Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm)
•
0 likes•843 views
This document provides information on three hydraulic crimping tools: 1. The HT 131-C is a robust, self-contained crimping tool that features a double speed action and can fully rotate its head through 180 degrees. It has a crimping force of 130 kN. 2. The RHM 132 is a hydraulic presshead complete with a quick coupler that connects to a hydraulic pump. It is suitable for the same connectors as the HT 131-C and has improved mechanical features. 3. The RHM 133 is a hydraulic presshead designed for high volume bench crimping. It also connects to a hydraulic pump and has a crimping force of 130 kN.
Report
Share
Report
Share
Download to read offline
Recommended
Cembre RHU520 - Hydraulic Crimp Head For LV HV Cables
Cembre RHU520 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU520
H.V. Overhead Lines
Lugs & Splices up to 1200sqmm
Cembre adapter AU230-130C is available to enable the Cembre RHU230-630 crimp head to accept the semi-circular slotted dies common to most 130kN crimping tools
Cembre HT81-U Hydraulic Crimping Tool
Cembre HT81-U
Cembre HT81-U Hydraulic Crimping Tools
Cembre HT81-U hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 240sqmm.
Cembre HT81-U crimping tool features a patented closure and release mechanism for the die locking pin - a wide range of electrical connectors can be crimped with a minimal number of die sets due to their unique, double groove styling.
Cembre HT81-U hydraulic crimping tool features a double speed crimping action : a fast advancing speed for rapid approach of the die sets to the electrical connector and a slower more powerful speed for crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT81-U crimp tool head can be fully rotated through 180 degrees.
Cembre HT81-U hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
Cembre HT51 Hydraulic Crimping Tool
Cembre HT51
Cembre HT51 Hydraulic Crimping Tools
Cembre HT51 hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 150sqmm. Cembre HT51 is ideal for working in confined switchgear and electrical equipment and features two stage crimping process.
Cembre HT51 hydraulic crimping tool features spring loaded handles allowing the die sets to be advanced with one hand - the other hand free to position the connector prior to crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT51 crimp tool head can be fully rotated through 180 degrees.
Cembre HT51 hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
An insulated version of the HT51 crimping tool is available for DNO's and utility contractors.
Cembre HT51 : Length 380mm, Width 130mm - 50kN Crimp Force.
Cembre HT131-C Hydraulic Crimping Tool
This document provides information on three hydraulic crimping tools:
1. The HT 131-C is a robust, self-contained crimping tool that accepts semicircular slotted dies. It features a double speed action and a rotatable head for operator comfort. Safety features include a bypass valve and pressure release system.
2. The RHM 132 is a hydraulic presshead compatible with the same connectors as the HT 131-C. It has improved mechanical features and is suitable for high volume bench crimping.
3. The RH 132 is also a hydraulic presshead that connects to an external hydraulic pump. It is suitable for crimping a range of low and high voltage lugs and
Industrial training ppt bhel bhopal
This industrial training report summarizes the process for manufacturing generating transformers at BHEL Bhopal. It discusses the key steps which include design and drawing, core building by stacking laminated silicon steel sheets, winding manufacturing using horizontal and vertical winding machines, coil assembling, power assembly by mounting the core and coils, case fitting to connect accessories like bushings and radiators, vapor phase drying to remove moisture, testing including routine and type tests, and final dispatch after successful testing. The report provides details on the types of materials, winding configurations, and tests used at each stage of manufacturing large power transformers.
Cembre ltd general catalogue (18 v097e) 140
Cembre ltd general catalogue (18 v097e) 140Azzan Al Badi Trading Sohar.. : +968 96516494 , +968 26845825 , azzanalbadi@gmail.com
Hydraulic Crimping Tool. Model: HT 120. Crimping Force: 120 KN. Dimensions: 488mm Length x 138mm Width. Brand: CEMBRE ....AZZAN AL BADI TRADING & CONT. EST.
ELECTRICAL & INDUSTRIAL MATERIALS
P.O Box 217, P.C 311, Sohar, Sultanate of Oman...AZZAN AL BADI TRADING & CONT. EST.
ELECTRICAL & INDUSTRIAL MATERIALS
P.O Box 217, P.C 311, Sohar, Sultanate of Oman.. azzanalbadi@gmail.comDM-ARM Machine
The document describes the SSQ MultiPro Roof Panel Machine from Drexel Metals LLC. It includes specifications for the machine such as its dimensions, weight, speed, and hydraulic drive system. It can form various metal materials into different panel profiles using interchangeable roller systems. Standard features include safety controls and quick-change components. Expandable options include overhead reels, decoilers, and run out tables.
Robust Shredders Catalog English
At Robust, we produce and sell shredders of wood, wood
waste and scrap, pallets, plastics and similar materials under
the registered trade mark ROBUST. The shredders uses
hardened cutting knives on a rotor to tear and crush the
material pushed towards the rotor by the hydraulic pressure
unit. Granulation of the output material depends on the size
of openings in the sieve installed behind the rotor.
Recommended
Cembre RHU520 - Hydraulic Crimp Head For LV HV Cables
Cembre RHU520 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU520
H.V. Overhead Lines
Lugs & Splices up to 1200sqmm
Cembre adapter AU230-130C is available to enable the Cembre RHU230-630 crimp head to accept the semi-circular slotted dies common to most 130kN crimping tools
Cembre HT81-U Hydraulic Crimping Tool
Cembre HT81-U
Cembre HT81-U Hydraulic Crimping Tools
Cembre HT81-U hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 240sqmm.
