The document is a floor plan for proposed furniture layouts at Myntex Inc. It includes layouts for the main floor with areas labeled like board room, lounge room, and pantry/lounge. It also includes a layout for an upper floor with areas like meeting rooms, flexible work areas, and a games room. Dimensional information is provided for some furniture items. General notes indicate the drawing is a proposed layout that must be verified on site and is for furniture installation purposes only.
- The document is a set of architectural drawings for a development application for a property located at 422-426-428 Guildford Road.
- It includes drawings for the proposed site analysis, basement levels 1 and 2, ground level, and levels 1 through 3, as well as elevation drawings.
- The drawings provide dimensions, notes about design guidance and confirming dimensions, and copyright information for the architectural design firm.
Harry Sachdeva Port folio _Documentation_Design_Photoshop_ArchiCAD_Freelancin...Ar.Harry Sachdeva
This document contains architectural drawings for a proposed Indian restaurant including a 3D view, floor plan, set out plan, floor finishes plan, and lighting plan. The drawings provide dimensions and annotations to convey the layout and design of the restaurant interior, including locations of tables, equipment, finishes, and lighting fixtures. General notes indicate that all dimensions must be checked on site and drawings are not for construction until issued.
The document contains architectural drawings for a proposed Indian restaurant renovation including a 3D view, floor plan, set out plan, floor finishes plan, and lighting plan. The drawings provide details of the proposed layout, dimensions, materials and fixtures for the renovation of the 173 square meter space. Notes indicate that all dimensions must be verified on site before construction.
The document provides general notes for a construction project, including:
- Contractors must verify all dimensions in the field and notify the architect of any discrepancies before proceeding.
- Contractors are responsible for investigating field conditions and providing temporary supports/protection of existing structures as needed.
- All work must conform to local and state codes.
- Relevant dimensions for equipment installations must be verified against manufacturer drawings.
- All new wall, floor, and ceiling penetrations must be fire stopped to the required fire rating.
- Drawings not marked "Issued for Construction" shall not be used for construction purposes.
Linked In Portfolio Presentation - Residential- wspecsClaire Gudmanz
This document contains a residential portfolio for a client named Garrett that includes specifications and working drawings for various projects such as a custom home, spec home, investment properties, a custom renovation, interior design drawings, and specifications for a project named Ainsworth. The Ainsworth specifications document provides details on flooring, tiles, decking and other materials to be used for various rooms of the home including powder room, patios, and wine cellar with supplier information.
The document contains details for architectural drawings for a "bois expansion" project numbered A101 through A117. It includes the project name, number, date, author and checker for each page, as well as descriptions of 3D views and renderings contained in the drawings.
The document contains technical drawings for a bois expansion project numbered A101 through A116. It includes details like the project name, number, date, author and checker for each page. Each page contains reference drawings and 3D views of the design.
The document contains design drawings for a bois expansion project numbered A101 through A115. Each page includes the project name, number, date, author and checker. Views or drawings are numbered and dated on each sheet.
- The document is a set of architectural drawings for a development application for a property located at 422-426-428 Guildford Road.
- It includes drawings for the proposed site analysis, basement levels 1 and 2, ground level, and levels 1 through 3, as well as elevation drawings.
- The drawings provide dimensions, notes about design guidance and confirming dimensions, and copyright information for the architectural design firm.
Harry Sachdeva Port folio _Documentation_Design_Photoshop_ArchiCAD_Freelancin...Ar.Harry Sachdeva
This document contains architectural drawings for a proposed Indian restaurant including a 3D view, floor plan, set out plan, floor finishes plan, and lighting plan. The drawings provide dimensions and annotations to convey the layout and design of the restaurant interior, including locations of tables, equipment, finishes, and lighting fixtures. General notes indicate that all dimensions must be checked on site and drawings are not for construction until issued.
The document contains architectural drawings for a proposed Indian restaurant renovation including a 3D view, floor plan, set out plan, floor finishes plan, and lighting plan. The drawings provide details of the proposed layout, dimensions, materials and fixtures for the renovation of the 173 square meter space. Notes indicate that all dimensions must be verified on site before construction.
The document provides general notes for a construction project, including:
- Contractors must verify all dimensions in the field and notify the architect of any discrepancies before proceeding.
- Contractors are responsible for investigating field conditions and providing temporary supports/protection of existing structures as needed.
- All work must conform to local and state codes.
- Relevant dimensions for equipment installations must be verified against manufacturer drawings.
- All new wall, floor, and ceiling penetrations must be fire stopped to the required fire rating.
- Drawings not marked "Issued for Construction" shall not be used for construction purposes.
Linked In Portfolio Presentation - Residential- wspecsClaire Gudmanz
This document contains a residential portfolio for a client named Garrett that includes specifications and working drawings for various projects such as a custom home, spec home, investment properties, a custom renovation, interior design drawings, and specifications for a project named Ainsworth. The Ainsworth specifications document provides details on flooring, tiles, decking and other materials to be used for various rooms of the home including powder room, patios, and wine cellar with supplier information.
The document contains details for architectural drawings for a "bois expansion" project numbered A101 through A117. It includes the project name, number, date, author and checker for each page, as well as descriptions of 3D views and renderings contained in the drawings.
The document contains technical drawings for a bois expansion project numbered A101 through A116. It includes details like the project name, number, date, author and checker for each page. Each page contains reference drawings and 3D views of the design.
The document contains design drawings for a bois expansion project numbered A101 through A115. Each page includes the project name, number, date, author and checker. Views or drawings are numbered and dated on each sheet.
The document contains technical drawings for a bois expansion project numbered A101 through A116. It includes details like the project name, number, date, author and checker for each page. Each page contains reference drawings and 3D views of the design.
The document appears to be design drawings for a bois expansion project. It includes over 20 pages of drawings labeled A101 through A116 created by dessin & design zamarripa on July 15, 2017 for the bois expansion project. Each page includes title blocks with the project name and number, date, author and checker information.
