For clamping, rotation and tilting of pipes with round pro- files in manual or automatic welding, mainly in the field of pipe construction (prefabrication and assembly on site) as well as in the manufacture of plant.
This document provides information on three hydraulic crimping tools:
1. The HT 131-C is a robust, self-contained crimping tool that accepts semicircular slotted dies. It features a double speed action and a rotatable head for operator comfort. Safety features include a bypass valve and pressure release system.
2. The RHM 132 is a hydraulic presshead compatible with the same connectors as the HT 131-C. It has improved mechanical features and is suitable for high volume bench crimping.
3. The RH 132 is also a hydraulic presshead that connects to an external hydraulic pump. It is suitable for crimping a range of low and high voltage lugs and
Cembre B135C Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135C Battery Crimpers - Crimping Applications
HV & LV cable lugs - 400sqmm
HV & LV cable splices - 240sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Cembre RHU520 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU520
H.V. Overhead Lines
Lugs & Splices up to 1200sqmm
Cembre adapter AU230-130C is available to enable the Cembre RHU230-630 crimp head to accept the semi-circular slotted dies common to most 130kN crimping tools
Piletec Brochure - Piling Hammer BrochureLewis Ryan
Piletec Brochure with our full range of EMV, FSV, Croppers, Culvert Puller, Vibration Monitors and Augers.
Specifications of all equipment on offer to hire today.
View the UK's largest fleet of piling attachments.
The document discusses different types of motors used in robotics including AC motors, DC motors, DC geared motors, stepper motors, and servo motors. It provides details on the functioning and applications of each motor type, with DC geared motors and servo motors being most commonly used in robotics due to their ability to provide considerable torque and change direction with the same power supply. Controller circuits like H-bridges are used to control the direction of DC motors.
1) The document describes a lineup of linear servo actuators sold by Electromate for small to large systems. It provides details on various actuator models ranging from compact shaft types to large types that can transfer loads of up to 120kg.
2) The actuators can be controlled using three types of controllers to support different control modes and up to six axes simultaneously. Accessories like motor cables, encoder cables and regenerative resistance units are also described.
3) Specification tables provide the technical details of each actuator model like stroke lengths, thrusts, speeds and payload capacities to help customers select the suitable model for their application.
2016 02 26 univer power clamps benefitsMitch Yencha
The document describes various components of an automotive clamping system:
1) A manual release button is used to unlock the clamp when it reaches its final closing position without an air supply for safety unlocking.
2) A key stone protects housings from heavy loads and absorbs energy from opening and closing movements.
3) An optical sensor has an all-metal body and M12 swivel connector to detect clamp and power pivot positions without needing adjustment for different opening angles.
This document provides installation instructions for an OH8000 overhead automotive lift with an 8,000 lb capacity. It includes specifications for the lift as well as requirements for the installation site and foundation. The instructions describe how to prepare the site, set up the lift columns, drill anchor holes, run cables and hoses, and complete the installation. Safety cautions are provided regarding lifting equipment, drilling into concrete, and ensuring the foundation and lift are properly secured before use.
This document provides information on three hydraulic crimping tools:
1. The HT 131-C is a robust, self-contained crimping tool that accepts semicircular slotted dies. It features a double speed action and a rotatable head for operator comfort. Safety features include a bypass valve and pressure release system.
2. The RHM 132 is a hydraulic presshead compatible with the same connectors as the HT 131-C. It has improved mechanical features and is suitable for high volume bench crimping.
3. The RH 132 is also a hydraulic presshead that connects to an external hydraulic pump. It is suitable for crimping a range of low and high voltage lugs and
Cembre B135C Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135C Battery Crimpers - Crimping Applications
HV & LV cable lugs - 400sqmm
HV & LV cable splices - 240sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Cembre RHU520 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU520
H.V. Overhead Lines
Lugs & Splices up to 1200sqmm
Cembre adapter AU230-130C is available to enable the Cembre RHU230-630 crimp head to accept the semi-circular slotted dies common to most 130kN crimping tools
Piletec Brochure - Piling Hammer BrochureLewis Ryan
Piletec Brochure with our full range of EMV, FSV, Croppers, Culvert Puller, Vibration Monitors and Augers.
Specifications of all equipment on offer to hire today.
View the UK's largest fleet of piling attachments.
The document discusses different types of motors used in robotics including AC motors, DC motors, DC geared motors, stepper motors, and servo motors. It provides details on the functioning and applications of each motor type, with DC geared motors and servo motors being most commonly used in robotics due to their ability to provide considerable torque and change direction with the same power supply. Controller circuits like H-bridges are used to control the direction of DC motors.
1) The document describes a lineup of linear servo actuators sold by Electromate for small to large systems. It provides details on various actuator models ranging from compact shaft types to large types that can transfer loads of up to 120kg.
