Recreational Facilities and Amenities
–Events Area
•Enclosed clubhouse and poolside area for Events and Functions
•Entertainment / Conference Room
–Kids Area
•Three (3) Kiddie pools
•Open playfield
–Adults Area
•Three (3) Adult Swimming Pools
•Meditation Area
–Family Area
•Themed Gardens
•Picnic Area
–Sports and Recreation
•Basketball Court
•Badminton Courts
•Jogging Trail
Recreational Facilities and Amenities
–Events Area
•Enclosed clubhouse and poolside area for Events and Functions
•Entertainment / Conference Room
–Kids Area
•Three (3) Kiddie pools
•Open playfield
–Adults Area
•Three (3) Adult Swimming Pools
•Meditation Area
–Family Area
•Themed Gardens
•Picnic Area
–Sports and Recreation
•Basketball Court
•Badminton Courts
•Jogging Trail
http://laisendra.com/sm-residences/field-residences/
Field Residences has been developed with generous open spaces complemented with a vast offering of amenities for families to enjoy.
Field Residences, brings in both value and a high standard of living with its themed gardens, a large selection of sports facilities, and its own clubhouse among its many features. Families also enjoy the conveniences of living next to SM City Sucat. And because it is in Parañaque, the airport is in close vicinity.
With the elements of convenience and space composing a well-balanced lifestyle, experience an urban sanctuary at Field Residences.
For Scheduled Presentation:
Contact:
Cyrus Valencia
PRC Licensed 0020140
(+63) 935-617-5070
cyruslvalencia@yahoo.com
www.laisendra.com
http://laisendra.com/sm-residences/field-residences/
Field Residences has been developed with generous open spaces complemented with a vast offering of amenities for families to enjoy.
Field Residences, brings in both value and a high standard of living with its themed gardens, a large selection of sports facilities, and its own clubhouse among its many features. Families also enjoy the conveniences of living next to SM City Sucat. And because it is in Parañaque, the airport is in close vicinity.
With the elements of convenience and space composing a well-balanced lifestyle, experience an urban sanctuary at Field Residences.
For Scheduled Presentation:
Contact:
Cyrus Valencia
PRC Licensed 0020140
(+63) 935-617-5070
cyruslvalencia@yahoo.com
www.laisendra.com
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Quality defects in TMT Bars, Possible causes and Potential Solutions.
LINKS CAFE - Online publishing version
1. Project :
Project Number :
Project Issue Date :
Drawings Statues :
documents type includes :
Project Owner :
Location :
documents Approvals
Project Engineer Date
Deputy Director Date
Director Date
Project Manager Date
Project use :
Links Cafe
S-03
30-Apr-2024
to be confirmed
-Interior Design
-Working Drawings
C.L.C.
Damietta Gov.- New
Damietta-District
5-Avenue 29-Nagar
St.-29/39
Designed
By
:
Mohannad
Rabea
A.Ullah
Drawn
By
:
Mohannad
Rabea
A.Ullah
Entertainment
Cafe Lab Collaboration
2. Notes
Date : 02/06/24
Designed By :
Designer
Project : Links Cafe
Project Number : S-03
Sheet No :
A-01.1
Owner : C.L.C.
Drawn By :
Mohannad Rabea
A.Ullah
A. Cover & Info.
01. Info. 2
B. Design Package
00. Cover 1
01. 3D 4
02. Plan 1
03. 3D details 5
C. Technical Package
00. Cover 1
01. Plans 8
02. Elevations 5
03. Sections 5
04. Doors & Windows 2
05.Detail 5
06 .Ceiling Details 6
07. Furniture details 17
3. Sheets numbering system
General sheets
P-03.1
Package Code Sheet. NO
Sheet. Series
Notes
Date : 02/06/24
Designed By :
Mohannad Rabea
A.Ullah
Project : Links Cafe
Project Number : S-03
Sheet No :
A-01.2
Owner : C.L.C.
Drawn By :
Mohannad Rabea
A.Ullah
City : New Damietta
Address: District 5-Avenue 29-Nagar St.-29/39
Mohannad Rabea A.Ullah
Designed & Drawn By :
Year : Building No :
2024
Project Type :
Project status : Project Area :
260m2
to be confirmed
cafe
29/39
Revit 2024
Software used :
Project target :
Interior Design
4. Notes
Date : 02/06/24
Designed By :
Mohannad Rabea
A.Ullah
Project : Links Cafe
Project Number : S-03
Sheet No :
B-00
Owner : C.L.C.