This document contains plans and drawings for a proposed foul sewer system for a social housing project in East Sitra, Bahrain. It includes 4 sheets showing layout plans of the proposed sewer pipelines and manholes for Village 2. The plans indicate how the system will connect to existing deep gravity sewers and provide design details such as pipe material specifications. Accompanying notes provide information on related drawings, standards, and design/installation requirements.
Final Capstone project created by me. The drawing package is meant to summarize all the knowledge I have received in residential design and construction at the end of my school year.
This document provides design plans and specifications for an office redesign project. It includes sections on the concept, design, and image statements, problem statement, programming and schematics, hierarchy diagram, floor plan, lighting plan, power and data/voice plan, fire suppression plan, and finish package booklet. The goal is to modernize the office environment with innovative features, modest visual appeal, and consistency in colors and technology.
TechTown vision for the first-floor redesign is to create a more open, collaborative environment for entrepreneurs, along with a best-in-class conference center to serve the expanding need for sophisticated and flexible meeting space in this building.
My duties on this project include:
- Field measurements & existing condition verification.
- Project document setup.
- Construction documentation & detailing utilizing Revit.
This document outlines the requirements for applying for a basement finish building permit, including:
1. A completed permit application form, designer information, and applicable law checklist.
2. Two sets of to-scale plans showing room dimensions, uses, windows, construction details, and locations of fixtures and alarms.
3. A permit fee of $280.50 for a standard 10-day review. Additional fees may apply for new windows or doors.
4. Where work is within a condominium, authorization from the condo corporation is required.
The document contains details for a bois expansion project, including 16 drawings numbered A101 through A116 created by dessin & design zamarripa on July 15, 2017. Each drawing page contains information about the scale, project number, date, person who drew and checked the drawing, and descriptions of 3D views.
This document contains details of residential units for sale, including the unit number, type, number of beds and baths, floor area, block number, floor number, parking bay number, exclusive use area, and selling price. There are listings for 32 units of various types, including Type G (2 bed, 2 bath) and Type A1 (2 bed, 1 bath) units. For each unit, the document provides information on the section number, unit size, location within the block, floor level, assigned parking bay, and current selling price.
This document contains architectural drawings for a residential design project including a site plan, floor plan, foundation plan, and other details. The floor plan shows the layout of rooms and dimensions on the first and second floors. The foundation plan provides details for the building foundation including rebar layout and specifications for concrete mixes. Notes provide requirements for construction and inspections.
The City of Alamo Heights Community Development Services Department submitted a memorandum to the City Council regarding a Notice of Intent for the addition of Argyle Hall to the existing Argyle Club structure. The applicant seeks to add a 10,000 square foot one-story addition including a sunset terrace and garden room for hospitality venues. Interior renovations to the existing commercial building are also proposed. The property is zoned SF-A and located at 934 Patterson at the intersection with Argyle. The applicant has submitted plans to the Architectural Review Board and no fiscal impact is projected from the project.
Construction Management PowerPoint Presentation SlidesSlideTeam
This complete deck can be used to present to your team. It has PPT slides on various topics highlighting all the core areas of your business needs. This complete deck focuses on Construction Management PowerPoint Presentation Slides and has professionally designed templates with suitable visuals and appropriate content. This deck consists of total of sixty three slides. All the slides are completely customizable for your convenience. You can change the colour, text and font size of these templates. You can add or delete the content if needed. Get access to this professionally designed complete presentation by clicking the download button below. https://bit.ly/3dzMg9t
The document summarizes key details about the Park West residential condominium development located in Bonifacio Global City, Taguig. It will have 734 residential units ranging from 1-3 bedrooms and will include amenities such as an infinity pool, library, gym, and function room. Construction is scheduled to begin in Q4 2012 with completion targeted for Q4 2015. To reserve a unit, a buyer must submit a Php 25,000 dated check, signed reservation application, buyer information sheet, and valid ID copies.
The document is a site development plan for a stormwater control system at a TVET college campus. It includes:
- Proposed underground stormwater pipes and manholes to connect existing buildings and convey stormwater.
- Proposed access covers, beany blocks, and concrete works associated with the stormwater system.
- Details of proposed walkways, roadworks, and a pedestrian crossing, referring to other drawings for details.
- The plan outlines the layout of the proposed stormwater infrastructure and identifies connections to existing infrastructure to improve stormwater drainage at the campus.
Farmers Executive Fitness Wilshire Blvd LA CARichard Clark
This document provides plans and specifications for tenant improvements to convert part of the second floor of an existing building into a corporate fitness center for Farmers Insurance. The project involves remodeling approximately 3,470 square feet on the second floor with new partitions, flooring, fixtures and equipment. Drawings include floor plans, elevations, sections and details. Specifications are provided for mechanical, electrical and plumbing work. The project will add 35 new occupants to the second floor without exceeding egress requirements.
The document provides definitions and descriptions of various construction materials, methods, and equipment. It includes entries on air barrier paper, attic ventilation components, backhoes, batter boards, brick bonds and sizes, bulldozers, cladding types, concrete joints and masonry units, doors, electrical and plumbing components, framing elements, front end loaders, gypsum board, heat pumps, insulation, lintel, mortar, oriented strand board, plywood, plumbing fixtures, rebar, roof drainage systems, roofing materials and shapes, stone, vapor retarders, waterproofing, weep holes, welded wire fabric, and window types.
The document contains definitions and explanations of various terms and symbols used in engineering drawings and documents. It discusses topics such as:
- Civil drawing notes, engineering report sections, structural steel types, quality performance ratings, and document revision symbols.
- Key plans, location plans, plot plans, site plans, and symbols showing supporting and supported beams in frames.
- Welding symbols and their components such as arrow lines, reference lines, dimensions, and supplementary information.
- Procedures for document control, revision, circulation and approval.
The document serves as a reference for engineers, designers and drafters to understand terminology and notations commonly used in technical drawings and specifications.
