. Photos show the removal of the old liner, tiling process, cleaning, and the finished pool. The project was completed in 5 weeks, on time and on budget to the customer's satisfaction.
HOSE PIPE BAN FOR MILLIONS
Seven water companies announced hose pipe bans for millions in the south and east of England due to drought conditions. The restrictions will remain in place and be enforced by water authorities throughout the summer and beyond. Reducing swimming pool depths by over 1.5 meters can save over 35% on water usage on average according to Filtration Water Services Limited, which offers free site assessments and services to help customers save water through pool depth reduction, leak detection, and other methods.
Filtation water services pool depth reduction.to private leisure centre
Filtration Water Services was contracted to reduce the depth of a private leisure centre pool. They drained the pool and cut a niche in the existing floor for new tiling. Lightweight walls and 30 cubic meters of lightweight concrete were installed to reach the finished height. A screed was laid over the concrete and areas of missing grout in the walls were re-grouted. Upon completion, the works provided energy and water savings, a flatter area for classes, and improved safety and access.
Filtation water services pool length extention from 4.95 m to 6.22 m long
The document describes the extension of an existing hydrotherapy pool from 4.95 meters to 6.22 meters long. This was done by cutting out the original end wall and promenade, trimming the existing pool walls to connect to new extension walls, constructing new end walls and shelf with render, extending the pool floor to the new depth, and tiling the new end wall and shelf.
Filtation water services pool depth reduction.to private leisure centre
Filtration Water Services Limited reduced the depth of a private leisure centre pool. They cut a niche in the existing pool floor and constructed lightweight walls to allow pumping in 30 cubic metres of lightweight concrete to raise the floor. Works were completed including tiling the new screeded floor to match the existing, regrouting pool walls, and benefits were gained such as energy, water, and chemical savings as well as improved safety and access.
Filtration water services limited intro power point
Total Swimming Pool Refurbishment Solutions is a family-owned business that specializes in swimming pool plant, pumping, chemical dosing, control, air conditioning, leak detection, and energy saving pool depth reduction. The company is introducing itself in hopes that it can assist with bespoke swimming pool needs. Both company directors work on site with installation staff to ensure quality on all projects.
Viewers also liked (15)
FILTRATION WATER SERVICES POOL REDUCTION TO PRIVATE LEISURE CENTRE ENERGY SAV...
FILTRATION WATER SERVICES POOL REDUCTION TO PRIVATE LEISURE CENTRE ENERGY SAV...
TOTAL SWIMMING POOL REFURBISHMENT pool depth reduction.to private leisure ce...
TOTAL SWIMMING POOL REFURBISHMENT pool depth reduction.to private leisure ce...
FILTRATION WATER SERVICES - MAJOR TILING REFURBISHMENT TO OUT DOOR POOL
FILTRATION WATER SERVICES - MAJOR TILING REFURBISHMENT TO OUT DOOR POOL
TOTAL SWIMMING POOL REFURBISHMENTS length extention from 4.95 m to 6.22 m long
TOTAL SWIMMING POOL REFURBISHMENTS length extention from 4.95 m to 6.22 m long
TOTAL SWIMMING POOL REFURBISHMENT MAJOR PLANT REFURBISHMENT
TOTAL SWIMMING POOL REFURBISHMENT MAJOR PLANT REFURBISHMENT
Filtation water services pool depth reduction.to private leisure centre
Filtation water services pool depth reduction.to private leisure centre
Filtation water services pool length extention from 4.95 m to 6.22 m long
Filtation water services pool length extention from 4.95 m to 6.22 m long
Filtation water services pool depth reduction.to private leisure centre
Filtation water services pool depth reduction.to private leisure centre
Filtration water services limited intro power point
Filtration water services limited intro power point
Similar to NEW FIBREGLASS PRESENTATION
Advance services
This document discusses different types of swimming pool finishes and construction processes. It describes open and skimmer overflow types of pools. It also summarizes the construction process, including layout, excavation, compaction, concrete laying, and brick wall installation. Pool finishes discussed include plaster, aggregate, quartz, and tile finishes. Plaster is one of the oldest and cheapest options but can degrade over time.