2) The actuators can be controlled using three types of controllers to support different control modes and up to six axes simultaneously. Accessories like motor cables, encoder cables and regenerative resistance units are also described.
3) Specification tables provide the technical details of each actuator model like stroke lengths, thrusts, speeds and payload capacities to help customers select the suitable model for their application.
2016 02 26 univer power clamps benefitsMitch Yencha
The document describes various components of an automotive clamping system:
1) A manual release button is used to unlock the clamp when it reaches its final closing position without an air supply for safety unlocking.
2) A key stone protects housings from heavy loads and absorbs energy from opening and closing movements.
3) An optical sensor has an all-metal body and M12 swivel connector to detect clamp and power pivot positions without needing adjustment for different opening angles.
This document provides installation instructions for an OH8000 overhead automotive lift with an 8,000 lb capacity. It includes specifications for the lift as well as requirements for the installation site and foundation. The instructions describe how to prepare the site, set up the lift columns, drill anchor holes, run cables and hoses, and complete the installation. Safety cautions are provided regarding lifting equipment, drilling into concrete, and ensuring the foundation and lift are properly secured before use.
The document discusses AC servo motors. It covers the principle, characteristics, types, applications and sizing of AC servo motors. Some key points include:
- AC servo motors use permanent magnets and feedback from encoders to provide high torque and precision control.
- Characteristics like speed, torque, frame size, and encoder options can be selected for the application.
- Standard and special motors are used in applications like machine tools, semiconductor equipment, medical devices and more.
- Success stories demonstrate how AC servo motors replaced hydraulic systems and improved textile machines, simulators and other special purpose machines.
- Motor sizing software is available to help customers select the optimized motor for their application.
Ursviken large press brakes up to 10,000Tons and up to 18.4Mtrs. Ursviken specializes in turn key systems for pole bending, crane arms and telescoping crane arms.
Ursviken has been in business since 1885.
This document discusses DC servo motors. It defines a servo motor as a rotary actuator that allows for precise control of position, velocity, and acceleration using position feedback from an encoder to a controller. Servo motors are used in applications requiring precise motion control, such as robotics, CNC machinery, and automated manufacturing. The mechanism uses the difference between the commanded position and measured position to generate an error signal to rotate the motor in the direction needed to bring the output shaft to the appropriate position.
Cembre HT81-U
Cembre HT81-U Hydraulic Crimping Tools
Cembre HT81-U hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 240sqmm.
Cembre HT81-U crimping tool features a patented closure and release mechanism for the die locking pin - a wide range of electrical connectors can be crimped with a minimal number of die sets due to their unique, double groove styling.
Cembre HT81-U hydraulic crimping tool features a double speed crimping action : a fast advancing speed for rapid approach of the die sets to the electrical connector and a slower more powerful speed for crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT81-U crimp tool head can be fully rotated through 180 degrees.
Cembre HT81-U hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
Cembre HT51
Cembre HT51 Hydraulic Crimping Tools
Cembre HT51 hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 150sqmm. Cembre HT51 is ideal for working in confined switchgear and electrical equipment and features two stage crimping process.
Cembre HT51 hydraulic crimping tool features spring loaded handles allowing the die sets to be advanced with one hand - the other hand free to position the connector prior to crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT51 crimp tool head can be fully rotated through 180 degrees.
Cembre HT51 hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
An insulated version of the HT51 crimping tool is available for DNO's and utility contractors.
Cembre HT51 : Length 380mm, Width 130mm - 50kN Crimp Force.
This document provides information on ABB's BSM N-series AC servo motors, including:
- The BSM N-series provides low inertia and high torque for excellent dynamic performance and high machine throughput.
- Motors are available in sizes from 50mm to 100mm frame sizes with continuous torques ranging from 3.9 lb-in to 354 lb-in.
- Performance curves and specifications are provided for various motor models.
This document provides information on three hydraulic crimping tools:
1. The HT 131-C is a robust, self-contained crimping tool that features a double speed action and can fully rotate its head through 180 degrees. It has a crimping force of 130 kN.
2. The RHM 132 is a hydraulic presshead complete with a quick coupler that connects to a hydraulic pump. It is suitable for the same connectors as the HT 131-C and has improved mechanical features.
3. The RHM 133 is a hydraulic presshead designed for high volume bench crimping. It also connects to a hydraulic pump and has a crimping force of 130 kN.
There are three main types of stepper motors: permanent magnet, variable reluctance, and hybrid. Hybrid stepper motors are most commonly used in industry applications due to their high static and dynamic torque. Stepper motors can operate in full step, half step, or microstep modes which determine the motor resolution in steps per revolution. Higher resolution modes like half stepping increase the number of steps per revolution.