This document provides an overview and disclaimer for a safety training presentation on the focus four hazards in the construction industry: electrical, struck-by, caught-in-between, and falls. It notes that the training is intended to raise hazard awareness and does not constitute a full compliance review. It also provides guidance on using the training materials and discusses limitations and responsibilities.
This document provides a summary of safety training for four major hazards in the construction industry: electrical, struck-by, caught-in-between, and falls. It outlines the primary causes of injuries and fatalities for each hazard, and discusses regulatory requirements and best practices for improving safety in these areas through proper training, use of protective equipment, and hazard prevention methods.
This document is a checklist for fall protection requirements. It contains 11 questions regarding training, equipment, and procedures to prevent falls from heights. Requirements include training employees in fall hazards and protection systems, following manufacturer recommendations for equipment, inspecting equipment daily, using ropes and harnesses made of synthetic fibers, attaching each employee to a separate lifeline, ensuring anchorages can support at least 5,000 pounds, and providing fall protection for any falls over 6 feet. The purpose is to verify fall protection plans and equipment meet safety standards to prevent injuries from falls.
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.
This document provides an overview of the Candy Construction Estimating and Valuations software. It outlines how to download and install the software, create a new company and job, recover demo jobs, and register the system. It also describes the Candy user interface, including navigation between documents and jobs, customization options, and keyboard shortcuts. The document covers importing a bill of quantities, pricing items, using worksheets and masters, resource analysis, and valuation functions within the Candy software.
The document contains technical drawings for a bois expansion project numbered A101 through A116. It includes details like the project name, number, date, author and checker for each page. Each page contains reference drawings and 3D views of the design.
The document appears to be design drawings for a bois expansion project. It includes over 20 pages of drawings labeled A101 through A116 created by dessin & design zamarripa on July 15, 2017 for the bois expansion project. Each page includes title blocks with the project name and number, date, author and checker information.
This document contains plans and drawings for a proposed foul sewer system for a social housing project in East Sitra, Bahrain. It includes 4 sheets showing layout plans of the proposed sewer pipelines and manholes for Village 2. The plans indicate how the system will connect to existing deep gravity sewers and provide design details such as pipe material specifications. Accompanying notes provide information on related drawings, standards, and design/installation requirements.
Final Capstone project created by me. The drawing package is meant to summarize all the knowledge I have received in residential design and construction at the end of my school year.
This document provides design plans and specifications for an office redesign project. It includes sections on the concept, design, and image statements, problem statement, programming and schematics, hierarchy diagram, floor plan, lighting plan, power and data/voice plan, fire suppression plan, and finish package booklet. The goal is to modernize the office environment with innovative features, modest visual appeal, and consistency in colors and technology.
TechTown vision for the first-floor redesign is to create a more open, collaborative environment for entrepreneurs, along with a best-in-class conference center to serve the expanding need for sophisticated and flexible meeting space in this building.
My duties on this project include:
- Field measurements & existing condition verification.
- Project document setup.
- Construction documentation & detailing utilizing Revit.
This document outlines the requirements for applying for a basement finish building permit, including:
1. A completed permit application form, designer information, and applicable law checklist.
2. Two sets of to-scale plans showing room dimensions, uses, windows, construction details, and locations of fixtures and alarms.
3. A permit fee of $280.50 for a standard 10-day review. Additional fees may apply for new windows or doors.
4. Where work is within a condominium, authorization from the condo corporation is required.
The document contains details for a bois expansion project, including 16 drawings numbered A101 through A116 created by dessin & design zamarripa on July 15, 2017. Each drawing page contains information about the scale, project number, date, person who drew and checked the drawing, and descriptions of 3D views.
This document contains details of residential units for sale, including the unit number, type, number of beds and baths, floor area, block number, floor number, parking bay number, exclusive use area, and selling price. There are listings for 32 units of various types, including Type G (2 bed, 2 bath) and Type A1 (2 bed, 1 bath) units. For each unit, the document provides information on the section number, unit size, location within the block, floor level, assigned parking bay, and current selling price.
This document contains architectural drawings for a residential design project including a site plan, floor plan, foundation plan, and other details. The floor plan shows the layout of rooms and dimensions on the first and second floors. The foundation plan provides details for the building foundation including rebar layout and specifications for concrete mixes. Notes provide requirements for construction and inspections.
The City of Alamo Heights Community Development Services Department submitted a memorandum to the City Council regarding a Notice of Intent for the addition of Argyle Hall to the existing Argyle Club structure. The applicant seeks to add a 10,000 square foot one-story addition including a sunset terrace and garden room for hospitality venues. Interior renovations to the existing commercial building are also proposed. The property is zoned SF-A and located at 934 Patterson at the intersection with Argyle. The applicant has submitted plans to the Architectural Review Board and no fiscal impact is projected from the project.
Construction Management PowerPoint Presentation SlidesSlideTeam
This complete deck can be used to present to your team. It has PPT slides on various topics highlighting all the core areas of your business needs. This complete deck focuses on Construction Management PowerPoint Presentation Slides and has professionally designed templates with suitable visuals and appropriate content. This deck consists of total of sixty three slides. All the slides are completely customizable for your convenience. You can change the colour, text and font size of these templates. You can add or delete the content if needed. Get access to this professionally designed complete presentation by clicking the download button below. https://bit.ly/3dzMg9t
The document summarizes key details about the Park West residential condominium development located in Bonifacio Global City, Taguig. It will have 734 residential units ranging from 1-3 bedrooms and will include amenities such as an infinity pool, library, gym, and function room. Construction is scheduled to begin in Q4 2012 with completion targeted for Q4 2015. To reserve a unit, a buyer must submit a Php 25,000 dated check, signed reservation application, buyer information sheet, and valid ID copies.
The document is a site development plan for a stormwater control system at a TVET college campus. It includes:
- Proposed underground stormwater pipes and manholes to connect existing buildings and convey stormwater.
