Khaled El-Hag Ahmed Mohamed Zaki provides his contact information and qualifications in electrical engineering and instrumentation. He received a B.S.c in Electrical Engineering from Alexandria University in 2008 and a Master's degree in Communication and Electronics from the same university in 2014. He has over 5 years of experience as an Electrical and Instrumentation Projects Engineer and is currently working as an Instrumentation and Control Systems Engineer at Abu Qir Petroleum Company. His responsibilities include engineering, installation, testing, and commissioning of electrical, instrumentation, and control systems projects in Egypt's oil and gas industry.

1. Khaled El-Hag Ahmed Mohamed Zaki
Contact Information
Home Address 36 Khalil Motran St. - Saba Basha
CITY/ COUNTRY Alexandria/EGYPT
Phone +2 03 5842069
Mobile +2 01019699169 OR +2 01210050620
E-mail address khaled.elhag76@gmail.com
Personal Information
Nationality Egyptian
Resident Alexandria
Date of birth 01/12/1985
Passport No A01050533
Marital Status Married
Military service Completely Exempted
Car license valid
Qualification
B. S .c of Electrical Engineering, Communication & Electronics
Section.
University Alexandria University – Faculty of Engineering.
Graduation July 2008
General Grade Good
Graduation Project
"Project in Evolution of Mobile Communication Systems from 2G up to 4G"
Project Grade Excellent
Master Degree of Communication & Electronics.
University: Alexandria University – Faculty of Engineering.
Graduation: June 2014
General Grade: Excellent
Page 1 of 6

2. Master Title:
"Automated Measurements and maintenance in Petroleum Industry."
Professional Experience
Company Alexandria Petroleum Maintenance Company
( PETROMAINT )
Duration From April /2009 to January /2014.
Position Electrical and Instrumentation Projects Engineer.
E&I Department.
Company Abu Qir Petroleum Company (joint Venture between
EGPC and Edison Italy).
Duration From February /2014 till now.
Position Instrumentation & Control System Engineer.
Projects Division.
Job Responsibilities
• E & I team member for PETROMAINT responsible for performing the work
as a contractor within the contract scope of work (fabrication, laying
cables, instrument installation, testing, calibrating, pre-commissioning and
commissioning activities for the project and handing over to the client.).
• E & I team member for AQP projects (New projects, replacing &
upgrading) at onshore and offshore plants.
• Reviewing projects engineering documents and drawings based on
projects requirements & applicable codes and standard (Engineering
Phase).
• Responsible for coordination, supervision and inspection of electrical and
instrument installation, calibration, control cables terminations and testing.
Page 2 of 6

3. • Follow up & Inspect contractors activities as per contract scope of work
and construction professionalism.
• E & I team member for pre-commissioning, commissioning and start up of
AQP projects for instrument field and different control system of new
projects.
Projects Experience
1. Electrical Works for Installation of lighting and earthing networks:
• Projects with the same above scope: (Onshore)
 Construction of SIDPIC alternative pit.
 Electrical Works for AGIBA (Meliha Camp).
 Electrical Works for PETRODARA Service Camp.
2. E & I works for PETROSHAHD (Zahraa early Production area):
• Scope of work:
 Installation of lighting system of tanks.
 Installation of cathodic protection system for the tanks.
 Installation of instruments on tanks and production lines.
3. E & I works for PETROGAS new Spherical Tanks:
• Scope of work:
 Installation of lighting system of the site.
 Installation of earthing system for the site.
 Instruments installation and calibration on the spherical
tanks and production lines.
 Installation of fire alarm and fighting system for the site.
4. E & I works for DAPETCO (Dew point new site):
• Scope of work:
 Installation of lighting system of the site.
 Installation of earthing system for the site.
 Installation of fire and gas detection system for the site.
Page 3 of 6

4.  Installation of the MCC panels, low voltage cables, medium
voltage cables, and control cables.
 E & I Pre-commissioning activities.
5. E & I works for WASCO (New Compressor Area)
• Scope of work:
 Installation of two new compressors (VALERUS).
 Installation of lighting system of the site.
 Installation of earthing system for the site.
 Installation of fire and gas detection system for the site.
 E&I Pre-commissioning activities.
 Commissioning activities in the presence of the vendor.
6. Engineering, Procurement & Installation of Fire & Gas system
panels & detectors on PII, WAQ & NAQ-PI platforms: (Offshore)
• Scope of work:
 Revamping of the old F&G system and detectors by new ones.
 Install new F&G system (Yokogawa).
 Commissioning and startup of the new F&G system.
7. Replacing the old LPG system (conduit system) with a new system.
• Scope of work:
 Replace the old Conduit system ant Meadia Site with a new
cable tray system between the Junction boxes and the
instruments.
8. Replacement of NA-PI Platform WHCP: (Offshore)
• Scope of Work:
 Install a new WHCP at NA-PI platform (PROSERV).
 Make all the required tubing and connections required for
the new WHCP.
9. Installation of new Metering System at Meadia Site: (Onshore)
• Scope of work:
Page 4 of 6

5.  Installation of Metering system (instruments, UCP, cables,
etc,….)
 Pre-commissioning and Commissioning activities for the
Metering system with the Vendor (Metanoimpianti).
10. Engineering for the Tie-in of the two new skids (Flash Drum, and
Re-boiler) with the existing system.(Onshore)
• Scope of work:
 Review the Documents of Engineering of Tie-in with the
Engineering contractor (Worley Parson).
11. Replacement of PII Platform WHCP: (Offshore)
• Scope of work:
 Make Modification on WHCP (QUAM Panel) of NAQ-PI
Platform to be applicable for PII Platform.
 Installation and commissioning the WHCP at PII.
Abroad Visits & Courses during Job
• Electric Protection System: Discrimination, Protective relays calcification,
current and transformers, over current protection, differential protection, earth
fault and earth leakage protection.
• Automatic Control, PLC, SCADA: Course include Basics of Automatic
Control, The ladder diagram, the Programming logic control level 1
(introduction) and level 2 (Advanced), training on RSLogix, RSlink, RS
Emmiulator 500, RS view, performing some PLS programs, and troubleshooting
solution, Basics of SCADA system.
LANGUAGE
Arabic Mother Tongue
English Fluent speaking & writing
SKILLS
Page 5 of 6

6. • Having leadership qualities, excellent interpersonal and good
communication skills.
• Good planning and execution for projects activates.
• Troubleshooting studying and solving technical control problems.
• Review and study specifications, Instruments Data sheet& drawings.
• Familiarized with the codes and standards used in the oil & gas industry
such as API, ISA, NFPA and ETP ...etc.
• Good experience in selection and using of instrument cables, glands,
fittings, tubing and valves.
• Good experience in selection of explosion proof material reference to area
classification.
• Preparing and issuing procedure for different jobs and field works.
• Preparing and issuing Pre-Commissioning and Commissioning Certificates
as per UKCS-TI Standards and Forms.
• "Upgrading, minor and major surveys…”
Reference
• Eng. Ahmed Fouad
E&I General Manager for Petromaint.
E-mail: ahmed_10@hotmail.com
• Eng. Islam El-Refaei
Instrument Section Head at Abu Qir Petroleum Company.
E-mail: islam.refaay@abuqirpet.com
References and documents are available upon request.
"I hope that my qualifications could meet your criteria to be a member in your
esteemed organization"
Page 6 of 6

7. • Having leadership qualities, excellent interpersonal and good
communication skills.
• Good planning and execution for projects activates.
• Troubleshooting studying and solving technical control problems.
• Review and study specifications, Instruments Data sheet& drawings.
• Familiarized with the codes and standards used in the oil & gas industry
such as API, ISA, NFPA and ETP ...etc.
• Good experience in selection and using of instrument cables, glands,
fittings, tubing and valves.
• Good experience in selection of explosion proof material reference to area
classification.
• Preparing and issuing procedure for different jobs and field works.
• Preparing and issuing Pre-Commissioning and Commissioning Certificates
as per UKCS-TI Standards and Forms.
• "Upgrading, minor and major surveys…”
Reference
• Eng. Ahmed Fouad
E&I General Manager for Petromaint.
E-mail: ahmed_10@hotmail.com
• Eng. Islam El-Refaei
Instrument Section Head at Abu Qir Petroleum Company.
E-mail: islam.refaay@abuqirpet.com
References and documents are available upon request.
"I hope that my qualifications could meet your criteria to be a member in your
esteemed organization"
Page 6 of 6