In this study a mathematical model used to simulate the groundwater lowering in the Ancient Babylon City, located 90 kilometres south of the capital Baghdad, Iraq. The solution proposed within this study is constructing of subground in addition to use 21 discharging wells with (45)m depth
distributed around the study area, which covers about (11) km2 Four scenarios are presented basing on the number and location of subground dams used. For each scenario, wells discharge and time of operation are varied and the results were analyzed. The results showed that installing of subground dam effects significantly groundwater elevations in the studied region and reduce time and efforts required to lower the Ancient Babylon City.
Runoff modelling using hec hms for rural watershedEditorIJAERD
Due to climate change it is very essential to do hydrological modelling. Reliable models are essential for planning,
developmental works, prediction and safety of the population. Hydrological models are used to determine catchment
discharge/flow through an efficient way. HEC-HM (Hydrological engineering centre Hydrological modelling system) is
one of hydrological modelling tool developed by United States army corps of engineer (USACE) for event as well as for
continuous simulations. Models, especially continuous simulations are useful for future predictions of stream flow due to
land-use changes or extreme events phenomenon. In this study continuous hydrologic modellingwas carried out using
HEC HMS modelling tool.
Deficit and Constant Loss methods with Clark transform methods were selected. The calibrated model (period
1986-1988) was validated with data set of the period of 2009-2013. Study concluded that the model recommended and
can be used for stated River as decision support tool in the design and operation.
Application of Soft Computing Techniques for Analysis of Groundwater Table Fl...drboon
Being a good quality water resource, groundwater was over used during the last three decades to serve high water demand due to rapid growth in Bangkok and its vicinity. Excessive pumping rate of groundwater in Bangkok results in land subsidence problem and groundwater quality deterioration due to saltwater intrusion into shallow aquifers adjacent to the coast. This study applied a simple linear Genetic Algorithm (GA) model as an alternative tool for monitoring and forecasting of groundwater table. Nonthaburi aquifer, one of three major aquifers amongst seven aquifers in greater Bangkok area, was analyzed in the study. Monthly groundwater table of 43 monitoring wells, amongst 92 wells, 12 years (1997-2009) data was analyzed with land use map. GA was used to divide groundwater basin into sub-regions. Comparison between capability of GA and Artificial Neural Network (ANN) models for prediction of groundwater level reveals that ANN model has a better performance for all cases. However, GA model might be used to predict groundwater level with an acceptable accuracy (9% to 26% relative error). Better performance was obtained in medium to high residential area and industrial area (9-19% relative error). Due to its simplicity as well as period of record length of data requirement, GA is another appropriate alternative tool for monitoring and forecasting groundwater table fluctuation particularly for insufficient data area.
Runoff modelling using hec hms for rural watershedEditorIJAERD
Due to climate change it is very essential to do hydrological modelling. Reliable models are essential for planning,
developmental works, prediction and safety of the population. Hydrological models are used to determine catchment
discharge/flow through an efficient way. HEC-HM (Hydrological engineering centre Hydrological modelling system) is
one of hydrological modelling tool developed by United States army corps of engineer (USACE) for event as well as for
continuous simulations. Models, especially continuous simulations are useful for future predictions of stream flow due to
land-use changes or extreme events phenomenon. In this study continuous hydrologic modellingwas carried out using
HEC HMS modelling tool.
Deficit and Constant Loss methods with Clark transform methods were selected. The calibrated model (period
1986-1988) was validated with data set of the period of 2009-2013. Study concluded that the model recommended and
can be used for stated River as decision support tool in the design and operation.
