1. Resume of
ALBERTO M. MAMORE
SENIOR CIVIL/STRUCTURAL ENGINEER
Email Address : AlbertoMamore@gmail.com
Telephone : 713-550-4035
SUMMARY OF EXPERIENCE
I have a 25-year career in structural engineering with about 22 years in oil and gas industry, and the rest on residential,
commercial, industrial, communication, and power plants projects (including a nuclear power plant).
I have an excellent experience particularly in refinery facilities, electrical substation buildings, and power plants. I have done
engineering design of the following items:
• Pipe supports, Pipe racks and pipe bridges;
• Modular Equipment and Piping Structures;
• Reactor and exchanger structures;
• MCC Building Foundations;
• Miscellaneous pipe and electrical supports;
• Steel stiles and Platforms;
• Concrete structures;
• Concrete foundations;
• Pile foundations;
• Lifting calculations;
• Pump and compressor foundations with and without vibration analysis;
• Heat Exchanger and Horizontal Foundations;
• Horizontal and and Vertical Vessel Foundations;
• Communication and Administration Building for Saudi Aramco;
• Electrical Substation Buildings;
• Blast-resistant “Control Room” Buildings;
• Electrical Cable Pits, trenches and duct banks;
• Road Culverts For Pipe Crossings;
• Oily and non-oily water sumps;
• Spillways;
• Pipe Stress Analysis of small-bore pipes in Guangdong Nuclear Power Plant in China.
As the Lead Civil / Structural Engineer, I have the following project duties:
• Interdisciplinary coordination and squad-checking with other disciplines;
• Plan, schedule and implement civil/ structural works;
• Report progress and status of deliverables to the Project Engineer or Manager on a weekly or as-needed basis;
• Analyze problems and provide their solutions to in engineering, design and construction of projects;
• Meet and discuss with the Client representative toward successful completion of projects;
• Prepare reports, technical queries, holds lists, engineering change notices, etc;
• Check and sign-off CSA deliverables such as drawings, calculations, material take-offs and related documents;
• Prepare Construction Scope of Work;
• Prepare CSA Specifications for Steel Design, Foundation Design, etc.;
• Develop Excel and Mathcad Calculation templates to be used by Engineers and Designers for the projects;
• Compile Lessons Learned;
• Compile Knowledge Objects like books, references, industry practices, calculation methods, templates, etc.
SOFTWARE EXPERIENCE
b6b262da-c195-4468-b2d0-71acf265b637-160715202312.doc

2. I have extensively used computer structural software such as STAAD III, STAAD Pro, STRAAD, Foundation3D, Mat3D,
SAFE, RISA-3D, Risa Foundation, and Syspipe & Supipe, Microsoft Office programs. I extensively use MathCAD and Excel
in creating and using my own programs. I am confident that I can easily adapt to other programs when necessary.
CODES AND STANDARDS EXPERIENCE
I have used various international Codes such as AISC, ACI, UBC, ASCE, ASTM, AWS, AWWA, API, EIA, (American
Codes), RCCM (French Code Rules for Construction of Nuclear Power Plants), National Structural Code of the Philippines
(NSCP), Japan Industrial Standards, and industry-accepted PIP Standards. I can easily adapt to any standards or Project
Specifications.
I worked in the Philippines for several years, about a year in China [on one nuclear power plant], five years in Saudi Arabia
[for mostly refinery projects], and more than ten years in the United States [for oil and gas projects both here and abroad].