- Proposed access covers, beany blocks, and concrete works associated with the stormwater system.
- Details of proposed walkways, roadworks, and a pedestrian crossing, referring to other drawings for details.
- The plan outlines the layout of the proposed stormwater infrastructure and identifies connections to existing infrastructure to improve stormwater drainage at the campus.
Farmers Executive Fitness Wilshire Blvd LA CARichard Clark
This document provides plans and specifications for tenant improvements to convert part of the second floor of an existing building into a corporate fitness center for Farmers Insurance. The project involves remodeling approximately 3,470 square feet on the second floor with new partitions, flooring, fixtures and equipment. Drawings include floor plans, elevations, sections and details. Specifications are provided for mechanical, electrical and plumbing work. The project will add 35 new occupants to the second floor without exceeding egress requirements.
The document provides definitions and descriptions of various construction materials, methods, and equipment. It includes entries on air barrier paper, attic ventilation components, backhoes, batter boards, brick bonds and sizes, bulldozers, cladding types, concrete joints and masonry units, doors, electrical and plumbing components, framing elements, front end loaders, gypsum board, heat pumps, insulation, lintel, mortar, oriented strand board, plywood, plumbing fixtures, rebar, roof drainage systems, roofing materials and shapes, stone, vapor retarders, waterproofing, weep holes, welded wire fabric, and window types.
The document contains definitions and explanations of various terms and symbols used in engineering drawings and documents. It discusses topics such as:
- Civil drawing notes, engineering report sections, structural steel types, quality performance ratings, and document revision symbols.
- Key plans, location plans, plot plans, site plans, and symbols showing supporting and supported beams in frames.
- Welding symbols and their components such as arrow lines, reference lines, dimensions, and supplementary information.
- Procedures for document control, revision, circulation and approval.
The document serves as a reference for engineers, designers and drafters to understand terminology and notations commonly used in technical drawings and specifications.
This document provides an overview and disclaimer for a safety training presentation on the focus four hazards in the construction industry: electrical, struck-by, caught-in-between, and falls. It notes that the training is intended to raise hazard awareness and does not constitute a full compliance review. It also provides guidance on using the training materials and discusses limitations and responsibilities.
This document provides a summary of safety training for four major hazards in the construction industry: electrical, struck-by, caught-in-between, and falls. It outlines the primary causes of injuries and fatalities for each hazard, and discusses regulatory requirements and best practices for improving safety in these areas through proper training, use of protective equipment, and hazard prevention methods.
This document is a checklist for fall protection requirements. It contains 11 questions regarding training, equipment, and procedures to prevent falls from heights. Requirements include training employees in fall hazards and protection systems, following manufacturer recommendations for equipment, inspecting equipment daily, using ropes and harnesses made of synthetic fibers, attaching each employee to a separate lifeline, ensuring anchorages can support at least 5,000 pounds, and providing fall protection for any falls over 6 feet. The purpose is to verify fall protection plans and equipment meet safety standards to prevent injuries from falls.
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.
This document provides an overview of the Candy Construction Estimating and Valuations software. It outlines how to download and install the software, create a new company and job, recover demo jobs, and register the system. It also describes the Candy user interface, including navigation between documents and jobs, customization options, and keyboard shortcuts. The document covers importing a bill of quantities, pricing items, using worksheets and masters, resource analysis, and valuation functions within the Candy software.
This document provides an overview and sample content from the OSHA Auditing: Federal Compliance Guide – Construction. Specifically, it includes:
1) An introduction explaining the general applicability checklist used to determine which rulebooks and sections apply. It includes a sample applicability checklist for the Fall Protection module.
2) A preview of some of the key features of the guide, including applicability tables, rulebooks, scoresheets, and regular updates.
3) A sample rulebook section from the Fall Protection module outlining the regulatory requirements.
4) Information on the formats and customization options available for the guide.
In summary, the document previews an OSHA compliance guide for construction
Cold weather construction provisions require maintaining certain minimum temperatures during construction and protection of masonry. Requirements are triggered when ambient temperatures or material temperatures fall below 40°F. Additional measures such as heating sand and water, using enclosures, and insulating completed masonry must be taken as temperatures decrease to ensure the masonry cures properly and achieves adequate strength.
Form scaffold-inspection-report-tube-fitting-scaffoldsCelso Carvalho
This inspection report documents the inspection of a tube and fitting scaffold against safety requirements. The report lists 22 items checked, including requirements for guardrails, ties, bracing, access, erection/dismantling safety, and compliance with scaffolding duty standards. Any issues identified require notification to the Department of Labour and correction as special duty scaffolds.
The document discusses key topics in construction law and contracting, including types of contracts, important contract clauses, bonds, subcontractor issues, and damages. It covers firm fixed price contracts, scope of work clauses, change orders, site conditions responsibility, termination notices, notice of claims provisions, arbitration, attorney's fees, liability insurance, bid and performance bonds, flow down clauses, pay when paid clauses, mechanics' liens, no damage for delay clauses, and liquidated damages. The presentation aims to provide construction law basics and contracting tips.
What are the main hazards in construction?
What are the main hazards in construction?
« Back to Table of Contents
Among the dangers in construction are:
•Falls from working at height,
•Crush injuries in excavation work,
•Slips and trips,
•Being struck by falling objects,
•Moving heavy loads,
•Bad working positions, often in confined spaces,
•Being struck or crushed by a workplace vehicle,
•Receiving injuries from hand tools,
•Inhalation of dust,
•Handling of rough materials,
•Exposure to dangerous substances (chemical and biological),
•Working near, in, or over water,
•Exposure to radiation,
•Loud noise,
•Vibration from tools or vibrating machinery.
Between 2007 and 2011 there were three critical injuries involving mobile cranes at construction sites across Ontario, according to ministry reports. Some of these incidents occurred when cranes overturned and contacted electrical conductors or when the cranes or the material that they were lifting struck or crushed workers when the load was dropped.
