This document proposes a petrol bunk automation system using prepaid cards and GSM communication. The system uses RFID to read prepaid cards at the entrance gate and allows entry only for valid cards. It displays the card balance and prompts the user to select an amount of fuel to dispense by litres or rupees. If the selection does not exceed the balance, a motor is actuated to dispense the fuel. The remaining balance is then sent via text message to the user's mobile phone using GSM technology. Hardware requirements include a microcontroller, sensors, power supply, and actuators. The system aims to automate transactions and provide real-time updates to improve the customer experience at petrol bunks.
PETROL BUNK AUTOMATION WITH PREPAID CARDS & GSM COMMUNICATIONKrish'n Yadav
Automated have added to the new look of the petrol bunks. A drastic change which has taken the city by storm is the petrol machines that have invoked a new look with automated systems invading this area also. Now one can get updated details on the mobile using the cutting edge GSM Technology. This makes the customers know the exact quantity of petrol that has to be filled in, getting over the perennial problem of forgoing small change which most of the times the attendants at the bunks pocket for themselves. The traditional archaic pumps have now been replaced by more advanced EMP Petrol Pumps for proper filling of fuel. This not only ensures accuracy, but also saves a lot of time for customers and avoids misconceptions and arguments. To demonstrate this as a project we have developed a PIC Micro controller based Petrol bunk automation system.
The use of 3D printing is gradually increasing and the technologies developed in the 3D printing also increases. This presentation is about the various technologies present the market.
https://technoelectronics44.blogspot.com/
Provide below benefits to parents
1. Provides peace of mind
2. To keep your family safer.
3. Makes Journeys safer
4. Allows children more freedom
Child tracking IOT with NEO6M-GPS full project report, it is implemented by using the NODEMCU controller, neo-6m GPS module with IoT technology to performs child tracking applications.
PETROL BUNK AUTOMATION WITH PREPAID CARDS & GSM COMMUNICATIONKrish'n Yadav
Automated have added to the new look of the petrol bunks. A drastic change which has taken the city by storm is the petrol machines that have invoked a new look with automated systems invading this area also. Now one can get updated details on the mobile using the cutting edge GSM Technology. This makes the customers know the exact quantity of petrol that has to be filled in, getting over the perennial problem of forgoing small change which most of the times the attendants at the bunks pocket for themselves. The traditional archaic pumps have now been replaced by more advanced EMP Petrol Pumps for proper filling of fuel. This not only ensures accuracy, but also saves a lot of time for customers and avoids misconceptions and arguments. To demonstrate this as a project we have developed a PIC Micro controller based Petrol bunk automation system.
The use of 3D printing is gradually increasing and the technologies developed in the 3D printing also increases. This presentation is about the various technologies present the market.
https://technoelectronics44.blogspot.com/
Provide below benefits to parents
1. Provides peace of mind
2. To keep your family safer.
3. Makes Journeys safer
4. Allows children more freedom
Child tracking IOT with NEO6M-GPS full project report, it is implemented by using the NODEMCU controller, neo-6m GPS module with IoT technology to performs child tracking applications.
This is the seminar report of my presentation
Link for the pressentaion file is
http://www.slideshare.net/arjunrtvm/3d-printing-additive-manufacturing-with-awesome-animations-and-special-effects
In highly populated countries, people lose their lives because of accidents and poor emergency facilities every day. These lives could have been saved if medical facilities are provided at the right time. This thesis implies a system which is a solution to this drawback, when a vehicle meets with an accident immediately, accelerometer module detects the signal, and it is sent to the Arduino microcontroller programmed by C programming language. Arduino sends an alert message through the GSM module including the location to the police station or a rescue team. So the police can immediately trace the location through the GPS modem after receiving the information. LCD is used to display location message from GPS module. The system is simulated and practically designed by the use of required hardware components and the results are satisfied with the expectation. Yu Yu Mon Win | Moe Myint Aung | Thin Thin "Accident Detection System using Arduino Uno" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27840.pdfPaper URL: https://www.ijtsrd.com/computer-science/other/27840/accident-detection-system-using-arduino-uno/yu-yu-mon-win
this is a simple way to help ambulance to reach hospital on time. this is just an idea . this will be ececuted if i am done with maximum number of queries .