DETAILED COMPANY EXPERIENCE
October 2005– Present (10+ years) VENTECH ENGINEERS LLC
Lead Civil/Structural Engineer Pasadena TX 77502, United States
Projects:
• Sinclair Casper Refining Co., 25,000 BPSD Crude Unit (located in Casper, Wyoming)
• GTL Joint Venture, 250 BPD GTL Plant (located in Oklahoma City, Oklahoma)
• Jabil Qiwan General Trading LLC, Bazian Refinery ((located in Iraq)
• Terra Industries, 1500 T/D UAN Facility (located in Woodward, Oklahoma)
• Mark West Energy Partners, Mark West Liberty Gas Gathering (located in Washington County, Pennsylvania)
• Amakpe, Amakpe Refinery Crude Topping Units (located in Eket, Akwa Ibom State,Nigeria)
• Pluspetrol Diesel Production Units (located in Peruvian Amazon basin, Peru)
• Kar Group, Refineries (KAR-I,KAR-II,& KAR-III), (located in Erbil, Iraq)
• Euroenergy Diesel Production Unit (located in Siberia, Russia)
• WGTL Trinidad Gas-to-Liquids Plant (located in Pointe-A-Pierre, Trinidad)
• IRL Indus Refinery (located in Karachi, Pakistan)
Note: Before I worked as a direct employee of Ventech, I worked as a contractor under International Plant Services (IPS) from
October 2005 to March 2012.
December 2002– September 2005 (approx. 3 years) Chiyoda Philippines
Senior Engineer II (Lead Engineer) Pasig City, Philippines
Projects:
• QATARGAS II Development Project (located in Ras Laffan, Qatar)
• Sakhalin Energy LNG Project (located in Sakhalin Island, Russian Federation)
• Thai Olefins Company- Cooling Tower Area Project (located in Map Tha Put,Thailand)
My main responsibilities included but not limited to: Preparation of Man-hour Estimate, Manpower Requirement, and
Schedule; Coordination between our Client, Chiyoda Corporation of Japan and my company; coordination and delegation of
work to my subordinates; checking and signing of calculations and drawings prior to submission to the Chiyoda Japan;
Monitoring and reporting of work progress and Man-hour Utilization.
February 2001– October 2002 (2+ years) FLUOR DANIEL INC., PHILIPPINES
Design Engineer Alabang, Muntinlupa City, Philippines
Projects:
• Citgo Petroleum Corp., Conversion Optimization Project (located in Lake Charles, Louisiana USA)
• BP [Amoco] Clean Fuels (located in Texas City, Texas USA)
• Hamaca Crude Upgrader Project (located in Jose, Venezuela)
2

3. Prepared engineering calculations and sketches of steel structures such as pipe supports, electrical supports, stiles and
platforms; foundations of structures and plant equipment such as pumps, exchanger and horizontal vessels, vertical vessels, and
skid-mounted electrical equipment. Followed all applicable company engineering practices, job design criteria, and
international standards for the project such as UBC 1997 for seismic analysis, ACI-95/ASCE-99 for concrete design, ASCE 7-
95/ASCE 7-98 for wind loads, and AISC 9th
Edition for steel design. Attended company trainings that have sharpened my
knowledge and skill in my work as a structural engineer. Utilized RISA-3D, RisaBase, RisaFooting, MathCAD, and other
applicable company- developed programs, aside from manual calculations.
November 1995 – December 1999 (4+ years) SAUDI ENGINEERING GROUP INTERNATIONAL
Lead Civil/Structural Engineer Al Khobar, Kingdom of Saudi Arabia
Projects:
• Saudi Aramco -- New Light Industrial Park Office Building, Dhahran (BI-3400)
• Saudi Aramco – EWO# 99-012 Underrated Switches, Replacement for JGP Sub-Station 8,12, 21, 22 & 27
• Saudi Aramco – EWO# 98-415 Sea Island #4 T&I (Repair / Replace in Kind)
• Qatar General Petroleum Corporation – Permanent Power Supply to Ras Laffan Industrial Area
• NAMA –Engineering Consultancy Services for NAMA Epoxy Resin Project
• Saudi Aramco B1-3155 Propane Pipeline between Ras Tanura Refinery and Juaymah Gas Plant
• SABIC – SABCAT1 Truck Shelters #1 and #2
• Arabian Oil Co. – Construction of Process Master Control Room (PMCR) Building (Blast-resistant Bldg., plus other
associated buildings and items)
• Saudi Aramco – B1 –3723 Shaybah Pipeline and Terminal Facilities Part B – “Pipeline” Package
• Technip – Saudi Aramco Shaybah Downstream Processing Facilities, Abqaiq (BI-3724)
• MIC Dammam – Expansion of Modern Industries Company
• Saudi Aramco – NGL Facilities, Abqaiq Refinery (BI-3137)
Prepared engineering calculations and sketches of major structures such as office building, substation buildings, control
building, truck shelters, etc., pipe racks and pipe bridges, miscellaneous structures such as pipe supports, electrical supports,
and their foundations. Prepared calculations and sketches of foundations of refinery equipment such as horizontal vessels and
heat exchangers, vertical vessels, stack, steam boilers, overhead condensers, feed chillers, storage drums, tanks and pumps.
