1. Email Address:
Mobile: +917607906920 vishal_dhawan12@yahoo.com
vdhawan86@hotmail.com
Assignments in Project Management /Analysis/Instrumentation with an organization of high
reputed oil and gas industry.
CAREER CONTOUR
Halliburton Offshore Services, Inc. (CAIRN INDIA, RELIANCE)
(Services and Products to upstream Oil and Gas customers) Field Electronic Technician
From JAN’14 to Present
THE ACCOUNTABILITIES:
Responsible for providing all necessary electronic support to the crew, company and customers to
ensure proper performance of all equipment involved in the FRACTURING,COIL TUBING,CEMENTING
and NITROGEN operations and making sure required safety and operational procedures are followed.
Experience in programming, testing, installation, repairing and troubleshooting of all
electromechanical, electrical, and computer-based equipment (ACE) resulting in increased productivity
and less down time.
Diagnosed control system problems using manuals, schematics and various test equipment.
Used SAP maintenance system to log repair, create work orders, fill time sheets, expense report.
Performed preventative maintenance, field repairs and parts ordering.
Coordinated projects with outside vendors to upgrade and replace outdated or malfunctioning
systems in the plant to improve plant performance.
Ensured proper care of spares, tools, test equipment and ensure calibration.
Assist in start-up of new equipment to ensure it meets all instrumentation design specifications.
Extensive experience in all areas of safety training including, but not limited to the
following: Lockout/Tagout, Confined Space, and MSDS procedures.
Dynamic professional with nearly 5 years of rich experience in
planning, managing projects, improving efficiency of operation,
instrumentation and Process Enhancement in oil and gas industry.
Exposure in handling site operations and accountable for quality
service, project planning and development, facility management,
labor utilization analysis, staff training , timely completion of project
& inventory control.
Skills in leading and directing personnel towards accomplishment of a
common goal.
Talent for proactively identifying & resolving problems and ramping
up project activities on time.
An effective communicator with strong analytical, leadership, problem
solving & organizational abilities.
Project Management
Cost control and reduction
Operation & Maintainence
Team Management
Inventory Control
Instrumentation
2. Operations & Maintenance
Troubleshooting and maintenance of FRACTURING, COIL TUBING, NITROGEN and CEMENTING
electromechanical equipment.
Worked on latest 25.02 version ACE software, ability to identify and troubleshoot the problem.
Worked on ACE PUMP, ACE BLENDER, ADP, TCC (Technical command center), MOUNTAIN MOVER,
138K-238K-195K-295K COILCAB, HOT OILER UNIT, NITROGEN UNIT, APR 2000, CEMENTING UNIT
( Elite, batch mixer,75TC4), CRANE.
Calibration, testing, troubleshooting, Installation and maintenance of CAN( control area network)
Pressure transducer, Temperature transducer, Micro-motion(Pro-link HART communicator), Turbine
flow meter, Magnetic flow meter, Radio-Active density meter, Load cell, Optical encoder, Viscometer,
P-H-meter, Level sensor, Murphy gauges, Parker electro hydraulic control valves used in different
equipment.
Knowledge of ACE (Automatic control equipment), FLECS (Flexible electronic control system),
UNIPRO, ASTREK, MC-II FLOW ANALYZER data acquisition system.
Wiring with proper routing, networking and installation of different software (IFS-Insight for
Stimulation, IWI- Insight for Well Intervention required for carrying out Fracturing and Coil tubing
operation).
Ability to repair, test (using process meter) and replace electronic components and devices contained
in the electronics instrument skid of equipment.
Strong skill to use Process meter, Multi meter, Audio generator, Clamp meter, Tachometer,
Oscilloscope used in trouybleshooting.
Ability to make CAT5, Coax, Pressure, Density, Flow, Serial DB cables and connectors.
ENGINES & TRANSMISSION
Ability to troubleshoot on Caterpillar/Detroit/Cummins- (3412,3512B oil well servicing engine),
(C11,C13,C15 On- Highway Engine),(3114,3116,3126 Industrial Engine),( C32 Marine Engine), (C18
Generator).
Worked on Allison Transmission 9000.
Ability to troubleshoot ECM (Electronic Control Module) related problem and different electronic sensor
issues in engine.
Ability to troubleshoot MEUI (Mechanically operated electronically controlled Unit Injectors Fuel
system) System. This system provides variable injection timing and duration to optimize combustion
at any given speed and load.
Focus Energy Limited, Jaisalmer, Rajasthan Instrument Engineer cum
Observer (Oil & Gas Exploration and Production) from JAN’11 to
SEP’13
THE ACCOUNTABILITIES:
Project Management & Instrumentation
Spearheading activities involving working out various requirements & monitoring overall project
operations for ensuring timely completion.