Drawn By :
Mohannad Rabea
A.Ullah
00. Cover
B-00 Design Package Cover
01. 3D
B-01.1 3D plan
B-01.2 3D plan
B-01.3 3D plan
B-01.4 Perspective View
02. Plan
B-02.1 plan
03. 3D details
B-03.1 3D s zone
B-03.2 3D back Sofa zone
B-03.3 bar zone
B-03.4 3D restrooms
B-03.5 3D Ceiling
9. Social Zone
Catering
Restroom
Store room
kitchen
Soft Seats Soft Seats
pastry & bakery
Entrance zone
Dinning Area
Catering Service
Notes :-
Scale : 1 : 50
Date : 01/02/24
No : B-02.1
Sheet : plan
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
15. 1
View Name
Sheet Number
1t
1i
1
A101
Section Name
1t
TD1
1i
1t
1t
1t
M1M
Elevation
Section
Door Tag
Spot Level
Lighting Tag
Curtain wall Tag
Hidden Lighting Tag
Furniture Tag
Window Tag
Air Terminal Tag
Type mark
supply
direction
return
direction
Both
direction
Type mark
Type mark
Lighting mark
Lighting mark
Lighting mark
Level Elevation
Lighting mark
Detail No
on Sheet
Sheet No
Detail No
on Sheet
Sheet No
Notes
Date : 02/06/24
Designed By :
Mohannad Rabea
A.Ullah
Project : Links Cafe
Project Number : S-03
Sheet No :
C-00
Owner : C.L.C.
Drawn By :
Mohannad Rabea
A.Ullah
Technical Package Index
Sheet
Number Sheet Name Scale
00. Cover
C-00 Technical Package Cover
01. Plans
C-01.1 As built 1 :50
C-01.2 Demolition 1 :50
C-01.3 Plan 1 :50
C-01.4 Plan - Service zone 1 :25
C-01.6 Reflected Ceiling Plan 1 :50
C-01.7 Flooring Plan 1 :50
C-01.D1 Materials & Keys for Flooring -
C-01.D2 Materials & Keys for Reflected
Ceiling Plan
-
02. Elevations
C-02.01 Elevations 1-A & 1-C 1 :35
C-02.02 Elevations 1-B & 1-D 1 :35
C-02.03 Elevations 2-A & 2-C 1 :35
C-02.04 Elevations 2-B & 2-D 1 :35
C-02.D1 Materials & Keys for Elevations -
03. Sections
C-03.1 Section A-A & Section B-B 1 :30
C-03.2 Section C-C 7 & Section D-D 1 :30
C-03.3 Section E-E 7 & Section F-F 1 :30
C-03.4 Section G-G 7 & Section H-H 1 :20
C-03.D1 Materials & Keys for Sections -
04. Doors & Windows
C-04.1 Curtain wall windows 1 :20
C-04.2 Doors and windows 1 :20
05.Detail
C-05.1 Stickers 1 :10
C-05.2 Stickers 1 :15
C-05.3 Recessed part 1 :10
C-05.4 Skeleton for Deconstructivism wall
detail
1 :15
C-05.5 WC Details 1 :10, 1 :5
06 .Ceiling Details
C-06.1 Rigging points 1 :50
C-06.2 Wall support height 1 :50
C-06.3 upper bar ceiling - Main points
support
1 :50
C-06.4 upper ceiling bar - inner sector 1 :15
C-06.5 Ceiling Details 1 :5
C-06.6 Linear Lighting Integration Ceiling
Plan
1 :50
07. Furniture details
C-07.1 Furniture Marking plan 1 :50
C-07.2 bar 1 :20
C-07.2-1 Bar - B1 -1 1 :20
Technical Package Index
Sheet
Number Sheet Name Scale
C-07.2-2 Bar - B1 -2 1 :10, 1 :5
C-07.2-3 Bar - B2 1 :20
C-07.3 The Wing Armchair 1 :5
C-07.4 flower pots wall 1 :20
C-07.5 Sink Mirror 1 :10, 1 :5
C-07.6 Wall Mirror 1 :10
C-07.7 Fixed Flower box 1 :25
C-07.8 Deconstructivism Sofa 1 :10
C-07.9 Deconstructivism Sofa Left corner 1 :20
C-07.10 Deconstructivism Sofa Right
corner
1 :20
C-07.11 Social zone seats 1 :15
C-07.12 Main Table 1 :5
C-07.13 Low Table 1 :10
C-07.D1 Furniture Materials -
SYMBOLS LEGEND
General notes
Abbreviation index
1. These drawings are revit files. Should not be altered by any
softwares without prior notice
2. All levels are in meters
3. All dimensions used to be verified on site. Any discrepancies should
be notified
4. All work is to be completed in strict accordance with all applicable
codes, ordinances and Regulations.