Designer Pool Covers Brochure .pdf
Designer Pool Covers have been the trendsetters and industry leaders in the supply and installation of Automatic and Manual Pool Covers in South Africa since 2012 with industry experience of over 10 years. As our delighted owners and existing clients have already discovered – our pool covers are the finest, safest and easiest-to-use pool covers on the market. Whether you have an existing pool or planning to build a new one, the most important accessory is a pool cover. Our highly experienced and qualified team look forward to providing you with the ultimate pool cover solution to suit your requirements. We urge you to implement this plan today!
Waterproofing step by step.pdf
This document summarizes waterproofing methodologies for various areas and structures. It discusses the types of waterproofing, including liquid, sheet, and geotextile membranes. Precautions are outlined for proper installation of waterproofing on concrete, masonry, and plaster surfaces. The stages of internal and external liquid and sheet waterproofing installation are described, including surface preparation, application of primer and membrane layers, and protection methods.
Aquaurethane Extreme - Regulation 31 Approved Polyurea by LINE-X
PRODUCT USE DESCRIPTION
LINE-X Aquaurethane Extreme is designed to be used to coat existing substrates that have become porous. For example, by coating the external concrete surface of underground reservoirs that are starting to leak you will be able to prevent untreated rainwater from leaking into the reservoirs. This product can also be used to line the internal walls of the reservoirs to prevent the water from leaking out into the groundwater whilst also preventing the groundwater from penetrating the sidewalls into the drinking water.
Aquaurethane Extreme is Regulation 31 Approved.
Find out more by visiting https://line-x.co.uk/heavy-industrial/aquaurethane-extreme/
underwater repair
This document discusses techniques for underwater repairs. It outlines that underwater repairs are more difficult and costly than above-water repairs due to challenges with materials, access, and inspection. Preparation of the damaged area requires specialized cleaning and removal techniques. Patch repairs and crack injections can be done with special cementitious or epoxy mortars suitable for underwater use. Large repairs require bulk placement methods and leak-tight formwork to contain repair materials.
Current status of fuel technology
The document discusses various technologies for reducing emissions from ship engines, including those that reduce NOx and SOx emissions. It discusses methods such as humid air injection, exhaust gas recirculation, water injection, and selective catalytic reduction to reduce NOx. It discusses using low-sulfur fuels and exhaust gas scrubbers to reduce SOx. It also discusses liquefied natural gas carriers and technologies for reliquefying boil-off gas, including multi-stage compression and closed-loop nitrogen cycles to efficiently re-liquefy gas.
Specification Guide: Remember Its Waterproof (RIW Ltd)
The RIW product range has expanded and evolved over the years, to suit the ever changing needs of our customer’s projects. Now incorporating a wide range of diverse waterproofing solutions that are suitable for use above, below and at ground level, offering complete waterproofing assurance to architects, engineers and contractors.
http://www.riw.co.uk/
Gyprock-Wet Areas-installation-guide.pdf
This document provides installation guidelines for Gyprock plasterboard systems in residential construction. It discusses materials used, including moisture resistant plasterboards for wet areas. It provides details on stud framing, plasterboard installation, and construction details for various wet area applications like showers, baths, and basins. These include using preformed shower bases/trays, waterproof membranes, perimeter flashing, and sealing details. The document aims to provide information to properly install plasterboard systems that meet standards like AS3740 for wet area construction.
Protective coating for concrete
This document discusses protective coatings for concrete provided by Sika. It provides an overview of Sika's experience developing coating systems to protect concrete structures around the world for decades. The document discusses Sika's life cycle assessment approach, sustainable concrete protection options, proven long-term durability of Sika coatings based on past projects, key factors in selecting protective coatings, and case studies of award-winning projects.
Admixtures And Their Properties
This document discusses different types of admixtures used in concrete, including their uses and effects. It covers mineral admixtures like fly ash and silica fume that can reduce costs and improve properties. It also discusses chemical admixtures, specifically highlighting water reducers, superplasticizers, accelerators, and retarders. Water reducers and superplasticizers can lower the water-cement ratio while maintaining workability, leading to increased strength. Accelerators can reduce setting time while retarders have the opposite effect of delaying setting.
bro_sika-waterproofing-brochure.pdf
The document discusses various waterproofing solutions from Sika for below ground structures. Sika offers fully integrated systems that are durable, tested, and certified. Their solutions include watertight concrete, bonded sheet membranes, compartmentalized membranes, liquid applied membranes, cavity drainage systems, mortars, and coatings. These different product types vary in their level of concrete protection, water resistance, performance characteristics, safety, and suitability for new construction versus refurbishment. Sika provides full technical support from design to installation and maintenance.
pool depth reduction
The document describes the process of reducing the depth of a leisure centre training pool. It details the steps taken which included draining the pool, removing the liner, deglazing existing tiles, pumping in lightweight concrete to create the new shallower floor level, tiling the walls and flooring the pool with epoxy coating, and completing the works ready for refilling the pool.