The document outlines the scope of work for supplying and installing a 400 ton/hr dolomite crushing and screening plant. The plant will have two stages of crushing (primary and secondary) and multiple screening units to produce 6 output products sizes. It will include a hopper, grizzly feeder, primary jaw crusher, secondary impactor, vibrating screens, belt conveyors, aggregate storage bins, electrical controls, and will be designed to process dolomite rock up to 1000mm and produce a final throughput of 400 ton/hr. The supplier must guarantee the specified productivity for 1 year and include operation/maintenance manuals and spare parts.
Servo Motors Adjust is a company that specializes in repairing servo motors and high-speed motors. They provide a 24-hour messenger service for quick repairs and can exchange motors to reduce downtime. Their highly trained technicians can repair motors from many major brands to save customers 50-85% compared to the cost of new motors. They also offer predictive testing, vibration analysis, and training to help customers maintain equipment efficiently.
ommon motion systems use three types of control methods. They are position control, velocity control and torque control.
The majority of Newport’s motion systems use position control. This type of control moves the load from one known fixed position to another known fixed position. Feedback, or closed-loop positioning, is important for precise positioning.
Velocity control moves the load continuously for a certain time interval or moves the load from one place to another at a prescribed velocity. Newport’s systems use both encoder and tachometer feedback to regulate velocity.
Torque control measures the current applied to a motor with a known torque coefficient in order to develop a known constant torque. Newport’s motion systems do not employ this method of control.
An Electrical braking for all three phase electric motors , removes unnecessary use of mechanical brake lining or mechanical brake units , works with the concept of DC injection braking , also a braking for better safety , application in circular saws , grinding machines, centrifuges, vibrator motors
Speed control of three phase induction motorSourabh sharma
In this presentation Methods of speed control of 3 phase induction motors are presented.
Speed of three phase induction motor can be controlled from
1) Stator Side or from 2) Rotor Side
Three phase induction_motor(eee499.blogspot.com)slmnsvn
This document summarizes a graduation project on speed control of a three-phase induction motor using a pulse width modulation inverter. It contains chapters on the induction motor, PWM inverter design, and a practical drive circuit. The circuit uses a HEF-4752V PWM generation chip to generate sinusoidal PWM signals to control the inverter switches and thereby regulate motor speed. Diagrams of the motor equivalent circuit and torque-speed characteristics are provided to explain how speed can be varied by changing supply frequency or voltage. The document contains detailed circuit descriptions and explanations of motor and inverter operation.
This document discusses factors to consider when selecting a servo motor and drive for an application. It outlines key sizing factors like inertia ratio, speed, maximum torque at speed, and RMS torque at speed. An inertia ratio between 2:1 and 5:1 is typical, with higher ratios requiring a motor with more inertia or changes to reduce load inertia. It also provides information on synchronous vs induction servo motors and their relative advantages. In general, a modest motor oversizing of up to 20% is acceptable.
1) The document describes several automation projects completed by MCM including assembly lines for ballast production, pipe bending, foam cutting, and exhaust pipe assembly with insulation.
2) Key features of the automation projects include use of pallets, pneumatic control systems, simultaneous operations at multiple stations, and modular designs allowing for increased productivity.
3) One project includes an 8-station transfer line that performs three successive operations to assemble insulated exhaust pipes at a rate of 6 pieces per minute. Another project utilizes a 10-station line to build core-coil subassemblies for ballasts.
Toyota 30 7 fbcu20 forklift service repair manualdueikdkmem
This document is the service manual for the Toyota electric forklift models 7FBCU15 to 55 series. It contains specifications, maintenance, repair, diagnostic and service procedures for the chassis, body, electrical controls, and material handling system. The manual should be used to provide quick and correct servicing of the corresponding forklift models. This manual deals with the models as of July 2001, and any changes after this will be communicated separately. The manual is organized by section with topics including general information, battery, multi-display functions, troubleshooting, motor, drive unit, and more.
This document provides specifications for various metalworking machines, including lathes, milling machines, drilling machines, bandsaws, and vertical bandsaws, made by Huvema. The lathes can handle various cutting diameters and speeds and include features like digital readouts and guards. The milling machines include models with vertical and horizontal spindles and can handle various workpiece sizes. The drilling machines have adjustable speeds and capacities ranging from 32 to 40mm. The bandsaws have cutting capacities for various materials and angles. The vertical bandsaws have tilting tables and integrated welding capabilities.
The document describes the SSQ MultiPro Roof Panel Machine from Drexel Metals LLC. It includes specifications for the machine such as its dimensions, weight, speed, and hydraulic drive system. It can form various metal materials into different panel profiles using interchangeable roller systems. Standard features include safety controls and quick-change components. Expandable options include overhead reels, decoilers, and run out tables.
Giuliano Truck Tire Changers, Catalogue 2023
One of the main goals for GIULIANO company is to reinforce and consolidate our market position about heavy duty and truck tire changers; which is a more and more developing and interesting market segment.
We’ve started a re-styling operation of our whole product line in this field, to enhance features and meet more demand on the market.