Executing cost saving techniques / measures and modifications to achieve substantial reduction in
O&M expenditures and work within the budget.
Acquiring the seismic 2-D & 3-D raw data and its Q.C using the Aram Aries Software and Hardware.
Project handle of high resolution 3-D Seismic Data Acquisition project of over 3840 active channels in
Jaisalmer Basin (RJ-ON/06 & RJ-ON-2003/2) and handled the crew of 150 persons.
Scheduling and preparing the duty roster for daily field process.
Preparing & Submitting Daily project Report to Head of Department
Operations & Maintenance
Identifying areas of obstruction / defects, conducting troubleshooting, service and repair to rectify the
equipments.
Maintenance and Calibration of the instruments like Geophones, Vibrators (Seismic Source), Net link,
Vib-pro, Aram Aries (Recording Equipment), LVDT, Temp transmitter, Pressure transmitter, Level
transmitter etc.
3. Troubleshooting the Seismic Acquisition Instruments like Geophones, RAM, Telemetry Cables, Analog
cable.
Monthly checkup for leakage test of field Instruments using Hydro Testing method.
Maintenance & troubleshooting in RTM (radio triggering module) PLC operated which is present in
weight drooping system.
Installation of variable frequency drives ABB for controlling the flow of TEG in Dehydration unit
through a 5 HP motor at process plant.
Calibrating pressure gauges with the help of Dead weight Tester and temperature gauges with Dry
block temperature calibrator.
Team Management
Leading, mentoring & monitoring the performance of team members to ensure efficiency in process
operations and meeting of production targets.
Creating and sustaining a dynamic environment that fosters development opportunities and motivates
high performance amongst team members.
Timing Technologies, Hyderabad. Project management
From Oct ’09 to mar’10
THE ACCOUNTABILITIES:
Project Management
Handle projects of police recruitment board at Surat and Agra location successfully completed all the
operations of events like racing, high jump, long jump, shot-put, rope climbing, etc.
Acquire data of all the events using readlite software, Rfid transponder, and electromagnetic mats.
Supervise the other team members and participants for better coordination.
Travel and hotel arrangements.
Maintaining a diary for efficient time planning and keeping records of all the expenses for cost
analysis.
TRAINIGS UNDERTAKEN
Vocational Training in (IIT Kharagpur) on computer network management.
Three months Industrial Automation Training form Sofcon India Pvt. Ltd.
Certification done in LOCKOUT/TAGOUT, H2S, EXPLOSIVE GENERAL AWARENESS, CRYSTALLINE SILICA
AWARENESS, ENVIORNMENTAL AWARENESS, FIRE FIGHTING, RADIATION GENERAL AWARENESS.
Practical Training
PLCs: Siemens (S7-200, S7-300) ,Allen Bradley (Micrologix1000, SLC 5/03), Modicon (TSX Micro
3705),
Basic Ladder & Logic Development
Sourcing & sinking concept
Practical Knowledge of Basic programming instructions
SCADA: Wonderware’s Intouch, Application Development
Process Instrumentation: RTDS, Thermocouples, Level Sensor, Flow sensor Inductive / capacitive
Proximity Sensors (PNP or NPN Type), Photo electric sensors, Relays, Contactors, Thermal
overload relays
Motors/ Starters/ Control Circuits: Induction Motors, Torque/ Speed characteristics, Star Delta
Starters, DOL Starters, Reversing starters.
4. SCHOLASTICS
B.Tech (Electronics and Instrumentation): From Uttar Pradesh Technical University in 2005-09.
MBA (OPERATION MANAGEMENT): From distance learning SYMBIOSIS University.
IT Skills: Well versed with MS – Office, MS DOS, Windows and Internet Applications.
ACADEMIC PROJECTS
“Elevator Control System” using AT89S52 microcontroller, LM 555 timer, infrared sensor, L293D
(motor driver IC}, Seven segment display,12-V dc motor, Bridge rectifier, voltage regulator, capacitor,
transistor, and internal and external switches
“Blind Stick” using infrared sensor, 555 timer, transistor, switches and capacitor.
PERSONAL DOSSIER
Father’s Name : Late Shankar Dhawan
Mother’s Name : Ms. Chamma Dhawan
Date of Birth : Jan 1st 1986
Marital Status : Married
Nationality : Indian
Gender : Male
Language : English, Hindi
Driving license : Yes
Passport numb : J7674866
I hereby declare that the information furnished above is true to the best of my knowledge.
Vishal Dhawan