Application of Soft Computing Techniques for Analysis of Groundwater Table Fl...drboon
Being a good quality water resource, groundwater was over used during the last three decades to serve high water demand due to rapid growth in Bangkok and its vicinity. Excessive pumping rate of groundwater in Bangkok results in land subsidence problem and groundwater quality deterioration due to saltwater intrusion into shallow aquifers adjacent to the coast. This study applied a simple linear Genetic Algorithm (GA) model as an alternative tool for monitoring and forecasting of groundwater table. Nonthaburi aquifer, one of three major aquifers amongst seven aquifers in greater Bangkok area, was analyzed in the study. Monthly groundwater table of 43 monitoring wells, amongst 92 wells, 12 years (1997-2009) data was analyzed with land use map. GA was used to divide groundwater basin into sub-regions. Comparison between capability of GA and Artificial Neural Network (ANN) models for prediction of groundwater level reveals that ANN model has a better performance for all cases. However, GA model might be used to predict groundwater level with an acceptable accuracy (9% to 26% relative error). Better performance was obtained in medium to high residential area and industrial area (9-19% relative error). Due to its simplicity as well as period of record length of data requirement, GA is another appropriate alternative tool for monitoring and forecasting groundwater table fluctuation particularly for insufficient data area.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Quantitative evaluation and analysis of morphometric parameters derived from ...AM Publications
GIS has become a key source to understand the hydrological conditions of watersheds for the last few decades. Arc Hydro tool of ArcGIS has been proven its role in the automated extraction of drainage network and morphometric analysis from DEMs. The delineation of drainage network can be done either manually from topographic sheets or derived from Digital Elevation Model (DEM) data by means of computational methods. In the present work, ASTER DEM has been incurred to extract drainage network with the aid of Arc hydro tool. The Vaishali River basin of Madhya Pradesh has been taken as the study area. This study has been done primarily based on a geo-spatial software ARC GIS in which ARC HYDRO a tool has been used extensively. The quantitative evaluation and analysis of about twenty morphometric parameters has been done based on the linear, areal and relief aspects. The analysis has revealed that the Vaishali River basin is a fifth order basin showing dendritic drainage pattern with drainage density of 0.40 per km and stream frequency of 0.08 per km2. Low drainage density indicates the basin has not been much affected by structural disturbances while drainage frequency and very coarse drainage texture specifies low relief and porous, permeable rocks beneath the ground surface. The form factor, circularity ratio and elongated ratio suggest the basin shape as elongated. The area has low to moderate relief and slopes displays moderate relief ratios. It is concluded that this technique is not only reduces time but also provides valuable results which are very helpful for watershed management studies.
Morphometry and Hydrology relationship in Lidder valleyShakil Romshoo
Morphometric analysis of the Lidder catchment was carried out using geospatial technique.The analysis revealed that the area has uniform lithology and is structurally permeable. The high drainage density of all
subwatersheds indicate more surface runoff.The morphometric analysis also indicates that the area is more prone to weathering due to very-coarse to coarse drainage texture.
Morphometric analysis of a vrishabhavathi sub watershed upstream side of gali...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Runoff is one of the most significant hydrological variables used in most of the water resources applications. Physiographically the area is characterized by undulating topography with plains and valleys. The Soil Conservation Service Curve Numbers also known as hydrologic soil group method were used in this study. This method is adaptable and suitable approach for quick runoff estimation and is approximately easy to use with minimum data and it gives good result. From the study yearly rainfall and runoff were estimated easily. The study area covers an area of 466.02 km2, having maximum length of 36.5 km. The maximum and minimum elevation of the basin is 569 m and 341 m above MSL, respectively.
Effect of Height and Surface Roughness of a Broad Crested Weir on the Dischar...RafidAlboresha
Weir is usually incorporated as control or regulation devices in hydraulic systems,
with flow measurement as their secondary. It is normally intended for use in the field and thus
to regulate broad discharges. Broad-Crested weir is among the oldest common weir types. In this
paper, the effect of height and surface roughness for different Board Crested weirs models were
studied on discharge coefficient (Cd) in a horizontal open channel. In the crest of the weir,
certain materials may be combined with concrete (e.g., boulders) or may be used as cladding to
minimize the effect of water overflow (e.g. stone). The weir surface should not be considered
smooth in this case, and the discharge coefficient (Cd) must be re-estimated. For these purposes, laboratory flume was used to study the effect of height and surface roughness on the discharge coefficients with four of the different weir models dimensions of the concrete blocks. In this study, the flow conditions were considered to be free water flow and the viscosity effect was neglected. In all cases, the weir height effect was directly proportional to the discharge coefficient while the surface roughness effect was found to be inversely proportional to the coefficient Cd of the case study.
Flood Mapping via HEC-RAS Model and ArcGISLengthong KIM
This research was taken place along the lower Mekong river reach part in Cambodia. The purpose of the study is to evaluate the HEC-RAS performance whether it eligible for Cambodia flood studies or not.
