Between 2007 and 2011 there were three critical injuries involving mobile cranes at construction sites across Ontario, according to ministry reports. Some of these incidents occurred when cranes overturned and contacted electrical conductors or when the cranes or the material that they were lifting struck or crushed workers when the load was dropped.
While most scaffold-related accidents happen due to human factors, a percentage is caused due to improper scaffold construction. Below are essential guidelines in the proper construction of scaffolding
Every year people are killed or seriously injured by collapses and falling materials while working in excavations. They are at risk from:
Excavations collapsing and burying or injuring people working in them;
material falling from the sides into any excavation; and
people or plant falling into excavations.
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
While most scaffold-related accidents happen due to human factors, a percentage is caused due to improper scaffold construction. Below are essential guidelines in the proper construction of scaffolding
Every year people are killed or seriously injured by collapses and falling materials while working in excavations. They are at risk from:
Excavations collapsing and burying or injuring people working in them;
material falling from the sides into any excavation; and
people or plant falling into excavations.
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
8 Lifting Operations with mobile crane Risk Assessment Templates
Crane checks on arrival to site
PRIOR TO USE
Access of crane to work areas
Siting and setting up of crane
Lifting of equipment and material
(Mobile crane Operator)
Crane supervision
Crane Maintenance
(revised 06-06-2018)
Lifting operation, as a huge and complicated systems engineering, involves every aspects of enterprise production. This paper will briefly introduce some common problems and control procedures during operation for occupational safety and health .
Project Information
Project Name: Tiara Hotel Auxiliary Crane No: 4/3.06/1
Location: Level 3 Date :
3rd Party Inspection of Auxiliary crane valid till: 26 August 2018 3rd Party certificate of operator valid till:
Shift: (This checklist to be completed for both Shifts)
Sr. Description S
(Satisfactory) D
(Deficiency) N/A Comments
1. Availability of Operators Manual and load chart
2. Maintenance Records
3. Operator Competency
4. Rigger Competency
5. Auxiliary Crane Section Condition
6. Structural Welds Physical Condition
7. Tie Bars and Pins
8. Foundation/Ballast
9. Earthing Condition
10. Hoist limits and breaks functioning
11. Slewing Gear
12. Drum and Wire Rope
13. Hook and Safety Latches
14. Main/luffing boom
15. Counter Jib
16. Counter weight secured
17. Pin and Bolts
18. Rope Sheaves
19. Safe Load Indicator
20. Radius Angle Indicator
21. Overload Cut-off device
22. Limit switches
23. Foundation bolts/ anchors
24. Effective means of communication
25. Fire extinguisher
26. Anti-collision system working
27. Valid Third Party Test and Inspection Certificates
28. Others ( Specify)
Remarks:
This checklist to be completed for both Shifts
Operator Name: Signature:
Reviewed By HSE Manager / In charge : Signature:
Noted by Project Leader Signature:
What are the main hazards in construction?
What are the main hazards in construction?
« Back to Table of Contents
Among the dangers in construction are:
•Falls from working at height,
•Crush injuries in excavation work,
•Slips and trips,
•Being struck by falling objects,
•Moving heavy loads,
•Bad working positions, often in confined spaces,
•Being struck or crushed by a workplace vehicle,
•Receiving injuries from hand tools,
•Inhalation of dust,
•Handling of rough materials,
•Exposure to dangerous substances (chemical and biological),
•Working near, in, or over water,
•Exposure to radiation,
•Loud noise,
•Vibration from tools or vibrating machinery.
8 Lifting Operations with mobile crane Risk Assessment Templates
Crane checks on arrival to site
PRIOR TO USE
Access of crane to work areas
Siting and setting up of crane
Lifting of equipment and material
(Mobile crane Operator)
Crane supervision
Crane Maintenance
(revised 06-06-2018)
Lifting operation, as a huge and complicated systems engineering, involves every aspects of enterprise production. This paper will briefly introduce some common problems and control procedures during operation for occupational safety and health .
Project Information
Project Name: Tiara Hotel Auxiliary Crane No: 4/3.06/1
Location: Level 3 Date :
3rd Party Inspection of Auxiliary crane valid till: 26 August 2018 3rd Party certificate of operator valid till:
Shift: (This checklist to be completed for both Shifts)
Sr. Description S
(Satisfactory) D
(Deficiency) N/A Comments
1. Availability of Operators Manual and load chart
2. Maintenance Records
3. Operator Competency
4. Rigger Competency
5. Auxiliary Crane Section Condition
6. Structural Welds Physical Condition
7. Tie Bars and Pins
8. Foundation/Ballast
9. Earthing Condition
10. Hoist limits and breaks functioning
11. Slewing Gear
12. Drum and Wire Rope
13. Hook and Safety Latches
14. Main/luffing boom
15. Counter Jib
16. Counter weight secured
17. Pin and Bolts
18. Rope Sheaves
19. Safe Load Indicator
20. Radius Angle Indicator
21. Overload Cut-off device
22. Limit switches
23. Foundation bolts/ anchors
24. Effective means of communication
25. Fire extinguisher
26. Anti-collision system working
27. Valid Third Party Test and Inspection Certificates
28. Others ( Specify)
Remarks:
This checklist to be completed for both Shifts
Operator Name: Signature:
Reviewed By HSE Manager / In charge : Signature:
Noted by Project Leader Signature:
What are the main hazards in construction?
What are the main hazards in construction?
« Back to Table of Contents
Among the dangers in construction are:
•Falls from working at height,
•Crush injuries in excavation work,
•Slips and trips,
•Being struck by falling objects,
•Moving heavy loads,
•Bad working positions, often in confined spaces,
•Being struck or crushed by a workplace vehicle,
•Receiving injuries from hand tools,
•Inhalation of dust,
•Handling of rough materials,
•Exposure to dangerous substances (chemical and biological),
•Working near, in, or over water,
•Exposure to radiation,
•Loud noise,
•Vibration from tools or vibrating machinery.
We supply overhead crane,gantry crane,jib crane,crane parts,port crane,electric hoist! Our cost performance is high,the quotation and the transportation way,belive that will make you satisfied. Welcom to inquiry!
skype:
cherry.swallow
Email:
christine@ytcrane.com
Web:
http://www.ytcrane.com