Lingeswaran.P is an instrumentation and control engineer with over 8 years of experience in the power industry. He has expertise in commissioning, operating, and maintaining combined cycle power plants and their critical electrical and instrumentation systems. His resume provides details on his work experience with various power and industrial plants in India and Kuwait, highlighting his responsibilities in testing, commissioning, calibrating, and maintaining different types of field instruments and control systems.
1. LINGESWARAN.P
lingeswaran.p@gmail.com
India : +91-9788030789.
Kuwait: +965-50481766.
OBJECTIVE:
To acquire a position in a power plant sector that affords me the opportunity to bring
my technical expertise, problem solving skills and willingness to learn to make
an organization successful.
PROFESSIONAL SUMMARY:
Around 8 + Years of experience in POWER Industry with a Engineering Degree in
Instrumentation & Control Engineering. Having thorough knowledge and
exposure in areas like and combined cycle power plant Commissioning,
operation & maintenance emergency handling, critical E&I systems of process
plant.
WORKING EXPERIENCES:
Client : Ministry of Electricity & Water (MEW), Kuwait.
EPC, O&M : Alghanim International General Trading &
Contracting co W.L.L.
Role : I&C Engineer (Testing & Commissioning).
Duration : May 2013 to Till
PLANT DETAILS:
In Field commissioning and Operation & Maintenance of combined cycle Power
Plant consists of two groups with the following major equipment in total.
Two Siemens SGT5-4000F (V94.3A) gas turbines for gaseous and liquid fuel
operation, incl. auxiliaries. Two Siemens SGen5-2000 Hydrogen-cooled generators
for gas turbines.
Two Siemens SGen5-2000 Hydrogen-cooled generators for gas turbines.
ST Steam turbine Alstom Make Three Pressure Stage and other accessories.
Two main transformers for transmission of electrical energy to the HV switchgear.
Plant control systems (SPPA-T3000) and ABB Melody 800xA.
Auxiliary’s and equipment (Balance of Plant)
HV gas insulated switchgear (the “Electrical Special Facilities” - ESF)
JOB RESPONSIBILITIES DURING COMMISSIONING:
2. Execution of Commissioning and Functional logic checks by ABB DCS
Advant&Melody system and perform by smart field instruments such as control
valves make for ABB,MESONEILAN,GUIDE,VALVE TEK Related valve positioners
make Fisher,Siemens,ABB,Samsung,Mesoneilan, Flow serve and Governor
valve,Solenoid valve Motorised Valve and On/Off Valves.
I have Commissioned on various types of instruments and different make
calibration, commissioning and maintenance in transmitters (Pneumatic,
Electronics, and Smart) like Pressure,Temperature,Flow,Level and Differential
Pressure for make ROSEMOUNT,FOXBOROW,YOKOGAWA,ABB,and SIEMENS and
I also calibrated Transmitter for new system with 475,375 HART communicator
FF-Foundation Field bus Yokogawa EJA series and ROSEMOUNT 3051
I have Commissioned on different types of level measuring instruments like sight
glass make for CHEMTROLS, float type level indicator, Displacer type level
transmitters make by FOXBORO MASONEILAN Level Radar and Ultrasonic Endrss
Hauser.
I have commissioned on I/P converters ,P/I converters ,Temperature controllers
,pressure switch ,level switch by PID control .Vibration monitoring system make by
Bently Nevada-3300&3500 series.
Nature of work involves:
Was a team member in commissioning and testing of Gas compressor PLC
(Atlas Copco).
Was a team member in commissioning and testing of Fuel Oil Treatment process
plant (GEA).
Worked as a team member for Instrument air PLC (Siemens) & pulse air
compressor PLC (Synergyia).
Worked in ABB melody DCS 800xA operations. Preparation of charts, trends
and sequence of events.
Worked in Siemens S7-400 ET 2000 PLC link commissioning and testing
opearations.
Commissioning of Water Emission Monitoring System (WEMS).
Commissioning of Oil in Water Analyzers 20 PPM, 1500 PPM.
Commissioning of MV and LV Switchgears Breakers.
Commissioning of Demin Water process system by Siemens PLC.
Commissioning and functional logic checks of HRSG, Closed Condensate Cooling
Water system, Treated gas oil system.
Commissioning and functional logic checks of Cooling Tower, Service Water
System, DEMIN Water System, Purge Water System
3. Check valves, Motorized valves and Manual valves wiring checks done and Limit
Switch adjustment for the same was performed.
Calibration, Maintenance and Troubleshooting of compressor & Turbine (SOLAR)
Instruments which included checking of Solenoid Valves, Pressure Switch,
Vibration Probes, Proximeter, Vibration Monitor, RTDs, Thermocouples, Fire &
Gas system etc.
In SCADA system, (Supervisory Control & Data Acquisition) the
operator/supervisor collects alarm/event data from the remotely located RTU/PLC
along the service line. The operator analyzes the data (alarms and SOEs) and takes
action if required. The RTU/PLC is the local control system that works as per the
command received from the supervisory system, except for some specific control
decisions (fire fighting, emergency shutdown) taken locally by the RTU/PLC. The
communication path is wireless, GSM tech., etc.
In Experience with Modbus communication protocol RS 485,TCP/IP
In Familiar with Modbus communication through ABB AC500 PLC.
Local AREA and Wide AREA Networking based on Fiber Optics, Microwave Radio,
Satellite, SCADA system is based on multiple databases
Physical checking of connectivity from field instrumentation to RTU, cards.
Troubleshooting TIJB, RTU.
In DCS (Distributed Control System) the controller itself controls the process. It has
the control loops in the controller. It communicates through the high speed
Ethernet/LAN network. DCS is confined to a single unit or group of local units.
Coordinated with sub-contractors for smooth execution of works as per client &
relevant International Standard requirements.
Projects Worked On:
1. Supply, Erection, Operation & Maintenance of gas turbines to upgrade power
capacity at Az-zour South Power and distillation plant site, Az-Zour Kuwait.
2. 600 MW CCGT-2 HRSG ST Power Project ,Az-Zour South, Kuwait,
3. 500 MW OCGT-09 GT Power Project ,Az-Zour South, Kuwait,
Organization : Electronics Corporation of India ltd (Microtec Engineers Pvt
Ltd),(ECIL).
Role : I&C Engineer (Testing & Commissioning)
Working Area : 2 *1000 MW Kudankulam Nuclear Power Project.
Duration : August 2010 to April 2013.
Client : Nuclear Power Corporation of India Limited (NPCIL).
4. Profile : This project has two units with each of 1000 MW; It is an
International Nuclear Power project in which Design and supply of Equipments
& Instruments by Russian Federation with International coding (KKS) and
standards.
Responsibilities:
Execution of Testing ,Commissioning, Calibration Instruments and panels
Maintenance for Process control system related field Instruments, Control
Valves, Safety Systems and Transmitters
Nature of work involves:
Testing and Commissioning of ESFAS (Engineered Safety Features Actuator
System) Related instruments such pneumatic Valves, process instruments
,pumps and Snubbers.
Testing and Commissioning PHRS (Passive Heat Removal System ).
Laying , Termination and Loop checks/Continuity Checks of Different types
of Control Cables.
Testing and Calibration, Erection, Different Types of Russian make Field
Instruments like pressure (DP,EX,PR), Flow, Level (ultrasonic
level,capacitances,level relay),Temperature(RTD, Thermocouple &
temperature Converter),Gas analyzers(SF6 Gas,O2,N2,CH4)&Conductivity
Instruments.
Wiring checks, functional checks & logic checks were performed in Safety and
Non-Safety systems available in KKNPP.
Safety system panels (ESFAS) which consists of four trains to ensure its
availability and reliability were commissioned. Wiring checks and panel
functional checks were performed for all four trains.
For both safety and non safety systems of KKNPP the Pressure, Level & Flow
transmitter calibration, wiring checks & response checks were performed.
Containment isolation valves, Pneumatic valves were commissioned.
Snubbers for monitoring expansion of primary piping’s were commissioned.
Calibration of Instruments such as RTD’s, Transmitters, Thermocouples,
pressure gauge, temperature gauge , etc.
Maintenance of Calibration Certificates, Preliminary inspection of
Instruments and Equipments along with QA.
Organization : Ericsson India Pvt. Ltd. (Team Lease).
Role : Operation and Maintenance Engineer (GSM Switch).
Client : Bharti (Airtel) Limited, Bangalore.
Duration : April 2009 to August 2010.
5. Nature of work involves:
Ensure Uptime of NSS nodes as per KPI.
Ensure the CP, APG, and CDR backup for MSC, STPS & BSC at regular
intervals.
Handle hardware fault in Ericsson BYB202,BYB501, AXE10, AXE810, APG40
Remote login in case of NMC outage to all traffic nodes on the Network.
Manage Routine Alarms in the Network.
Investigate the alarms, resolve fault & reassurance with NMC
Interact with TSG for Customer Complaints.
Interact with D&P, TAC and NMC for Change requests work order
Organization : Health India Laboratories-(Unit VI Project) ,Chennai.
Role : Instrumentation Engineer.
Duration : July 2008 to March 2009.
Nature of work involves:
Erection and commissioning of Homogenizer, clarifier and heat exchangers.
Erection and commissioning of RO Plant.
Erection and commissioning of steam boiler.
Erection and commissioning of ETP plant.
Measure and control the process parameters using PLC and SCADA to central
command room.
Maintanance of the Automatic Bottle filling system.
Maintain the process using process variables temperature, pressure, level and
flow.
EDUCATION QUALIFICATION:
B.E : Instrumentation & Control Engineering
76%
(Anna University, Chennai)
Diploma : Electronics and Communication Engineering
89%
PERSONAL PROFILE:
Father’s Name : Padmanabhan.
Date of Birth : 27.07.1983
Nationality : Indian
Marital Status : Married
Sex : Male
6. Language Known : English, Hindi, Tamil, Malayalam & Kannada.
Passport No : Z3081314
Address : 13/144, Vinayagar Kovil Street,
Agasteeswaram & post,
Kanyakumari District - 629 701,
Tamilnadu, India.
DECLARTION:
Hereby I declare that all the information given above are true and
correct to the best of my knowledge and belief.
DATE : Yours Faithfully,
(Lingeswaran.P)
7. Language Known : English, Hindi, Tamil, Malayalam & Kannada.
Passport No : Z3081314
Address : 13/144, Vinayagar Kovil Street,
Agasteeswaram & post,
Kanyakumari District - 629 701,
Tamilnadu, India.
DECLARTION:
Hereby I declare that all the information given above are true and
correct to the best of my knowledge and belief.
DATE : Yours Faithfully,
(Lingeswaran.P)