This document provides instructions for performing amalgam restoration procedures, including:
- Proper mercury-alloy ratios and techniques for proportioning materials. Amalgam should have 50% mercury for conventional mixes.
- Trituration involves mixing alloy and mercury to coat alloy in mercury. This can be done by hand or mechanically. Proper mixing is important for strength and properties.
- Condensation compacts amalgam into the cavity to eliminate voids. It should be done promptly in small increments from the center outward.
- Carving reproduces tooth anatomy after amalgam sets. Burnishing and polishing provide the final shape and smooth surface.
objectives, applications, mechanism of size separation, the official standard of powders, sieves, sieve shaker, cyclone separator, air separator, bag filter, elutriation tank
Investigation of Drilling Time V/S Depth of Cut & Kerf Using Abrasive Jet Mac...iosrjce
Abrasive jet machining (AJM) is a processing non-traditional machine which operates materials
without producing shock and heat. AJM is applied for many purposes like drilling, cutting, cleaning, and
etching operation. The particles of the materials get accelerate in gas stream and are made to focus on
machine. It makes small fracture if particle focuses on the surface and the gas stream includes abrasive
particles and fractured particles away. The process parameters are used like variables which effect metal
removal. They are carrier gas, abrasive, velocity of abrasive, work material, and nozzle tip distance (NTD).In
abrasive jet machining, a focused stream of abrasive particles, carried by high pressure air or gas is made to
impinge on the work surface through a nozzle and the work material is made to impinge on the work surface
through a nozzle and work material is removed by erosion by high velocity abrasive particles. The effect of the
depth of material and the material characteristics on drilling time were investigated and discussed. Through
this work, it was observed that machinability index of the materials drilled plays an important role in AJM
process. The work investigates that there is nonlinear relation in drilling time v/s drilling depth and material of
low machinability takes more time to drill because of as depth increases air pressure losses its cutting ability. It
is also Investigate the effect of kerf and SOD on drilling time
Size separation is a unit operation that involves the separation of mixture of various size of particles into two or more portion by means of screening surface. Size separation is also known as sieving, sifting, classifying or screening.
objectives, applications, mechanism of size separation, the official standard of powders, sieves, sieve shaker, cyclone separator, air separator, bag filter, elutriation tank
Investigation of Drilling Time V/S Depth of Cut & Kerf Using Abrasive Jet Mac...iosrjce
Abrasive jet machining (AJM) is a processing non-traditional machine which operates materials
without producing shock and heat. AJM is applied for many purposes like drilling, cutting, cleaning, and
etching operation. The particles of the materials get accelerate in gas stream and are made to focus on
machine. It makes small fracture if particle focuses on the surface and the gas stream includes abrasive
particles and fractured particles away. The process parameters are used like variables which effect metal
removal. They are carrier gas, abrasive, velocity of abrasive, work material, and nozzle tip distance (NTD).In
abrasive jet machining, a focused stream of abrasive particles, carried by high pressure air or gas is made to
impinge on the work surface through a nozzle and the work material is made to impinge on the work surface
through a nozzle and work material is removed by erosion by high velocity abrasive particles. The effect of the
depth of material and the material characteristics on drilling time were investigated and discussed. Through
this work, it was observed that machinability index of the materials drilled plays an important role in AJM
process. The work investigates that there is nonlinear relation in drilling time v/s drilling depth and material of
low machinability takes more time to drill because of as depth increases air pressure losses its cutting ability. It
is also Investigate the effect of kerf and SOD on drilling time
Size separation is a unit operation that involves the separation of mixture of various size of particles into two or more portion by means of screening surface. Size separation is also known as sieving, sifting, classifying or screening.
Size Separation: Objectives, applications & mechanism of size separation, official standards of powders, sieves, size separation Principles, construction, working, uses, merits and demerits of Sieve shaker, cyclone separator, Air separator, Bag filter & elutriation tank.
Three Roll Mill 101 - An introduction to a high shear blending and dispersion...torreyhillstech
A three roll mill has three horizontally positioned rollers. Each roller rotates in an opposite direction from the adjacent roller with a tiny gap between them, creating tremendous shear force that can finely disperse, mix, refine or homogenize viscous materials.
This presentation explains in detail the working mechanism, the structure, the application, the maintenance and the specification of popular models.
For more information about three roll mills, please visit our website at http://www.threerollmill.com
Feldspar is a common raw material used in glassmaking, ceramics, and to some extent as a filler and extender in paint, plastics, and rubber. Feldspar grinding mill is mainly applied to grind non-inflammable, non-explosive and brittle materials with Mohs hardness under six.
Three roll mills are the most versatile dispersing system in use today, and because of its process-related benefits, it's often the only solution. EXAKT has redefined the three roll mill for laboratory, research, and production.
