This document provides a bill of quantities for door and window items including precast concrete lintels, timber guards, timber door frames, timber panel doors, ironmongery like hinges and locks, and painting of various timber components. The items are listed with descriptions, units, rates, quantities, and amounts. Precast concrete lintels, timber guards and frames, panel doors, and ironmongery will be supplied and installed. Primer, undercoat and finishing coats of paint will be applied to timber guards under 150mm girth, frames over 150mm but under 300mm girth, and panel doors over 300mm girth.

1. Bill of Quantities
ITEM DESCRIPTION UNIT RATE QTY AMOUNT
(RM)
Door & Windows
Precast Concrete Lintel
A 115mm x 150mm depth
precast concrete grade 20 lintel
reinforced with 2 nos 12mm diameter
high tensile bars ands 6mm mild steel
stirrup at 150mm center and bedded in
cement and sand (1:3) mortar. M
Timber guards
B 75mm x 20mm sawn pressure treated
Grade B timber guard fixed to conrete
work & brickwork M
Timber Panel Door Frame
C 150mmx 50mm wrot pressure treated
grade B timber heads twice rebated and
screwed to timber guard. M
Timber Panel Door
D 830mm x 2055mmx 40mm thick timber
panel door in wrot pressure treated
grade B consisting of 8 nos open panels
for 40mm thick moulded timber panels,
3 nos of 130mm x 40mm grooved stiles,
5 nos of 130mm x 40mm grooved top
& bottom rails and grooved intermediate
rails all as per drawing no
DR/TSD/01 (D1) No
Ironmonegries
Supply and fix the following or other
equal and approved ironmongery complete
with requisite matching screws:-
E Dex 75mm 2 ball bearing pressed steel butt hinges
and fix to door leaf No
F Yale 5400 Series Stainless steel cylinder lockset fix
to door above 1000mm finished floor level. No
Painting
Prepare and apply one coat of Jotun Gardex zinc
chromate primer or other approved equivalent
primer paints as desribed on:

2. G Timber guard and timber frame not exceeding
150mm girth M
Prepare and apply one coat of Jotun Gardex zinc
chromate primer, one Jotun Gardex undercoat
and two finishing coats of Jotun Gardex or other
approved equivalent gloss enamel paint
as desribed on:
H Timber door frame, exceeding 150mm but not
exceeding 300mm M
Knotting, stopping and apply one coat of Jotun
Gardex primer, one Jotun Gardex undercoat
and two finishing coats of Jotun Gardex or other
approved equivalent gloss paint
as desribed on:
J Timber panel door leaf, over 300mm girth M2
TO COLLECTION :