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
This is the seminar report of my presentation
Link for the pressentaion file is
http://www.slideshare.net/arjunrtvm/3d-printing-additive-manufacturing-with-awesome-animations-and-special-effects
In highly populated countries, people lose their lives because of accidents and poor emergency facilities every day. These lives could have been saved if medical facilities are provided at the right time. This thesis implies a system which is a solution to this drawback, when a vehicle meets with an accident immediately, accelerometer module detects the signal, and it is sent to the Arduino microcontroller programmed by C programming language. Arduino sends an alert message through the GSM module including the location to the police station or a rescue team. So the police can immediately trace the location through the GPS modem after receiving the information. LCD is used to display location message from GPS module. The system is simulated and practically designed by the use of required hardware components and the results are satisfied with the expectation. Yu Yu Mon Win | Moe Myint Aung | Thin Thin "Accident Detection System using Arduino Uno" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27840.pdfPaper URL: https://www.ijtsrd.com/computer-science/other/27840/accident-detection-system-using-arduino-uno/yu-yu-mon-win
this is a simple way to help ambulance to reach hospital on time. this is just an idea . this will be ececuted if i am done with maximum number of queries .
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
FREE INPLANT TRAIINING FOR ENGINEERING STUDENTS EEE/BIOMEDICAL/ECEASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.Introduction
b.Basic Components identification: 4 Hrs
2. Basic Components Assembling and Soldering Training
a.General Purpose Board Assembling
b.Soldering Training
c.PCB Assembling And Training: 4 Hrs
3. Orcad Practice for Circuit Designing: 3 Hrs
4. Introduction to Embeded Systems
a.Introduction to Basics of Embedded
b.Microchip’s PIC16F877 Controller: 3 Hrs
5. Learning Embedded System Peripherals
a.Architecture
b.Timers, Interrupts, I/O Lines
c.LED LCD Interfacing :4 Hrs
6. Interfacing of extended Peripherals
a.Stepper Motor Interface
b.Rs232 Interface: 4 Hrs
7. Introduction to Sensors and Interfacing methods
a.Intruder SENSOR
b.Metal (Bomb Detector)
c.Vibration and Glass breaking
d.Smoke Sensor
e.Direction (NEWS) Sensor :3 Hrs
8. Sample Project Testing
a.Mini Sample project Testing
b.ADC and Digital I/O With PC Inteface: 5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.Introduction
b.Variables And Operators
c.Conditional Statements
d.Loops
e.Datatypes (Arrays and Structures)
f.String Access :2 Hrs
2. ‘C’ Language – Interface with Hardware
a.Functions
b.Standard and Userdefined functions
c.Hardware interfacing Functions (Inport and Outport):2 Hrs
3. Visual Basic 6.0 – Basic
a.3. Visual B
BIOMEDICAL PROJECT SYNOPSIS&ABSTRACT: Automatic anesthesia controller using h...ASHOKKUMAR RAMAR
PROJECT CENTER TAMBARAM,PROJECT CENTER GUINDY, PROJECT CENTER PALLAVARAM, PROJECT CENTER VELACHERRY, PROJECT CENTER CHROMPET, PROJECT CENTER VADAPALANI,PROJECT CENTER CHENNAI,
FINAL YEAR PROJECT ABSTRACT:Automated environmental friendly vechicle system ASHOKKUMAR RAMAR
PROJECT CENTER TAMBARAM,PROJECT CENTER GUINDY, PROJECT CENTER PALLAVARAM, PROJECT CENTER VELACHERRY, PROJECT CENTER CHROMPET, PROJECT CENTER VADAPALANI,PROJECT CENTER CHENNAI,
Windows Based Petrol Pump Management Software.
Simple, Reliable and User Friendly to Operate.
Easy to Use, Quick Entry, Quick Reporting & Fast Printing.
Online in depth help.
Data Base Back up for Security reason.
Design and Implementation of Alcohol Detector and Accident Detection System u...ijtsrd
Nowadays, the number of vehicles is increasing significantly every year. Many accidents are occurring because of the alcohol consumption of the driver. After drinking alcohol, driving is the most reason for accidents in almost all countries all over the world. Therefore, alcohol detection system and automatic finding car accident place using GSM modem and GPS are presented in this paper. The combination purpose of alcohol detection and car accident detection systems is to save human life. If the car driver drinks alcohol, the alcohol sensor will sense alcohol concentration, will display it on the LCD and will turn off the car engine. In the accident detection system, the vibration sensor senses vibration when an accident occurs. If the sensor senses the car accident, the vibration sensor will give the digital output to the microcontroller. By using the GPS module, the latitude and longitude of the place where the accident happened are sent by message to the assigned phone number through the SIM900 GSM Modem. By implementation of this system, human beings can be protected from harm and other non desirable outcomes on road accidents. Daw Khaing Zar Win "Design and Implementation of Alcohol Detector and Accident Detection System using GSM Modem" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26595.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26595/design-and-implementation-of-alcohol-detector-and-accident-detection-system-using-gsm-modem/daw-khaing-zar-win
Unlike an existing system for Fuel Level Monitoring, it differs by monitoring the fuel level and provide the access to monitor the vehicle in any place with the use of (IOT). Automatically updates the information of Fuel entering inside the tank. Main Purpose of This Device Is to Prevent Fraud in Refueling Station where in some cases the quantity of fuel displayed in the filling machine is not actual quantity of fuel entering inside the tanks & FUEL THEFT INDENTIFICATION USING (IOT).
Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
Vehicle Monitoring and Tracking System based on ARM7 and Android ApplicationIJMTST Journal
A vehicle monitoring and tracking system gives the better solutions in the security issues of various applications. Based on ARM7 and android application is designed and implemented for monitoring the vehicle based on location. Security to this system can be provided using finger print module for authentication purpose. The vehicle will be started only when the authorized person enters into the vehicle and provides finger print to biometric device so that by using this authentication process we can avoid misusing of vehicle and thefts. The GPS is a one of location reorganization technology that is used in several applications. GPS is also used for vehicle tracking and monitoring. The tracking system of our proposed system informs the location and route travelled by vehicle and also the GSM technology is used for sending alert message to mobile. In our proposed system we are making use of LPG Gas leakage sensor MQ2 and temperature sensor LM35 to provide a safety for the travelers.
PROJECTS SYNOPSIS BIOMEDICAL:Bed side patient monitoring system with automati...ASHOKKUMAR RAMAR
PROJECT CENTER TAMBARAM,PROJECT CENTER GUINDY, PROJECT CENTER PALLAVARAM,
PROJECT CENTER VELACHERRY, PROJECT CENTER CHROMPET, PROJECT CENTER VADAPALANI,PROJECT CENTER CHENNAI,
FINAL YEAR PROJECTS TAMBARAM,BEST PROJECT CENTER TAMBARAM,EMBEDDED SYSTEM PROJECTS, EMBEDDED PROJECTS TAMBARAM,
IEEE PROJECTS, IEEE PROJECTS TAMBARAM,
FREE INPLANT TRAINING ECE CHENNAI-T.NAGAR/KODAMBAKKAMASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.Introduction
b.Basic Components identification: 4 Hrs
2. Basic Components Assembling and Soldering Training
a.General Purpose Board Assembling
b.Soldering Training
c.PCB Assembling And Training: 4 Hrs
3. Orcad Practice for Circuit Designing: 3 Hrs
4. Introduction to Embeded Systems
a.Introduction to Basics of Embedded
b.Microchip’s PIC16F877 Controller: 3 Hrs
5. Learning Embedded System Peripherals
a.Architecture
b.Timers, Interrupts, I/O Lines
c.LED LCD Interfacing :4 Hrs
6. Interfacing of extended Peripherals
a.Stepper Motor Interface
b.Rs232 Interface: 4 Hrs
7. Introduction to Sensors and Interfacing methods
a.Intruder SENSOR
b.Metal (Bomb Detector)
c.Vibration and Glass breaking
d.Smoke Sensor
e.Direction (NEWS) Sensor :3 Hrs
8. Sample Project Testing
a.Mini Sample project Testing
b.ADC and Digital I/O With PC Inteface: 5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.Introduction
b.Variables And Operators
c.Conditional Statements
d.Loops
e.Datatypes (Arrays and Structures)
f.String Access :2 Hrs
2. ‘C’ Language – Interface with Hardware
a.Functions
b.Standard and Userdefined functions
c.Hardware interfacing Functions (Inport and Outport):2 Hrs
3. Visual Basic 6.0 – Basic
a.3. Visual B
FREE INPLANT TRAINING CHENNAI FOR ENGINEERING STUDENTSASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.Introduction
b.Basic Components identification: 4 Hrs
2. Basic Components Assembling and Soldering Training
a.General Purpose Board Assembling
b.Soldering Training
c.PCB Assembling And Training: 4 Hrs
3. Orcad Practice for Circuit Designing: 3 Hrs
4. Introduction to Embeded Systems
a.Introduction to Basics of Embedded
b.Microchip’s PIC16F877 Controller: 3 Hrs
5. Learning Embedded System Peripherals
a.Architecture
b.Timers, Interrupts, I/O Lines
c.LED LCD Interfacing :4 Hrs
6. Interfacing of extended Peripherals
a.Stepper Motor Interface
b.Rs232 Interface: 4 Hrs
7. Introduction to Sensors and Interfacing methods
a.Intruder SENSOR
b.Metal (Bomb Detector)
c.Vibration and Glass breaking
d.Smoke Sensor
e.Direction (NEWS) Sensor :3 Hrs
8. Sample Project Testing
a.Mini Sample project Testing
b.ADC and Digital I/O With PC Inteface: 5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.Introduction
b.Variables And Operators
c.Conditional Statements
d.Loops
e.Datatypes (Arrays and Structures)
f.String Access :2 Hrs
2. ‘C’ Language – Interface with Hardware
a.Functions
b.Standard and Userdefined functions
c.Hardware interfacing Functions (Inport and Outport):2 Hrs
3. Visual Basic 6.0 – Basic
a.3. Visual B
ECE INPLANT TRAINING ECE/ECE/ECE INPLANT TRAINING CHENNAIASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
Ha
BEST INTERNSHIP TRAINING FOR ENGINEERING STUDENTS-CHENNAI-ECE/E&I/BIOMEDICAL/CSEASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
Ha
INPLANT TRAINING FOR ENGINEERING STUDENTS CHENNAI-ELECTRONICS -ECEASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
Ha
INTERNSHIP TRAINING CERTIFICATE CHENNAI-MAASTECH COMPANYASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
Ha
INPLANT TRAINING CERTIFICATE FOR INDUSTRY PRODUCT MANUFACTURER CHENNAIASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
Ha
INPLANT TRAINING FOR ECE/EEE/CSE/E&I/BIOMEDICAL ENGINEERINGASHOKKUMAR RAMAR
MAASTECH OFFER BESTINPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
ECE INPLANT TRAINING CHENNAI-INPLANT TRAINING ECEASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functions
c.
Ha
BEST INPLANT TRAINING CENTER CHENNAI-BEST INTERNSHIP TRAININGASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functio
BEST INPLANT TRAINING CENTER IN CHENNAI-INTERNSHIP TRAININGASHOKKUMAR RAMAR
MAASTECH OFFER INPLANT TRAINING PROGRAMME CONDUCTED FOR PRE-FINAL YEAR STUDENTS
B.E/B.TECH (ECE, EEE, E&I, ICE, CSE, IT & Biomedical)B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
IPT FIELD-ROBOTICS PROGRAMMING, EMBEDDED PROGRAMMING, JAVA,.NET,
HARDWARE INTERFACE TO SOFTWARE(PC)
BASIC ELECTRONICS AND ELECTRICAL CLASSES
BASIC EMBEDDED SYSTEMS WITH HITECH "C"
SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING
SENSOR, TRANSDUCER IDENTIFIACTION AND WORKING
EMBEDDED SYSTEMS INTERFACING TO REAL WORLD
ORCAD PRACTICE FOR CIRCUIT DESIGN
STUDENTS INVOLVED IN LATEST R&D PRODUCTS
GSM,GPS and ROBOTICS Application Kits
C,VB6.0,RS232,RS485,TCP/IP (PC INTERFACE)
HOW TO MAKE MINI/MAIN PROJECTS
NOTE:
Students should bring their bonafide certificate from their college.
IPT Certificate will be given at the end of Training period
............................................................................................................................
......................................................TOP
Inplant Training Programme on Embedded Systems B.E/B.TECH
(ECE, EEE, E&I, ICE, CSE, IT & Biomedical)
B.SC. ELECTRONICS ,M.SC. ELECTRONICS &DIPLOMA
Details
Total Hrs 30
1. Electonics Compnents Identification
a.
Introduction
b.
Basic Components identification
4 Hrs
2. Basic Components Assembling and Soldering Training
a.
General Purpose Board Assembling
b.
Soldering Training
c.
PCB Assembling And Training
4 Hrs
3. Orcad Practice for Circuit Designing
3 Hrs
4. Introduction to Embeded Systems
a.
Introduction to Basics of Embedded
b.
Microchip’s PIC16F877 Controller
3 Hrs
5. Learning Embedded System Peripherals
a.
Architecture
b.
Timers, Interrupts, I/O Lines
c.
LED LCD Interfacing
4 Hrs
6. Interfacing of extended Peripherals
a.
Stepper Motor Interface
b.
Rs232 Interface
4 Hrs
7. Introduction to Sensors and Interfacing methods
a.
Intruder
b.
Metal (Bomb Detector)
c.
Vibration and Glass breaking
d.
Smoke Sensor
e.
Direction (NEWS) Sensor
3 Hrs
8. Sample Project Testing
a.
Mini Sample project Testing
b.
ADC and Digital I/O With PC Inteface
5 Hrs
............................................................................................................................
......................................................TOP
In -plant training programme for B.E/B.TECH(CSE/IT)BCA,MCA,M.SC IT
.
Portions Covered
Total Hrs 20
1. ‘C’ Language Basics
a.
Introduction
b.
Variables And Operators
c.
Conditional Statements
d.
Loops
e.
Datatypes (Arrays and Structures)
f.
String Access
2 Hrs
2. ‘C’ Language – Interface with Hardware
a.
Functions
b.
Standard and Userdefined functio
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
latest ieee projects for ece-petrol bunk automation with prepaid cards and gsm communication
1. EMBEDDED SYSTEM MOBILE COMMUNICATION
PETROL BUNK AUTOMATION WITH PREPAID CARDS AND GSM
COMMUNICATION
ABSTRACT:
Automated have added to the new look of the petrol bunks. A drastic change which
has taken the city by storm is the petrol machines that have invoked a new look with
Automated systems invading this area also. Now one can get updated details on the mobile
using the cutting edge GSM TEchnology. This makes the customers know the exact quantity
of petrol that has to be filled in, getting over the perennial problem of forgoing small change
which most of the times the attendants at the bunks pocket for themselves. The traditional
archaic pumps have now been replaced by more advanced EMP Petrol Pumps for proper
filling of fuel. This not only ensures accuracy, but also saves a lot of time for customers and
avoids misconceptions and arguments. To demonstrate this as a project we have developed a
PIC Micro controller based Petrol bunk automation system.
EXISTING SYSTEM:
Previously, In Petrol Bunk we gave amount manually as per the quantity of fuel filled in
automobiles. Smoking at Petrol Bunk may leads to a Major accident. There is no sensor
availability for found out the smoking status.Infra red light reader facility is a must one but it
is not followed in existing method. Because of this reader we can easily found out the vehicle
which drop over at petrol bunk in night time.
PROPOSED SYSTEM:
Each vehicle is fitted with a prepaid card. When a car has arrived at the gate, the
RFID reader reads the card and opens the gate, only when the card is a valid card. Once
entered the user will be shown the balance amount available on the card and he must select a
option to dispense the fuel based on litres or rupees. The system should check whether the
user has entered a valid data i.e., the amount should not exceed the balance available in the
2. EMBEDDED SYSTEM MOBILE COMMUNICATION
card. After ensuring that, a motor is actuated to dispense the fuel. Once this is done, the
information such as available balance is sent to the user’s mobile phone using GSM
technology.
BLOK DIAGRAM:
TRANSMITTER SECTION:
Micro
Controller
Smoke
Sensor
Motor 1Relay
Power Supply Unit
Step down
Transformer
(230 to 12v AC)
Bridge
Rectifier
Filter
Circuit
Voltage
Regulator (IC
7805)
A
D
C
Infrared
Level Sensor
sensor
Relay Motor 2
Engine Switch
Keypad
LCD
display
TAG
3. EMBEDDED SYSTEM MOBILE COMMUNICATION
HARDWARE REQUIREMENTS
Micro controller
Infrared sensor
Smoke sensor
ADC
Power supply
Keypad
Engine Switch
Relay
Motor
SOFTWARE REQUIREMENTS
Embedded C
mplab complier