Objectives, applications, Mechanism, official standards of powders, Sieve, Standard for Sieve, Principles, construction, working, uses, merits and demerits of Air separator.
Size Separation: Objectives, applications & mechanism of size separation, official standards of powders, sieves, size separation Principles, construction, working, uses, merits and demerits of Sieve shaker, cyclone separator, Air separator, Bag filter & elutriation tank.
Three Roll Mill 101 - An introduction to a high shear blending and dispersion...torreyhillstech
A three roll mill has three horizontally positioned rollers. Each roller rotates in an opposite direction from the adjacent roller with a tiny gap between them, creating tremendous shear force that can finely disperse, mix, refine or homogenize viscous materials.
This presentation explains in detail the working mechanism, the structure, the application, the maintenance and the specification of popular models.
For more information about three roll mills, please visit our website at http://www.threerollmill.com
Feldspar is a common raw material used in glassmaking, ceramics, and to some extent as a filler and extender in paint, plastics, and rubber. Feldspar grinding mill is mainly applied to grind non-inflammable, non-explosive and brittle materials with Mohs hardness under six.
Three roll mills are the most versatile dispersing system in use today, and because of its process-related benefits, it's often the only solution. EXAKT has redefined the three roll mill for laboratory, research, and production.
Objectives, applications, Mechanism, official standards of powders, Sieve, Standard for Sieve, Principles, construction, working, uses, merits and demerits of Air separator.
(No "Download lock")........... Study it, Download it, Understand it, Apply it and Serve the community.
رَبِّ زدْنيِ عِلْماً (Arabic)..............Ameen.
Condensation and firing in porcealin /certified fixed orthodontic courses by ...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Dr. Azad Almuthaffer B.D.S., M.Sc. prosth.
THIRD EDITION 2015-2016
You can download these lectures from (moodle) electronic-learning platform: Or from this link: www.uobabylon.edu.iq/uobcoleges/default.aspx?fid=4 E-mail of lecturer: azadontics@gmail.com
Babylon university College of dentistry
Prosthodontic department
Second class
Azad Almuthaffer B.D.S., M.Sc. prosth.
Babylon university College of dentistry
Prosthodontic department
Third class
FOURTH EDITION 2015-2016 You can download these lectures from: (moodle) electronic-learning platform. or use this link: www.uobabylon.edu.iq/uobcoleges/default.aspx?fid=4 E-mail of lecturer: azadontics@gmail.com
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Executive Directors Chat Leveraging AI for Diversity, Equity, and InclusionTechSoup
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Delivering Micro-Credentials in Technical and Vocational Education and TrainingAG2 Design
Explore how micro-credentials are transforming Technical and Vocational Education and Training (TVET) with this comprehensive slide deck. Discover what micro-credentials are, their importance in TVET, the advantages they offer, and the insights from industry experts. Additionally, learn about the top software applications available for creating and managing micro-credentials. This presentation also includes valuable resources and a discussion on the future of these specialised certifications.
For more detailed information on delivering micro-credentials in TVET, visit this https://tvettrainer.com/delivering-micro-credentials-in-tvet/
A Survey of Techniques for Maximizing LLM Performance.pptx
Mana
1. Procedure for
Amalgam
Restoration
Upload By : Ahmed Ali Abbas
Babylon University College of Dentistry
download this file from Website on google
theoptimalsmile.wix.com/dentistry
2. Mercury/alloy ratio
• Historically the only way to achieve smooth and plastic
amalgam mixes was to use excess of mercury but this was
discarded later considering health hazard.
• for conventional mercury added system two techniques were
used for achieving mercury reduction in final restoration,
initially it is removed with the help of the cloth by squeezing
through it.
• Second techqnique- increasing dryness tchnique,during
condensation of each increment a mercury rich soft layer
comes to the surface.
• The most obvious method to reduce mercury content is
minimal mercury technique or eames
technique(mercury:alloy=1:1) ,in which sufficient mercury
should be present to form coherent and plastic mass after
trituration.
The mercury content of the finished restoration should be
comparable to the original mercury/alloy ratio usually 50 wt%
4. Proportioning
• The amount of alloy and mercury to be used can be described as
the mercury/alloy ratio which signifies the parts by weight of
mercury and of alloy to be used.
• The recommended mercury/alloy ratio for the lathe cut alloys is
approximately 1:1 or 50% mercury, in case of spherical alloy
mercury should be 42% because spherical particles have lower
surface/volume ratios.
• Use of little mercury results in dry mix, impairs the strength of
high copper amalgam and also reduces corrosion resistance.
• Dispenser should be held vertically to ensure consistent spills of
the mercury, tilting the bottle 45-degree results in unreliable
mercury/alloy ratios and the dispenser should be half full when
used.
5. Trituration
• The objective of trituration is to provide proper
amalgamation of the mercury and the alloy. The
alloy particles are coated with a film of oxide
which is removed by abrasion when alloy
particles and mercury are triturated
• Types- hand mixing
mechanical mixing
6. Hand mixing
• A glass mortar and pestle are used.
• The mortar has its inner surface roughened to increase
the friction .
• Usually a period of 25 to 45 second is sufficient for
hand mixing.
MORTAR AND PESTLE
7. Mechanical trituration
The disposable capsule serves as a mortar
and the cylindrical metal placed in the
capsule serves as the pestle.
The alloy and mercury are dispensed into the
capsule ,it is secured in the machine and the
machine is turned on. There is an automatic
timer for controlling the mixing time.
• Mordern amalgamator has two or more
operating speeds.
• The mulling process generally causes the
mix to cohere so that it can be readily
removed from the capsule.
• Spherical alloy require less amalgamation
time than lathe-cut alloys, amalgamation
time also depends on the quantity.
• For a given alloy/mercury ratio increased
trituration time and speed shortens the
working and setting time.
Amalgamat
or
8. UNDER TRITURATED MIX
rough and grainy and may crumble
tarnish and corrosion can occur
strenght is less
mix hardens too rapidly
excess mercury present
NORMAL MIX
Shiny surface,soft and smooth consistency
Warm when removed from capsule
Best compressive and tensile strenght
Has luster after polishing
Increased resistence to tarnish and corrosion
OVER TRITURATED MIX
Soupy mix,difficult to remove from capsule
Working time increased
Higher contraction of amalgam
Creep is increased
9. Consistency
• Proper combination of the alloy and mercury is a prime
manipulative consideration, the composition of the final
amalgam is the major determinant of the physical properties.
• Proper mix retains its luster longer after polishing and also
remains warm when it is removed from the capsule.
10. MULLING
Mulling is actually a continuation of trituration.
It increases the homogenity of the mass and get a single consistent
mix.
The mix is enveloped in dry piece of rubber dam and rubbed
between the first finger and thumb,or the thumb of one hand and the
palm for 2-5 sec.
13. condensation
• The goal of condensation is to compact
the alloy into the prepared cavity so that
the with sufficient mercury present to
ensure complete continuity of the matrix
phase between the remaining alloy
particles.
• After the mix is made condensation of
the amalgam should be promplty
initiated, condensation of partially set
material probably fractures and break up
the matrix that has already formed.
• Condensation should be as rapid as
possible and a fresh mix of amalgam
should be made if condensation takes
longer than 3-4 mins.
• The field of operation should be dry
before application.
14. Hand condensation
• Once the increment of amalgam is inserted into
the cavity preparation it should be condensed
with pressure to avoid voids and to adapt the
material to the walls, the condenser point is
forced into the amalgam mass under hand
pressure.
• Condensation is started at the center and then
condenser point is stepped little by little towards
the cavity wall.
• After condensation of the each increment excess
mercury should left over the first increment so
that it can bond with the next increment.
• The procedure of adding an
increment,condensing it,adding another
increment and so forth is continued until the
cavity is overfillled.
• In case the cavity is large well condensed
amalgam restoration can be achieved when the
mix has proper consistency.
Hand condenser
15. Contd….
• Size of the increments should be small.in larger piece of
increment it is difficult to reduce the voids and to adopt the
alloy to the cavity walls.
• Sufficient condensation force should be used to force the alloy
particles together and to reduce voids,and work mercury to the
surface to achieve bonding between the increments.
16. Condensation pressure
When a given force is applied,smaller the condenser greater the pressure
exerted on the amalgam.
. For eg-when a thrust of 40N exerted with the help of the 2mm diameter
results in condensation pressure 13.8MPa, the same thrust produce by
3.5mm in diameter produces 4.6MPa pressure, although forces as great as
66.7N is acceptable.
• Serrated condenser is preferred than round condenser in case of the
corner of the cavity.
• The shape of condenser points should conform to the area under
condensation.
• eg- a round condenser is ineffection in the corner of the cavity,a
triangular or rectangular is indicated in such areas.
23. Mechanical
condensation
It differs from hand condensation such that it is performed
by an automatic device.
Various mechanics are employed for such instruments-some
provide impact type of force and some use rapid
vibration..
Less energy is required than hand condensation and the
dentist feels less fatigue.
27. Carving and finishing
• After amalgam is condensed in cavity it is carved to reproduce
the proper tooth anatomy. It should be started when the
amalgam is hard enough to offer resistance to the carving.
• Burnishing of the occlusal anatomy can be accomplished with
the help of the ball burnisher. A rigid flat-bladed instrument is
best used on the smooth surfaces. Final smoothing can be done
with the help of moist cotton or with the help of prophylaxis
paste. While polishing temp should not raise beyond 60-degree.
• Final finish should be done after the amalgam is fully set,it
should be delayed for at least 24 hr. and a wet prophylaxis
paste should be used .