Visit Giuliano Automotive web site www.giuliano-automotive.com
Universal joints allow drive shafts in vehicles to transmit power between non-parallel rotating shafts, like between the transmission and wheels, to allow for suspension movement. They have been used since antiquity based on gimbal designs. Modern universal joints can be made of steel or plastic and are used in many applications where shafts intersect at an angle. They provide advantages like large angular displacement capability but have disadvantages like output speed and acceleration fluctuations depending on the operating angle.
The document discusses AC servo motors. It covers the principle, characteristics, types, applications and sizing of AC servo motors. Some key points include:
- AC servo motors use permanent magnets and feedback from encoders to provide high torque and precision control.
- Characteristics like speed, torque, frame size, and encoder options can be selected for the application.
- Standard and special motors are used in applications like machine tools, semiconductor equipment, medical devices and more.
- Success stories demonstrate how AC servo motors replaced hydraulic systems and improved textile machines, simulators and other special purpose machines.
- Motor sizing software is available to help customers select the optimized motor for their application.
Ursviken large press brakes up to 10,000Tons and up to 18.4Mtrs. Ursviken specializes in turn key systems for pole bending, crane arms and telescoping crane arms.
Ursviken has been in business since 1885.
This document discusses DC servo motors. It defines a servo motor as a rotary actuator that allows for precise control of position, velocity, and acceleration using position feedback from an encoder to a controller. Servo motors are used in applications requiring precise motion control, such as robotics, CNC machinery, and automated manufacturing. The mechanism uses the difference between the commanded position and measured position to generate an error signal to rotate the motor in the direction needed to bring the output shaft to the appropriate position.
Cembre HT81-U
Cembre HT81-U Hydraulic Crimping Tools
Cembre HT81-U hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 240sqmm.
Cembre HT81-U crimping tool features a patented closure and release mechanism for the die locking pin - a wide range of electrical connectors can be crimped with a minimal number of die sets due to their unique, double groove styling.
Cembre HT81-U hydraulic crimping tool features a double speed crimping action : a fast advancing speed for rapid approach of the die sets to the electrical connector and a slower more powerful speed for crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT81-U crimp tool head can be fully rotated through 180 degrees.
Cembre HT81-U hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
Cembre HT51
Cembre HT51 Hydraulic Crimping Tools
Cembre HT51 hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 150sqmm. Cembre HT51 is ideal for working in confined switchgear and electrical equipment and features two stage crimping process.
Cembre HT51 hydraulic crimping tool features spring loaded handles allowing the die sets to be advanced with one hand - the other hand free to position the connector prior to crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT51 crimp tool head can be fully rotated through 180 degrees.
Cembre HT51 hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
An insulated version of the HT51 crimping tool is available for DNO's and utility contractors.
Cembre HT51 : Length 380mm, Width 130mm - 50kN Crimp Force.
This document provides information on ABB's BSM N-series AC servo motors, including:
- The BSM N-series provides low inertia and high torque for excellent dynamic performance and high machine throughput.
- Motors are available in sizes from 50mm to 100mm frame sizes with continuous torques ranging from 3.9 lb-in to 354 lb-in.
- Performance curves and specifications are provided for various motor models.
This document provides information on three hydraulic crimping tools:
1. The HT 131-C is a robust, self-contained crimping tool that features a double speed action and can fully rotate its head through 180 degrees. It has a crimping force of 130 kN.
2. The RHM 132 is a hydraulic presshead complete with a quick coupler that connects to a hydraulic pump. It is suitable for the same connectors as the HT 131-C and has improved mechanical features.
3. The RHM 133 is a hydraulic presshead designed for high volume bench crimping. It also connects to a hydraulic pump and has a crimping force of 130 kN.
There are three main types of stepper motors: permanent magnet, variable reluctance, and hybrid. Hybrid stepper motors are most commonly used in industry applications due to their high static and dynamic torque. Stepper motors can operate in full step, half step, or microstep modes which determine the motor resolution in steps per revolution. Higher resolution modes like half stepping increase the number of steps per revolution.
The document outlines the scope of work for supplying and installing a 400 ton/hr dolomite crushing and screening plant. The plant will have two stages of crushing (primary and secondary) and multiple screening units to produce 6 output products sizes. It will include a hopper, grizzly feeder, primary jaw crusher, secondary impactor, vibrating screens, belt conveyors, aggregate storage bins, electrical controls, and will be designed to process dolomite rock up to 1000mm and produce a final throughput of 400 ton/hr. The supplier must guarantee the specified productivity for 1 year and include operation/maintenance manuals and spare parts.
Servo Motors Adjust is a company that specializes in repairing servo motors and high-speed motors. They provide a 24-hour messenger service for quick repairs and can exchange motors to reduce downtime. Their highly trained technicians can repair motors from many major brands to save customers 50-85% compared to the cost of new motors. They also offer predictive testing, vibration analysis, and training to help customers maintain equipment efficiently.
ommon motion systems use three types of control methods. They are position control, velocity control and torque control.
The majority of Newport’s motion systems use position control. This type of control moves the load from one known fixed position to another known fixed position. Feedback, or closed-loop positioning, is important for precise positioning.
Velocity control moves the load continuously for a certain time interval or moves the load from one place to another at a prescribed velocity. Newport’s systems use both encoder and tachometer feedback to regulate velocity.
Torque control measures the current applied to a motor with a known torque coefficient in order to develop a known constant torque. Newport’s motion systems do not employ this method of control.
An Electrical braking for all three phase electric motors , removes unnecessary use of mechanical brake lining or mechanical brake units , works with the concept of DC injection braking , also a braking for better safety , application in circular saws , grinding machines, centrifuges, vibrator motors
Speed control of three phase induction motorSourabh sharma
In this presentation Methods of speed control of 3 phase induction motors are presented.
Speed of three phase induction motor can be controlled from
1) Stator Side or from 2) Rotor Side
Three phase induction_motor(eee499.blogspot.com)slmnsvn
This document summarizes a graduation project on speed control of a three-phase induction motor using a pulse width modulation inverter. It contains chapters on the induction motor, PWM inverter design, and a practical drive circuit. The circuit uses a HEF-4752V PWM generation chip to generate sinusoidal PWM signals to control the inverter switches and thereby regulate motor speed. Diagrams of the motor equivalent circuit and torque-speed characteristics are provided to explain how speed can be varied by changing supply frequency or voltage. The document contains detailed circuit descriptions and explanations of motor and inverter operation.
This document discusses factors to consider when selecting a servo motor and drive for an application. It outlines key sizing factors like inertia ratio, speed, maximum torque at speed, and RMS torque at speed. An inertia ratio between 2:1 and 5:1 is typical, with higher ratios requiring a motor with more inertia or changes to reduce load inertia. It also provides information on synchronous vs induction servo motors and their relative advantages. In general, a modest motor oversizing of up to 20% is acceptable.
1) The document describes several automation projects completed by MCM including assembly lines for ballast production, pipe bending, foam cutting, and exhaust pipe assembly with insulation.
2) Key features of the automation projects include use of pallets, pneumatic control systems, simultaneous operations at multiple stations, and modular designs allowing for increased productivity.
3) One project includes an 8-station transfer line that performs three successive operations to assemble insulated exhaust pipes at a rate of 6 pieces per minute. Another project utilizes a 10-station line to build core-coil subassemblies for ballasts.
Toyota 30 7 fbcu20 forklift service repair manualdueikdkmem
This document is the service manual for the Toyota electric forklift models 7FBCU15 to 55 series. It contains specifications, maintenance, repair, diagnostic and service procedures for the chassis, body, electrical controls, and material handling system. The manual should be used to provide quick and correct servicing of the corresponding forklift models. This manual deals with the models as of July 2001, and any changes after this will be communicated separately. The manual is organized by section with topics including general information, battery, multi-display functions, troubleshooting, motor, drive unit, and more.
This document provides specifications for various metalworking machines, including lathes, milling machines, drilling machines, bandsaws, and vertical bandsaws, made by Huvema. The lathes can handle various cutting diameters and speeds and include features like digital readouts and guards. The milling machines include models with vertical and horizontal spindles and can handle various workpiece sizes. The drilling machines have adjustable speeds and capacities ranging from 32 to 40mm. The bandsaws have cutting capacities for various materials and angles. The vertical bandsaws have tilting tables and integrated welding capabilities.
The document describes the SSQ MultiPro Roof Panel Machine from Drexel Metals LLC. It includes specifications for the machine such as its dimensions, weight, speed, and hydraulic drive system. It can form various metal materials into different panel profiles using interchangeable roller systems. Standard features include safety controls and quick-change components. Expandable options include overhead reels, decoilers, and run out tables.
Giuliano Truck Tire Changers, Catalogue 2023
One of the main goals for GIULIANO company is to reinforce and consolidate our market position about heavy duty and truck tire changers; which is a more and more developing and interesting market segment.
We’ve started a re-styling operation of our whole product line in this field, to enhance features and meet more demand on the market.
Visit Giuliano Automotive web site www.giuliano-automotive.com
Universal joints allow drive shafts in vehicles to transmit power between non-parallel rotating shafts, like between the transmission and wheels, to allow for suspension movement. They have been used since antiquity based on gimbal designs. Modern universal joints can be made of steel or plastic and are used in many applications where shafts intersect at an angle. They provide advantages like large angular displacement capability but have disadvantages like output speed and acceleration fluctuations depending on the operating angle.