Groundwater Quality Modelling using Coupled Galerkin Finite Element and Modif...AM Publications
This paper presents a coupled Galerkin finite element model for groundwater flow simulation (FEFLOW)
and Modified Method of Characteristics model for the simulation of solute transport (MMOCSOLUTE) in twodimensional,
transient, unconfined groundwater flow systems. The coupling factor is velocity field which is simulated
by finite element technique. The study mainly focuses on groundwater quality aspects hence the flow simulation
model has been kept conventional whereas the solute transport model is improvised by approximating dispersion term.
This coupled model is used to obtain the space and time distribution of head and concentration for the reported
synthetic test case. Further the sensitivity of model results to variation in parameters viz. porosity, dispersivity and
combined injection and pumping rates is analyzed. The model results are compared with the reported solutions of the
model presented by Chiang et al. (1989).
Morphometric analysis of vrishabhavathi watershed using remote sensing and giseSAT Journals
Abstract Vrishabhavathi Watershed is a constituent of the Arkavathi River Basin, Bangalore Urban and Ramanagara District and covers an area of 381.465Km2, representing seasonally dry tropical climate. To achieve the Morphometric analysis, Survey of India (SOI) topomaps in 1:50000 scales are procured and the boundary line is extracted by joining the ridge points. This will serve as study area or area of interest for preparing base map and thematic maps. The recent changes are updated with the help of Remote sensing satellite data. The drainage map is prepared with the help of Geographical Information System tool and morphometric parameters such as linear, aerial and relief aspects of the watershed have been determined. These dimensionless and dimensional parametric values are interpreted to understand the watershed characteristics. From the drainage map of the study area dendritic drainage pattern is identified. Strahler (1964) stream ordering method is used for stream ordering of the watershed. The drainage density of the watershed is 1.697 km/km2. Index Terms: Morphometric analysis, Remote Sensing, GIS, SOI Topomap and Vrishabhavathi Watershed
Rainfall runoff is one of the important hydrological variables in determining land
and water resources application. Curve Number method is widely used and efficient
method to estimate the infiltration characteristic of the watershed in accordance with
the land use/land cover property and soil property. In this study to estimate the
rainfall runoff modeling in this study area with an area of 152.81 sq km using Soil
Conservation Service Curve Number (SCS-CN) method and GIS. The estimated
amount average annual rainfall 1322.29mm from 1999 to 2013.The runoff varied
from 285 mm–4053mm, which is corresponds to 61.6% of annual average rainfall of
Thiruvalur district. These details are used for better watershed management and
conservation purpose.
New in 2016, Outlook Conway is a half-day economic forum that provides an in-depth look at the Conway-area economy. During the inaugural event, expert panelists focused on commercial real estate, public projects, higher education, and economic development.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Quantitative evaluation and analysis of morphometric parameters derived from ...AM Publications
GIS has become a key source to understand the hydrological conditions of watersheds for the last few decades. Arc Hydro tool of ArcGIS has been proven its role in the automated extraction of drainage network and morphometric analysis from DEMs. The delineation of drainage network can be done either manually from topographic sheets or derived from Digital Elevation Model (DEM) data by means of computational methods. In the present work, ASTER DEM has been incurred to extract drainage network with the aid of Arc hydro tool. The Vaishali River basin of Madhya Pradesh has been taken as the study area. This study has been done primarily based on a geo-spatial software ARC GIS in which ARC HYDRO a tool has been used extensively. The quantitative evaluation and analysis of about twenty morphometric parameters has been done based on the linear, areal and relief aspects. The analysis has revealed that the Vaishali River basin is a fifth order basin showing dendritic drainage pattern with drainage density of 0.40 per km and stream frequency of 0.08 per km2. Low drainage density indicates the basin has not been much affected by structural disturbances while drainage frequency and very coarse drainage texture specifies low relief and porous, permeable rocks beneath the ground surface. The form factor, circularity ratio and elongated ratio suggest the basin shape as elongated. The area has low to moderate relief and slopes displays moderate relief ratios. It is concluded that this technique is not only reduces time but also provides valuable results which are very helpful for watershed management studies.
Morphometry and Hydrology relationship in Lidder valleyShakil Romshoo
Morphometric analysis of the Lidder catchment was carried out using geospatial technique.The analysis revealed that the area has uniform lithology and is structurally permeable. The high drainage density of all
subwatersheds indicate more surface runoff.The morphometric analysis also indicates that the area is more prone to weathering due to very-coarse to coarse drainage texture.
Morphometric analysis of a vrishabhavathi sub watershed upstream side of gali...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Runoff is one of the most significant hydrological variables used in most of the water resources applications. Physiographically the area is characterized by undulating topography with plains and valleys. The Soil Conservation Service Curve Numbers also known as hydrologic soil group method were used in this study. This method is adaptable and suitable approach for quick runoff estimation and is approximately easy to use with minimum data and it gives good result. From the study yearly rainfall and runoff were estimated easily. The study area covers an area of 466.02 km2, having maximum length of 36.5 km. The maximum and minimum elevation of the basin is 569 m and 341 m above MSL, respectively.
Effect of Height and Surface Roughness of a Broad Crested Weir on the Dischar...RafidAlboresha
Weir is usually incorporated as control or regulation devices in hydraulic systems,
with flow measurement as their secondary. It is normally intended for use in the field and thus
to regulate broad discharges. Broad-Crested weir is among the oldest common weir types. In this
paper, the effect of height and surface roughness for different Board Crested weirs models were
studied on discharge coefficient (Cd) in a horizontal open channel. In the crest of the weir,
certain materials may be combined with concrete (e.g., boulders) or may be used as cladding to
minimize the effect of water overflow (e.g. stone). The weir surface should not be considered
smooth in this case, and the discharge coefficient (Cd) must be re-estimated. For these purposes, laboratory flume was used to study the effect of height and surface roughness on the discharge coefficients with four of the different weir models dimensions of the concrete blocks. In this study, the flow conditions were considered to be free water flow and the viscosity effect was neglected. In all cases, the weir height effect was directly proportional to the discharge coefficient while the surface roughness effect was found to be inversely proportional to the coefficient Cd of the case study.
Flood Mapping via HEC-RAS Model and ArcGISLengthong KIM
This research was taken place along the lower Mekong river reach part in Cambodia. The purpose of the study is to evaluate the HEC-RAS performance whether it eligible for Cambodia flood studies or not.
Groundwater Quality Modelling using Coupled Galerkin Finite Element and Modif...AM Publications
This paper presents a coupled Galerkin finite element model for groundwater flow simulation (FEFLOW)
and Modified Method of Characteristics model for the simulation of solute transport (MMOCSOLUTE) in twodimensional,
transient, unconfined groundwater flow systems. The coupling factor is velocity field which is simulated
by finite element technique. The study mainly focuses on groundwater quality aspects hence the flow simulation
model has been kept conventional whereas the solute transport model is improvised by approximating dispersion term.
This coupled model is used to obtain the space and time distribution of head and concentration for the reported
synthetic test case. Further the sensitivity of model results to variation in parameters viz. porosity, dispersivity and
combined injection and pumping rates is analyzed. The model results are compared with the reported solutions of the
model presented by Chiang et al. (1989).
Morphometric analysis of vrishabhavathi watershed using remote sensing and giseSAT Journals
Abstract Vrishabhavathi Watershed is a constituent of the Arkavathi River Basin, Bangalore Urban and Ramanagara District and covers an area of 381.465Km2, representing seasonally dry tropical climate. To achieve the Morphometric analysis, Survey of India (SOI) topomaps in 1:50000 scales are procured and the boundary line is extracted by joining the ridge points. This will serve as study area or area of interest for preparing base map and thematic maps. The recent changes are updated with the help of Remote sensing satellite data. The drainage map is prepared with the help of Geographical Information System tool and morphometric parameters such as linear, aerial and relief aspects of the watershed have been determined. These dimensionless and dimensional parametric values are interpreted to understand the watershed characteristics. From the drainage map of the study area dendritic drainage pattern is identified. Strahler (1964) stream ordering method is used for stream ordering of the watershed. The drainage density of the watershed is 1.697 km/km2. Index Terms: Morphometric analysis, Remote Sensing, GIS, SOI Topomap and Vrishabhavathi Watershed
Rainfall runoff is one of the important hydrological variables in determining land
and water resources application. Curve Number method is widely used and efficient
method to estimate the infiltration characteristic of the watershed in accordance with
the land use/land cover property and soil property. In this study to estimate the
rainfall runoff modeling in this study area with an area of 152.81 sq km using Soil
Conservation Service Curve Number (SCS-CN) method and GIS. The estimated
amount average annual rainfall 1322.29mm from 1999 to 2013.The runoff varied
from 285 mm–4053mm, which is corresponds to 61.6% of annual average rainfall of
Thiruvalur district. These details are used for better watershed management and
conservation purpose.