Cembre HT81-U crimping tool features a patented closure and release mechanism for the die locking pin - a wide range of electrical connectors can be crimped with a minimal number of die sets due to their unique, double groove styling.
Cembre HT81-U hydraulic crimping tool features a double speed crimping action : a fast advancing speed for rapid approach of the die sets to the electrical connector and a slower more powerful speed for crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT81-U crimp tool head can be fully rotated through 180 degrees.
Cembre HT81-U hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
Cembre HT51 Hydraulic Crimping Tool
Cembre HT51
Cembre HT51 Hydraulic Crimping Tools
Cembre HT51 hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 150sqmm. Cembre HT51 is ideal for working in confined switchgear and electrical equipment and features two stage crimping process.
Cembre HT51 hydraulic crimping tool features spring loaded handles allowing the die sets to be advanced with one hand - the other hand free to position the connector prior to crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT51 crimp tool head can be fully rotated through 180 degrees.
Cembre HT51 hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached.
An insulated version of the HT51 crimping tool is available for DNO's and utility contractors.
Cembre HT51 : Length 380mm, Width 130mm - 50kN Crimp Force.
Cembre HT131-C Hydraulic Crimping Tool
This document provides information on three hydraulic crimping tools:
1. The HT 131-C is a robust, self-contained crimping tool that accepts semicircular slotted dies. It features a double speed action and a rotatable head for operator comfort. Safety features include a bypass valve and pressure release system.
2. The RHM 132 is a hydraulic presshead compatible with the same connectors as the HT 131-C. It has improved mechanical features and is suitable for high volume bench crimping.
3. The RH 132 is also a hydraulic presshead that connects to an external hydraulic pump. It is suitable for crimping a range of low and high voltage lugs and
Industrial training ppt bhel bhopal
This industrial training report summarizes the process for manufacturing generating transformers at BHEL Bhopal. It discusses the key steps which include design and drawing, core building by stacking laminated silicon steel sheets, winding manufacturing using horizontal and vertical winding machines, coil assembling, power assembly by mounting the core and coils, case fitting to connect accessories like bushings and radiators, vapor phase drying to remove moisture, testing including routine and type tests, and final dispatch after successful testing. The report provides details on the types of materials, winding configurations, and tests used at each stage of manufacturing large power transformers.
Cembre ltd general catalogue (18 v097e) 140
Cembre ltd general catalogue (18 v097e) 140Azzan Al Badi Trading Sohar.. : +968 96516494 , +968 26845825 , azzanalbadi@gmail.com
Hydraulic Crimping Tool. Model: HT 120. Crimping Force: 120 KN. Dimensions: 488mm Length x 138mm Width. Brand: CEMBRE ....AZZAN AL BADI TRADING & CONT. EST.
ELECTRICAL & INDUSTRIAL MATERIALS
P.O Box 217, P.C 311, Sohar, Sultanate of Oman...AZZAN AL BADI TRADING & CONT. EST.
ELECTRICAL & INDUSTRIAL MATERIALS
P.O Box 217, P.C 311, Sohar, Sultanate of Oman.. azzanalbadi@gmail.comDM-ARM Machine
The document describes the SSQ MultiPro Roof Panel Machine from Drexel Metals LLC. It includes specifications for the machine such as its dimensions, weight, speed, and hydraulic drive system. It can form various metal materials into different panel profiles using interchangeable roller systems. Standard features include safety controls and quick-change components. Expandable options include overhead reels, decoilers, and run out tables.
Robust Shredders Catalog English
At Robust, we produce and sell shredders of wood, wood
waste and scrap, pallets, plastics and similar materials under
the registered trade mark ROBUST. The shredders uses
hardened cutting knives on a rotor to tear and crush the
material pushed towards the rotor by the hydraulic pressure
unit. Granulation of the output material depends on the size
of openings in the sieve installed behind the rotor.
Subsea Intervention System (SIS) - Worldwide Oilfield Machine
WOM’s Subsea Intervention System (SIS) makes full use of Magnum gate valve technology, incorporating Hydraulic Fail-Close Gate Valves and Subsea Magnum Gate Valve in both the Emergency Disconnect Package and the Lower Rise Package.
hydraulic-tunnel-thruster-brochure
Thrustmaster is a leading manufacturer of marine thrusters in the US, producing thrusters in a variety of configurations including tunnel thrusters. Thrustmaster hydraulic tunnel thrusters consist of a fixed pitch propeller coupled to a podded hydraulic motor, providing infinite speed control. They are simple, efficient, reliable propulsion units that are well-suited for maneuvering vessels in challenging marine conditions.
Stahl SH Wire Rope Hoist br_sz_sh_en_150325_web
The document describes the SH wire rope hoist. It has 5 frame sizes and 26 load capacity variants. It can be used stationary or with trolleys/crabs. It has compact dimensions and is largely maintenance-free with long service life. Standard features include two hoisting speeds, smooth operation, and high-quality safety components. An explosion-protected version is also available. The modular design allows for customization with individual solutions. Various options can further improve safety, costs, and convenience.