EOR- enhance oil recovery
This presentation discusses enhanced oil recovery (EOR) techniques, which are used to extract additional oil from reservoirs beyond primary and secondary recovery. EOR methods include thermal injection like steam flooding, chemical injection using polymers or surfactants, and gas injection using carbon dioxide. Steam flooding is the most common thermal method, using steam to heat and liquefy thick crude oil. Chemical injection helps lower tensions and mobilize oil droplets. Gas injection, like CO2 flooding, dissolves gases in oil to lower its viscosity. While EOR extends oil production and is often economically viable, challenges include equipment corrosion and gas storage.
Self Curing Concrete and Its Inherentproperties
Today concrete is most widely used construction material due to its good compressive strength and durability. It is estimated that the present consumption of concrete in the world is of the order of 10 billion tonnes (12 billion tons) every year. Depending upon the nature of work, the cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce plain and fresh concrete. The strength and durability of concrete will be fully developed only if it is cured. No action to this end is required, however, when ambient conditions of moisture, humidity, and temperature are sufficiently favorable to curing. Concrete is needed to be provided with moisture for a minimum period of 28 days for good hydration and to attain desired strength. Any laxity in curing will badly affect the strength and durability of concrete. A water/cement ratio of about 0.38 would be required to hydrate all the particles of cement and also to occupy the space in gel pores.
Enhached oil recovery EOR
This document discusses various enhanced oil recovery (EOR) methods, including waterflooding, surfactant/polymer flooding, polymer flooding, miscible gas flooding using CO2 and hydrocarbons, nitrogen/flue gas flooding, and thermal methods like steamflooding. For each method, the document provides a brief description, discusses the mechanisms for improving oil recovery efficiency, and outlines typical limitations and challenges. It also presents screening criteria charts for evaluating the suitability of different EOR methods based on factors like reservoir depth, oil viscosity, and permeability.
Vidhi seminar
This document discusses different types of concrete admixtures, including air entraining admixtures, plasticizers, superplasticizers, retarders, accelerators, and coloring admixtures. Concrete admixtures are added to concrete mixes to impart desirable properties. Air entraining admixtures introduce tiny air bubbles that increase frost and scaling resistance. Plasticizers and superplasticizers reduce the water content needed for workability or increase workability at the same water content. Retarders slow hydration for longer workability, while accelerators speed strength development. Coloring admixtures are used for aesthetics and safety. Admixtures can modify properties like workability, strength, permeability and curing time.
Agc wp-hydroscavprincop
The Hydroscav uses a patented Aero-Jet Mixer to intimately mix heated oil with air, vaporizing water in the oil. This mixture separates in a vessel, with dry oil returning to storage and moist air venting. It can remove water, solids, and dissolved hydrocarbons up to C9. An optional nitrogen injection further aids in removing gases like hydrogen sulfide. Hydroscavs operate continuously with minimal maintenance to extend the useful life of industrial oils.
Cement additives
Cementing involves pumping cement slurry down the casing string to isolate formations and support the casing. Key steps include:
1. Pumping cement slurry down the casing string after displacing drilling mud with a spacer fluid.
2. Releasing cement plugs to separate the cement from other fluids and indicate when cement displacement is complete.
3. Allowing the cement to set and harden before testing the zonal isolation provided by the cement sheath.
Proper additives, testing, calculations and centralization of the casing are important to achieve a good cement bond between the casing and formation.
Well_Completions.pdf
This document discusses well completion, which involves all post-drilling operations necessary for hydrocarbon production. It describes how completion planning must consider reservoir characteristics, fluid properties, and production forecasts to optimize equipment selection and well design. The document outlines different types of completions, including open hole, cased hole, tubingless, packerless, single string, selective, and multiple string configurations. Factors that influence completion design are also summarized such as reservoir pressure, permeability, fluid chemistry, temperature, and long-term production.
