Rana maqsood alam resume (e&i) and construction
Resume-Sudhin
1. ENGINEER - ELECTRICAL
Sudhin R
+971 0508921446
sudhin.rr@gmail.com
DUBAI
PERSONAL PROFILE
A successful, highly motivated Electrical Engineer with 5 years extensive experience throughout
oil, gas & petrochemical field.
Widely experienced in leading and motivating multi-disciplined workforce with diverse national,
lingual and cultural backgrounds on a wide range of projects.
Flexible, open minded, a natural team leader and player with excellent communication skills at all
levels, with a proven ability to work under extreme pressure in any situation. Experienced in
working in difficult locations and managing remote operations.
QUALIFICATIONS
Member of Institute of Electrical and Technology, IET (2000)
Masters in Technology in Electronics and Communication (2011)
Bachelors of Technology in Electronics and Communication(2008)
NACE 2 level
RESPONSIBILITIES:
Power Transformer Rectifier Design for Cathodic Protection Networks
Solar System Designing for remote areas.
DC and AC system designing of Solar system.
Transformer Testing, Installation & Commissioning
Preparing Inspection Test Plans, BOM, Datasheets, Operational Manuals
Guiding QA/QC for Quality improvements
Experienced in Routine and Functional Testing of Transformers and Rectifiers
Highly skilled in conducting and organizing client FAT, SAT etc.
Familiarized with all type work permit system like,PTW,LOA,Tag In, Tag Out,Cold
Permits & Isolation Permits
Preparing Submittals for Tendering, Getting of Approvals from client
CP system design as per NACE recommendation.
Well experienced in Electrical Load analysis,cable sizing, Protection, and Testing
2. MAJOR TECHNICAL SKILLS
Designing of cathodic protection transformer rectifier as per IEC 60076 Standard.IEC–
60076 Standards.
Conducting of Routine tests of single and Three Phase Power Transformer Such as Winding
Insulation Resistance test, Power Frequency Withstand test, induced over Voltage test,
Vector Group test, Ratio test, No Load test and Short Circuit test use by separate source
power system and follow by IEC-60076 standards.
Issuing Factory Acceptance Testing procedure to clients
Type tests such as Temperature Rise test and Impulse test use by separate source power
system and follow by IEC-60076 standards.
Routine testing by following IEC-99/4 & 282/2 standards respectively.
Implementation of new communication topologies with the help of network modules(Moxa
devices)
Providing technical solutions at site.
Design of Solar System, sizing of batteries charge controllers for desert environments.
Solar System Design for both AC and Dc side
Cable Sizing and Voltage drop calculations and Designing of Protective Earthing methods .
COMMUNICATON TECHNICAL SKILLS
Designing remote monitoring and control for the transformer rectifiers
Expert in Modbus oriented control system for control and power applications.
Designing of Hardware control for the transformer and rectifiers using 4-20mA
communication loop, Ethernet and TCP –IP protocols.
Expert in different communication modules, and networking.
Well experienced in the field of Plant and pipeline communication systems
Familiarized in all types of Moxa Networking solutions
Providing and designing of SCADA solutions for power monitoring and control
TEST KIT FAMILIARISATION
High Voltage Test Kit(Deielectric Testing)
Irradiance meter.
Megger (Insulation Tester)
Primary Injection Tester
Secondary Injection Tester
Ct Analyser
Timer Test Kit
Insulation checking
4 pin resistance measurements
Swain meters
Soil resistivity meters
Interrupter
IT LITERACY
Good all round knowledge of Microsoft Word, Excel, PowerPoint, and Access
Good working knowledge of Microsoft Project
AutoCAD,sales gas to Emal-Extension of Existing 24" & 36" Maqta Taweela gas pipeline
3. CAREER HISTORY:
2010 to 2012 TRANSFORMER TESTING/COMMISSIONING ENGINEER
RACETECH PVT LTD
As testing/commssioning Engineer I started my main Career with M/s Ractech PVT LTD during this period I
was associated with major clients like GASCO,TAKREER,FERTIL,IOC., involved in designing of
Transformer Rectifier Manufacturing , Testing, Installation and commissioning.
Key Job Responsibilities:
Transformer Testing
Technical Proposals, BOQ making
SLD Drawing analysis, transformer sizing, cable sizing, MCB, Fuse, ELCB selection and
design
Representing Company regarding the Transformer Rectifier and communication systems.
Providing technical solutions at site
Testing of Transformer and rectifiers both routine and functional
Organizing Third Party Inspection at factory premises, Conducting both FAT and SAT.
Controlling Production
Supervisng of Installation of Transformers, Wiring
Site Commissioning of Transformers.
CAREER HISTORY
2012 to present Transformer Rectifier and Remote Monitoring Specialist and CP Site Commissioning
BSS TECHNOLOGIES DUBAI
Handled different cathodic protection jobs and commissioning activities associated with oil and gas
industries.it included more than 250 no’s of transformer rectifier out door design and site erection
and commissioning
Job Responsibility:
Designing of New Communication topologies and design documents that suits for the exact
client requirements
Evaluating and verifying the communication related project documents
Providing Testing and Commissioning of remote monitoring for the pipeline projects and in-
plant projects
Representing Company regarding the Transformer Rectifier and communication systems.
Providing technical solutions at site
Providing remote monitoring and control for the transformer rectifiers and its design
Designing Modbus oriented control system for control and power applications.
Development of new software’s and modules for cathodic protection systems.
Designing of Hardware control for the transformer and rectifiers using 4-20mA
communication loop
Providing and designing of SCADA solutions for power monitoring and control
Designing of cathodic protection transformer rectifier as per IEC 60076 Standard.IEC–
60076 Standards.
Conducting of Routine tests of single and Three Phase Power Transformer Such as Winding
4. Insulation Resistance test, Power Frequency Withstand test, induced over Voltage test,
Vector Group test, Ratio test, No Load test and Short Circuit test use by separate source
power system and follow by IEC-60076 standards.
Issuing Factory Acceptance Testing procedure to clients
Type tests such as Temperature Rise test and Impulse test use by separate source power
system and follow by IEC-60076 standards.
Routine testing by following IEC-99/4 & 282/2 standards respectively.
Organizing and Conducting Factory Acceptance Test and demonstration in front of Clients
Design of Communication topology for the monitoring of Transformer rectifier installed in
the plants and pipelines.
Datasheets and BOM making for the systems.
Designing of new testing schemes with respect to the clients requirements.
Assisting the commissioning team in troubleshooting
Performing site acceptance tests
Assisting IFAT at client premises.
Designing of new Anode Junction Boxes
Solar system design for CP systems
Major Projects Handled:
1. Cathodic Protection System for Oil Tank for Taweelah Power Station Project
2. Cathodic Protection System for Musandam Interconnect Gas Pipeline (MIGP) Project
3. CP for Salalah International Airport
4. Cathodic Protection System for 6" Jet Fuel Pipeline for Al Dhafra Airbase Project UAE
5. Cathodic Protection System for Port of Fujairah OT2 Phase 2 Civil/Marine Project
6. Cathodic Protection System for Qatargas Waste Water Treatment Plant Project
7. Supply of 75V/100A Transformer Rectifier for Kuwaith Oil Compny
8. Cathodic Protection Syatem for Sufyan EPF project
9. Supply and Installation of CP System for ELOMP Phase-III Expansion project
10. Upgradation of Anodes for Cooling Tower Base Slab, Pump Basin & Inlet Duct Zone
11. Cathodic Protection For Uunderground Pipelines in Taif
12. Provision of EPC Services For Sufyan EPC Project
13. Cn/14/256 -Supply and Installation of Gas & Air Lines In Sharjah
EARLY CAREER HISTORY
2008 TO 2009 ELECTRICAL ENGINEER UNITED TELECOM LIMITED
BANGALORE,INDIA
Handled the installation of BTS, Diesel Generators, and Integration of the BTS with Substations /
Transformers.
PERSONAL DETAILS
Date of birth Nationality Passport Status
03 MARCH 1987 INDIAN INDIA Married
Visa Status State
Residence UAE Visa KERALA]