Wärtsilä New Generation Rectractable Thrusters
Wärtsilä new retractable thrusters offer a high level of power level which is particularly important for the harbour manoeuvring and docking of large ships, and for dynamic positioning of offshore vessels working in heavy sea conditions.
Rotating right resp presentation web-show
The document introduces a new artificial lift technology called the reciprocating electric submersible pump (RESP) system. The RESP uses a linear electric motor to drive a downhole reciprocating pump, eliminating the need for surface beam pumping units. It has advantages over beam pumps like a lower profile, no leaks or wear, improved efficiencies, and ability to handle deviated and gassy wells. The RESP provides environmental benefits as its manufacture and operation use less steel and emissions compared to beam pumps.
Transmitting power over distance and time
Mechanical Power Transmission
Electrical power transmission has replaced mechanical power transmission everywhere except very shortest distances. What is worth remembering, however, is that from the 16th century through the industrial revolution to the end of the 19th century mechanical power transmission was the norm – even for long distances.
Edm rod feeder track truck eng-ver 3
The document describes the EDM Diamond Pipe Automated Rod Feeder System, which consists of a rod feeder and jackup platform. The rod feeder handles common diamond drill pipes in 6m and 9m lengths, and can spin haul plugs to 400Nm. It reduces manual handling by 90% and works on mast angles from 45-90 degrees. The jackup platform has a 15T load capacity and independent hydraulic jacks, and can be loaded onto a truck. The system eliminates rod handling injuries and increases drilling efficiency and safety.
indesign-PDPS-compressed
The document describes Thrustmaster's Portable Dynamic Positioning System (PDPS), which allows vessels to be quickly converted to dynamically positioned vessels without extensive modifications. The PDPS consists of modular deck-mounted azimuthing thrusters, hydraulic power units, and a DP control van. It offers flexibility in sizing and can be installed dockside to upgrade vessels for offshore operations in deeper waters. The modular design allows configurations from 225kW to 2250kW with options for different DP class levels and controls.
Quick Die Change and Die Clamping Products
This document discusses hydraulic clamping systems and components for positioning clamps in machine slots, including:
- ROLLBLOC hollow piston clamps and sliding clamps that can be used in a wide range of applications.
- Hydraulic distributor plates that are used to set up associated park stations (die change) and can be equipped with a non-return valve.
- ROLLBLOC clamping bar and wedge clamps that offer additional rationalization potential when using die subplates as the clamping system can be fully automated.
Coiled tubing technology
A 1995-1998 project evaluated using coiled tubing for artificial lift applications. Shell successfully used coiled tubing to deploy an electric submersible pump offshore for the first time. Other applications of coiled tubing for artificial lift that were studied included gas lift, jet pumps, and deploying coiled tubing for well unloading and recompletions. Coiled tubing provided benefits over conventional artificial lift methods like reducing installation time and costs.
AW3000
ACCIONA Windpower has seen explosive growth of orders for its AW3000 platform. This success is due to a track record of reliability and product innovation coming from one of the most experienced wind energy companies in the world. The latest evolution is the AW132/3000 for low-wind sites, which delivers the lowest cost of energy in this segment. Partner with ACCIONA Windpower to make your projects rise above the competition.
integrated-hydraulic-outboard-propulsion-brochure-EMAIL
Thrustmaster manufactures hydraulic outboard propulsion units for use in brown water applications. Their units include integrated and modular deck-mounted models with 360-degree steering, hydraulic tilt, and optional depth adjustment. Common applications include barges, ferries, dredges, and vessels used for maintenance, construction, and cleanup. The units are self-contained and can be quickly installed to provide maneuverability without requiring modifications to the vessel.
Cembre B135-C Battery Powered Crimping Tools
Cembre B135C Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135C Battery Crimpers - Crimping Applications
HV & LV cable lugs - 400sqmm
HV & LV cable splices - 240sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Kistler U500 pipe welding
For clamping, rotation and tilting of pipes with round pro- files in manual or automatic welding, mainly in the field of pipe construction (prefabrication and assembly on site) as well as in the manufacture of plant.
Weg Soft Starters
Soft-starters control the voltage applied to a motor to provide smooth starting and stopping. WEG soft-starters are suitable for applications that require soft starts like fans, conveyor belts, pumps, mixers, mills and centrifuges. There are advantages to using soft-starters including eliminating mechanical shocks, reducing stresses on couplings, minimizing water hammer, limiting current peaks and voltage drops, optimizing electrical components, and protecting and extending the life of electric motors. WEG offers several models of soft-starters for applications from light to very heavy loads up to 1400 kW.
Continuous miners
The document discusses continuous miners used in underground mining. It describes the JOY continuous miner product line which includes three machine classes for different mining heights: 14CM, 12CM, and 12HM series. Key components of the continuous miners are described, including the cutter, gathering head, conveyor, traction, dust collector, hydraulics, and electrical systems. Specifications for the Joy 12CM15 continuous miner used in two mining projects are also provided.
Feeder breakerppt
The document describes the design and components of a belt feeder breaker machine. The belt feeder breaker receives material and reduces its size before conveying it to another location. It has a drag conveyor, pick breaker, hydraulic crawler drives, electric and hydraulic systems, and programmable sensor controller. The pick breaker uses rotating picks to break material, and the document provides technical specifications for the machine used in Jhanjra. Maintenance procedures are also described for components like the head shaft assembly and breaker shaft assembly.
Lineshaft catalog
This document provides information on lineshaft driven live roller conveyors. It describes the general operating principle where a drive shaft spans the length of the conveyor and transmits power to rollers. It then provides specifications for 1 3/8 inch diameter lineshaft conveyors, including dimensions, materials, speeds, load capacities and options. It also describes lineshaft driven curve and spur conveyors for turns and merges, listing available angles and dimensions.
Slab Turn Over Device
Engineering-Design-Manufacturing-Assembly of all kind of equipments and services from a single spare parts to complete LF or complete meltshop. Ladles, ladle cars, gas purging stations, emergency lance stirrers, wire feeders, material handling systems, Slab Turnover Device, etc. Training and advisory services. Complete turnkey projects for Mini Steel Plant and rolling mills.
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) Manual
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) Manual
3M Heat Shrink Cable End Caps
3M heat shrink end caps provide a reliable and easy method of sealing cables for both indoor and outdoor applications whilst offering excellent electrical and mechanical protection.The standard 3M heatshrink cable end cap is supplied without the printed lightning strike - printed heat shrink cable caps available upon request. 3M heat shrink cable end caps are ideally suited for cap-ending of cables on cable drums and for direct burial.
Rotronic HygroGen2 - Data Sheet
This document summarizes the features and capabilities of the HygroGen2, a portable humidity and temperature calibrator. Key features include the ability to generate stable humidity and temperature conditions for calibrating up to 6 probes simultaneously, integrated software for automated calibration and data collection, and an optional AutoCal feature for automated multi-point calibration of probes. The HygroGen2 provides precise control of humidity from 5-95% RH and temperature from 0-60°C.
More Related Content
What's hot
Subsea Intervention System (SIS) - Worldwide Oilfield Machine
WOM’s Subsea Intervention System (SIS) makes full use of Magnum gate valve technology, incorporating Hydraulic Fail-Close Gate Valves and Subsea Magnum Gate Valve in both the Emergency Disconnect Package and the Lower Rise Package.
hydraulic-tunnel-thruster-brochure
Thrustmaster is a leading manufacturer of marine thrusters in the US, producing thrusters in a variety of configurations including tunnel thrusters. Thrustmaster hydraulic tunnel thrusters consist of a fixed pitch propeller coupled to a podded hydraulic motor, providing infinite speed control. They are simple, efficient, reliable propulsion units that are well-suited for maneuvering vessels in challenging marine conditions.
Stahl SH Wire Rope Hoist br_sz_sh_en_150325_web
The document describes the SH wire rope hoist. It has 5 frame sizes and 26 load capacity variants. It can be used stationary or with trolleys/crabs. It has compact dimensions and is largely maintenance-free with long service life. Standard features include two hoisting speeds, smooth operation, and high-quality safety components. An explosion-protected version is also available. The modular design allows for customization with individual solutions. Various options can further improve safety, costs, and convenience.
Wärtsilä New Generation Rectractable Thrusters
Wärtsilä new retractable thrusters offer a high level of power level which is particularly important for the harbour manoeuvring and docking of large ships, and for dynamic positioning of offshore vessels working in heavy sea conditions.
Rotating right resp presentation web-show
The document introduces a new artificial lift technology called the reciprocating electric submersible pump (RESP) system. The RESP uses a linear electric motor to drive a downhole reciprocating pump, eliminating the need for surface beam pumping units. It has advantages over beam pumps like a lower profile, no leaks or wear, improved efficiencies, and ability to handle deviated and gassy wells. The RESP provides environmental benefits as its manufacture and operation use less steel and emissions compared to beam pumps.
Transmitting power over distance and time
Mechanical Power Transmission
Electrical power transmission has replaced mechanical power transmission everywhere except very shortest distances. What is worth remembering, however, is that from the 16th century through the industrial revolution to the end of the 19th century mechanical power transmission was the norm – even for long distances.
Edm rod feeder track truck eng-ver 3
The document describes the EDM Diamond Pipe Automated Rod Feeder System, which consists of a rod feeder and jackup platform. The rod feeder handles common diamond drill pipes in 6m and 9m lengths, and can spin haul plugs to 400Nm. It reduces manual handling by 90% and works on mast angles from 45-90 degrees. The jackup platform has a 15T load capacity and independent hydraulic jacks, and can be loaded onto a truck. The system eliminates rod handling injuries and increases drilling efficiency and safety.
indesign-PDPS-compressed
The document describes Thrustmaster's Portable Dynamic Positioning System (PDPS), which allows vessels to be quickly converted to dynamically positioned vessels without extensive modifications. The PDPS consists of modular deck-mounted azimuthing thrusters, hydraulic power units, and a DP control van. It offers flexibility in sizing and can be installed dockside to upgrade vessels for offshore operations in deeper waters. The modular design allows configurations from 225kW to 2250kW with options for different DP class levels and controls.
Quick Die Change and Die Clamping Products
This document discusses hydraulic clamping systems and components for positioning clamps in machine slots, including:
- ROLLBLOC hollow piston clamps and sliding clamps that can be used in a wide range of applications.
- Hydraulic distributor plates that are used to set up associated park stations (die change) and can be equipped with a non-return valve.
- ROLLBLOC clamping bar and wedge clamps that offer additional rationalization potential when using die subplates as the clamping system can be fully automated.
Coiled tubing technology
A 1995-1998 project evaluated using coiled tubing for artificial lift applications. Shell successfully used coiled tubing to deploy an electric submersible pump offshore for the first time. Other applications of coiled tubing for artificial lift that were studied included gas lift, jet pumps, and deploying coiled tubing for well unloading and recompletions. Coiled tubing provided benefits over conventional artificial lift methods like reducing installation time and costs.
AW3000
ACCIONA Windpower has seen explosive growth of orders for its AW3000 platform. This success is due to a track record of reliability and product innovation coming from one of the most experienced wind energy companies in the world. The latest evolution is the AW132/3000 for low-wind sites, which delivers the lowest cost of energy in this segment. Partner with ACCIONA Windpower to make your projects rise above the competition.
integrated-hydraulic-outboard-propulsion-brochure-EMAIL
Thrustmaster manufactures hydraulic outboard propulsion units for use in brown water applications. Their units include integrated and modular deck-mounted models with 360-degree steering, hydraulic tilt, and optional depth adjustment. Common applications include barges, ferries, dredges, and vessels used for maintenance, construction, and cleanup. The units are self-contained and can be quickly installed to provide maneuverability without requiring modifications to the vessel.
Cembre B135-C Battery Powered Crimping Tools
Cembre B135C Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135C Battery Crimpers - Crimping Applications
HV & LV cable lugs - 400sqmm
HV & LV cable splices - 240sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Kistler U500 pipe welding
For clamping, rotation and tilting of pipes with round pro- files in manual or automatic welding, mainly in the field of pipe construction (prefabrication and assembly on site) as well as in the manufacture of plant.
Weg Soft Starters
Soft-starters control the voltage applied to a motor to provide smooth starting and stopping. WEG soft-starters are suitable for applications that require soft starts like fans, conveyor belts, pumps, mixers, mills and centrifuges. There are advantages to using soft-starters including eliminating mechanical shocks, reducing stresses on couplings, minimizing water hammer, limiting current peaks and voltage drops, optimizing electrical components, and protecting and extending the life of electric motors. WEG offers several models of soft-starters for applications from light to very heavy loads up to 1400 kW.
Continuous miners
The document discusses continuous miners used in underground mining. It describes the JOY continuous miner product line which includes three machine classes for different mining heights: 14CM, 12CM, and 12HM series. Key components of the continuous miners are described, including the cutter, gathering head, conveyor, traction, dust collector, hydraulics, and electrical systems. Specifications for the Joy 12CM15 continuous miner used in two mining projects are also provided.
Feeder breakerppt
The document describes the design and components of a belt feeder breaker machine. The belt feeder breaker receives material and reduces its size before conveying it to another location. It has a drag conveyor, pick breaker, hydraulic crawler drives, electric and hydraulic systems, and programmable sensor controller. The pick breaker uses rotating picks to break material, and the document provides technical specifications for the machine used in Jhanjra. Maintenance procedures are also described for components like the head shaft assembly and breaker shaft assembly.
Lineshaft catalog
This document provides information on lineshaft driven live roller conveyors. It describes the general operating principle where a drive shaft spans the length of the conveyor and transmits power to rollers. It then provides specifications for 1 3/8 inch diameter lineshaft conveyors, including dimensions, materials, speeds, load capacities and options. It also describes lineshaft driven curve and spur conveyors for turns and merges, listing available angles and dimensions.
Slab Turn Over Device
Engineering-Design-Manufacturing-Assembly of all kind of equipments and services from a single spare parts to complete LF or complete meltshop. Ladles, ladle cars, gas purging stations, emergency lance stirrers, wire feeders, material handling systems, Slab Turnover Device, etc. Training and advisory services. Complete turnkey projects for Mini Steel Plant and rolling mills.
What's hot (19)
Subsea Intervention System (SIS) - Worldwide Oilfield Machine
Subsea Intervention System (SIS) - Worldwide Oilfield Machine
integrated-hydraulic-outboard-propulsion-brochure-EMAIL
integrated-hydraulic-outboard-propulsion-brochure-EMAIL
Viewers also liked
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) Manual
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) Manual
3M Heat Shrink Cable End Caps
3M heat shrink end caps provide a reliable and easy method of sealing cables for both indoor and outdoor applications whilst offering excellent electrical and mechanical protection.The standard 3M heatshrink cable end cap is supplied without the printed lightning strike - printed heat shrink cable caps available upon request. 3M heat shrink cable end caps are ideally suited for cap-ending of cables on cable drums and for direct burial.
Rotronic HygroGen2 - Data Sheet
This document summarizes the features and capabilities of the HygroGen2, a portable humidity and temperature calibrator. Key features include the ability to generate stable humidity and temperature conditions for calibrating up to 6 probes simultaneously, integrated software for automated calibration and data collection, and an optional AutoCal feature for automated multi-point calibration of probes. The HygroGen2 provides precise control of humidity from 5-95% RH and temperature from 0-60°C.
Crowcon F-Gas Detector - Fixed Point Gas Detectors
The Crowcon F-Gas detector is an infrared fixed-point gas detector that provides reliable detection of refrigerant gases and sulfur hexafluoride. It utilizes a high-quality infrared sensor calibrated to detect common F-Gases and operates with low maintenance costs. The detector helps users comply with European regulations by providing early warnings of gas leaks to reduce expensive replacement costs and environmental impacts.
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
The Raychem LFRJ is a new flame retardant inline joint system for safety class cables up to 1 kV that combines the high performance flame retardant components of Raychem heat shrink technology. It meets the same characteristics and requirements as safety class cables, is universally applicable for power and control cables, and meets cable flexibility requirements after installation without any fragile components or hazardous materials, making installation easy and fast.
Baur - Cable Fault Locators & Location Specialists (LV MV HV Cables)
The document discusses cable fault location methods from BAUR. It provides an overview of BAUR's products for cable fault location including portable devices, modules, systems, and cable test vans. The document also covers cable fault types, location process steps, and recommended solutions tailored for different cable voltages.
Viewers also liked (6)
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) Manual
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) Manual
Crowcon F-Gas Detector - Fixed Point Gas Detectors
Crowcon F-Gas Detector - Fixed Point Gas Detectors
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
Baur - Cable Fault Locators & Location Specialists (LV MV HV Cables)
Baur - Cable Fault Locators & Location Specialists (LV MV HV Cables)
Similar to Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm)
Cembre RHU81 Hydraulic Crimp Head
The HT 81-U hydraulic crimping tool and RHU 81 hydraulic presshead are lightweight tools for crimping connectors up to 240 mm2. The HT 81-U features a patented die locking pin and can crimp a wide range of connectors with interchangeable dies. The RHU 81 connects to a hydraulic pump and is suitable for crimping in confined spaces. Both tools come with storage cases and feature double speed crimping action for rapid crimping of connectors.
Cembre RH50 Hydraulic Crimp Head
RH50
Cembre Hydraulic Crimp Head (240sqmm) - RH50 Presshead
Cembre hydraulic crimp head RH50 complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar max.
Cembre crimp head RH50 is ideal for high volume and bench crimping due to ligheweight (1.6kg) and compression speed.
Cembre RH50 Crimping Presshead - Length 196mm, Width 75mm, 50kN Crimp Force.
Cembre RH50 Presshead - Crimping Head Capability :
LV Lugs & Splices up to 240sqmm
Insulated Terminals up to 70sqmm
End Sleeves up to 50sqmm
C Sleeves, C Tap Connectors up to 70sqmm
Cembre B135-UC Battery Powered Crimping Tools
Cembre B135-UC
Battery Crimper Tools - Cembre B135-UC
Cembre B135UC Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Featuring a large 42mm jaw opening
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Will accept the accessories for performing "Deep Stepped Indent" system of crimping Aluminium cables
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135UC Battery Crimpers - Crimping Applications
HV & LV cable lugs and splices - 400sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Aluminium lugs & splices - 300sqmm
Cembre B135-UC Cordless Hydraulic Battery Crimping Tools
Cembre are world leaders in the manufacture of electrical crimping, compression connectors andassociated cable tooling for overhead and underground cable systems - this includes hydraulic, ratchet and battery operated cable crimping and cable cutting tools to suit low (LV) cables, high (HV) cables and overhead power lines. Overhead lines, power, control, instrumentation and telecomms cables can be cut or crimped with Cembre tools - this covers EPR, PILC, XLPE, PVC insulated cables with copper or aluminium conductors, lead sheath, steel wire armour ( SWA) or steel wire braid (GSWB).
Cembre B135LN-C Battery Powered Crimping Tools
This document provides information on 14.4 V cordless hydraulic crimping tools. It describes the features of models B135-C, B135L-C, and B135-UC including their dimensions, weight, battery type, crimping force, applications, and storage case information. It also lists included and optional accessories such as batteries, chargers, carrying cases, and power supplies. Key features highlighted are the tool's balanced and ergonomic design, double speed crimping action, rotating head, battery condition display, low vibration, and acceptance of common crimping dies.
Cembre Insulated Cable Cutters & Cutting Tools (85mm diameter) - CP 1086-W-10...
Cembre Insulated Cable Cutters & Cutting Tools (85mm diameter) - CP 1086-W-10...Thorne & Derrick International
This document provides specifications for three hydraulic units that can be used for crimping or cutting electrical connectors and cables.
The units are created by combining a double stage hydraulic foot pump with different heads. One unit has a crimping force of 230kN and is suitable for connectors up to 630mm2. A second unit has a crimping force of 130kN and is suitable for connectors up to 400mm2. The third unit can cut cables up to 95mm in diameter.
Each unit includes a storage case for accessories and additional information is provided on optional accessories for the cutting units.Cembre RHU520 Hydraulic Crimp Head - Presshead
This document provides specifications for various hydraulic press heads and their accessories for crimping electrical connectors. It lists the storage dimensions and weights for the press heads, as well as their maximum crimping force, operating pressure, and dimensions. Accessories including dies are available for cutting and crimping different types and sizes of conductors, lugs, and splices for low voltage, high voltage, overhead power lines, and cable connectors up to 1200 mm2. The press heads can be used with hydraulic pumps providing a maximum pressure of 700 bar.
Cembre ECW-H3D Hydraulic Crimp Head
This document provides specifications for various hydraulic press heads and their accessories for crimping electrical connectors. It includes details on storage dimensions and weights for the press heads, their maximum crimping force and operating pressure, as well as the main applications and crimping capacity for different conductor and connector types for each head and die set. Adaptor options are also listed that allow the heads to use dies compatible with 130kN tools.
Cembre RHU230-630 Hydraulic Crimp Head - Pressheads
This document provides specifications for various hydraulic press heads and their accessories for crimping electrical connectors. It includes details on storage dimensions and weights for the press heads, their maximum crimping force and operating pressure, compatible die sizes and applications. Press heads can crimp connections up to 630 or 1200 square mm and are compatible with dies for tasks like cutting conductors or compressing connectors for low voltage, high voltage, overhead power lines and more. Optional adapters allow heads to use dies standardized to most 130 kN tools.
Cembre RHU231 Hydraulic Crimp Head - Pressheads
Cembre RHU231 Hydraulic Crimp Head
Cembre RHU231 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU231
Copper Lugs & Splices up to 630sqmm
Aluminium Lugs & Splices up to 500sqmm
Enerpac shs-series-sync hoist-load-positioning-hydraulic-hoist
The document describes an SHS-Series SyncHoist system for precise horizontal and vertical load positioning using a single crane. The system uses hydraulically operated cylinders attached to the load's lifting points to maneuver it with high accuracy. It can reduce risks, improve safety and work efficiency compared to conventional load positioning methods. The system offers manual or automatic PLC-controlled operation and is suitable for applications like wind turbine assembly and machinery maintenance.
A vtron hs45
The Avtron Model HS45 is a heavy duty incremental encoder that can be used for both control and instrumentation applications. It has a two-phase output with complements and a marker pulse. Its electronics are fully potted to protect against liquids. An adaptive electronics feature and fault-check output allow it to self-monitor and provide early warning of potential issues. It is designed for rugged industrial environments but is not suitable for hazardous locations.
A vtron hs45
The Avtron Model HS45 encoder:
- Eliminates the need for shaft couplings by utilizing a high clamping-force collar to securely mount to machine shafts, even under vibration and shock.
- Uses magnetoresistive sensors, providing immunity to contaminants that can cause optical encoders to fail. All electronics are fully potted.
- Has a diagnostic package that monitors encoder health and provides advance warning of potential failures via a Fault-Check output and LED.
- Is available in hollow shaft models to fit shaft sizes from 5/8" to 1 1/8" and can encode speeds up to 5000 RPM in harsh industrial environments.
F1014R 30L-50L jacketed systems
This document provides information about jacketed reactors and motor options from Ace Glass. It describes their universal stand design that allows vessels from 10L to 50L and different motor mounting configurations. It lists the components included with 30L and 50L base systems. Finally, it discusses additional motor options like air motors, hazardous duty motors, and brushless motors of various speeds and torques that can be used with their reactor systems.
ROEHM POWER CHUCKS I CYLINDERS I STEADY RESTS
POWER CHUCKS WITH THROUGH-HOLE
RÖHM power chucks with through-hole are successfully used both in bar and pipe machining, as well as in the machining of flange-type workpieces. The proven wedge system allows maximum clamping forces with maximum clamping precision at the same time. The rigidity of the power chucks which contributes to this is achieved with a sturdy chuck construction.
Advantages
-Large through-hole optimal for bar machining
-Proven power chucks with long service life
-Wedge hook system for high load capacity and clamping precision
POWER CHUCKS WITHOUT THROUGH-HOLE
The RÖHM power chucks without through-hole have already been used for decades and have proven themselves many times over in various clamping tasks. Thanks to the wedge hook system as well as the rigid chuck construction, the power chucks achieve a high load capacity and clamping precision along with a long service life.
Advantages
-Proven power chucks with long service life
-Wedge hook system for high load capacity and clamping precision
-Simple setup as basis for a wide range of applications
POWER CHUCKS WITH QUICK-ACTING JAW CHANGE
Fast jaw change, high clamping precision and high clamping force characterize the power chucks DURO-NCSE and DURO-NC. Thanks to the quick-acting jaw change system, the jaws can be flexibly offset, turned or changed. The clamping precision of the chuck is always retained.
Advantages
-Flexible use thanks to quick-acting jaw change reducing set-up times
-Secure jaw lock via the safety key
-Large through-hole optimal for bar machining
http://eshop.roehm.biz/roehm_de_de/online-shop/kraftspannfutter-zylinder-lunetten.html
ACTv Tools
This document appears to be a catalog for American Completion Tools products. It includes contact information for ACT locations around the world and lists various well completion equipment available from ACT, such as frac pumps, cementing units, plugs, valves, packers, and other downhole tools. Product specifications and descriptions are provided.
ACT Tools
This document appears to be a product catalog for American Completion Tools, listing various well completion equipment and tools including: frac equipment, cementing equipment, packers, bridge plugs, valves, manifolds, and other downhole tools. It provides information on sizes, pressure ratings, models, and applications for the different tools. Contact information is also provided for American Completion Tools locations around the world.
ROEHM AUTOMATION TECHNOLOGY
2-JAW PARALLEL GRIPPER
Equipped with two parallel gripper fingers, RÖHM grippers are optimally suited for universal gripping of round and angular workpieces. Especially on robots or portals, the 2-jaw parallel grippers will convince you with their compact design, low own weight and high gripping force.
Advantages
- High gripping force with low own weight and compact design
- Maximum flexibility thanks to versatile connection and fastening options
- Long service life and high reliability thanks to specially ground base jaws in proven T-slot guide
3-JAW CENTRIC GRIPPER
Equipped with three centrically arranged gripper fingers, RÖHM RZP grippers are optimally suited for universal and self-centering gripping of round workpieces. Especially on robots or portals, the 3-jaw centric grippers will convince you with their compact design, low dead weight and high gripping force.
Advantages
-High gripping force with low dead weight and compact design
-Maximum flexibility thanks to versatile connection and fastening options
-Long service life and high reliability thanks to specially ground base jaws in proven
T-slot guide
2-JAW LONG STROKE GRIPPER
The 2-jaw long stroke gripper allows for large jaw strokes, thanks to its design, and is therefore optimally suited for handling large parts and a high part diversity. Due to the sealed guide, it is often used in rough environments. The centric clamping is realized via the synchronization of the two toothed racks with a gear wheel.
Advantages
-High gripping force with simultaneously high jaw stroke by means of double-acting pressure pistons
-High torque support for using long gripper fingers by means of robust flat guide
-Sealed for rough ambient conditions with quad-ring seal and highly precise intermediate jaws
http://eshop.roehm.biz/roehm_de_de/online-shop/automatisierungstechnik.html
Centrifugal_Pump_Split_Case.pdf
- Ruhrpumpen is an innovative pump technology company that offers a wide range of quality centrifugal pumps, including their line of horizontal split case pumps.
- Their HS/ZW horizontal split case pumps are single- or multi-stage, double suction pumps with double volutes and an axially-split case.
- Ruhrpumpen ensures their pumps meet the latest technical requirements and are suitable for applications in industries like oil/gas, petrochemical, power generation, mining, and water treatment.
HKS Offshore / Armature / Valves / Flaps Catalogue
We put you in the best position
We have developed the rotary actuators presented here, which have proven their worth through many years of use, especially for fittings, butterfly valves and ball valves.
The highest safety and quality demands as well as longevity and precision are typical features of HKS rotary actuators. Our strengths also include ATEX, DIN standards or special customised solutions.
Product catalogue e 2015 pdf cpl a
This document is a product catalog from MATO GmbH & Co. KG describing their line of lubrication equipment. It includes grease guns, pumps, hoses, and accessories for handling lubricants like grease and oil. The company ensures lubricants perform optimally through equipment that delivers them cleanly, safely, and in the required volumes. MATO products are manufactured to high quality standards in a fully automated facility.
Similar to Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm) (20)
Cembre Insulated Cable Cutters & Cutting Tools (85mm diameter) - CP 1086-W-10...
Cembre Insulated Cable Cutters & Cutting Tools (85mm diameter) - CP 1086-W-10...
Cembre RHU230-630 Hydraulic Crimp Head - Pressheads
Cembre RHU230-630 Hydraulic Crimp Head - Pressheads
Enerpac shs-series-sync hoist-load-positioning-hydraulic-hoist
Enerpac shs-series-sync hoist-load-positioning-hydraulic-hoist
HKS Offshore / Armature / Valves / Flaps Catalogue
HKS Offshore / Armature / Valves / Flaps Catalogue
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Recently uploaded (20)
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Cembre HT131-C Hydraulic Crimping Tool (up to 400sqmm)
- 1. HT 131-C HYDRAULIC CRIMPING TOOL general features Dimensions mm Crimping force kN length width 130 473 144 Weight kg 5,5 M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2 L.V. lugs and splices RHC 131 “C” sleeve connectors H.V. lugs and splices 400 240 185 400 Type Dimensions mm Weight kg Supplied with the tool Available upon request VAL P3* This new model, self contained, robust and sturdy, will accept all semicircular slotted dies, common to most 130 kN tools. The tool features a double speed action: a fast advancing speed for rapid approach of the dies to the connector and a slower more powerful speed for crimping. For ease of operation and comfort of the operator the tool head can be fully rotated through 180 degrees. Insulated terminals 620x380xh135 2,5 D — STORAGE *Suitable for storage of the tool and 14 sets of dies The built-in safety valve will by-pass the oil supply when the maximum pressure is reached, and the pressure release system can easily be operated at any stage of compression. HYDRAULIC PRESSHEADS general features Dimensions mm Crimping force kN Max operating pressure bar length width 130 700 232 124 Weight kg 3,8 M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2 L.V. lugs and splices Hydraulic presshead complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 138-140) This new design with improved mechanical features, RHM 132 Insulated terminals “C” sleeve connectors H.V. lugs and splices 400 240 185 400 STORAGE Type Weight kg Supplied with the tool Available upon request VAL P8* is suitable for installing the same range of connectors as HT 131-C. Dimensions mm 445x290xh115 1,2 — D *Suitable for storage of the head and 14 sets of dies general features Dimensions mm Crimping force kN Max operating pressure bar length width 130 700 216 80 Particularly suitable for high volume bench crimping. Weight kg 3,1 M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2 102 Insulated terminals H.V. lugs 400 Hydraulic presshead complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 138-140). L.V. lugs 240 400 STORAGE Type Dimensions mm Weight kg Supplied with the tool Available upon request VAL P8* 445x290xh115 1,2 — D *Suitable for storage of the head and 14 sets of dies These tools are supplied without dies. For die selection, please refer to chart on pages 144 to 150