While most scaffold-related accidents happen due to human factors, a percentage is caused due to improper scaffold construction. Below are essential guidelines in the proper construction of scaffolding
This document provides information from the Texas Department of Insurance on excavation safety. It discusses general requirements for excavations including locating underground utilities, providing access and egress from excavations, and protecting workers from hazards. It also covers soil classification and testing methods, as well as protective systems like sloping, benching, shoring, and shielding that can be used to prevent cave-ins. The document includes an excavation safety quiz and resources for additional training documentation.
Excavation work carries several safety hazards, including collapse, falling objects or people, damage to underground utilities, and traffic accidents. The document outlines several required safety measures for excavation projects, such as totally barricading the excavation area, using safety signals, assigning a flagman to control traffic, installing benching or sloping systems, and protecting underground utilities. Proper safety equipment like ladders and certified personnel including the excavator operator, workers, and soil/electricity/gas tester are also needed.
Unit 1 the role of housekeeping in hospitality operationsNicole Hay-Walters
The document discusses the role of housekeeping in hospitality operations. It provides details on typical cleaning responsibilities of the housekeeping department, which include guest rooms, corridors, public areas, pools, offices, storage areas, linen rooms, and back-of-house areas. The document also outlines various tools used by housekeeping for planning, such as occupancy reports from the front office, and explains the executive housekeeper's role in organizing the department and basic management functions. Communication between housekeeping and other hotel departments like front office, engineering, and sales is also covered.
Mahagun Mantra | Mahagun Mantra Greater Noida West Rahul John
Mahagun Mantra one of the best residential projects in Greater Noida West. Mahagun Mantra offers 2 BHK, 3 BHK flats and luxury villas with modern amenities.
https://propshop.org.in/mahagun-mantra.php
MICHELLE SCOTT DESIGN, LLC. – Corporate IdentitiesMichelle Scott
This document contains logo designs and signage standards for the Gulf Coast Town Center project. It includes:
- Three logo design options for the project.
- Specifications for typefaces, artwork, paint colors and print graphics colors to maintain a consistent brand identity.
- Notes that all paint finishes should be low gloss and that printed colors are for reference only.
Rajgir Sports Complex_Project Kick Off Presentation.pptxsyedaliabl2023
The document provides details of the proposed construction project of a State Sports Academy and International Standard Cricket Stadium in Rajgir, Bihar. Some key details include:
- The project cost is estimated at Rs. 740.82 crores and will be completed within 24 months.
- The complex will include 6 sports halls, academic blocks, hostel buildings, residential buildings, a cricket stadium with 38900 capacity and facilities for football and hockey.
- The document outlines the commercial terms, site location, master plan, and provides approximate quantities of major construction items. It also lists the major equipment required and provides project brief, timelines, and completion details.
The document is a mechanical engineering portfolio that includes projects and services from Angga Surya Anggana. It includes summaries and drawings of projects such as developing new equipment, renewing and localizing existing equipment, and reverse engineering equipment to create new drawings when the originals are unavailable. The portfolio showcases Angga's skills in areas like mechanical design, analysis, prototyping, and working with vendors.
This document is a set of erection drawings from EFCO Corp. for the West LRT Sunalta Station project. It includes over 30 sheets detailing the layout, dimensions, and assembly of formwork and shoring equipment. A cover letter provides contact information for the EFCO project team, notes on following pour pressure limits, and returning any leased equipment.
- The document asserts copyright and design rights over the work and reserves all rights, requiring written approval for any use.
- It provides dimensions, materials, and notes for a waiter station project, including expanded mesh framing, MDF shelves and dividers, blackened steel and fabric finishes, and details on drawers, cable management, and joints.
- Revision and approval information is included, as well as section views and details.
This document is a sign design proposal for St. Vincent Charity Medical Center located at 2351 East 22nd St. in Cleveland, Ohio. It includes specifications for internally illuminated channel letters and a logo to be mounted on the wall. Dimensions and locations of the existing building and proposed sign are provided. The sign will be made of aluminum, with plexiglass faces in various colors and returns to match the brick color. It is intended to be installed according to electrical code and wired to a standard 120V/20A circuit. Approval signatures are required to confirm specifications meet customer and landlord requirements.
This document contains architectural drawings and plans for different levels of a proposed Siemens office building in Masdar City, Abu Dhabi. The drawings include floor plans showing the layouts and dimensions of rooms, common areas, mechanical areas and other building infrastructure. Dimensions, room labels and height information are provided on the drawings. Additional information includes areas of leasable and common spaces, drawing titles, scales, dates and revision details.
This document contains plans and specifications for a Dicksmith store renovation project. It includes a cover page, drawing list, feasibility plan, floor plan, and notes. The feasibility plan provides fixture layout and quantities. The floor plan shows the proposed flooring materials for each area. Notes provide instructions and requirements for the project.
This document contains floor plans and details for renovations to a home located at 537 Lisbon St in San Francisco. The renovations include removing an enclosed rear porch, removing walls to add closet space, removing an enclosed front porch, removing a recording studio in the basement and refinishing the basement, adding walls, and replacing all windows. The project will also involve reroofing and plumbing work such as replacing the water heater.
The document includes drawings and details for the interior design of a proposed Madura Fashion & Lifestyle store located in Banjara Hills, Hyderabad. It provides a schedule of drawings, floor plans showing furniture layout and markings, and details for specific elements like trial rooms, counters, and partitions. The drawings were prepared by Design Forum for their client Madura Fashion & Lifestyle and are titled "First Set Drawings".
1. The document is a construction contract proposal for civil works on a project called "Big Southern" which includes an IT building in Bangalore.
2. The scope of work involves all civil works including concreting, reinforcement, formwork, masonry works and MEP works. An item rate contract is proposed for civil works while a lump sum contract is proposed for MEP works.
3. The document provides details on the tendering process including the notice inviting tender, specifications for concreting works, samples of relevant bills of quantities, and special conditions of the contract.