Pontevedra 2d1johnson
This document provides information on subfloor preparation and moisture mitigation for concrete slabs. It discusses concrete slab basics, sources of moisture in slabs and testing methodologies. It also reviews treatments for slabs with moisture issues, including penetrating sealers, topical sealers, epoxy coatings, cementitious overlays, and dual-function adhesives. The document also addresses repairing defects in concrete surfaces using cement-based products, and repairing cracks through mechanical preparation and cleaning. Proper subfloor preparation and moisture mitigation is important to prevent future moisture-related flooring issues.
Similar to NEW FIBREGLASS PRESENTATION (20)
Aquaurethane Extreme - Regulation 31 Approved Polyurea by LINE-X
Aquaurethane Extreme - Regulation 31 Approved Polyurea by LINE-X
Specification Guide: Remember Its Waterproof (RIW Ltd)
Specification Guide: Remember Its Waterproof (RIW Ltd)
Recently uploaded
This is an exciting platform game called Geometry Dash
Playing this fast-paced game, you control a small cube that has to get through stages that get harder by avoiding spikes, obstacles, and dangerous gaps while keeping up a fast pace. Though, it's important to remember that Geometry Dash isn't a simple game to get good at. No matter what mistake you make, you will face a tough position and have to start at the beginning.
The sounds and sights in Geometry Dash are very interesting. Your attention will be drawn to the simple style and catchy melodies. While the game looks good, it's not just visually challenging; getting through the tricky rounds requires quick thinking and reflexes.
The stages get harder over time, testing your skills and forcing you to find new ways to get past problems that other people have found impossible. Your experience with Geometry Dash will be remembered for a long time because of how satisfying it is to beat a difficult level or find a secret route. Join the many people who love Geometry Dash and are fascinated by this exciting and fun game. Get ready, because things will move quickly!
Turkey vs Georgia Tickets: Turkey's Redemption Quest in Euro 2024, A Preview
Euro Cup Germany fans worldwide can book Euro 2024 Tickets from our online platform www.eticketing.co.Fans can book Euro Cup 2024 Tickets on our website at discounted prices.
Turkey vs Georgia Prospects and Challenges in Euro Cup Germany.docx
Georgia is the clear outsider in Collection F which also has Cristiano Ronaldo’s Portugal, Turkey and the Czech Republic
Kylian Mbappe Misses Euro 2024 Training Due to Sickness Bug.docx
France is among the top contenders to win Euro Cup 2024 and will rely on star forward and captain Kylian Mbappe to lead Didier Deschamps' team to success in Germany
Serbia vs England Tickets: Serbia Gears Up for a Historic Campaign at UEFA Eu...
Eticketing.co offers UEFA Euro 2024 Tickets to admirers who can get Serbia vs England Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
Serbia vs England Tickets: Serbia's Historic Euro 2024 Journey, A Blend of Ex...
Eticketing.co offers UEFA Euro 2024 Tickets to admirers who can get Serbia vs England Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
快速制作加拿大西蒙菲莎大学毕业证（sfu毕业证书）硕士学位证书原版一模一样
原版一模一样【微信：741003700 】【加拿大西蒙菲莎大学毕业证（sfu毕业证书）硕士学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Serbia vs England Tickets: Serbia's Euro Cup Germany Journey and England's An...
Eticketing.co offers UEFA Euro 2024 Tickets to admirers who can get Serbia vs England Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
Georgia vs Portugal Historic Euro Cup 2024 Journey, Key Players, and Betting ...
Euro Cup 2024 fans worldwide can book Georgia vs Portugal Tickets from our online platform www.eticketing.co. Fans can book Euro Cup Germany Tickets on our website at discounted prices.
❽❽❻❼❼❻❻❸❾❻ Matka BOSS Result | Satta Matka Tips | Kalyan Matka 143
Satta BOSS Matka | DpBoss Matka | Matka BOSS Result | Satta Matka Tips | Kalyan Matka 143 · SATTA KING · ➥ SATTA MATKA TIME TEBAL · SATTA KING · ➥ Weekly ...
一比一原版(Curtin毕业证)科廷大学毕业证如何办理
Curtin硕士学位证成绩单【微信95270640】科廷大学没毕业>办理科廷大学毕业证成绩单【微信Curtin】Curtin毕业证成绩单Curtin学历证书Curtin文凭《Curtin毕业套号文凭网认证科廷大学毕业证成绩单》《哪里买科廷大学毕业证文凭Curtin成绩学校快递邮寄信封》《开版科廷大学文凭》Curtin留信认证本科硕士学历认证
【实体公司】办科廷大学科廷大学毕业证offer学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.科廷大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供科廷大学科廷大学毕业证offer办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640着接听一个劲地提醒父亲别忘了正月说的话电话那头总会传来父亲嘿嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第无
OLYMPIC MEN'S 100 METERS GOLD MEDALISTS.pptx
Olympic Gold medalist in 100m sprint from Athens 1896 to Tokyo 2020
一比一原版(Columbia毕业证)哥伦比亚大学毕业证如何办理
Columbia毕业证假文凭【微信95270640】办文凭{哥伦比亚大学毕业证}Q微Q微信95270640Columbia毕业证书成绩单/学历认证Columbia Diploma未毕业、挂科怎么办？+QQ微信：Q微信95270640-大学Offer（申请大学）、成绩单（申请考研）、语言证书、在读证明、使馆公证、办真实留信网认证、真实大使馆认证、学历认证
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理哥伦比亚大学哥伦比亚大学硕士学位证成绩单流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！将要跨出门槛的一刹那山娃突然抱紧父亲的大腿嚎啕大哭父亲吃力地掰开山娃的手哽咽道山娃好好听话好好念书到了暑假爸也接你进城爸的城好远好大好美山娃于是天天扳着手指算计着读书也格外刻苦无奈时间总过得太慢太慢每次父亲往家打电话山娃总抢着接听一个劲地提醒父亲别忘了正月说的话电话那头总会传来父亲嘿嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果不
Indian Premier League (IPL) ---2024.pptx
The Indian Premier League (IPL) is one of the most prominent and lucrative Twenty20 (T20) cricket leagues in the world. Since its inception in 2008, the IPL has revolutionized the landscape of cricket by blending sports, entertainment, and commerce. This summary provides an overview of the IPL's history, structure, notable performances, controversies, and its impact on cricket and beyond.
History and Formation
The IPL was launched by the Board of Control for Cricket in India (BCCI) in 2008, inspired by the success of domestic T20 leagues like the English T20 Cup and the now-defunct Indian Cricket League (ICL). Lalit Modi, the then Vice-President of BCCI, played a crucial role in conceptualizing and launching the league. The inaugural season kicked off in April 2008 with eight franchises representing different cities in India.
Structure and Format
The IPL follows a franchise-based model, where teams are owned by a mix of corporations, Bollywood stars, and other high-profile individuals. The league originally started with eight teams, although the number has fluctuated over the years due to various reasons including expansions and terminations. As of the latest seasons, the IPL features ten teams.
The tournament format includes a double round-robin stage, where each team plays the others twice, followed by playoffs. The top four teams from the round-robin stage qualify for the playoffs, which consist of two qualifiers, an eliminator, and the final. This format ensures a highly competitive and engaging tournament, culminating in a grand finale to crown the champion.
Teams and Their Evolution
The founding teams of the IPL were:
Chennai Super Kings (CSK)
Delhi Daredevils (now Delhi Capitals)
Kings XI Punjab (now Punjab Kings)
Kolkata Knight Riders (KKR)
Mumbai Indians (MI)
Rajasthan Royals (RR)
Royal Challengers Bangalore (RCB)
Deccan Chargers (now defunct, replaced by Sunrisers Hyderabad)
Over the years, the league has seen new teams such as Pune Warriors India, Kochi Tuskers Kerala, Gujarat Lions, and Rising Pune Supergiant. The most recent additions are the Gujarat Titans and Lucknow Super Giants, introduced in the 2022 season.
Iconic Players and Performances
The IPL has attracted the best talent from around the world, with numerous iconic players making significant contributions. Some of the standout performers include:
Sachin Tendulkar (MI): The "Little Master" brought his legendary status to the IPL, winning the Orange Cap (top run-scorer) in 2010.
Chris Gayle (RCB, KXIP): Known for his explosive batting, Gayle holds the record for the highest individual score in an IPL match (175*).
MS Dhoni (CSK): Dhoni's leadership has been instrumental in CSK's success, leading them to multiple titles.
AB de Villiers (RCB): Renowned for his innovative stroke play, de Villiers has been a consistent match-winner.