The document summarizes Power Jacks' new U-Series of subsea screw jacks and bevel gearboxes. The U-Series products are designed to operate efficiently underwater at depths up to 3,000m as standard. The line includes subsea screw jacks in various configurations (rotating, translating) and bevel gearboxes. Both product types are proven to perform in demanding subsea conditions for applications like positioning equipment and actuating connectors.
The Avtron Model HS45 is a heavy duty incremental encoder that can be used for both control and instrumentation applications. It has a two-phase output with complements and a marker pulse. Its electronics are fully potted to protect against liquids. An adaptive electronics feature and fault-check output allow it to self-monitor and provide early warning of potential issues. It is designed for rugged industrial environments but is not suitable for hazardous locations.
The Avtron Model HS45 encoder:
- Eliminates the need for shaft couplings by utilizing a high clamping-force collar to securely mount to machine shafts, even under vibration and shock.
- Uses magnetoresistive sensors, providing immunity to contaminants that can cause optical encoders to fail. All electronics are fully potted.
- Has a diagnostic package that monitors encoder health and provides advance warning of potential failures via a Fault-Check output and LED.
- Is available in hollow shaft models to fit shaft sizes from 5/8" to 1 1/8" and can encode speeds up to 5000 RPM in harsh industrial environments.
The SL 608 Outdoor High Lifter is a powerful lift suitable for both indoor and outdoor use, such as on construction sites. It has a lifting height of 3700 mm and can lift loads up to 608 kg. The lift has features like front-wheel drive, dual rear wheels, foam-filled tires, electronic brakes, and a 100 mm sideshift for precise placement. It can be easily transported in a van or on a trailer.
This document provides an overview and specifications for various types of conveyor systems manufactured by uni-xu®. It describes the Lineshaft Powered Roller Conveyor as the most versatile and economical conveyor available. The document includes an index listing 27 different conveyor components and accessories, with brief descriptions and specifications for each. It emphasizes the modularity, flexibility, and adaptability of the uni-xu® conveyor systems for material handling applications.
The document provides an overview of the uni-xu® range of conveyors manufactured by a British company since 1963. It describes the various types of conveyors available, including lineshaft powered roller conveyors, belt conveyors, pallet handling conveyors, and accessories like merges, bends, lifts and stops. The modular design allows for flexible, integrated conveying solutions and accumulation. The company is the UK's largest conveyor manufacturer with a large factory and production of over half a million rollers and 15km of conveyor annually.
The document discusses a gearless transmission system. It begins with an introduction describing the working principle of converting rotational motion using cylindrical bars bent to 90 degrees without using gears. It then provides a concept drawing of the machine. The working involves three bent links connected to an input shaft and housing, where rotation of the input shaft results in a processional motion being transmitted to the output shaft. The transmission includes applications such as driving tower clocks, gang drilling, and lubrication pumps. It compares the gearless drive to a geared drive, discussing advantages like interchangeability and transmitting motion at various angles. Finally, it covers selecting materials, with considerations like availability, properties, and designing the machine.
This document provides technical specifications for a crawler crane model XGC100A. It has the following key characteristics:
- A maximum lifting capacity of 100t/4m for the main boom and 8t/18m for the jib. The boom can extend from 13m to 61m and the jib can extend from 7m to 19m.
- An integrated control system and safety devices to ensure safe and reliable operation. Micro-control technology enables stable and precise movements.
- Modular design allows components like the jib, boom, and counterweights to be interchangeable between XGC cranes under 100 tons to reduce costs.
- Transportation requires only 3 vehicles due to an optimized design that
The document describes equipment and systems for well abandonment operations, including:
- A dual level work platform that houses integrated systems like 300 ton casing jacks, a PS120 power swivel, diamond wire saw, and dual equipment trolleys.
- Adapters that allow the work platform to mount directly to casing head housings or W-beams.
- Casing cutting systems like diamond wire saws and band saws that are positioned safely using trolleys.
- 300 and 500 ton casing jacks with removable bushings for pulling casing from wells.
رضا مصطفوی طباطبایی WELL SERVICE EQUIPMENT MECHANICAL TECHNICAL ENGINEERING 2015Reza Mostafavi Tabatabaei
The document describes equipment for well abandonment operations, including a dual level work platform system that can accommodate various service equipment like casing jacks, trolley systems, power swivels, saws, and tongs. It provides details on specific components of the system like the PS120 swivel, power tong adapter, saw adapter, casing jacks, and more. The purpose of the system is to provide an integrated solution for well abandonment tasks like removing grouted casing, cutting casing, and handling tubulars.
The document provides information on the 130 and 140 series positioning tables from Lintech, including:
- The 130 series offers precision performance for a wide range of motion control applications and includes options like various screw types, encoder mounts, and safety switches.
- Features of the 130 series include a low friction linear ball bearing system, precision machined aluminum construction, and a variety of screw and motor options.
- The document provides detailed specifications, dimensions, load capacities, and an ordering guide for selecting the proper 130 series table configuration.
This document provides an operations and maintenance manual for electric overhead cranes. It includes sections on system description, operating instructions, maintenance instructions, troubleshooting, and safety instructions. The system description section outlines the key components of electric overhead cranes, including brakes, limit switches, gearing systems, couplings, and control pendants. It also describes the typical motions and functions of overhead cranes. The document is intended to guide users on proper operation and maintenance of electric overhead cranes.
This document provides an operations and maintenance manual for electric overhead cranes. It includes sections on system description, operating instructions, maintenance instructions, troubleshooting, and safety instructions. The system description section outlines the key components of electric overhead cranes, including brakes, limit switches, gearing systems, couplings, and control pendants. It also describes the main motions of cranes and power feeding arrangements. The document is intended to instruct users on proper operation and maintenance of electric overhead cranes.
This document provides an operations and maintenance manual for electric overhead cranes. It includes sections on system description, operating instructions, maintenance instructions, troubleshooting, safety instructions, and periodic inspection charts. The document was created by Century Crane Engineers Pvt. Ltd. and provides information on crane components, types of cranes, system operation, power feeding arrangements, and descriptions of brakes and limit switches.
Cembre B135-UC
Battery Crimper Tools - Cembre B135-UC
Cembre B135UC Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Featuring a large 42mm jaw opening
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Will accept the accessories for performing "Deep Stepped Indent" system of crimping Aluminium cables
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135UC Battery Crimpers - Crimping Applications
HV & LV cable lugs and splices - 400sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Aluminium lugs & splices - 300sqmm
Cembre B135-UC Cordless Hydraulic Battery Crimping Tools
Cembre are world leaders in the manufacture of electrical crimping, compression connectors andassociated cable tooling for overhead and underground cable systems - this includes hydraulic, ratchet and battery operated cable crimping and cable cutting tools to suit low (LV) cables, high (HV) cables and overhead power lines. Overhead lines, power, control, instrumentation and telecomms cables can be cut or crimped with Cembre tools - this covers EPR, PILC, XLPE, PVC insulated cables with copper or aluminium conductors, lead sheath, steel wire armour ( SWA) or steel wire braid (GSWB).
This document provides information on 14.4 V cordless hydraulic crimping tools. It describes the features of models B135-C, B135L-C, and B135-UC including their dimensions, weight, battery type, crimping force, applications, and storage case information. It also lists included and optional accessories such as batteries, chargers, carrying cases, and power supplies. Key features highlighted are the tool's balanced and ergonomic design, double speed crimping action, rotating head, battery condition display, low vibration, and acceptance of common crimping dies.
HEATDEC-PRO - Contactless and automated measurement of body temperature to se...Gerald Obritzberger
- Particularly in access areas of factory premises, public spaces or care facilities such as retirement homes and homes for the elderly, a reliable statement about the body temperature of persons is relevant to safety. The measuring system evaluates the temperature distribution of a face and thus provides fast and reliable feedback. Depending on the result, additional measures can be switched via a relay. The system outputs the result via a display and acknowledges it – if desired – with a colour and sound signal. The application scenarios and the resulting measures are manifold. Therefore, among other things, the limit value and feedback text are freely configurable.
Intelligent measuring system equipped with thermal imaging camera for contactless and automated measurement of body temperature.
Թ The measuring system is preconfigured and ready for immediate use.
Թ No face recognition - protection of personal rights according to DSGVO
Թ Live thermal image with visual temperature output Թ The measuring result is acknowledged with a colour and sound signal (optional).
Թ Limit value and feedback text can be defined by the operator depending on the application.
Թ Ambient and daytime-dependent parameters can be configured.
Թ Each measurement situation is specified: typical scenarios are available as templates.
Թ Intelligent evaluation: The course of measurement is taken into account during evaluation
Թ Approximately 1,000 measurements per hour are possible.
Թ Stand-alone unit with GTE developed Camera and IPc implemented
Թ Touch screen
Export nations need to ensure that supply chains remain as intact as possible. This means that when and where credit insurers are withdrawing from covering international trade during this crisis, the government exceptionally steps in. Otherwise there is a risk a collapse of finely woven supply chains.”
The document summarizes a new wire feeding system called Rolliner 3G from Inmotion Technology Distribution LLC. It uses a series of connected roller pairs to guide welding wire through a conduit, reducing friction compared to conventional wire guide hoses. This allows longer wire runs between the wire source and welder. Rolliner 3G can transport various wire types up to 1.6mm in diameter at speeds up to 30m/min and has a low coefficient of friction of 0.08. It is maintenance-free and can be assembled without tools.
The automation of production processes using industrial robots has had a lasting impact on the manufacturing landscape in the past. For many manufacturing processes, the optimum degree of automation will continue to be a middle course between full automation and manual work in the future, which will focus on the aspect of occupational safety in this human-robot collaboration (HRC). The concept of separating protective fences requires more space and thus has a negative impact on the economic efficiency of this manufacturing option.