New in 2016, Outlook Conway is a half-day economic forum that provides an in-depth look at the Conway-area economy. During the inaugural event, expert panelists focused on commercial real estate, public projects, higher education, and economic development.
The use of the term cisgenesis is an attempt to distinguish GM plants or other organisms produced in this way from transgenics that is GM plants that contain DNA from unrelated organisms. Schouten et al. (2006) introduced the term cisgenesis and defined cisgenesis as the modification in the genetic background of a recipient plant by a naturally derived gene from a cross compatible species including its introns and its native promoter and terminator flanked in the normal sense orientation. Since cisgenes shared a common gene pool available for traditional breeding the final cisgenic plant should be devoid of any kind of foreign DNA viz., selection markers and vector- backbone sequences. Sometimes the word cisgenesis is also referred to as Agrobacterium-mediated gene transfer from a sexually compatible plant where only the T-DNA borders may be present in the recipient organism after transformation (EFSA, 2012). The cisgenesis precludes linkage drag, and hence, prevents hazards from unidentified hitch hiking genes (Schouten, and Jacobsen, 2008). Compared to transgenesis, one of the disadvantages shared by cisgenesis is that characters outside the sexually compatible gene pool cannot be introduced. Furthermore, development of cisgenic crops involves extraordinary proficiency and time compared to transgenic crops. Therefore, the required genes or fragments of genes may not be readily accessible but have to be isolated from the sexually compatible gene pool (Holme et al., 2013).
On 16 February 2012, European Food Safety Authority (EFSA, 2012) reported the detail study concerning the safety aspects of cisgenic plants and validated that cisgenic plants are secure to be used in terms of environment, food and feed, similar to the traditionally bred plants. However, the present GMO regulation keeps the cisgenic micro-organisms out from its supervision. The first scientific statement of bringing forth a true plant obtained by cisgenic approach was reported in apple through the insertion of the internal scab resistance gene HcrVf2 influenced by their own regulatory genes into the cultivar Gala, a scab susceptible cultivar (Vanblaere et al., 2011). Barley with improved phytase activity was produced successfully by Holme et al. 2011, through cisgenic approach. Late blight resistant potatoes have developed by cisgene stacking of R- gene (jo et al., 2014).
The groundwater is one of leachate generation components in landfills. So, the control of
groundwater level below the base level of landfills is very important for both of decreasing the rate of
leachate generation and minimizing the potential for groundwater contamination. The main aim of this study
is how to control on the pollution problem in landfill site using an improved dewatering system. In this
study, the use of double drainage pipes as a protecting system to control on the pollution in landfill pattern
in case of rising the groundwater level are obtained. Flow patterns for models representing dewatering of
groundwater flow outward landfill site that has geo-membrane liner using the double drainage pipes are
investigated. The double drainage pipes are designed with various parameters for each model. All
investigated models are founded on isotropic soil. Numerical model was used to construct the flow pattern
(flow net) for the models. The solution was presented to study the effect of the depth and the distance
between the single drainage system on the depression of groundwater level as well as the influences of
horizontal and vertical distances between the perforated pipes in double drainage system were achieved.
Flood is the most devastating environmental hazard throughout the world causing loss of precious human lives
and damage to infrastructure. They occur by unusual overflow of water over the banks of rivers or channels
thus inundating the surrounding area. The magnitude and intensity of floods depends on hydrological and
physical characteristics of the catchment and river channel. Adverse effects of these floods can be alleviated
through mapping of floodplain which is essentially the area around the channel which is likely to be flooded.