5. Prior to beginning work in any area, all existing conditions and
dimensions are to be verifiedi n field. Any discrepancies between the
architectural drawings and specifications and Existing conditions are
to be reported to the architect prior to proceeding with the work.
6. All existing elements are to be protected from damage during
construction. Any damage is To be repaired or replaced by the
responsible trade at their own expense.
7. Contractor to indentify all utility locations prior to beginning work.
8. Contractor shall seal all penetrations in exterior wall and roof
assemblies with appropriate joint sealant(s) and flashing(s) to
maintain a weathertight and airtight Building envelope. All joints and
penetrations shall be sealed, gasketed, or weather-stripped to
minimize air leakage, including the following:
A. Joints around fenestration and door frames.
B. Junctions between walls and foundations, between walls at
building corners, between walls and floors or roofs, and
between walls and roof or wall panels.
C. Openings at penetrations of utility services through roofs,
walls, and floors.
D. Joints, seams, and penetrations of vapor retarders.
E. All other openings in the building envelope
9. The letters I, o, and q are not used to indicate sections or Elevations.
10.
11. All sleeves, openings, etc. For conduit, pipes, ducts, etc. (outside of
rated chases) through floor slabs, smoke Partitions and rated
partitions are to be fire sealed in Accordance with fire rated
assembly designs, applicable Codes and fire marshall’s
requirements.
12. Refer to drawings of each trade or discipline for additional general
notes and information, including civil/site development, architectural,
structural, mechanical, Plumbing, fire protection and electrical.
13. These drawings shall not be scaled to obtain dimensions. If the
dimensions cannot be determined by the information given, the
contractor shall request clarification from The architect.
14. The list of abbreviations is shown as a guide only and does not
necessarily include all abbreviations used. Other abbreviations may
be found among the drawings.
15. Refer to this sheet for architectural abbreviations.
• ACT
• CFP
• CTB
• CT
• CONC
• EP
• EXP
• GL
• GR
• LVT
• MTL
• PEMB
• PNT
• RB
• SHT
• SS
• SSTL
ACOUSTIC CEILING PANEL
COLOR FLUORO-POLYMER
CERAMIC TILE BASE
CERAMIC TILE
CONCRETE
EPOXY
EXPOSED
GLASS
GROUT
LUXURY VINYL TILE
METAL
PRE-ENGINEERED MTL BLDG
PAINT
RUBBER BASE
INTERIOR SHEATHING
SOLID SURFACE STAINLESS
STEEL
16. 7
6
5
4
3
2
1
14.611
0.850 2.000
0.590
0.200 15.960
10.800
3.810
14.900 4.700
3.611
0.510
0.800
2.300
1.650
27
Notes :-
Scale : 1 : 50
Date : 01/02/24
No : C-01.1
Sheet : As built
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
1 : 50
As built
17. 2 Demolish
1 remove
3 remove
0.675
0.595
2.210
0.595
0.170
Notes :-
Scale : 1 : 50
Date : 01/02/24
No : C-01.2
Sheet : Demolition
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
Demolition
D no. note
1 Remove the door for reuse
later
2 demolish a wall
3 remove parts of the wall to
add some fixture
1 : 50
Demolition Plan
1
18. 20.000
15.010
15.960
2.728 0.475 5.973 0.475 6.033 0.275
7.170
3.640
0.410 2.880 0.350
0.416
6.605
0.395
0.290 6.018 0.475 4.651
11.434
2.668 0.468 4.658 8.166
1.374
1.674
1
.
3
0
6
0
.
6
3
8
0.395
6.600
7.615
1.374
3.221
2.863
2.588 0.275
10.980
0.410
1.440 1.575 1.235
2.400
2.000
0.126
0.810
1.464
2.356
1.591
2.051
1.043
1
.
2
2
7
0
.
4
5
6
2.400
2.500
1.160
4.250
4.816
1.868 1.983
1.040 0.828
1.680
1.340
3.020
0.958 1.035
3.020
0.420
1.260
1.340
0.379
0.810
0.152
0.379
0.810
0.152
14.610
1
Elevation 1 - A
C-02.01
2
Elevation
1
-
D
C-02.02
2
Elevation 1 - C
C-02.01
1
Elevation 2 - a
C-02.03
2 Elevation
2
-
D
C-02.04
1
Elevation
2
-
B
C-02.04
2
Elevation 2 - c
C-02.03
1
C-03.1
A
2
C-03.1
B
1
C-03.2
C
2
C-03.2
D
1
C-03.3
E
1
C-01.4
1.200
D3
D4 D4
D1
19
W1 W2 W3
1
Elevation
1
-
B
C-02.02
0.160 2.400 0.176 0.140 5.700 0.141 0.126 5.800 0.130
1
C-03.4
G
2
C-03.3
F
2
C-03.4
H
1
C-07.4
P
D2
1
C-05.4
Section 1
2
C-05.4
Section 2
Notes :-
Scale : 1 : 50
Date : 01/02/24
No : C-01.3
Sheet : Plan
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
Door Schedule
Type
Mark
Dimensions
Comments
Width Height
D1 1.950 2.125
D2 0.900 2.200
D3 0.810 2.080 Existing door
D4 0.810 2.080
all walls finsh in elevations
sheets
19. 1
C-03.1
A
2
C-03.1
B
1
C-03.2
C
2
C-03.2
D
1
C-03.3
E
1.470
4.567
1.579
1.274
3.221
2.863
2.588 0.475
1.440 1.575 1.235
2.500
2.000
0.126
0.810
1.464
2.356
1.579
2.051
1.218
2.400
2.500
1.160
4.250
4.816
1.868
1.983
1.040 0.828
1.680
1.340
3.020
0.958 1.035
3.020
0.420
1.260
1.340
0.379
0.810
0.152
0.379
0.810
0.152
1
C-03.4
G
2
C-03.3
F
2
C-03.4
H
0.400 1.791 0.400
1
C-07.4
P
D4 D4
D3
D2
Notes :-
Scale : 1 : 25
Date : 01/02/24
No : C-01.4
Sheet : Plan - Service zone
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
1 : 25
Plan - Service zone
20. H1
H1
H1 H1
H1
LW1
LW1
LW1
LW1
LW1
LW1
LW1
LW1
LW1
LW1 LW1
LW1
LW1
LW1
LW1
LW1
LW1
LW1
LW1
LC2
LC2
LC2
LB1
LB1
LB1
LB1
LB1 LB1
LC3 LC3 LC3 LC3
LB3
LB3
LB3 LB3
CW3
MM1
CSB
GB2
CW3
CW4
GB1
GB1
GB1
GB1
GB2
HL2
HL2 HL2
R1 R1 R1
R1
R1
R1
R1
R1
R1
R1
R1
R1
R1
R1 R1 R1
R1
R1
R1
R1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S2 S2
S2 S2
RS
RS
RS
RS
S2 RS
RS
RS
RS
Notes :-
Scale : 1 : 50
Date : 01/02/24
No : C-01.6
Sheet : Reflected Ceiling Plan
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
1 : 50
Reflected Ceiling Plan
Lighting Fixture Schedule
Mark Type
H1 Deconstructivism Lamp Box
LB1 slant lighting
LB3 TASK S rectangle
LC2 4 cups light
LC3 Liner wood - concrete
LW1 Wood Lamp
SL1 Light bar
All data used acorrding to mep engnineer
Air Terminal Schedule
Type
Mark Count Description
R1 20 A linear diffuser module of
dimensions A(1M) x 2 Slots , with
180° pattern controller adjustment.
Both the direction and volume of
Return air can be adjusted by
manual or digital controllers.
RS 8 Concealed Mounting A square
diffuser module of dimensions
A(.3M) with 180° pattern controller
adjustment. Combination Supply
-Return Directional Diffuser.
S1 16 A linear diffuser module of
dimensions A(1.8M) x 8 Slots , with
180° pattern controller adjustment.
Both the direction and volume of
Supply air can be adjusted by
manually or digital controllers.
S2 5 Concealed Mounting A linear diffuser
module of dimensions A(1M) x 2
Slots , with 180° pattern controller
adjustment. Both the direction and
volume of Supply air can be adjusted
by manual or digital controllers.
Ceiling Materials
Mark Name
CSB concrete slab finish
CW3 Wooden ceiling Ribs
CW4 Plain Slice Walnut
GB1 Ceiling Tiles moisture resistant
GB2 Ceiling Tiles Fire & moisture resistant
MM1 metal mesh
HL2 : hidden light for ceiling as selected samples
22. Notes :-
Scale :
Date : 01/02/24
No : C-01.D1
Sheet : Materials & Keys for Flooring
Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
Prep. by :Mohannad Rabea A.Ullah
Flooring Materials Full Data
Mark Name Area Material Description Material Image
CC1 Aurora Ivory
Porcelain
327 m² GEMMA Aurora Floor
Glazed Porcelain
MATT tiles Ivory 120x60
cm.
CC2 Romance White 56 m² GEMMA Romance Floor
tiles White 60x60 cm.
CG1 Veranda White
Gravel
0 m² GEMMA Veranda Floor
tiles White 42x42 cm.
CW2 WPC Wood(1) 27 m² WPC on grid for water
drain
GC2 Rust Green
Geometric
Luster Porcelain
17 m² GEMMA Rust Floor
Glazed Porcelain
MATT tiles Green
Geometric Luster 120x60
cm.
Flooring Materials Full Data
Mark Name Area Material Description Material Image
ST1 black sticker 2 m² self adhesive stickers for
walls strrips 5cm as
selected sample.
TC1 Threshold
Salerno
Anthracite
Geometric
1 m² GEMMA Salerno Floor
Glazed Porcelain
MATT tiles Anthracite
Geometric 80x80 cm.
WC1 WPC Wood 8 m² WPC on grid for water
drain
WC2 Marbella Ivory 12 m² GEMMA Marbella Floor
tiles Ivory 60x60 cm.
WH1 Toscana
Geometric
16 m² GEMMA Toscana Floor
Glazed Porcelain
MATT tiles Geometric
60x120 cm.
Flooring Materials Full Data
Mark Name Area Material Description Material Image
WH2 Toscana Dark
Blue
13 m² GEMMA Toscana Floor
Glazed Porcelain
MATT tiles Dark Blue
60x120 cm.
WH3 Toscana Dark
Beige
21 m² GEMMA Toscana Floor
Glazed Porcelain
MATT tiles Dark Beige
60x120 cm.
WH4 Runway Dark
Blue Stripe
9 m² GEMMA Runway Floor
Glazed Porcelain
MATT tiles Dark Blue
Stripe 60x120 cm.
WH5 Amelia
Geometric
19 m² GEMMA Amelia Floor
Glazed Porcelain
MATT tiles Geometric
60x120 cm.
23. Notes :-
Scale :
Date : 01/02/24
No : C-01.D2
Sheet : Materials & Keys for Reflected
Ceiling Plan
Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
Prep. by :Mohannad Rabea A.Ullah
Lighting Fixture Schedule full data
Mark Type Description Count Type Image
H1 Deconstruct
ivism Lamp
Box
Deconstructivism
pendant Lamp
chamfered Box
with a brass finish
as a selected
sample.
5
LB1 slant
lighting
Linear with
variable length &
depth for each
one as a selected
sample
6
LB3 TASK S
rectangle
Task s rectangle
1.2 x .2
suspended direct
soft, black, 4000 k
as a selected
sample.
4
LC2 4 cups light Linear with 4 cups
suspended on
wooden plate
3
LC3 Liner wood -
concrete
A Linear
lamp1.2m with a
wooden &
concrete textured
finish as a
selected sample.
4
Ceiling Materials Takeoff
Mark Name Description Image
CSB concrete slab finish let the concrete slab as
it is and add the effect
of the wood board if it
doesn't already exist
CW3 Wooden ceiling Ribs 2-1/4" * 1" Salts are
variable length and
assembled on a
Notched Backers
customized shape ,
Golden Maple finish as
selected sample
CW4 Plain Slice Walnut wooden panels mdf
18mm with Plain Slice
Walnut finish as
selected sample
GB1 Ceiling Tiles moisture
resistant
12.5mm moisture
resistant gypsum
board with Ventilation
Protection ceiling with
white matt emulsion
paint finish
GB2 Ceiling Tiles Fire &
moisture resistant
12.5mm Fire &
moisture resistant
gypsum board ceiling
with Gray gloss
emulsion paint finish.
MM1 metal mesh black metal mesh
panel on 5*5cm box
electrostatic paint as
selected sample
Lighting Fixture Schedule full data
Mark Type Description Count Type Image
LW1 Wood Lamp A chamfered
pyramid of
deconstruction
pendant lamp with
a wooden finish as
a selected
sample.
19
SL1 Light bar LED bar Direct
Light with Variable
Length between
wooden slots
Width 5 cm
-quantity and
length on
schedule
150
HL2 : hidden light for ceiling as selected
samples
24. G
1.200
1
5.200
ST1
CP1
ST2
3.744
2.950
0.794
1.491
0.990
0.315 4.047 0.289
1
C-05.2
PST1
1
C-05.4
Section 1
G
1.200
1
5.200
P1
WP1
2.950
0.794
3.744
0.961
0.698
3.744
CP1 CP1
2.950
0.999
P2
1
C-05.4
Section 1
Notes :-
Scale : 1 : 35
Date : 01/02/24
No : C-02.01
Sheet : Elevations 1-A & 1-C
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
1 : 35
Elevation 1 - A
1
1 : 35
Elevation 1 - C
2
Walls Material
Mark Name
CP1 painting textured concrete
CW3 Wooden ceiling Ribs
P1 Beige Paint
P2 Yellow Paint
PVC1 Orange matt Cladding
ST1 black sticker
WP1 Wooden sheild paint
WS1 Wooden skirting
26. G
1.200
1
5.200
3.744
2.950
0.900
2.245
0.599
0.923
0.900
2.245
0.599
P2 P1
W2
W3 W1
-
---
G
1.200
1
5.200
1
C-03.2
C
2
C-03.2
D
0.582
3.744
1.491
0.990
0.315 4.047 0.289
0.999
3.744
2.950
3.151
0.560
2.440
1.326
0.767
2.829
0.148
CP1 ST2
ST2
ST1
ST2
1.329
0.680
1.329
2.282
ST1
P2
PST1
1
C-05.3
2
C-05.3
Notes :-
Scale : 1 : 35
Date : 01/02/24
No : C-02.03
Sheet : Elevations 2-A & 2-C
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
1 : 35
Elevation 2 - a
1
1 : 35
Elevation 2 - c
2
Walls Material
Mark Name
CP1 painting textured concrete
CT1 Tribe white
CT2 Salmon Pastel
CT3 Etna Grey Geometric
CW3 Wooden ceiling Ribs
G1 blurred glass
P1 Beige Paint
P2 Yellow Paint
PVC1 Orange matt Cladding
SS1 black steel square tube
ST1 black sticker
ST2 orange sticker
WP1 Wooden sheild paint
WS1 Wooden skirting
27. G
1.200
1
5.200
3.745
0.599
2.245
0.900
3.744
1.402
2.342
0.108 3.257
2.950
0.794
2.950
0.582
0.961
P2 P1 CP1
P2
ST1 P2
2
C-05.4
Section 2
G
1.200
1
5.200
1
C-03.1
A
2
C-03.1
B
1
C-03.3
E
3.744
0.895
2.245
0.599
3.744
3.200
0.749
1.329
0.953
1.329
1.011
0.716
1.700
0.635
2.403 3.090 1.498
? P1 P2
PVC1
1.329
0.680
0.169 1.505
2
C-03.3
F
2
C-03.4
H
PVC1
CP1
Notes :-
Scale : 1 : 35
Date : 01/02/24
No : C-02.04
Sheet : Elevations 2-B & 2-D
Drawn By : Mohannad Rabea A.Ullah Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
1 : 35
Elevation 2 - B
1
1 : 35
Elevation 2 - D
2
Walls Material
Mark Name
CP1 painting textured concrete
CT1 Tribe white
CT2 Salmon Pastel
CT3 Etna Grey Geometric
CW3 Wooden ceiling Ribs
G1 blurred glass
P1 Beige Paint
P2 Yellow Paint
PVC1 Orange matt Cladding
SS1 black steel square tube
ST1 black sticker
ST2 orange sticker
WP1 Wooden sheild paint
WS1 Wooden skirting
28. Notes :-
Scale :
Date : 01/02/24
No : C-02.D1
Sheet : Materials & Keys for Elevations
Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
Prep. by :Mohannad Rabea A.Ullah
Wall Material Takeoff
Mark Name Description Image
CP1 painting
textured
concrete
Jazeera paints concrete effect primer as selected sample.