This document contains floor plans and details for the office improvement of Unit 3102 at the 31st floor of Alveo Financial Tower in Makati City, Philippines. It includes a floor plan layout with room dimensions, material specifications, and plumbing, electrical, mechanical, and architectural details. The plans were prepared by an architect and engineering firm for the owner, Mr. Ichiro Chujo.
Bim course in coimbatore, cadd centre coimbatorecaddcbe1
Explore the dynamic world of Building Information Modeling (BIM) at CADD Centre Coimbatore, your gateway to cutting-edge design and construction technology. Our BIM course is meticulously crafted to equip you with the skills demanded by the industry. Learn from industry experts and master BIM tools to enhance collaboration, improve efficiency, and optimize project outcomes. CADD Centre Coimbatore provides a hands-on learning experience, ensuring you gain practical insights into 3D modeling, clash detection, and project coordination. Elevate your career prospects with BIM proficiency and unlock opportunities in architecture, engineering, and construction. Enroll now at CADD Centre Coimbatore for a transformative learning journey in BIM.
This document provides a cost summary for the construction of a 2-storey luxury residence. It lists 23 trades involved in the project and provides quantities, rates, and total costs for each trade. The total projected cost is $2,109,486. Key trades include concrete at $177,610, brickwork/blockwork at $188,090, carpentry at $144,520 and joinery at $99,800. The summary also notes exclusions such as contingency, escalation costs and GST.
Bim course in coimbatore, bim training in coimbatorecaddcbe1
Explore the dynamic world of Building Information Modeling (BIM) at CADD Centre Coimbatore, your gateway to cutting-edge design and construction technology. Our BIM course is meticulously crafted to equip you with the skills demanded by the industry. Learn from industry experts and master BIM tools to enhance collaboration, improve efficiency, and optimize project outcomes. CADD Centre Coimbatore provides a hands-on learning experience, ensuring you gain practical insights into 3D modeling, clash detection, and project coordination. Elevate your career prospects with BIM proficiency and unlock opportunities in architecture, engineering, and construction. Enroll now at CADD Centre Coimbatore for a transformative learning journey in BIM.
This document is a set of architectural drawings for lighting layout and power distribution for Unit 3102 in the Alveo Financial Tower located in Makati City, Philippines. It includes a legend defining lighting fixtures, switches, outlets and other symbols used on the drawings. Sheet 1 shows the lighting layout for the unit. Sheet 2 shows the power and emergency lighting layout. Additional sheets provide details of emergency lighting fixtures and exit signage. The drawings are signed by the architect, designer, checker and approver with their license information.
This document contains architectural drawings for a beach house project including floor plans, elevation views, section views, and schedules. The drawings were created using Autodesk Revit and provide details on the layout and design of the two-level house, including room names and sizes, building materials, and structural elements. Contact information is listed for the designer and consultant on the project.
Similar to MYNTEX INC_Furniture LAyout_MAY16-2016 (20)
1. CORRIDOR
04
06
ELEC. RM.
GAMES RM.
07
SOUTH STAIR
08
CLOSET
UP
12
WC-F
0305
DATA CENTER
LOCKER RM.
+65mm
11
±0,00
01
LOBBY
+0,65
PT-5
COJHLC100
COJHLC300
COEL500UPH
AWRF254836
COEL500UPH
COJHLC100
COJHLC100
COJHLC100
COEL500UPHCOEL500UPH
MILLWORK TABLE
M I L L W O R K - S H EL V I N G
BOARD ROOM
PANTRY/LOUNGE
LOUNGE ROOM
MAIN FLOOR
CUSTOM-MADE TABLE78.490"
256.581"
123.529"
41.344"
80.237"
Desc.
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used without
the consent of RGO Office Products Partnership. Contact RGO Facilities
Department for information and application for consent.
This drawing is an electronic emulation of the original record drawing. Details
and dimensions are not guaranteed as accurate and complete and must be
certified on-site prior to design and construction work. This drawing is
designed for furniture installations only.
Desc.
FINAL APPROVAL:
PROPOSED FURNITURE LAYOUT
MYNTEX INC.
[Sold to, Address, Line #1]
05/17/16 Desc.
2 Date
3
Date
Date
Desc.
6
[Sold to, Address, City]
RGO OFFICE PRODUCTS
100, 229 - 33 ST. N.E.
MAIN FLOOR Desc.
[Sold to, Address, Line #2]
Date
Date
Date
Date
5
1
facilities Desc.4
CT
DATE (M/D/Y)
REVISIONS
No.
[Order entry, Dealer PO
PROJECT NUMBER:
DRAWN BY:
FILE NAME:
PROJECT:
DATE:
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
DESCRIPTION
2. +65mm
WC-F
12
UP
±0,00
01
LOBBY
BOARD ROOM
CUSTOM-MADE TABLE
41.344"
256.581"
6 Des.
Des.
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used
without the consent of RGO Office Products Partnership. Contact
RGO Facilities Department for information and application for
consent.
This drawing is an electronic emulation of the original record
drawing. Details and dimensions are not guaranteed as accurate
and complete and must be certified on-site prior to design and
construction work. This drawing is designed for furniture
[Sold to, Address, Line #2] 1
Des.4MYNTEX INC.
3
Des.
Date
2
[Sold to, Address, City]
MAIN (BOARD ROOM)
FINAL APPROVAL:
Date
Des.
RGO OFFICE PRODUCTS
100, 229 - 33 STREET. N.E.
Date
5 Date
[Sold to, Address, Line #1]
Date
Des.
05/17/16
facilities
design
Date
Date
[Order entry, Dealer
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
PROJECT:
CT
DRAWN BY:
PROJECT NUMBER:
REVISIONS
No.
