Dedicated Materials engineer and actually balanced between Integrity and Corrosion engineer, NACE member and holding NACE corrosion technician certificate and having solid experience in oil and gas field.

1. Page 1/4
Name: Sameh MHIMDI
Cell: (+216) 29 958 333 / (+216) 55 263 858
Address: Raoued Ariana- Tunisia
SUMMARY
Dedicated materials engineer and skilled especially in corrosion and its control rather than
materials and integrity. Consistently finishes projects under budget and ahead of schedule.
Forward-thinking professional familiar with standards and codes and all aspects of design,
construction and inspection
Certifications
 NACE corrosion technician certification N° 70619
 NACE Individual member
 Lloyd’s Register energy Americas RBMI certification
HIGHLIGHTS and SKILLS
 Corrosion engineering and Cathodic protection
 Risk based inspection
 Pipeline integrity management
 Materials selection
 Corrosion control and inspection
 Drawings of Pressure vessels
 Design calculations for pressure vessels
 Management
 Fitness for service
 AutoCAD, Solidworks
 Visual Basic
 Word, Excel, PPT
EDUCATION
2013: Materials engineer from the national school of engineers Sfax-Tunisia (Bachelor degree)
2009: Preparatory cycle from High institute of engineers’ studies Bizerte Tunisia
EXPERIENCE
From Mai 2014 To Current: TIC Inspection Group (Technique, inspection & control)
Position: Integrity Engineer
Key Projects:
From July to October 2015 and from January 2016 until now: Shell Tunisa
Position: Integrity Engineer

2. Page 2/4
 Implantation of Risk Based Inspection System (RBI) for Hasdrubal Asset: My
responsibilities in the Hasdrubal RBI project include the gathering of data of all
equipment’s such as pressure vessels, columns, Shell and Tube exchangers, air-cooled
exchangers, Tanks, Piping and Pipelines. Then I did the circuitization and the corrosion
study and the manipulation of the system using RBMI software.
 Elaboration of VB application used to estimate the susceptibility of equipment’s to wet H2S
corrosion
 Involved in Miskar Asset shut-down Mai 2016 as a position Data Manager with
responsibilities of recording and quality control of inspections, hydro-tests, defects
assessment and repair and the coordination between all members from inspectors to
managers.
 Quality Control of Written Scheme of Examination and determination of Inspection
Plan.
 Elaboration and management of Defect Register related to pressure vessels, piping and
pipelines.
 CIPS and DCVG activities of Hasdrubal pipeline.
 Analysis of corrosion probes and corrosion coupons readings.
 Assistance in Corrosion investigations
 Visual inspection of pressure vessels
From 15 October to 9 November 2015: STEG LPG Plant - Gabes
Position: QC Engineer
Project: STG LPG Plant Gabes Shut-down
 Selection of NDE inspection locations.
 Visual inspection of pressure vessels according to API 510
 Checking of calculation notes.
 Monitoring the progress of repairs.
Tasks in TIC before Jully 2015
 Elaboration of ECDA procedures: DCVG, CIPS, Pearson survey, AC Attenuation
survey and cathodic protection components survey (anodes and rectifiers).
 Elaboration of Cathodic Protection system of inspection
 Visual inspection, UT examination and Hardness testing of tanks and pressure vessels.
 Elaboration of procedures and report’s templates for different inspection and testing
methods (B-Scan, Bore-scope...)
 Assessment of defects using Fitness for service (FFS).
 Wave guide testing with acoustic emission
 Involved in welding internal training animated by experienced welding international
engineer
 Involved in painting internal training animated by experienced coating inspector
certified CSWIP Gr II painting Inspector

3. Page 3/4
From July 2013 to February 2014: ATIS- Sarl
Position: Corrosion engineer
• Management of cathodic protection projects from the study to the implementation phase:
The program include the assistance in the construction of the pipeline, soil analysis using
always soil resistivity and PH, sulfurs and chlorides are determined if required, then the
design of cathodic protection system (All projects were with Sacrificial anodes). This step
includes the determination of the current required, anodes quantity necessary for the
determined life of service, and the preparation of drawings using AutoCAD software. Finally
the management of the system’s installation. The main projects are:
 Barrage Gamgoum- Bizerte project.
 Pipeline of Lessouda-Sidi Bouzid Project.
 Project of reinforcement of the discharge line Sahel – South…
Other: Freelancer engineer
 Drawings of Pressure vessels.
 Design calculations for pressure vessels based on ASME code.
 Design of models of pieces and assemblies for carpenters and traditional potters.
 Design of cathodic protection system for the benefit of owners and contractors.
Trainings
Engineer training
From 01/2013 to 06/2013: EPPM Tunisia
Position: Intern Engineer
Topic: Elaboration of cathodic protection manual (Computer application) and design of
cathodic protection system with impressed current for an oil pipeline in Algeria.
Technician trainings
03/2012: PACKTEC Tunisia
Topic: Elaboration of a biodegradable polymer film « Polylactique acid (PLA) »
Worker trainings
From 10/2009 to 11/2009 & 01/2010: Etiquettes & Accessoires

4. Page 4/4
Topic: Management of production.
03 & 04/2010: CETIM Tunisia
Topic: Mechanical tests.
Languages
Arabic: Mother Tongue
English: Fluent
French: Fluent
Others
Adventures, Sports, Documentaries, Reading