Other items done were cable pits, trenches, duct banks, and road culverts. Prepared bar bending schedules, material and cost
estimates.
As Senior Engineer, I ensured that my works, as well as those of my colleagues were executed in a professional and timely
manner, satisfied project specifications and guidelines as well as the latest applicable industry standards, finished within the
budgeted man-hours, and passed our quality guidelines.
In all the projects mentioned above, I worked as Lead Structural Engineer. Performed interdisciplinary coordination and
squad checking with process, instrumentation, piping, mechanical and electrical engineers. Did the planning, scheduling and
implementation of civil/ structural works for those projects. Reported progress and status of deliverables to the Project
Manager on a weekly or as-needed basis. Analyzed problems and provided solutions to difficulties encountered in the project.
Convened and discussed with the Client representative on a regular basis for alignment and smooth execution and satisfactory
completion of projects. Prepared reports, technical queries, holds lists, engineering change notices, etc. Checked and signed
drawings, calculations and related documents, prior to submission to the Client. In some projects, I prepared Construction
Scope of Work and Specifications.
I participated in the acquisition of several projects for our company. I provided needed data in project proposals such as list of
deliverables, man-hour and manpower estimates, and discussed with the project management team about logical sequencing
of structural and civil activities.
July 1994 – Aug. 1995 (1 year) ARABIAN CONSULTING ENGINEERING CENTRE
Designer 1 (Engineer) Al Khobar, Kingdom of Saudi Arabia
Project: Ras Tanura Refinery Upgrade Project Pkg. 2, Ras Tanura, Saudi Arabia
Prepared structural calculations and sketches of steel and foundations for “Interconnecting Pipeway System” which
constituted a major work in this project. Participated in making solutions to interference problems encountered at the site.
Also prepared preliminary structural calculations and sketches of one Process Interface Building (PIB), which was a blast
3

4. resistant type of structure. Developed and backchecked structural drawings before their issuance to our Client. Prepared
material estimates. Utilized STAAD computer program, aside from manual calculations in executing work.
Mar. 1993 – July 1994 (1+ year) FLUOR DANIEL / AG &P, INC.
Designer Makati City, Philippines
Projects:
• Shell Tabangao Asset Renewal (STAR) Project ( located in Tabangao, Batangas, Philippines)
• Enron II (105 Megawatt Power Plant located in Subic, Zambales, Philippines)
While designated as a “designer”, I was given the task of an engineer, based on my ability and confidence of our discipline
head. Prepared calculations and sketches of structures, buildings and foundations, and oily water concrete sumps. Prepared
material estimates. Backchecked drawings to ensure that engineering sketches were correctly put into electronic drawings.
Checked sizes of concrete items; sizes, details and quantities of reinforcing bars, including splices and embedments; anchor
bolt type, length and projections. Checked structural steel sizes and orientations; bracing and configurations, and connections
to assure integrity of design. Followed project guidelines, and applicable international standards. Utilized RISA-2D computer
software, aside from manual calculations, in executing work.
Feb. 1992 – Dec. 1992 ( <1 year) FRAMATOME / SPIE BATIGNOLLES
Calculator Guangdong, People’s Republic of China
Note: The term“Calculator” was used in this project to refer to a member of the team who performed engineering
such as Pipe Stress analysis, and structural support calculations.
Project: Guangdong Nuclear Power Station (located in Daya Bay, Guangdong, Peoples Republic of China)
Prepared pipe stress analyses of small-bore lines and structural engineering of supports for loads due to gravity temperature,
pressure, seismic, rupture, building displacement, creep, etc., and to conform to their required functions, and safety
requirements considering stress and rigidity ratios per RCCM Code requirements. Verified structural integrity of field-
proposed modifications to original design against the same Code; utilized SYSPIPE and SUPIPE computer programs, aside
from manual calculations, in the execution of work. I also checked the works of other calculators to ensure accuracy and
compliance to Code requirements.
Nov. 1990 – Feb. 1992 (>1 year) GRANDSPAN DEVELOPMENT CORPORATION
Civil / Structural Engineer Tayuman, Binangonan, Rizal, Philippines
Projects:
• Channel 5 Communication Tower (700 ft. high)
Novaliches, Quezon City, Philippines
• Lattice structure Communication Towers designed per the EIA (Electronics Industry Association) Standard for towers,
utilizing STAAD III and STRAAD computer software packages.
• 120- ft. Span by 80- ft. Long (Rigid-Frame) One- Story Building, Subic, Zambales, Philippines.
• Various warehouse Prefabricated Steel Buildings
• Various transport structures such as trailer chassis.
• Conveyor tower used for quarrying aggregates
Prepared engineering calculations and sketches of steel structures and foundations. Forwarded my engineering sketches to our
draftsmen and estimators, and then checked the accuracy of their works. Inspected actual constructions works and helped in
the solution of difficulties, executed field revisions if necessary. Coordinated with our Client and other professionals and
engineers involved in the projects. Visually inspected steel fabrication. Utilized STAAD and STRAAD computer programs,
aside from manual calculations, in execution of work.
Jan. – Oct. 1990 (9 months) MARK K. VERGARA CONSTRUCTION
Construction Supervising Engineer Los Baños, Laguna, Philippines
Projects:
• One story residential house – located in Marikina City, Phils.- my work was Construction Supervision.
4

5. • 4-storey concrete commercial building –located in Batangas City, Phils. - my work was Structural analysis & design.
Supervised the construction of projects and ensured correct implementation of plans, drawings and specifications. Prepared
schedule, manpower requirement, and reports regarding construction progress. Whenever absolutely necessary, and upon
instruction of our manager, executed modifications to the original plans. Implemented quality and safety requirements and
other company standard operating procedures. Executed other duties when required.
EDUCATION
College: 1984-1989, Graduate of Bachelor of Science in Civil Engineering
Mapua Institute of Technology (Manila, Philippines)
High School: 1980-1984, Graduated Valedictorian
Central Quezon Academy (Mauban, Quezon)
Elementary School: 1974-1980, Graduated Valedictorian
Mauban South Elementary School (Mauban, Quezon)
Professional Memberships : Philippine Institute of Civil Engineers with License Number 0058442,
American Society of Civil Engineers (ASCE) –Permanent ID Number 10322442
TRAININGS / SEMINARS
At Work:
• ISO 9001:2000 Quality Management System – C&E Corp. Pasig City, Philippines ( March 2003)
• Training in structural engineering provided by Fluor Daniel, Inc. Philippines – ( February- March 2001)
• Marketing and Business Development Seminar – Saudi Engineering Group Int’l. (30 October 1996)
• Work Permit Receiver’s Course – Saudi Aramco Ras Tanura Refinery (21 September 1994)
• Safety Seminar – Saudi Aramco Ras Tanura (30 August 1994)
• Structural Engineering Practices – Fluor Daniel / AG&P, Manila, Philippines
• ISO 9000 (International Standard Organization - QA / QC Standards)
• Structural Design Practices Fluor Daniel / AG&P, Makati, Philippines
• Quality Assurance Indoctrination - Guangdong Nuclear Power Plant, PROC
In College:
• Roads and Bridges Construction – Department of Public Works and Highways
• Project Evaluation Review Technique / Critical Path Methods – Mapua Institute of Technology
• Seminar on Precast Concrete – Freyssinet – Mapua Institute of Technology
• Steel Manufacture and Fabrication – National Steel Corporation, Mapua Institute of Technology
• Sanitary Engineering In Action – Metropolitan Water Works & Sewerage System, National University
REFERENCES
• Alan H. Dean – CSA Manager (Ventech Engineers LLC) –tel. 281-770-2090
• Aaron Lavictoire – Lead Designer (Ventech Engineers LLC) – tel. 281-489-9411
• Ferdinand A. Castillo – Civil/Structural Engineer (CB&I) – tel. 713-933-5524
• Mark Owens – Lead Civil Engineer (Ventech Engineers LLC) – tel. 940-765-3183
5

6. • 4-storey concrete commercial building –located in Batangas City, Phils. - my work was Structural analysis & design.
Supervised the construction of projects and ensured correct implementation of plans, drawings and specifications. Prepared
schedule, manpower requirement, and reports regarding construction progress. Whenever absolutely necessary, and upon
instruction of our manager, executed modifications to the original plans. Implemented quality and safety requirements and
other company standard operating procedures. Executed other duties when required.
EDUCATION
College: 1984-1989, Graduate of Bachelor of Science in Civil Engineering
Mapua Institute of Technology (Manila, Philippines)
High School: 1980-1984, Graduated Valedictorian
Central Quezon Academy (Mauban, Quezon)
Elementary School: 1974-1980, Graduated Valedictorian
Mauban South Elementary School (Mauban, Quezon)
Professional Memberships : Philippine Institute of Civil Engineers with License Number 0058442,
American Society of Civil Engineers (ASCE) –Permanent ID Number 10322442
TRAININGS / SEMINARS
At Work:
• ISO 9001:2000 Quality Management System – C&E Corp. Pasig City, Philippines ( March 2003)
• Training in structural engineering provided by Fluor Daniel, Inc. Philippines – ( February- March 2001)
• Marketing and Business Development Seminar – Saudi Engineering Group Int’l. (30 October 1996)
• Work Permit Receiver’s Course – Saudi Aramco Ras Tanura Refinery (21 September 1994)
• Safety Seminar – Saudi Aramco Ras Tanura (30 August 1994)
• Structural Engineering Practices – Fluor Daniel / AG&P, Manila, Philippines
• ISO 9000 (International Standard Organization - QA / QC Standards)
• Structural Design Practices Fluor Daniel / AG&P, Makati, Philippines
• Quality Assurance Indoctrination - Guangdong Nuclear Power Plant, PROC
In College:
• Roads and Bridges Construction – Department of Public Works and Highways
• Project Evaluation Review Technique / Critical Path Methods – Mapua Institute of Technology
• Seminar on Precast Concrete – Freyssinet – Mapua Institute of Technology
• Steel Manufacture and Fabrication – National Steel Corporation, Mapua Institute of Technology
• Sanitary Engineering In Action – Metropolitan Water Works & Sewerage System, National University
REFERENCES
• Alan H. Dean – CSA Manager (Ventech Engineers LLC) –tel. 281-770-2090
• Aaron Lavictoire – Lead Designer (Ventech Engineers LLC) – tel. 281-489-9411
• Ferdinand A. Castillo – Civil/Structural Engineer (CB&I) – tel. 713-933-5524
• Mark Owens – Lead Civil Engineer (Ventech Engineers LLC) – tel. 940-765-3183
5