However, in human-robot collaboration (HRC) without separating protective devices, collisions between humans and robots cannot be ruled out. Thus, the HRC sector places special demands on collision prevention and detection. Torque monitoring and force limitation must achieve a level of protection similar to that provided by alternative protective fences.
The permissible limit values according to ISO/TS 15066 for force and pressure (or according to the specifications of the Robotic Industries Association of the American National Standards Institute RIA TR R15.806-2018) ensure the safe operation of HRC workstations and must be observed.
The force-pressure measuring system CoboSafe is an easy-to-use instrument for verifying compliance with required limit values by combined force-pressure measurements and their evaluation.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
2. 1. APPLICATIONS
For clamping, rotation and tilting of pipes with round profiles in manual or
automatic welding, mainly in the field of pipe construction (prefabrication and
assembly on site) as well as in the manufacture of plant.
Apart from being extremely economical (single handed operation, no
interruptions due to repeated turning of the pipe to be welded), this machine
also offers improvements in quality – there are no interruptions in the joint
and a continually precise horizontal position of the pipe is maintained.
3. 2. DESCRIPTION
The electric control as well as the tilting drive are located in the frame. Tilting is
carried out manually (U 150 and U 500) or motorized (U 1000, optional U 500) the
tilting angle is approx. 135°. The tilting section consists of drive and roller box,
holding column, clamping arm and pressure roller.
This machine is also available as a non tilting version (designation: U 150H, U
500H, U 1000H). In general, drives and electric controls of the U-series are
protected in the frame or in a control panel.
4. 3. ELECTRIC CONTROL
Rotary speed and direction are set at the front of the machine which is switched
on and off by a remote foot switch.
Further options of electric control:
a) Separate foot operated control unit (see illustration U 500, photo on this
page). Switching on and off and changing the direction of rotation takes place by
a foot switch, the rotary speed is adjusted by a foot control roller.
b) Switching on and off as well as changing the direction of rotation is carried out
from the welder’s helmet or shield. The rotary speed is set at the machine.
c) Turning direction and turning speed are set on a remote hand pendant.
5. TECHNICAL DATA U 150
Rotary speed: infinitely variable 0 – 50 inch/min.
Pipe range with clamped pipe: 1 – 8 inch incl. component flange.
Pipe range with unclamped pipe: 1 – approx. 12 inch (after take out the
holding column).
Max. tilting moment in relation to axis of tilt: 1300 inch*lbs.
Max. load (horizontal): 660 lbs on each rotator and roller support frame.
Max. load (vertical): 330 lbs. Torque at drive roller: 430 inch*lbs.
Power requirement: approx. 500 VA, 230 V, 1ph. (other voltage possible).
6. The U…H models have no tilting mechanism, but apart
from that they correspond exactly to the U models
7. TECHNICAL DATA U 500
Rotary speed: infinitely 0 – 50 inch/min.
Pipe range with clamped pipe: 1 – 16 inch incl. component flange.
Pipe range with unclamped pipe: 1 – 39 inch (after take out the holding
column.)
Max. tilting moment in relation to axis of tilt: 6500 inch*lbs.
Max. load (horizontal): 2200 lbs on each rotator and roller support frame.
Max. load (vertical): 1100 lbs. Torque at drive roller: 1750 inch*lbs.
Power requirement: 750 VA, 230 V, 1ph. (other voltage possible).
8. The U…H models have no tilting mechanism, but apart
from that they correspond exactly to the U models
9. TECHNICAL DATA U 1000
Rotary speed: infinetily variable 0 – 50 inch/min.
Pipe range with clamped pipe: 1 – 31 inch incl. component
flange.
Pipe range with unclamped pipe: 1 – 79 inch (after take
out the holding column.)
Max. tilting moment in relation to tilting axis 30 000
inch*lbs.
Max. load (horizontal pipe): 4 410 lbs.
Max. load (vertical pipe): 2 200 lbs. Torque at drive
rollers: 8 650 inch*lbs.
Power requirement. 2500 VA, 400 V, 3 ph. (other voltage
possible).
10. The U…H models have no tilting mechanism, but apart
from that they correspond exactly to the U models
11. These machines have essential advantages over traditional devices:
They can be used for pipes with elbows, tee pieces or other offset loads.
A wide range of pipes can be clamped. The infinitely variable rotary speed is
not affected by the size of a pipe because the workpiece is driven at its
external diameter in contrary to a standard positioner.
Quick precise centering and clamping without chuck, clamping shoe, etc.
Flexible pipe handling – pipe can be clamped at its centre of gravity. Tilting
moments and supports are irrelevant in most cases.
It is possible to center two pipes with the same outside diameter.
Various combinations are possible – e.g. clamping and driving of a main
spindle.