CT1 Tribe white GEMMA Tribe Wall tiles White 25x75 cm
CT2 Salmon
Pastel
GEMMA Pastel Wall tiles Salmon 25x75 cm
CT3 Etna Grey
Geometric
GEMMA Etna Wall tiles Grey Geometric 50x150 cm
CW3 Wooden
ceiling Ribs
2-1/4" * 1" Salts are variable length and assembled on a
Notched Backers customized shape , Golden Maple finish as
selected sample
G1 blurred
glass
Yellow blurred glass thickness 1cm as selected sample.
P1 Beige Paint Jazeera Paint Beige Sky Light OW-4802
Wall Material Takeoff
Mark Name Description Image
P2 Yellow
Paint
Jazeera Paint yellow Summer Sun YL-0058
PVC1 Orange
matt
Cladding
Orange matt PVC Wall Cladding Sheet chemical resistance
Fire rated to self extinguishing Sheet Thickness 2.5mm as
selected sample.
SS1 black steel
square
tube
black steel 1.5x1.5cm square tube electrostatic painting as
selected sample.costmuzed shape a black steel 1.5x 1.5 cm
rectangular tube electrostatic painting custom shape &
Welded as drawings
ST1 black
sticker
self adhesive stickers for walls strrips 5cm as selected
sample.
ST2 orange
sticker
orange self adhesive stickers for walls as selected sample.
WP1 Wooden
sheild paint
Block Board Wooden sheild paint as selected sample.
WS1 Wooden
skirting
Wooden skirting boards 100mm white vintage oak with
dimensions of 2400 x 14 x 100 mm. With A gap for led
profile.- as selected sample.
33. Notes :-
Scale :
Date : 01/02/24
No : C-03.D1
Sheet : Materials & Keys for Sections
Project : Links Cafe
Owner : C.L.C.
Project Number : S-03
Prep. by :Mohannad Rabea A.Ullah
Wall Material Takeoff
Mark Name Description Image
CP1 painting
textured
concrete
Jazeera paints concrete effect primer as selected sample.
CT1 Tribe white GEMMA Tribe Wall tiles White 25x75 cm
CT2 Salmon
Pastel
GEMMA Pastel Wall tiles Salmon 25x75 cm
CT3 Etna Grey
Geometric
GEMMA Etna Wall tiles Grey Geometric 50x150 cm
CW3 Wooden
ceiling Ribs
2-1/4" * 1" Salts are variable length and assembled on a
Notched Backers customized shape , Golden Maple finish as
selected sample
G1 blurred
glass
Yellow blurred glass thickness 1cm as selected sample.
P1 Beige Paint Jazeera Paint Beige Sky Light OW-4802
Wall Material Takeoff
Mark Name Description Image
P2 Yellow
Paint
Jazeera Paint yellow Summer Sun YL-0058
PVC1 Orange
matt
Cladding
Orange matt PVC Wall Cladding Sheet chemical resistance
Fire rated to self extinguishing Sheet Thickness 2.5mm as
selected sample.
SS1 black steel
square
tube
black steel 1.5x1.5cm square tube electrostatic painting as
selected sample.costmuzed shape a black steel 1.5x 1.5 cm
rectangular tube electrostatic painting custom shape &
Welded as drawings
ST1 black
sticker
self adhesive stickers for walls strrips 5cm as selected
sample.
ST2 orange
sticker
orange self adhesive stickers for walls as selected sample.
WP1 Wooden
sheild paint
Block Board Wooden sheild paint as selected sample.
WS1 Wooden
skirting
Wooden skirting boards 100mm white vintage oak with
dimensions of 2400 x 14 x 100 mm. With A gap for led
profile.- as selected sample.