Virat Kohli (RCB): The highest run-scorer in IPL history, Kohli's batting prowess is unmatched.
La
Olympic 2024 Esha Singh's Journey to the Olympic a Young Shooter's Rise, Chal...
Paris 2024 fans worldwide can book Olympic Shooting Tickets from our online platforms e-ticketing. co. Fans can book Olympic Tickets on our website at discounted prices. Experience the thrill of the Games in Paris and support your favourite athletes as they compete for glory.
Project 9 - Strategy (24/25 Season)
This presentation is version 3 of the strategic plan for Real Bedford Football Club.
Our goals are:
1. Men's Team - To bring League Football to Bedford and ultimately get us into the Premier League.
2. Women's' Team - To bring Championship to Bedford and ultimately get us into the Women's Super League.
Euro 2024 Predictions - Group Stage Outcomes
Here are our Euro 2024 predictions for the group stages
Will England make it through the group stages?, Will Germany use the home advantage to full effect?
Follow our progress, see how many we get right
If you want to join in let us know before the first game kick off and we can invite you to our private league
or join in with our friends at DeeperThanBlue
https://www.linkedin.com/posts/activity-7204868572995538944-qejG
https://www.selectdistinct.co.uk/2024/06/13/euro-2024-match-predictions/
#EURO2024 #Germany2024 #England #EURO2024predictions
Recently uploaded (20)
This is an exciting platform game called Geometry Dash
This is an exciting platform game called Geometry Dash
Turkey vs Georgia Tickets: Turkey's Redemption Quest in Euro 2024, A Preview
Turkey vs Georgia Tickets: Turkey's Redemption Quest in Euro 2024, A Preview
Turkey vs Georgia Prospects and Challenges in Euro Cup Germany.docx
Turkey vs Georgia Prospects and Challenges in Euro Cup Germany.docx
Kylian Mbappe Misses Euro 2024 Training Due to Sickness Bug.docx
Kylian Mbappe Misses Euro 2024 Training Due to Sickness Bug.docx
Serbia vs England Tickets: Serbia Gears Up for a Historic Campaign at UEFA Eu...
Serbia vs England Tickets: Serbia Gears Up for a Historic Campaign at UEFA Eu...
Serbia vs England Tickets: Serbia's Historic Euro 2024 Journey, A Blend of Ex...
Serbia vs England Tickets: Serbia's Historic Euro 2024 Journey, A Blend of Ex...
Serbia vs England Tickets: Serbia's Euro Cup Germany Journey and England's An...
Serbia vs England Tickets: Serbia's Euro Cup Germany Journey and England's An...
Georgia vs Portugal Historic Euro Cup 2024 Journey, Key Players, and Betting ...
Georgia vs Portugal Historic Euro Cup 2024 Journey, Key Players, and Betting ...
❽❽❻❼❼❻❻❸❾❻ Matka BOSS Result | Satta Matka Tips | Kalyan Matka 143
❽❽❻❼❼❻❻❸❾❻ Matka BOSS Result | Satta Matka Tips | Kalyan Matka 143
Olympic 2024 Esha Singh's Journey to the Olympic a Young Shooter's Rise, Chal...
Olympic 2024 Esha Singh's Journey to the Olympic a Young Shooter's Rise, Chal...
NEW FIBREGLASS PRESENTATION
- 1. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS TOTAL REFURBISHMENT OF FIBREGLASS POOL
- 2. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS During the application of the fibreglass lining several different materials are used including liquid polyester resins, fibreglass chopped strand mat. This surface forms a joint free reinforced fibreglass membrane leak proof surface that would not require any form of re finishing during a normal serviceable life span of at least 20 years
- 3. TOTAL POOL REFURBISHMENT SOLUTIONS Swimming pools in dire need of aesthetic upgrade/refurbishment One being a commercial pool and a outdoor private pool
- 4. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS Shown is extensive preparation of pool surfaces prior to new coating being applied
- 5. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS A new state of the art gel coating system is applied
- 6. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS Pool swim lines reinstated ready for final clean and fill
- 7. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS The Fibreglass/Gel coat can also be extended to encompass the pool edging and paving (after they have been refurbished) c/w anti slip coating
- 8. TOTAL SWIMMING POOL REFURBISHMENT SOLUTIONS Finished pool being filled