DATE:
DATE (M/D/Y)
FILE NAME:
DESCRIPTION
3. +65mm
DATA CENTER
03
6
5
UP
±0,00
01
LOBBY
COJHLC100
COJHLC300
COJHLC100COJHLC100
COJHLC100
M I L L W O R K - S H EL V I N G
LOUNGE ROOM
[Sold to, Address, Line #1] 2 Date
Des.
facilities
design
Date
5
Date
FINAL APPROVAL:
Date
4
1
Date
MYNTEX INC.
Date[Sold to, Address, Line #2]
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used
without the consent of RGO Office Products Partnership. Contact
RGO Facilities Department for information and application for
consent.
This drawing is an electronic emulation of the original record
drawing. Details and dimensions are not guaranteed as accurate
and complete and must be certified on-site prior to design and
construction work. This drawing is designed for furniture
6
05/17/16
Des.
MAIN (LOUNGE ROOM)
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
Des.
Des.
Des.
3
[Order entry, Dealer
Des.
Date
RGO OFFICE PRODUCTS
100, 229 - 33 STREET. N.E. [Sold to, Address, City] DATE (M/D/Y)
PROJECT NUMBER:DATE:
PROJECT:
REVISIONSCT
No.DRAWN BY: DESCRIPTION
FILE NAME:
4. 04
CORRIDOR
LOCKER RM.
11
+0,65
08
SOUTH STAIR
AWRF254836
COEL500UPHCOEL500UPH COEL500UPHCOEL500UPH
MILLWORK TABLE
PANTRY/LOUNGE
123.529"
78.490"
80.237"
5
Date
Des.
4
FINAL APPROVAL:
Date
[Sold to, Address, City]
Date
Des.
MYNTEX INC_MAY10-2016_For RENDER.cmdrw 3
facilities
design
[Sold to, Address, Line #2] 05/17/16
2
Des.
MAIN (PANTRY/LOUNGE)
RGO OFFICE PRODUCTS
100, 229 - 33 STREET. N.E.
Des.
[Sold to, Address, Line #1]
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used
without the consent of RGO Office Products Partnership. Contact
RGO Facilities Department for information and application for
consent.
This drawing is an electronic emulation of the original record
drawing. Details and dimensions are not guaranteed as accurate
and complete and must be certified on-site prior to design and
construction work. This drawing is designed for furniture
Des.
Date
6
1
Date
Des. Date
PANTRY/LOUNGE
[Order entry, Dealer
MYNTEX INC.
Date
FILE NAME:
DATE:
CT
No.
PROJECT NUMBER:
PROJECT:
DATE (M/D/Y)
REVISIONS
DRAWN BY: DESCRIPTION
5. NORTH STAIR
SOUTH STAIR
08
ESPRESSO BAR
16
600GAMES RM.
07
14
- ALIGN w/ SLAB EDGE IN BOTH DIRECTIONS
CARPET GRID STARTING POINT
VGC
UP
LANDING
15
UP
300
PT-5
VGC
BTC
28001U COMFLA3
1404M
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
1404M1404M
FPAEC2BIVI
1404M 1404M1404M
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
1404M
FPAEC2BIVI
FPAEC2BIVI
BTC
28001U
FPAEC2BIVI
1404M
TSAEGROM
MEETING RM - 20
FLEXIBLE WORK AREA
WRITABLEWALL
WORKING BAR - 23
COLAB AREA-22
WRITABLECLEARGLASS
FIREPLACE
LOUNGE ROOM - 16
WALL-MOUNTTV
WALL-MOUNTTV(DIRTWALL)
MEETING RM - 21
FILING / STOFILING / STO
40.000" 48.000"
49.642"
29.992"
74.239"
96"
29.992"
FINAL APPROVAL:
[Sold to, Address, Line #1]
Date
Date
Date
2
Desc.
Desc.
6
5
3
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used without
the consent of RGO Office Products Partnership. Contact RGO Facilities
Department for information and application for consent.
This drawing is an electronic emulation of the original record drawing. Details
and dimensions are not guaranteed as accurate and complete and must be
certified on-site prior to design and construction work. This drawing is
designed for furniture installations only.
Desc.
Date
4
Desc.
PROPOSED FURNITURE LAYOUT
Desc.
MYNTEX INC.
1
UPPER FLOOR
Desc.
Date
[Sold to, Address, City]
facilities
[Sold to, Address, Line #2]
Date
RGO OFFICE PRODUCTS
100, 229 - 33 ST. N.E.
05/17/16
Date
DRAWN BY: DESCRIPTION
FILE NAME:
PROJECT NUMBER:
DATE (M/D/Y)
REVISIONS
DATE:
CT
No.
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
[Order entry, Dealer PO
PROJECT:
6. NORTH STAI
SOUTH STAIR
08
ESPRESSO BAR
16
600
GAMES RM.
07
14
- ALIGN w/ SLAB EDGE IN BOTH DIRECTIO
CARPET GRID STARTIN
VGC
LANDING
15
300
VGC
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
1404M
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
1404M
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
TSAEGROM
MEETING RM - 20
FLEXIBLE WORK AREA
COLAB AREA-22
WALL-MOUNTTV(DIRTWALL)
FILING / STO FILING / STO
29.992"
49.642"
29.992"
74.239"
96" 48.000"40.000"
[Sold to, Address, City]
[Sold to, Address, Line #2]
3
Date
Desc.
FINAL APPROVAL:
1
6 GENERAL NOTES:
This drawing is the property of and may not be reproduced or used without
the consent of RGO Office Products Partnership. Contact RGO Facilities
Department for information and application for consent.
This drawing is an electronic emulation of the original record drawing. Details
and dimensions are not guaranteed as accurate and complete and must be
certified on-site prior to design and construction work. This drawing is
designed for furniture installations only.
Desc.
Date
Date
Desc.
MYNTEX INC.
Date[Sold to, Address, Line #1] 2
Date
Desc.
RGO OFFICE PRODUCTS
100, 229 - 33 ST. N.E.
PROPOSED FURNITURE LAYOUT 5
facilities
05/17/16
FLEXIBLE WORK AREA Desc.
4
Date
Desc.
Date
No.
FILE NAME:
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
CT
DATE (M/D/Y)DRAWN BY:
PROJECT NUMBER:
PROJECT:
REVISIONS
DESCRIPTION
DATE:
[Order entry, Dealer PO
7. SOUTH STAIR
08
ESPRESSO BAR
16
600
GAMES RM.
07
- ALIGN w/ SLAB EDGE IN B
CARPET
VGC
LANDING
15
300
VGC
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVIFPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
FPAEC2BIVI
TSAEGROM
MEETING RM - 20
FLEXIBLE WORK AREA
COLAB AREA-22
WALL-MOUNTTV(DIRTWALL)
FILING / STO FILING / STO
40.000"
49.642"
29.992"
74.239"
96"
48.000"
29.992"
Date
6
Date
Desc.
Date
Date
4MYNTEX INC.
[Sold to, Address, Line #1]
Desc.
PROPOSED FURNITURE LAYOUT
facilities
05/17/16
FINAL APPROVAL:
Desc.
3
Desc.1
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used without
the consent of RGO Office Products Partnership. Contact RGO Facilities
Department for information and application for consent.
This drawing is an electronic emulation of the original record drawing. Details
and dimensions are not guaranteed as accurate and complete and must be
certified on-site prior to design and construction work. This drawing is
designed for furniture installations only.
2
Desc.
Date
5
Date
[Sold to, Address, Line #2]
Date
[Sold to, Address, City]
FLEXIBLE WORK AREA
RGO OFFICE PRODUCTS
100, 229 - 33 ST. N.E.
Desc.
DATE:
No.
CT
DATE (M/D/Y)
[Order entry, Dealer PO
PROJECT:
REVISIONS
DRAWN BY:
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
DESCRIPTION
PROJECT NUMBER:
FILE NAME:
8. 600
300
COMFLA3
BTC
28001U
MEETING RM - 20
WALL-MOUNTTV(DIRTWALL)
WRITABLEWALL
WALL-MOUNTTV
49.642"
VGC
COMFLA3
BTC
28001U
WRITABLECLEARGLASS
WRITABLEWALL
MEETING RM - 21
WALL-MOUNTTV
74.239"
[Sold to, Address, Line #1]
Date
Date
[Order entry, Dealer
3 Des.
facilities
design
Date
[Sold to, Address, City]
4
MEETING RM - 20
2
Date
MEETING RM - 21
05/17/16[Sold to, Address, Line #2]
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used
without the consent of RGO Office Products Partnership. Contact
RGO Facilities Department for information and application for
consent.
This drawing is an electronic emulation of the original record
drawing. Details and dimensions are not guaranteed as accurate
and complete and must be certified on-site prior to design and
construction work. This drawing is designed for furniture
Des.
6
Des.
5
1
Des.
MYNTEX INC.
RGO OFFICE PRODUCTS
100, 229 - 33 STREET. N.E.
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
Date
Des.
Date
Date
Des.
UPPER (MEETING RM-21)
FINAL APPROVAL:
PROJECT:
PROJECT NUMBER:
DESCRIPTION
FILE NAME:
DATE (M/D/Y)DRAWN BY:
DATE:
No.
REVISIONSCT
9. SOUTH STAIR
08
600
UP
300
1404M 1404M1404M 1404M 1404M 1404M 1404M1404M
WORKING BAR - 23
WRITABLECLEARGLASS
COLAB AREA-22
48.000"40.000"
Date
MYNTEX INC.
Date
2
Date
WORKING BAR - 23
6
COLAB AREA - 22
[Sold to, Address, City]
Des.
UPPER (WORKING BAR & COLAB. AREA)
MYNTEX INC_MAY10-2016_For RENDER.cmdrw
Date
05/17/16
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used
without the consent of RGO Office Products Partnership. Contact
RGO Facilities Department for information and application for
consent.
This drawing is an electronic emulation of the original record
drawing. Details and dimensions are not guaranteed as accurate
and complete and must be certified on-site prior to design and
construction work. This drawing is designed for furniture
[Order entry, Dealer
4
[Sold to, Address, Line #1]
facilities
design
Des.RGO OFFICE PRODUCTS
100, 229 - 33 STREET. N.E.
3
Des.
5
Des.
Date
[Sold to, Address, Line #2] 1
Des.
Date
Des.
Date
FINAL APPROVAL: DATE (M/D/Y)DESCRIPTION
REVISIONS
FILE NAME:
CT
DRAWN BY:
PROJECT NUMBER:DATE:
No.
PROJECT:
10. NORTH STAIR
14
- ALIGN w/ SLAB EDGE IN BOTH DIRECTIONS
CARPET GRID STARTING POINT
UP
LANDING
15
FIREPLACE
LOUNGE ROOM - 16
UPPER (FLEXIBLE WORK AREA)
Date
4
3
Des.
Des.
Des. DateRGO OFFICE PRODUCTS
100, 229 - 33 STREET. N.E.
[Sold to, Address, Line #2]
facilities
design
[Sold to, Address, City]
[Sold to, Address, Line #1]
Date
Des. DateMYNTEX INC_MAY10-2016_For RENDER.cmdrw
Des.
GENERAL NOTES:
This drawing is the property of and may not be reproduced or used
without the consent of RGO Office Products Partnership. Contact
RGO Facilities Department for information and application for
consent.
This drawing is an electronic emulation of the original record
drawing. Details and dimensions are not guaranteed as accurate
and complete and must be certified on-site prior to design and
construction work. This drawing is designed for furniture
Date
2
Date
MYNTEX INC.
FINAL APPROVAL:
6
5
[Order entry, Dealer05/17/16 1
DateDes.
DRAWN BY: DESCRIPTION
CT REVISIONS
DATE (M/D/Y)No.
PROJECT:
FILE NAME:
DATE: PROJECT NUMBER: