Marine Loading Arm Catalog
•
4 likes•1,914 views
Marine Loading Arm is designed and manufactured for transferring liquids, such as Crude oil, oil products, asphalt, LNG, LPG, Alkalis Media, Acid, Sewage and chemicals. Based on advanced technology and many years experience, COSCO marine loading arms have achieved high reputation in petrol and LNG industry. Our customers include BASF, BP and other top brand companies in the world.
Report
Share
Report
Share
Download to read offline
Recommended
Pressure Safety Valve Sizing - API 520/521/526
No chemical process facility is immune to the risk of overpressure to avoid dictating the necessity for overpressure protection. For every situation that demands safe containment of process gas, it becomes an obligation for engineers to equally provide pressure relieving and flaring provisions wherever necessary. The levels of protection are hierarchical, starting with designing an inherently safe process to avoid overpressure followed by providing alarms for operators to intervene and Emergency Shutdown provisions through ESD and SIL rated instrumentation. Beyond these design and instrument based protection measures, the philosophy of containment and abatement steps such as pressure relieving devices, flares, physical dikes and Emergency Response Services is employed
Storage Tank Safety
Atmospheric Storage Tank Safety is dependent on various factors. To name a few:
1. Liquid movement in and out of the tank
2. Weather condition changes
3. Fire exposure
The presentation shows a basic overview of how we can create safe environment for storage and transportation of fluids.
What is MAWP? Difference between MAWP , Design Pressure and Operating Pressure
learn the Difference between MAWP, Design Pressure ,Operating Pressure & Hydrotest Pressure these four confusing equipment pressure terms.
Tank design - powerpoint slides
The document discusses different types of storage tanks including open top tanks, fixed roof tanks, and floating roof tanks. It provides details on supported cone roof tanks, self-supporting fixed roof tanks, single deck and double deck floating roof tanks, and internal floating roof tanks. Key parts and accessories for floating roof tanks are described such as the roof seal system, support legs, roof drain systems, and vents. Standards for storage tanks like API 650 and 653 are also mentioned.
Design Calculations of Venting in Atmospheric and Low-pressure Storage Tanks ...
hi
i have made an excel base software base on API st.2000 "Design Calculations of Venting in Atmospheric and Low-pressure Storage Tanks" to make calculation easy and accurate , i have take many case study and verified my software got positive result.
if you think you need this software for design the vent , please go to "rajiravi.ml" website there you can find complete information base on software and information based on contact etc...
API 653 TANK INSPECTION.pdf
The document provides information about API 653 tank inspections, tank maintenance, and causes of tank failure. It discusses why tanks should be inspected, proper inspection protocols including inspector credentials, common inspection procedures, and providing calculations. It also discusses a common sense approach to tank maintenance and inspections. Finally, it outlines common causes of catastrophic tank failure such as improper welding procedures, lack of inspections, corrosion, and overfilling tanks.
Tank design - word
This document discusses different types of storage tanks used in refineries and chemical plants. It describes atmospheric storage tanks, which operate at approximately atmospheric pressure, including fixed-roof tanks, floating-roof tanks, and fixed-roof tanks with an internal floating roof. Low-temperature and low-pressure storage tanks are also discussed. Standards for storage tank design include API-650 for atmospheric tanks and API-620 for low-pressure tanks. Floating roof tanks are described as minimizing vapor losses by maintaining a small vapor space or eliminating it completely.
AMMONIA storage
There are three main methods for storing liquid ammonia: storage at ambient temperature and pressure in cylindrical vessels holding 2.5-150 tons; storage under pressure in spherical vessels holding thousands of tons; and storage at atmospheric pressure by reducing the temperature to -33°C in flat-bottomed cylindrical tanks holding over 3000 tons. Safety measures for ammonia storage include instrumentation and alarms for critical parameters like pressure, temperature, and level, as well as a flare system to safely vent excess pressure and ammonia detectors to monitor for leaks.
Recommended
Pressure Safety Valve Sizing - API 520/521/526
No chemical process facility is immune to the risk of overpressure to avoid dictating the necessity for overpressure protection. For every situation that demands safe containment of process gas, it becomes an obligation for engineers to equally provide pressure relieving and flaring provisions wherever necessary. The levels of protection are hierarchical, starting with designing an inherently safe process to avoid overpressure followed by providing alarms for operators to intervene and Emergency Shutdown provisions through ESD and SIL rated instrumentation. Beyond these design and instrument based protection measures, the philosophy of containment and abatement steps such as pressure relieving devices, flares, physical dikes and Emergency Response Services is employed
Storage Tank Safety
Atmospheric Storage Tank Safety is dependent on various factors. To name a few:
1. Liquid movement in and out of the tank
2. Weather condition changes
3. Fire exposure
The presentation shows a basic overview of how we can create safe environment for storage and transportation of fluids.
What is MAWP? Difference between MAWP , Design Pressure and Operating Pressure
learn the Difference between MAWP, Design Pressure ,Operating Pressure & Hydrotest Pressure these four confusing equipment pressure terms.
Tank design - powerpoint slides
The document discusses different types of storage tanks including open top tanks, fixed roof tanks, and floating roof tanks. It provides details on supported cone roof tanks, self-supporting fixed roof tanks, single deck and double deck floating roof tanks, and internal floating roof tanks. Key parts and accessories for floating roof tanks are described such as the roof seal system, support legs, roof drain systems, and vents. Standards for storage tanks like API 650 and 653 are also mentioned.
Design Calculations of Venting in Atmospheric and Low-pressure Storage Tanks ...
hi
i have made an excel base software base on API st.2000 "Design Calculations of Venting in Atmospheric and Low-pressure Storage Tanks" to make calculation easy and accurate , i have take many case study and verified my software got positive result.
if you think you need this software for design the vent , please go to "rajiravi.ml" website there you can find complete information base on software and information based on contact etc...
API 653 TANK INSPECTION.pdf
The document provides information about API 653 tank inspections, tank maintenance, and causes of tank failure. It discusses why tanks should be inspected, proper inspection protocols including inspector credentials, common inspection procedures, and providing calculations. It also discusses a common sense approach to tank maintenance and inspections. Finally, it outlines common causes of catastrophic tank failure such as improper welding procedures, lack of inspections, corrosion, and overfilling tanks.
Tank design - word
This document discusses different types of storage tanks used in refineries and chemical plants. It describes atmospheric storage tanks, which operate at approximately atmospheric pressure, including fixed-roof tanks, floating-roof tanks, and fixed-roof tanks with an internal floating roof. Low-temperature and low-pressure storage tanks are also discussed. Standards for storage tank design include API-650 for atmospheric tanks and API-620 for low-pressure tanks. Floating roof tanks are described as minimizing vapor losses by maintaining a small vapor space or eliminating it completely.
AMMONIA storage
There are three main methods for storing liquid ammonia: storage at ambient temperature and pressure in cylindrical vessels holding 2.5-150 tons; storage under pressure in spherical vessels holding thousands of tons; and storage at atmospheric pressure by reducing the temperature to -33°C in flat-bottomed cylindrical tanks holding over 3000 tons. Safety measures for ammonia storage include instrumentation and alarms for critical parameters like pressure, temperature, and level, as well as a flare system to safely vent excess pressure and ammonia detectors to monitor for leaks.
Floating head heat exchanger - Maintainance
This document provides assembly, component, and maintenance details for a floating head heat exchanger. It includes general assembly and cross-sectional views labeling major components like the shell, tube bundle, floating head, and distributor. Step-by-step maintenance procedures are described for activities like removing the bundle, hydrotesting the shell and tube sides, eliminating tube leaks, and final hydrotesting before unit startup. Safety and proper housekeeping during maintenance are emphasized.
41914644 storage-tank-design-calculations-seismic-design-overturning-moment-b...
This document provides design calculations for the seismic and wind loading of an oil storage tank. It calculates the overturning moment due to seismic forces and wind forces acting on the tank. It then calculates the required strength of the tank shell, bottom plate, and anchorage to resist these overturning forces, taking into account the weight and distribution of the tank, contents, roof and supporting structures. Design requirements including allowable stresses and load factors are considered to ensure the structural integrity of the tank under the specified loading conditions.
P & i diagram and tagging philosphy for
The document discusses Piping and Instrumentation Diagrams (P&IDs) which are diagrams used in process industries to show piping, equipment, instrumentation and process flow. It provides details on the components of P&IDs such as abbreviations, instrument symbols and tagging philosophies. It also includes examples of equipment lists and coding systems used for P&IDs.
Ppt
This document provides an overview and summary of a basic training course on petroleum storage tanks. It discusses various tank types including fixed roof tanks, internal floating roof tanks, and floating roof tanks. It covers tank design elements like the structure of the tank bottom and floor, thickness of bottom plates, and attachment of the bottom to the shell. It also addresses tank foundations, including the need for foundations to allow for leak detection. The goals of the training are identified as learning to identify tank types and equipment, understand tank limitations, perform volume calculations, and operate tanks safely.
PROCESS STORAGE TANK LAH & LAHH LEVEL CALCULATION
The document contains parameters for a process storage tank including a diameter of 14 feet, height of 18 feet, normal liquid level of 6 feet, and pump inflow of 250 USGPM. It details calculations for the liquid alarm high-high level of 14.74 feet based on filling the tank from the overfill level to that point within 15 minutes, and liquid alarm high level of 8.23 feet calculated from filling within 45 minutes.
Pressure Relief Devices_Presenation
The document summarizes the basics of pressure relief devices, including why they are required, common components, classification and types. It provides examples of relief scenarios and causes of overpressure. The key steps in relief device sizing calculations are outlined. An example calculation is shown for checking the adequacy of installed relief devices for a reactor system during an emergency relief scenario involving an external fire.
Storage tanks basic training (rev 2)
The document provides an overview of petroleum storage tank training, covering topics such as:
- Tank design types including fixed roof, internal floating roof, and floating roof tanks
- Selection of tank type based on product properties and volatility
- Tank structure including bottom/floor design, bottom and shell plates, and foundation types
- Stability calculations and anchor requirements for withstanding wind loads
- Tank inspection and safety procedures
The training aims to identify tank components, understand tank limitations, perform calculations, and operate tanks safely.
Presentation on SECVIII
This document provides an overview and contents of an online course about ASME Section I and Section VIII fundamentals. It includes:
- An introduction to the ASME Boiler and Pressure Vessel Code which contains 12 sections covering various topics like power boilers, materials, pressure vessels, welding qualifications, and piping codes.
- Summaries of the scopes and requirements of key sections like Section I (power boilers), Section VIII (pressure vessels), and the B31 piping codes.
- Information on ASME certification and inspection procedures for pressure equipment.
- A note on converting between imperial and metric units in the ASME codes.
- An introduction to the fundamentals and design requirements
Static equipment in oil and gas industry
The document provides an introduction and overview of static equipment in the oil and gas industry. It discusses key areas of knowledge required for static equipment engineers, including the main types of static equipment used in oil and gas operations like pressure vessels, heat exchangers, reactors, and storage tanks. The presentation also covers important topics for static equipment such as materials selection and properties, stresses and design codes, and includes a case study on shell and tube heat exchangers. The webinar aims to help engineers in operating companies better understand static equipment.
An introduction to pressure vessels
This document provides an overview of pressure vessels, including their definition, classifications, materials, and design considerations. Pressure vessels are closed containers designed to hold gases or liquids above atmospheric pressure. They are commonly used in industries like petroleum refining, chemicals, power generation, and food and pharmaceuticals. Key aspects covered include vessel geometry, installation, thickness calculations, testing requirements, and applicable codes and standards like the ASME Boiler and Pressure Vessel Code.
Tank Introduction.pptx
The document provides information on storage tank design based on API 650 standards. It discusses the different types of storage tanks including their shapes, sizes, and applications. The two main types are atmospheric storage tanks and pressurized storage tanks. Cylindrical tanks are the most common and can have different roof types like fixed, floating, or cone/dome roofs depending on the stored liquid's flash point. Material selection, tank capacities, accessories, foundations, and important notes about containment are also covered.
AIR COOLED HEAT EXCHANGER
The document discusses air cooled heat exchangers. It describes how air cooled heat exchangers work by using air as the cooling medium, making them useful when water supply is limited. The document outlines the main components of air cooled heat exchangers, including axial fans, tube bundles, headers, fins and nozzles. It also discusses types of fans, headers, fins, factors that affect performance like fouling, and considerations for inspection and design of air cooled heat exchangers.
Pressure Relief valve sizing and design
Safety is the most important factor in designing a process system. Some undesired conditions might happen leading to damage in a system. Control systems might be installed to prevent such conditions, but a second safety device is also needed. One kind of safety device which is commonly used in the processing industry is the relief valve. A relief valve is a type of valve to control or limit the pressure in a system by allowing the pressurised fluid to flow out from the system.
Asme b31,pressure piping code
The document provides an overview of the ASME B31.3 Process Piping Code. It discusses the code's philosophy, organization, history, scope, fluid service categories, and application. Key points include that B31.3 applies to process piping systems in chemical, petroleum, and other plants. It covers piping for various fluids and has specific requirements for Category M and high pressure fluid services. The code is organized into chapters that address design, materials, components, fabrication, inspection, and other topics.
API SIRE-Source Inspector Rotating Equipment Notes-Dr. Samir Saad
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Ai Ch E Overpressure Protection Training
The document provides an overview of overpressure protection and relief system design. It discusses key concepts such as causes of overpressure, applicable codes and standards, the relief system design process, relief device terminology, and methods for determining relief loads from scenarios such as blocked outlets, thermal expansion, external fires, and automatic control failures. The document is intended to educate engineers on important considerations for properly sizing and designing pressure relief systems.
Storage tank inspection presentation
The document discusses several water and waste water management solutions from James Fisher Tank Inspection including:
1) A lead discriminator that can identify and locate service pipes without excavation in 30 seconds to 3 minutes.
2) 3D SONAR technology that can map settlements in harbors, tanks, and storage facilities with a survey time of 45 minutes and a maximum range and depth of 40 meters and 200 meters respectively.
3) Techniques for in-situ stress measurement in concrete and steel reinforcement to test and monitor concrete structures.
Report on Low temperature shift converter Catalyst reduction
In 2014 we charged fresh Copper oxide catalyst (vendor: Jonhson Matthey) into Low temperature shift converter (LTS is a reactor in which water gas shift conversion occurs and it is exothermic reaction).During Start-up LTS new catalyst has to be reduced before taking it into service.Hydrogen gas is used as reducing agent and natural gas is used as a carrier gas.Detailed report on our reduction activity is uploaded
143137557 storage-tanks
The document discusses the design of storage tanks. It covers general considerations for tank design codes, types of tanks, selection of tanks, material specifications, and design of various tank components like shells, bottoms, roofs, foundations. It also discusses seismic analysis, anchorage requirements, venting, and floating roof tank accessories. Key aspects covered include allowable stresses and corrosion allowances for materials, thickness calculations using different methods, wind girder design, and anchorage design considering uplift forces.
Boiler commissioning procedure
The document provides information on the commissioning process for a boiler. It involves several key steps: air leakage and hydro testing, ensuring boiler auxiliaries are ready, gas distribution testing, light up of the boiler, alkali boil-out and passivation to clean the boiler, steam blowing of piping, safety valve testing, and finally coal firing. The commissioning aims to make the boiler and its systems available for safe, smooth, and reliable operation after erection is completed.
JLA-CryoTec-Brochure-April-2015
JLA CryoTec designs marine loading arms for the liquid gas market focusing on safety, reliability, and quality. Their cable-free arms are supported and tested to withstand 30 years of daily operation. Key features ensure easy maintenance, moisture protection, fire resistance, and safety including ice fall prevention. JLA's 30+ years of experience and in-house testing facilities allow them to deliver high quality, durable loading arms and train customers.
Kof2008 Itll
This document introduces lazy lists, which are data structures that only calculate the needed parts of a list, unlike regular lists that calculate the entire list up front. It notes that Haskell supports lazy lists by default while Ruby can also support them. It describes different types of lazy lists, such as those with boundless, undefined, or defined lengths. It also discusses how to construct lazy lists and common operations like truncation, filtering, mapping, and folding.
More Related Content
What's hot
Floating head heat exchanger - Maintainance
This document provides assembly, component, and maintenance details for a floating head heat exchanger. It includes general assembly and cross-sectional views labeling major components like the shell, tube bundle, floating head, and distributor. Step-by-step maintenance procedures are described for activities like removing the bundle, hydrotesting the shell and tube sides, eliminating tube leaks, and final hydrotesting before unit startup. Safety and proper housekeeping during maintenance are emphasized.
41914644 storage-tank-design-calculations-seismic-design-overturning-moment-b...
This document provides design calculations for the seismic and wind loading of an oil storage tank. It calculates the overturning moment due to seismic forces and wind forces acting on the tank. It then calculates the required strength of the tank shell, bottom plate, and anchorage to resist these overturning forces, taking into account the weight and distribution of the tank, contents, roof and supporting structures. Design requirements including allowable stresses and load factors are considered to ensure the structural integrity of the tank under the specified loading conditions.
P & i diagram and tagging philosphy for
The document discusses Piping and Instrumentation Diagrams (P&IDs) which are diagrams used in process industries to show piping, equipment, instrumentation and process flow. It provides details on the components of P&IDs such as abbreviations, instrument symbols and tagging philosophies. It also includes examples of equipment lists and coding systems used for P&IDs.
Ppt
This document provides an overview and summary of a basic training course on petroleum storage tanks. It discusses various tank types including fixed roof tanks, internal floating roof tanks, and floating roof tanks. It covers tank design elements like the structure of the tank bottom and floor, thickness of bottom plates, and attachment of the bottom to the shell. It also addresses tank foundations, including the need for foundations to allow for leak detection. The goals of the training are identified as learning to identify tank types and equipment, understand tank limitations, perform volume calculations, and operate tanks safely.
PROCESS STORAGE TANK LAH & LAHH LEVEL CALCULATION
The document contains parameters for a process storage tank including a diameter of 14 feet, height of 18 feet, normal liquid level of 6 feet, and pump inflow of 250 USGPM. It details calculations for the liquid alarm high-high level of 14.74 feet based on filling the tank from the overfill level to that point within 15 minutes, and liquid alarm high level of 8.23 feet calculated from filling within 45 minutes.
Pressure Relief Devices_Presenation
The document summarizes the basics of pressure relief devices, including why they are required, common components, classification and types. It provides examples of relief scenarios and causes of overpressure. The key steps in relief device sizing calculations are outlined. An example calculation is shown for checking the adequacy of installed relief devices for a reactor system during an emergency relief scenario involving an external fire.
Storage tanks basic training (rev 2)
The document provides an overview of petroleum storage tank training, covering topics such as:
- Tank design types including fixed roof, internal floating roof, and floating roof tanks
- Selection of tank type based on product properties and volatility
- Tank structure including bottom/floor design, bottom and shell plates, and foundation types
- Stability calculations and anchor requirements for withstanding wind loads
- Tank inspection and safety procedures
The training aims to identify tank components, understand tank limitations, perform calculations, and operate tanks safely.
Presentation on SECVIII
This document provides an overview and contents of an online course about ASME Section I and Section VIII fundamentals. It includes:
- An introduction to the ASME Boiler and Pressure Vessel Code which contains 12 sections covering various topics like power boilers, materials, pressure vessels, welding qualifications, and piping codes.
- Summaries of the scopes and requirements of key sections like Section I (power boilers), Section VIII (pressure vessels), and the B31 piping codes.
- Information on ASME certification and inspection procedures for pressure equipment.
- A note on converting between imperial and metric units in the ASME codes.
- An introduction to the fundamentals and design requirements
Static equipment in oil and gas industry
The document provides an introduction and overview of static equipment in the oil and gas industry. It discusses key areas of knowledge required for static equipment engineers, including the main types of static equipment used in oil and gas operations like pressure vessels, heat exchangers, reactors, and storage tanks. The presentation also covers important topics for static equipment such as materials selection and properties, stresses and design codes, and includes a case study on shell and tube heat exchangers. The webinar aims to help engineers in operating companies better understand static equipment.
An introduction to pressure vessels
This document provides an overview of pressure vessels, including their definition, classifications, materials, and design considerations. Pressure vessels are closed containers designed to hold gases or liquids above atmospheric pressure. They are commonly used in industries like petroleum refining, chemicals, power generation, and food and pharmaceuticals. Key aspects covered include vessel geometry, installation, thickness calculations, testing requirements, and applicable codes and standards like the ASME Boiler and Pressure Vessel Code.
Tank Introduction.pptx
The document provides information on storage tank design based on API 650 standards. It discusses the different types of storage tanks including their shapes, sizes, and applications. The two main types are atmospheric storage tanks and pressurized storage tanks. Cylindrical tanks are the most common and can have different roof types like fixed, floating, or cone/dome roofs depending on the stored liquid's flash point. Material selection, tank capacities, accessories, foundations, and important notes about containment are also covered.
AIR COOLED HEAT EXCHANGER
The document discusses air cooled heat exchangers. It describes how air cooled heat exchangers work by using air as the cooling medium, making them useful when water supply is limited. The document outlines the main components of air cooled heat exchangers, including axial fans, tube bundles, headers, fins and nozzles. It also discusses types of fans, headers, fins, factors that affect performance like fouling, and considerations for inspection and design of air cooled heat exchangers.
Pressure Relief valve sizing and design
Safety is the most important factor in designing a process system. Some undesired conditions might happen leading to damage in a system. Control systems might be installed to prevent such conditions, but a second safety device is also needed. One kind of safety device which is commonly used in the processing industry is the relief valve. A relief valve is a type of valve to control or limit the pressure in a system by allowing the pressurised fluid to flow out from the system.
Asme b31,pressure piping code
The document provides an overview of the ASME B31.3 Process Piping Code. It discusses the code's philosophy, organization, history, scope, fluid service categories, and application. Key points include that B31.3 applies to process piping systems in chemical, petroleum, and other plants. It covers piping for various fluids and has specific requirements for Category M and high pressure fluid services. The code is organized into chapters that address design, materials, components, fabrication, inspection, and other topics.
API SIRE-Source Inspector Rotating Equipment Notes-Dr. Samir Saad
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Ai Ch E Overpressure Protection Training
The document provides an overview of overpressure protection and relief system design. It discusses key concepts such as causes of overpressure, applicable codes and standards, the relief system design process, relief device terminology, and methods for determining relief loads from scenarios such as blocked outlets, thermal expansion, external fires, and automatic control failures. The document is intended to educate engineers on important considerations for properly sizing and designing pressure relief systems.
Storage tank inspection presentation
The document discusses several water and waste water management solutions from James Fisher Tank Inspection including:
1) A lead discriminator that can identify and locate service pipes without excavation in 30 seconds to 3 minutes.
2) 3D SONAR technology that can map settlements in harbors, tanks, and storage facilities with a survey time of 45 minutes and a maximum range and depth of 40 meters and 200 meters respectively.
3) Techniques for in-situ stress measurement in concrete and steel reinforcement to test and monitor concrete structures.
Report on Low temperature shift converter Catalyst reduction
In 2014 we charged fresh Copper oxide catalyst (vendor: Jonhson Matthey) into Low temperature shift converter (LTS is a reactor in which water gas shift conversion occurs and it is exothermic reaction).During Start-up LTS new catalyst has to be reduced before taking it into service.Hydrogen gas is used as reducing agent and natural gas is used as a carrier gas.Detailed report on our reduction activity is uploaded
143137557 storage-tanks
The document discusses the design of storage tanks. It covers general considerations for tank design codes, types of tanks, selection of tanks, material specifications, and design of various tank components like shells, bottoms, roofs, foundations. It also discusses seismic analysis, anchorage requirements, venting, and floating roof tank accessories. Key aspects covered include allowable stresses and corrosion allowances for materials, thickness calculations using different methods, wind girder design, and anchorage design considering uplift forces.
Boiler commissioning procedure
The document provides information on the commissioning process for a boiler. It involves several key steps: air leakage and hydro testing, ensuring boiler auxiliaries are ready, gas distribution testing, light up of the boiler, alkali boil-out and passivation to clean the boiler, steam blowing of piping, safety valve testing, and finally coal firing. The commissioning aims to make the boiler and its systems available for safe, smooth, and reliable operation after erection is completed.
What's hot (20)
41914644 storage-tank-design-calculations-seismic-design-overturning-moment-b...
41914644 storage-tank-design-calculations-seismic-design-overturning-moment-b...
API SIRE-Source Inspector Rotating Equipment Notes-Dr. Samir Saad
API SIRE-Source Inspector Rotating Equipment Notes-Dr. Samir Saad
Report on Low temperature shift converter Catalyst reduction
Report on Low temperature shift converter Catalyst reduction
Viewers also liked
JLA-CryoTec-Brochure-April-2015
JLA CryoTec designs marine loading arms for the liquid gas market focusing on safety, reliability, and quality. Their cable-free arms are supported and tested to withstand 30 years of daily operation. Key features ensure easy maintenance, moisture protection, fire resistance, and safety including ice fall prevention. JLA's 30+ years of experience and in-house testing facilities allow them to deliver high quality, durable loading arms and train customers.
Kof2008 Itll
This document introduces lazy lists, which are data structures that only calculate the needed parts of a list, unlike regular lists that calculate the entire list up front. It notes that Haskell supports lazy lists by default while Ruby can also support them. It describes different types of lazy lists, such as those with boundless, undefined, or defined lengths. It also discusses how to construct lazy lists and common operations like truncation, filtering, mapping, and folding.
Mobile Welt: Welche Apps bringt die Zukunft?
Smartphones und Tablets verbreiten sich rasend schnell. Mittlerweile beträgt die Mobilfunkpenetration in Österreich bereits 150%. Vier von 10 Haushalten in Österreich nutzen Smartphonetarife, und schon seit dem 3. Quartal 2010 gibt es laut RTR Telekommonitor mehr mobile als feste Breitbandanschlüsse. Nur, welche Möglichkeiten bieten Smartphones und Tablet in der Zukunft. Wie lässt sich die integrierte Sensorik nutzen und welche Apps kommen auf uns zu. Mein Vortrag vermittelt einen kurzen Einblick in ausgewählte Projekte aus Wissenschaft und Wirtschaft und geht insbesondere auf die Konvergenz von Social Media und Near Field Communication (NFC) ein.
Fusion Yearbook. Association Euratom-Tekes. Annual Report 2013
Fusion Yearbook. Association Euratom-Tekes. Annual Report 2013VTT Technical Research Centre of Finland Ltd
This Annual Report summarises the fusion research activities of the Finnish and Estonian Research Units of the Association Euratom-Tekes in 2013. The emphasis of the work coordinated by EFDA was in ITER Physics, PPPT and the ITM Task Force. Other EFDA activities in 2013 were carried out within Goal Oriented Training and EFDA Fellowship. In addition, a significant fraction of Tekes activities was directed to F4E grants and ITER contracts.
Fusion physics work is carried out at VTT, Aalto University (AU), University of Helsinki (UH) and University of Tartu (UT). The main activities are plasma experiments in collaboration with tokamak laboratories, modelling and code development, and diagnostics related to the main European fusion facilities JET and AUG. In particular, Association Euratom-Tekes focused on (i) Heat and particle transport and fast particle studies, (ii) Plasma-wall interactions and material transport in the scrape-off layer, and (iii) Development of simulation codes and their integration into the ITM environment.
The Association participated in the EFDA JET Workprogramme 2013, including C31 experiments with the ITER-like wall, edge and core modelling, diagnostics development and code integration. Three physicists were seconded to the JET operating team and one to EFDA CSU. The Association participated also in the 2013 experimental programme of ASDEX Upgrade at IPP and the analysis of DIII-D and C-Mod data.
Technology work is carried out at VTT, AU and Tampere University of Technology (TUT) in close collaboration with Finnish industry. Industrial participation is co-ordinated by Tekes. The technology research and development includes the DTP2 facility at VTT Tampere, materials and joining techniques, vessel/in-vessel components, magnetic diagnostics for ITER by micromechanical magnetometers, upgrading of the JET NPA diagnostics, Power Plant Physics and Technology (PPPT) activities, plasma facing materials issues, erosion/re-deposition and material transport studies and development of coating techniques.
Association Euratom-Tekes is involved in Goal-Oriented Training in Remote Handling project, coordinated by Tampere University of Technology. In July 2013, the 40th EPS Plasma Physics Conference, organized by AU, gathered over 600 participants in Espoo.
Opportunity Meeting FLP Marta
Rex Maughan founded Forever Living Products over 34 years ago with the goal of providing health and wealth opportunities. The company is vertically integrated from aloe plantations to final products, ensuring quality from plant to packaging. Forever Living Products has achieved constant growth and global presence in over 150 countries while maintaining a debt-free status. The company offers opportunities for consumers to purchase quality aloe products at a discount or for distributors to earn income by building a team and selling products.
Nanomaterials
FEs have nanomaterial as one of the chapter in Applied chemistry it is with in the scope of their syllabus
Viewers also liked (6)
Fusion Yearbook. Association Euratom-Tekes. Annual Report 2013
Fusion Yearbook. Association Euratom-Tekes. Annual Report 2013
Recently uploaded
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Project Management Semester Long Project - Acuity
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Webinar: Designing a schema for a Data Warehouse
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Recently uploaded (20)
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany