COVER LETTER I am writing to outline my extensive experience and successful track record as an Electrical and Instrument Construction/Maintenance Supervisor. I believe I possess the skills, qualifications and vital experience necessary to make a very significant contribution to your operation. My extensive experience in chemical, petrochemical, thermal power plant, nuclear power plant, fertilizer plant and cement industries, and construction industry I have been involved with installation, maintenance, testing, troubleshooting, in E & I and repairing and maintenance of electronics system, worked on power electronics, worked on electrical control system, worked on frequency drive, soft starter,PLC,DCS,foundation field bus system, security system, structured cabling networking, surveillance system, fire and gas system, hazardous area instrumentation I am looking forward to have a great time with your company

1. IKRAM HUSSAIN E-Mail:ikraam.hussain999@gmail.co
MOB: 00966547214531 00966594797477
EDUCATION QUALIFICATION: : DAE ELECTRICAL AND INSTRUMENTATION
: BACHELOR OF SCIENCE (B.SC PHYSICS)
NATIONALITY : : PAKISTANI
IQAMA : : TRANSFERABLE (2330736105)
ELECTRICAL AND INSTRUMENT SUPERVISOR
OBJECTIVE Seeking forchallenging postwhereexcellent working condition conductiveto character
working thefavors of organization and hopeforgood character
SUMMARY : Over 15 years of experience in Instrumentation field, with various reputed
companies. Continuous and diversified works in the field of Instrumentation has lead to learn the
various skills that are needed . Able to understand various aspects of Instrumentation Job loop
drawings, data sheets, instrument specifications including interlock logics, PID controllers.
Diligently plans the activities to expedite the different requirements of the job in compliance to
the company Specifications & requirements. Punch List & Clearance of the same in liaison with
PMT Team & Construction Contractor for various modifications works
PARTICIPATED TRAINING Company in house training for covering instrumentation, closed awareness
and understanding of Saudi Aramco engineering standard SAES,SMSS,SATIPand understanding of
industry codes and practice of NES,NFPA,IEEE,ANSI
CALIBRATION,MAINTENANCE,INSTALLATION,TROUBLESHOOTING,
EXPERIENCE DETAIL
COMPANY: ARCHEN ENGINEERING CONSULTING (KSA)
PROJECT: INFRASTRUCTURE PROJECT
DATE : DEC 2012 TO SEP 2016
POSITION: ELECTRICAL &INSTRUMENT SUPERVISOR
RESPONSIBILITIES AND ACTIVITIES
 supervision of Cable trays over the supports and verify the alignment before clamping, anchor
bolts and nuts requirement as pre IFC Drawing and final installation of cable tray
 installation of DCS panel and mother board installation with digital input, digital output,
analog input, analog output cord installation ,Inspection of panel earthling
 UPS installation , loop checking from field to Marshaling cabinet inspection of cable laying ,
cable continuity on cable drum
 Worked on switch gear for the separation of grid supply and national supply that
interconnected With bus bar panel
 Inspection the installation of frequency drive, parameter checking and interlocking with fire
alarm honey well system

2.  Completed the precommissioning and commissioning procedure for the installation of flat
bus bar building standard and complete documentation according to project specification
 insulation resistance test of bus bar panel according to international standard
 Completed the documentation for the installation of solid state motorized electromechanical
breaker for the isolation of generator and national grid supply
 installation of DCS panel and mother board installation with digital input, digital output,
analog input, analog output cord installation ,Inspection of panel earthling
 Conduct activity and inspection in accordance to project Quality Assurance manual and
quality control inspection plan
 Prepare daily inspection document prior to project completion
 Take out the quantity of structured cabling networking system, fire alarm system, and cable
lengthen for used in project
 CCTV cameras and Fire alarm system, FM 200 control module, horn strobe, call point, cable
pulling from control room to JB,then JB to field instrument
 Inspection of main panel, sub panel, main breaker,ATS with termination of cable according to
RFI monitoring
 completed documents against construction complete jobs , meggaring continuity test, cable
insulation test
 UPS installation , loop checking from field to Marshaling cabinet inspection of cable laying ,
cable continuity on cable drum
 inspection of Transformer according to specification ,VoIP structure network, security
network system , through Fiber optic cables
 ,prepared the (NCR) NON conformance report Inspection of Grounding cable jointing,
bonding conductor ,installation of Earthling rod ,check the resistance of earthling rod with
stack rod and meggar ,
 Inspection of UTP patch panel fiber optic patch panel
 completed documents against construction complete jobs ,continuity test, cable insulation
test
 UPS installation , loop checking from field to Marshaling cabinet inspection of cable laying ,
cable continuity on cable drum according to project specification
 inspection of Transformer according to specification ,structured cabling networking system,
VoIP structure network, security network system , satellite network system ,CCTV cameras
through Fiber optic cables
CLIENT FARABI LAB (EXPANSION PROJECT)
DATE MAY 2012 TO OCT 2012
POSITION ELECTRICAL & INSTRUMENT SUPERVISOR
RESPONSIBILITIES & ACTIVITIES:
 loop checking of fire alarm making the plan of cable laying schedule inspection of
checking of motor control system in control building
 Review quality pack, loop folder and project drawing.

3.  Monitor completed document against construction completed jobs. Verify the
Location of Duct banks according to given IFC drawing
 Laying of conduits in U.G. Supervision of Conduit Size and Length of duct banks,
 loop checking from field instrument to marshaling cabinet and instrument
stanchions, Transmitter, Tubing from taping point to process instruments
including air supply leak testing according with standard and specification.
 Check and verified installation of field junction boxes, Analog & Digital cables
Thermocouple cable.
 Supervision of wire termination in field instrument, junction boxes and Marshaling
cabinet. Check and verified Remote instrument building grounding
 Attend quality and construction meeting in weekly basis to discuss quality related
issue
 As per international standard and specification instrument calibration, method of
statement as per approved project drawing, inspected ad witnesses instrument
cable duct bank, cable pulling from rib to JB and control room and RGS conduit
and stanches of instrument devices
 Check to verify exact termination point of each cable as per approved wiring
diagram core marker and tightens of cable
COMPANY: FLOWTRONICS PVT LTD
CLIENT: PAK ARAB OIL REFINARY (PAKISTAN)
DATE: JULY 2009 TO JAN 2012
POSITION: ELECTRICAL & INSTRUMENT SUPERVISOR
 Worked on different kind of flow instrumentation, magnetic flow
meter(yokogawa,rosemount) and worked on velocity flow meter,corilis flow
meter(Siemens, emerson,endress) thermal mass flow meter (emerson,siera,magnetrol)
and vortex flow meter (siemens, endress, rosemount,yokogawa)
 Worked on different kind of flow transmitter (yokogawa,emerson,honeywell,endress) and
also worked on foundation field system transmitter and different kind of rotary and vane
disk type flow meter
 Bench test and calibration of control valve of different type (fisher,honeywell) and
different type of I/P positioner(abb,fisher,sampson,magnetrol,spirax,siemens,valtek)
 Worked on radar level transmitter (rosemount,siemens,strans) ultrasonic
transmitter(flowcorp,emerson,flow line,rosemount,siemens)and ultrasonic sensor
 Worked on the troubleshooting of instrumentation and replacement of instrumentation
 Worked on impulse line Mani folding valve and replacement
 Worked on pressure transmitter and pressure sensor (rosemount,yokogawa,siemens)
pressure switches, I/p convertor and pressure calibrating dead weight tester, tale tester
 Worked on temperature instrumentation j type, temperature data logger,and calibration
of temperature instrumentation
 Termination of digital and analog cable in field and marshaling cabinet
 Responsible for the routine maintenance such as preventive ,corrective and break down
maintenance and prepare report on work to be done

4.  Remove defective instrument ,decontaminate, disassemble and replaced defective part
and installation
 Precommissioning and commissioning and functional test of process loop by interpretation
of loop drawing, hook up drawing and cause and effective diagram
 Check to verify exact termination point of each cable as per approved wiring diagram core
marker and tightens of cable
 Anything noted as per standard or specification then making surveillance or non-
conformance report
 Checking the daily progress report and forwarding it to management
 Review quality pack, loop folder and project drawing.
 Monitor completed document against construction completed jobs
 Review the instrument specification sheet (ISS) and wiring diagram of marshaling cabinet
and field instrument Review the piping and instrument diagram(P&ID) and instrument loop
diagram and location
 plan of instrument and instrument hook up drawing
 Inspection test plan of instrumentation material
 Coordination with area superintendent ensure that all installation is carried out as per
drawing and specification
 Safe the record of inspection checklist (ICT) Check instrument cable segregation for above
and underground installation
 Witnesses leak testing of airline, impulse instruments installation for process field
instrument.
COMPANY: ICI SODA ASH PVT LTD
CONTRACT BASIS DURATION: APRIL 2006 TO MAY 2009
COMPANY: BEST WAY CEMENT L
EMPLOYEE: JULY 2004 TO MAR 2006
POSITION: ELECTRICAL & INSTRUMENT SUPERVISOR
RESPONSIBILITIES AND ACTIVITIES:
 Supervision field construction project related to instrumentation ,installation,
calibration,modification, troubleshooting,
 Responsible for preparation of instrumentation, take off material and drawing needed for
the project
 Preparation of instrument work procedure and inspection test plan material receiving,
inspection, inspected material
 Weekly basis calibration report of co,co2,o2,nox sox, gas analyzer
 Prepare the monthly and weekly test report for modification work
 Responsible for checking field instrumentation,replacment,calibration related to profibus
 Responsible for checking the modification work that submitted from Dcs programmer
 Responsible for routine checking of ph analyzer for the requirment of production
department
 Resposible for checking progress report of department for rectification of fault during shift

5.  Supervision of all area instrumentation on weekly basis and ISO 9001 documentation,
Prepared the report for(IMR) instrument maintenance report inspection of all area
(TCR)transmitter calibration report sheet , prepared the report for(MOVR) motorized control
valve sheet ,Prepared the report for instrument cleaning report (ICR),
 supervision and check the parameter of Frequency drive(.5 ,1.5 ,3, 5 ,10,60kw) (ABB ,
SIEMENS, TELEMECHANIQUE) induction motor power and control circuit
 Thyristor control unit for (EP) ,weighing feeder of lime stone ,clay ,laterite , bauxite
,gypsum ,clinker And motor control unit control with profibus for DCS System, Supervision
of Conduit Size and Length of duct banks, U.G Conduits as per the give IFC drawing,
Supervision of Cable trays over the supports and verify the alignment, clamping, anchor
bolts and nuts requirement as pre IFC Drawing
 Magnetic flow trasmitter8742 (Rosemount), positive oval gear flow transmitter (omega),
flow transmitter PDS-III (SIEMENS), flow transmitter ST 3000 (SERIES 924) HONEYWELL) flow
 switches F61 series SPDT (Johnson & control) flow control Valve (china) digital display
 control valve (china) flow control valve electro pneumatic positioner 3582(FISHER) flow
 control valve 1200 hart positioner(VALTEK INT) DVC 6000 SERIES flow control valve(FISHER)
 Temperature data logger with pan drive(Germany) temp gauges and digital with switches
option(AMETEK) temperature transmitter STT850 ,STT170 (HONEYWELL )
 Smart absolute pressure transmitter ST700 (HONEYWELL) bottom stem mounted pressure
gauges ,diaphragm seal assembly gauges differential Pressure transmitter series 100
(Honeywell) remote seal diaphragm transmitter series100
(STD1200)(STR13D)[HONEYWELL) miniature explosion proof pressure switches Pressure
switches(china ,Germany) Ultrasonic level sensor Magnetic level gauge contact type
submersible level sensor, Magnetic level gauge (Magnetron) , level transmitter.
 PH analyzer202 (yokogawa) portable ph. meter (HANNA) PH analyzer (HONEY WELL), PH
transmitter (HONEY WELL).Vibration transmitter with controller vibration transmitter with
controller meter Displacement LVDT sensor(NATIONAL INT) , Displacement LVDT sensor
(CHINA) ,Capacitive type proximity sensor (OMRON ,OMEGA), Inductive type proximity
sensor(OMRON , OMEGA) Reed switches , limit switches (CHINA)
 Gas analyzer, CO, CO2, NO, for monitoring kiln, EP, COAL PLANT, (ABB, YOKOGAWA),
ELECTRICAL EXPERIENCE :
 Cooler fan induction motor control frequency drive with relay switching command
through DCS server ,All area Dust collecting motor power and control circuit from
electrostatic precipitator control card , clay hopper control motor with circuit with DCS
Control with frequency drive and instrumentation and Motorized operated valve power
and control circuit, coal firing fan induction motor with completely coal hopper purging
control system for pc and kiln ,Raw mill hydraulic system induction motor pump control
through frequency drive with profibus system for DScs server, inspection of parameter of
Kiln DC drive.
ELECTRONICS EXPERIENCE:

6.  welding plant current control cord, motor control profibus card,4-20 ma current control
cord ,diesel generator card ,vibration controller ,Temperature controller, pressure
controller, flow controller, level controller, magnetic flow meter power supply cord ,dust
controller (EP) cord, fire alarm cord, temperature recorder, lift operated control cord,
different types of ups, different types of weighing scale cord, plc. cpu module, high
temperature camera (kiln view) moving control cord, camera Dvr repairing,
C0MPANY: PAK AMERICAN FERTILIZER
CONTRACT: YEARLY OUTAGE ONLY
INCLUSIVE DATE DEC 2002 TO APRIL 2003
POSITION: INSTRUMENT TECHNICIAN
COMPANY: OLYMPIA CHEMICAL (PVT) LIMITED
EMPLOYEE: OCT 2003 TO MAY 2004
POSITION: INSTRUMENT &ELECTRONICS SUPERVISOR
RESPONCIBILITIES AND ACTIVITIES
 Commissioning ,installation ,of induction motor fan , induction motor pump , and making
the inputs and output ,analog output , analog input, power and control circuit
 Monitoring through DCS system, Commissioning , calibration of all area process control
instrumentation Worked as loop check coordinator on DCS ESD, SYSTEM , perform motor
 Pump and inputs (Local, remote, start, run, stop) Coordinate with DCS operator. K type
Thermocouple with indicator (uk) infrared temp sensor (OMEGA) ,temperature recorder,
Universal process controller 703750 (JUMO) ,PT 100 , PT 50 (china ,Germany Low pressure
and high pressure switch low vacuum pressure switch, Pressure transmitter (honey well )
 ultra-sonic level sensor (IR COMPANY) ,level sensor (china) level transmitter (ZHYQ) ,level
sensor (MOSH GROUP) ,level transmitter (HONEY WELL) ,level transmitter Gas analyzer O2,
CO2. (ABB) Inductive type proximity, Capacitive type proximity sensor (OMRON, OMEGA)
LVDT displacement sensor
AES LAL PIR THERMAL POWER STATION (yearly outage)
(SEP 1999 TO DEC 1999) (SEP 2002 TO NOV 2002)
INSTALLATION, MAINTENANCE, CALIBRATION
Worked on co , co2,nox sox , gas analyzer, maintenance of pump, calibration of analyzer,
maintenance of analyzer probe, and changing of o2 sensor, calibration of all pneumatic
temperature controller, maintenance of boiler camera , maintenance of mov control valve
WORKED ON CALIBRATION EQUIPMENT: Hart communicator (275,375,475),Low pressure hand
pump (Druck),Single Dc power supply(MCP),Hand held infrared temperature detector,
Temperature calibrators DBC (JUFFRA, DRUCK),Temperature, calibrator,(TRX),DC power
supply(MATRIX),SFC Communicator(HONEYWELL),DP calibrator (TRX), Dead weight tester
(Buden Berg), hand held dew point meter , Digital Pressure indicator (DP1706), Digital
pressure calibrator (DP601016 FLUKE) ,Pressure calibrator (FC31 FLUKE, DRUCK), Resistance
decade box , low pressure hand pump (FLUKE), temperature bath junior (TEMPCAL) , clamp
meter, Multimeter(FLUKE), Earth meggar ,fluke hart communicator, fluke multimeter,
FATHER NAME: HAJI QURBAN HUSSAIN RELIGION: ISLAM