One of the methods of floodplain delineation is modeling the river flow using computer models such as the
Hydrologic Engineering Center River Analysis System (HEC-RAS). In this study the application of 2D HEC-RAS
river model is used to develop a floodplain map of river Kabul.
journal of engineering and applied science 18.pdfnareshkotra
The International Journal of Mechanical Engineering Research and Technology is an international online journal in English published Quarterly offers a speed publication schedule with whilst maintaining rigorous peer review and the use of recommended electronic formats for article delivery of expedites the process of All submitted research articles are subjected to immediate rapid screening by the editors consultation with the Editorial Board or others working in the field as appropriate to ensure that they are as same as to be the level of interest and importance appropriate for the journal.
journal of applied science and engineering.pdfnareshkotra
The International Journal of Mechanical Engineering Research and Technology is an international online journal in English published Quarterly offers a fast publication schedule with maintaining rigorous peer review and the use of recommended electronic formats of article delivery expedites the process of All submitted research articles are subjected to immediate rapid screening by the editors consultation with the Editorial Board or others working in the field of appropriate to ensure that they are likely to be the level of interest and importance of appropriate for the journal.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
This study aims to investigate the effect of single cavity when it presence at a
specific location within the homogenous soil, on the behavior of seepage and uplift
pressure under a hydraulic structure. The results are analyzed to introduce
deterministic formulae for calculating the amount of seepage and the uplift pressure
head. The work was done in three stages by using experimental investigation; the first
stage includes 36 models of 75mm in diameter cavity, while the second and the third
stages includes eight models for each with 100mm and 34mm diameter of cavity,
respectively. The results shows that, when the cavity presence at the left side its impact
was positive on the seepage behavior. While the influence was changed to a negative
impact when the cavity presence at the right side, except at some specific locations. The
statistical software has been employed to generate the two deterministic formulae, and
the results of multiple regressions are checked by statistical indices for the purpose of
recognizing the reliability of the proposed formulae.
DESIGN A HYDRAULIC STRUCTURE USING THE RAINFALL INTENSITY- DURATION- FREQUENC...IAEME Publication
A hydrologic analysis is an essential prerequisite for any project, is used to the evaluation of the watershed area for a stream and is used to determine the design discharge or the amount of runoff the culvert should be designed to convey. In this paper the relationship between the intensity duration-
and frequency of rainfall are used to obtain the value of discharge to design a pipe culvert for Najaf station in Iraq, from the relationship between Intensity-duration-frequency (IDF) curves, the values of intensity for 10, 100 years return periods with 15, 30, and 60 min. durations are obtained and discharge values are obtained from multiplied the catchment area for Najaf station by the values of intensity for obtaining.
Emperical and Numerical Solution Of Seepage Problems Underneath Hydraulic S...RafidAlboresha
Hydraulic structures are structures submerged or partially submerged in water, they’re used to retain or divert natural water flow. Any hydraulic structure that retains water is faced with seep-age problems as the water seeks the path with the least resistance through or under the hydraulic structure. If the water carries materials as it flows or exerts high pressure on the floor of the structure, it will cause failures such as piping and cracks and there are many ways to prevent that, including cutoffs. In this paper, seepage is analyzed for different cases by using the empirical method (Khosla’s theory) and the numerical method by using computer software (SEEP/W). The results had some slight differences between the two methods as a result of not taking into account the effect of soil characteristics of the empirical method. However, the water pressure heads underneath the impervious floor that calculated by the numerical method were greater.
The Effect of Geometry Parameters and Flow Characteristics on Erosion and Sed...Dr. Amarjeet Singh
One of the most critical problems in the river
engineering field is scouring, sedimentation and morphology
of a river bed. In this paper, a finite volume method
FORTRAN code is provided and used. The code is able to
model the sedimentation. The flow and sediment were
modeled at the interception of the two channels. It is applied
an experimental model to evaluate the results. Regarding the
numerical model, the effects of geometry parameters such as
proportion of secondary channel to main channel width and
intersection angle and also hydraulic conditionals like
secondary to main channel discharge ratio and inlet flow
Froude number were studied on bed topographical and flow
pattern. The numerical results show that the maximum
height of bed increased to 32 percent as the discharge ratio
reaches to 51 percent, on average. It is observed that the
maximum height of sedimentation decreases by declining in
main channel to secondary channel Froude number ratio. On
the assessment of the channel width, velocity and final bed
height variations have changed by given trend, in all the
ratios. Also, increasing in the intersection angle accompanied
by decreasing in flow velocity variations along the channel.
The pattern of velocity and topographical bed variations are
also constant in any studied angles.
Similar to LOWERING GROUNDWATER IN THE ARCHAELOGICAL BABYLON CITY USING UNDERGROUND DAMS (20)
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.