Kisanga kalema is an electrical engineer from the DRC with over 20 years of experience working on large industrial projects in South Africa and internationally. He has extensive experience as an electrical supervisor and QA/QC inspector overseeing the installation, testing and commissioning of electrical systems. Some of the key projects he has worked on include projects for Sasol, Exxaro Coal Mine, Kusile Power Station and Ambatovy Nickel Project. He has strong skills in project management, quality control and safety compliance.

1. CURRICULUM VITAE
OF
Kisanga kalema
1. PERSONAL INFORMATION
Address: 88 st George.
Cnr lever rd and George rd
Midrand johannesburg
Nationality : Congolese
E-mail address: kisangakalema@gmail.com
Contact Number: 0738326336
0764763090 {Alternative}
Home languages: French
Other languages: English
2. EDUCATIONAL BACKGROUND
2.1 Tertiary education: DRCongo University of Technology
1996-2000
Course: Electrical Engineering (Heavy current)
National Diploma
2.2 Johannesburg Technical College Industrial electronics 2000-2001
National certificate
2.3 Institute technical of CONGO senior certificate matriculate
1990-1996
2.4 Computer literacy: M S office, Excel, Power point,
introduction to PLC
2.5 Training: Quality Assurance and Quality
Control
ISO 9001 Auditors training
Working at height certificate
3. WORKING HISTORY

2. Company: B&W instrumentation and electrical limited.
Project name: Sasol utility expansion project
(S.U.E.P). Sasolburg site
Position: electrical supervisor
Duration: From: 04 July2012 up to date
Key responsibilities:
 Assist Project Manager with the compiling of Scope of work.
 Process Appointments and assure adherence to Legal requirements
Of Contractors.
 Ensure task completion is aligned with critical project constraints:
Time; Cost; Quality; Adherence to Scope of Work.
 Ensure site supervision
 Verification that company procedures and process are being implemented in
accordance with the project quality program and the company integrated
management system (IMS).
 Responsible of all the new substations installation.
 Lighting installation of conveyor, crushers, water process
 Responsible of glanding and terminations of isolators motors. Installations of the UPS
for change over and Instrument
 Renovations of Old Jigs Plant.
 cable joints, cable faulty finding, termination of distribution board & wiring, fault
finding, identification of motors, motors testing, motors connections.
 Issuing, acceptance and signing of on various permits such as:
 Intelli /excavating / hot permits.
 Order, accept and arrange basic consumables or free issue items.
 Responsible for progress measurements, timely and accurate
Feedback.
 Adhere to the SHEC programs at all times (toolbox talks, audits etc..)
All incidents and accidents are reported immediately to the
Superintendent according to set procedures. All necessary SHEC
precautions are taken to ensure accident free hours (pre-shift
inspections, brakes etc). Personal protective equipment is worn at
all times. Tools and equipment is inspected daily prior to being
used, according to SHEC practices and statutory requirements. The
work area is cleaned and the environment restored to its original
state after completion of a job.
 Follow-up on deliveries of free-issue equipment.
 New earthing installations on the Screening and Beneficiation substations from the
transformer’s bays to the substation.
 Controlling and inspecting all earthing drawings.

3. Company: Wade Walker Electrical & instrumentation
Engineers & Contractors.
Exxaro coal mine in Limpopo (site)
Project name: Grootegeluk Medupi Expansion
Project. (GMEP)
Position: Electrical supervisor
Duration: From: 01 July. 2011 to 29 June 2012
Key responsibilities:
 Assist Project Manager with the compiling of Scope of work.
 Process Appointments and assure adherence to Legal requirements
Of Contractors.
Ensure task completion is aligned with critical project constraints:
Time; Cost; Quality; Adherence to Scope of Work.
 Ensure site supervision
 Site Control and Supervision
 Verification that company procedures and process are being implemented in
accordance with the project quality program and the company integrated
management system (IMS).
 Responsible of all the new substations installation.
 Lighting installation of conveyor, crushers, water process
 Responsible of glanding and terminations of isolators motors. Installations of the UPS
for change over and Instrument
 Renovations of Old Jigs Plant.
 cable joints, cable faulty finding, termination of distribution board & wiring, fault
finding, identification of motors, motors testing, motors connections.
 Issuing, acceptance and signing of on various permits such as:
 Intelli /excavating / hot permits.
 Order, accept and arrange basic consumables or free issue items.
Responsible for progress measurements, timely and accurate Feedback.
 Adhere to the SHEC programs at all times (toolbox talks, audits etc..)
All incidents and accidents are reported immediately to the
Superintendent according to set procedures. All necessary SHEC
Precautions are taken to ensure accident free hours (pre-shift
Inspections, brakes etc). Personal protective equipment is worn at all times.
 Tools and equipment is inspected daily prior to being
used, according to SHEC practices and statutory requirements. The
work area is cleaned and the environment restored to its original

4. state after completion of a job.
 Follow-up on deliveries of free-issue equipment.
Company: Kentz Engineers & Contractors
Kusile Power Station (site)
Project name: Kusile Power Station project
Position: Electrical supervisor
Duration: From October 2008 to 15 June 2011
Key responsibilities:
 Verification that company procedures and process are being implemented in
accordance with the project quality program and the company integrated
management system (IMS).
 Responsible of all the new substations installation.
 Lighting installation of conveyor, crushers, water process
 Responsible of glanding and terminations of isolators motors. Installations of the UPS
for change over and Instrument
 Renovations of Old Jigs Plant.
 cable joints, cable faulty finding, termination of distribution board & wiring, fault
finding, identification of motors, motors testing, motors connections.
 Issuing, acceptance and signing of on various permits such as:
 Intelli /excavating / hot permits.
 Order, accept and arrange basic consumables or free issue items.
 Responsible for progress measurements, timely and accurate
Feedback.
 Adhere to the SHEC programs at all times (toolbox talks, audits etc..)
All incidents and accidents are reported immediately to the
Superintendent according to set procedures. All necessary SHEC
precautions are taken to ensure accident free hours (pre-shift
inspections, brakes etc). Personal protective equipment is worn at
all times. Tools and equipment is inspected daily prior to being
used, according to SHEC practices and statutory requirements. The
work area is cleaned and the environment restored to its original
state after completion of a job Follow-up on deliveries of free-issue equipment.
 Assist Project Manager with the compiling of Scope of work.
 Process Appointments and assure adherence to Legal requirements
Of Contractors.
Ensure task completion is aligned with critical project constraints:

5. Time; Cost; Quality; Adherence to Scope of Work.
 Ensure site supervision
 Site Control and Supervision
Company: Tubular Electrical & Instrumentation
International Ferro metal (site)
Position: Electrical QA/QC inspector
Duration: June 2008 to September 2008
Key responsibilities:
 Verification that company procedures and process are being implemented in
accordance with the project quality program and the company integrated
management system (IMS).
 Inspection of all electrical installations, cables testing, lightings, electrical
motor etc….
 Identify any problems and difficulties encountered.
 Attend all necessary inspections as identified in the approved inspection and
test plan (ITP).
 Preparation, co-ordination and approval of procured quality operating plans.
 Inspect and megger cables, pumps on the reel prior to installation.
 Inspect all MCC panel, UPS panel, PLC panel, from the manufacture before
installation to substation, verifier all testing certificate
 Evaluate the validity and acceptability of inspection results.
 Installations, maintenances and commissioning of electrical equipment.
 Adherence to all procedures and specifications.
 Participation in critical analysis meetings, generating and closing action plans.
 Liaise with clients, suppliers and contractors on quality matters.
 Compiling the inspection and the test plan.
 Compile project reports, prepare project specification procedures and work
instruction.
 Review and approve project data books.
 Review quality records and identify recurring problems areas (Trends)
 Liaise with clients, suppliers and contractors on quality matters
 Adherence to all procedures and specifications
 Making sure that grounding installations and termination to equipment’s
conform to project standard drawings and specifications.
 Record, keeping of all tests results, reports, documentation and revisions on
build drawings, completion of form No. 6Qs, 7Qs and commissioning.
 Evaluate the validity and acceptability of inspection results.

6. Company: B&W instrumentation and electrical limited
Ambatovy nickel project Madagascar (site)
Position: Electrical QA/QC Inspector
Duration: February 2006 to May 2008
Company: ACTOM (Alstom)
Position: Switchgear tester technician Supervisor
Duration: January 2004 to December 2005
Key Responsibilities:
 Testing, installation, maintenance and commissioning.
 Operating and wiring of all switchgears and networks, panels, control panels,
high, medium and low voltage panels.
 Testing of vacuum circuit breaker, ring main unit, voltage and current
transformers, mini substations, generators, bus bars, breakers, dog box, and
isolators.
 Construction of HV AC.
 Final inspection on the units.
 Sales of LV, MV HV and other electrical equipments.
 Good knowledge of LV,MV,HV equipments
 Good knowledge of automation and operating three –phase test set in order to
do primary and secondary injection on protection equipment.
 Good knowledge of plc and scales and inverters.
 Low Voltage motor starting panels.
 Knowledge of Medium Voltage motor starting panels.
 Good knowledge of Variable, speed drives for slip ring motors typically 3-
5MW, using liquid rotor controllers.
 Knowledge of Liquid resistance motor starters for slip ring motors.
 Knowledge of Local assembly of Nokian low voltage capacitors.
 Knowledge of Low Voltage Power Factor Correction and harmonic filter
equipment.
 Knowledge of Medium voltage Power Factor Correction and harmonic filter
equipment.
Company: Goldfield Mining (Limpopo)

7. Position: Underground Electrician
Duration: July 2003 to December 2003
Key Responsibilities:
 Maintenance of underground distribution cables, transformers, panels etc..
 Changing the underground cable PILC and XPLE type.
 Trackless machinery and conveyer systems.
 Supervising and maintaining of PLC equipment.
Company: Condra Crane (Alberton)
Position: Electrician
Duration: January 2003 to June 2003
Key Responsibilities:
 Wiring all types of control panels and cranes
 Fixing breakdown and services. wiring all types of remote control, wiring of
demac direction line starter.
 Wiring and set the parameters of all types AC and DC variable speed drives
 Weg CFW08, CFW09, Sew Euro Drive, Invertek Optidrives as well as Electrical
soft start controllers.
4. SAFETY AND QUALITY RESPONSIBILITIES
Maintain standard of safety and comply with company s health, safety & environment
Management system requirements. Take reasonable care of one sown health and safety
And that of others in the work place. Follow and maintain company standards of
quality
In accordance with company quality system requirement
5. EMPLOYMENT MOTIVATION
To be able to offer the best and latest electrical engineering knowledge and technology
know-how, to move hand in hand, to contribute to the progress and productivity of
the company in order to improve the quality of the service as well as efficiently.
6. REFFERENCES
6.1 B&W instrumentation and electrical limited.
Contact number: (011)907-1663

8. Mr.: Adrian, Project Manager.
6.2 Wade Walker electrical & instrumentation. Engineers & contractors.
Contact number: tel: (011) 466-0374
Mr.: Dieter Textores Project Manager
Cell: 0735860329
MR Henry mvanza Construction Manager
Cell: 0742829057
6.3 Kentz Electrical & instrumentation. Engineer & constructors South Africa.
Contact number. Tel (011) 203-9600
Mr.: C Kola Construction Manager
Cell: 0723048130
6.4 B&W instrumentation and Electrical Limited.
Mr. van zil card HR manager b&w Madagascar
Contact number: +26134 260021
Mr. Alfie dunnis electrical QA/QC supervisor b&w Madagascar ambatovy nickel
project
Contact number:+261 33 787 7965
Mr. Hanris electrical QA/QC manager b&w Madagascar ambatovy nickel project
Contact number: +26134 413 2036
6.5 Tubular electrical & instrumentation
Contact no: (011)553-2000
Mr. Roger Lemair. Electrical superintendent
Cell No: 0784614746
6.6 Mr. Patrick Lenda
Switch gear And High Voltage Testing Department Manager: ACTOM
Contact Number: 0114526388 / 0760393947
6.7 Mr. Andriuss
Technical Manager: GOLDFIELD MINING
Contact Number: 0724532675