Cembre HT51 Cembre HT51 Hydraulic Crimping Tools Cembre HT51 hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 150sqmm. Cembre HT51 is ideal for working in confined switchgear and electrical equipment and features two stage crimping process. Cembre HT51 hydraulic crimping tool features spring loaded handles allowing the die sets to be advanced with one hand - the other hand free to position the connector prior to crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT51 crimp tool head can be fully rotated through 180 degrees. Cembre HT51 hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached. An insulated version of the HT51 crimping tool is available for DNO's and utility contractors. Cembre HT51 : Length 380mm, Width 130mm - 50kN Crimp Force.

1. HYDRAULIC CRIMPING TOOL
general features
Dimensions
mm
Crimping
force
kN
length
width
50
380
130
HT 51
Weight
kg
2,7
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Insulated
terminals
End
sleeves
240
70
“C” sleeve
Connectors
50
New design two
speed hydraulic tool,
lightweight and compact, this tool is ideal
for working in confined
spaces. Having the benefit of spring loaded handles,
the dies can be advanced
using only one hand; therefore
leaving the other hand free to
position the connector.
For ease of operation and comfort
of the operator, the tool head can be
fully rotated through 180 degrees.
The built-in safety valve will by-pass the
oil supply when the maximum pressure
is reached, and a pressure release
system can easily be operated at any
stage of the compression.
70
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
445x290xh95
1,2
D
—
* Suitable for storage of the tool and 20 sets of dies.
HT 51-KV version also
available for Power
Supply Companies
HYDRAULIC PRESSHEAD
general features
Dimensions
mm
Crimping
force
kN
Max operating
pressure
bar
length
width
50
700
196
75
RH 50
Weight
kg
1,6
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Insulated
terminals
End
sleeves
240
70
“C” sleeve
Connectors
50
Hydraulic
presshead
complete with quick
automatic coupler for
connection to a hydraulic
pump with a working pressure
of 700 bar max, (see page 138140) RH 50 is suitable for installing the same range of connectors
as HT 51.
70
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
Canvas bag 007
445x290xh95
350x105
1,2
0,13
D
—
—
D
* Suitable for storage of the tool and 20 sets of dies.
HYDRAULIC PRESSHEAD
general features
Dimensions
mm
Crimping
force
kN
Max operating
pressure
bar
length
width
50
700
210
70
RHM 50
Weight
kg
1,6
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Insulated
terminals
End
sleeves
240
70
50
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
Canvas bag 007
445x290xh95
350x105
1,2
0,13
D
—
—
D
Particularly suitable
for high volume
bench crimping.
* Suitable for storage of the tool and 20 sets of dies.
These tools are supplied without dies. For die selection, please refer to chart on pages 144 to 150
Hydraulic presshead complete
with quick automatic
coupler for connection to
hydraulic pump with working pressure of 700 bar max,
(see page 138-140).
RHM50 is suitable for installing the
same range of connectors as RH50.
99