This document provides information on three hydraulic crimping tools: 1. The HT 131-C is a robust, self-contained crimping tool that accepts semicircular slotted dies. It features a double speed action and a rotatable head for operator comfort. Safety features include a bypass valve and pressure release system. 2. The RHM 132 is a hydraulic presshead compatible with the same connectors as the HT 131-C. It has improved mechanical features and is suitable for high volume bench crimping. 3. The RH 132 is also a hydraulic presshead that connects to an external hydraulic pump. It is suitable for crimping a range of low and high voltage lugs and

1. HT 131-C
HYDRAULIC CRIMPING TOOL
general features
Dimensions
mm
Crimping
force
kN
length
width
130
473
144
Weight kg
5,5
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
RHC 131
“C” sleeve
connectors
H.V. lugs
and splices
400
240
185
400
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P3*
This new
model, self
contained, robust and sturdy,
will accept all semicircular slotted dies, common to most 130 kN tools.
The tool features a double speed
action: a fast advancing speed for
rapid approach of the dies to the connector and a slower more powerful
speed for crimping.
For ease of operation and comfort of
the operator the tool head can be fully
rotated through 180 degrees.
Insulated
terminals
620x380xh135
2,5
D
—
STORAGE
*Suitable for storage of the tool and 14 sets of dies
The built-in safety valve will by-pass the
oil supply when the maximum pressure
is reached, and the pressure release
system can easily be operated at any
stage of compression.
HYDRAULIC PRESSHEADS
general features
Dimensions
mm
Crimping
force
kN
Max operating
pressure
bar
length
width
130
700
232
124
Weight kg
3,8
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Hydraulic
presshead complete with quick
automatic coupler for
connection to a hydraulic
pump with a working pressure
of 700 bar max, (see page
138-140) This new design with
improved mechanical features,
RHM 132
Insulated
terminals
“C” sleeve
connectors
H.V. lugs
and splices
400
240
185
400
STORAGE
Type
Weight
kg
Supplied
with the tool
Available
upon request
VAL P8*
is suitable for installing the same
range of connectors as HT 131-C.
Dimensions mm
445x290xh115
1,2
—
D
*Suitable for storage of the head and 14 sets of dies
general features
Dimensions
mm
Crimping
force
kN
Max operating
pressure
bar
length
width
130
700
216
80
Particularly suitable for high
volume bench crimping.
Weight kg
3,1
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
102
Insulated terminals
H.V. lugs
400
Hydraulic presshead complete with
quick automatic coupler for
connection to a hydraulic pump
with a working pressure of 700 bar
max, (see page 138-140).
L.V. lugs
240
400
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P8*
445x290xh115
1,2
—
D
*Suitable for storage of the head and 14 sets of dies
These tools are supplied without dies. For die selection, please refer to chart on pages 144 to 150