Giuliano Truck Tire Changers, Catalogue 2023
One of the main goals for GIULIANO company is to reinforce and consolidate our market position about heavy duty and truck tire changers; which is a more and more developing and interesting market segment.
We’ve started a re-styling operation of our whole product line in this field, to enhance features and meet more demand on the market.
Visit Giuliano Automotive web site www.giuliano-automotive.com
This document provides specifications for the Yale MP20XD electric pedestrian double stacker, including its dimensions, performance data, electrical components, and optional equipment. Key details include a rated capacity of 1 tonne, lift height of 1650mm, travel speed of 7.5 km/h when laden, and standard 24V/300Ah batteries. The truck has side protection models, COMBI-MOSFET controls, brushless steering, and rides on Vulkollan tires.
The SL 780 Outdoor Giant is a multifunctional machine that can lift and maneuver large window sections for new buildings with its lifting height of 4000 mm and remote control of all hydraulic functions. It has wide tires that make it suitable for cross-country use and can lift and handle loads of almost a ton. The machine has hydraulic movements in all directions and side shift for exact window adjustment.
The TRH tractor from Antonio Carraro is designed for versatility with hydrostatic transmission allowing infinite speed variation in forward and reverse. It has a full chassis with 15 degrees of oscillation for stability on uneven terrain. The tractor can be configured with different tires, attachments, and a reversible control tower for changing the direction of work. It aims to improve productivity while reducing operator fatigue through features like hydrostatic transmission, speed control, and suspension seating.
The SL 608 Outdoor High Lifter is a powerful lift suitable for both indoor and outdoor use, such as on construction sites. It has a lifting height of 3700 mm and can lift loads up to 608 kg. The lift has features like front-wheel drive, dual rear wheels, foam-filled tires, electronic brakes, and a 100 mm sideshift for precise placement. It can be easily transported in a van or on a trailer.
When it comes to typical 5-axis machinings, the UMILL 1500 and Umill 1800 are well equipped for any application. The Umill 1500 and 1800 can show their perfomances in milling, drilling, tapping and turning in one set-up. Thanks to the portal construction, they reach optimum results due to their particularly stable and rigid design in combination with maximum dynamics and precision.
This document provides information about Soosan Cranes, a manufacturer of telescopic and articulated boom cranes and crane augers. It lists contact information for Soosan's headquarters in Korea and various international offices. It also provides technical specifications and details for several of Soosan's crane models, including their lifting capacities, boom dimensions, winch and slewing specifications. The document aims to showcase Soosan's product range and capabilities in lifting heavy loads for construction and other industrial applications.
A series mini range pallet stacker double column IIHangchavina
Xe nâng điện Hangcha loại mini II.
Catalog dành cho bản thương mại toàn cầu :
Xem và biết thêm chi tiết tại : https://hangchavina.com/product-category/xe-nang-dien/xe-nang-dien-mini/
This document provides specifications for the Yale MP20XD electric pedestrian double stacker, including its dimensions, performance data, electrical components, and optional equipment. Key details include a rated capacity of 1 tonne, lift height of 1650mm, travel speed of 7.5 km/h when laden, and standard 24V/300Ah batteries. The truck has side protection models, COMBI-MOSFET controls, brushless steering, and rides on Vulkollan tires.
The SL 780 Outdoor Giant is a multifunctional machine that can lift and maneuver large window sections for new buildings with its lifting height of 4000 mm and remote control of all hydraulic functions. It has wide tires that make it suitable for cross-country use and can lift and handle loads of almost a ton. The machine has hydraulic movements in all directions and side shift for exact window adjustment.
The TRH tractor from Antonio Carraro is designed for versatility with hydrostatic transmission allowing infinite speed variation in forward and reverse. It has a full chassis with 15 degrees of oscillation for stability on uneven terrain. The tractor can be configured with different tires, attachments, and a reversible control tower for changing the direction of work. It aims to improve productivity while reducing operator fatigue through features like hydrostatic transmission, speed control, and suspension seating.
The SL 608 Outdoor High Lifter is a powerful lift suitable for both indoor and outdoor use, such as on construction sites. It has a lifting height of 3700 mm and can lift loads up to 608 kg. The lift has features like front-wheel drive, dual rear wheels, foam-filled tires, electronic brakes, and a 100 mm sideshift for precise placement. It can be easily transported in a van or on a trailer.
When it comes to typical 5-axis machinings, the UMILL 1500 and Umill 1800 are well equipped for any application. The Umill 1500 and 1800 can show their perfomances in milling, drilling, tapping and turning in one set-up. Thanks to the portal construction, they reach optimum results due to their particularly stable and rigid design in combination with maximum dynamics and precision.
This document provides information about Soosan Cranes, a manufacturer of telescopic and articulated boom cranes and crane augers. It lists contact information for Soosan's headquarters in Korea and various international offices. It also provides technical specifications and details for several of Soosan's crane models, including their lifting capacities, boom dimensions, winch and slewing specifications. The document aims to showcase Soosan's product range and capabilities in lifting heavy loads for construction and other industrial applications.
A series mini range pallet stacker double column IIHangchavina
Xe nâng điện Hangcha loại mini II.
Catalog dành cho bản thương mại toàn cầu :
Xem và biết thêm chi tiết tại : https://hangchavina.com/product-category/xe-nang-dien/xe-nang-dien-mini/
This document provides specifications for an agricultural tractor. It has a 4-cylinder Deutz diesel engine producing 59.7 kW of power. It uses a hydrostatic transmission with continuous speed control from 0-35 km/h. Additional features include a twin steering system with front axle and central articulation steering, hydraulic lift, brakes on all four wheels, and options for a cab and additional hydraulic valves.
For clamping, rotation and tilting of pipes with round pro- files in manual or automatic welding, mainly in the field of pipe construction (prefabrication and assembly on site) as well as in the manufacture of plant.
Jost’s Platform Truck have proven to be industrial work horses & are being extensively used for carrying non-palletised loads ranging from 1000kg to 4000kg
The document provides specifications for the Narrow Aisle Lift Truck model CDD15C. It has a load capacity of 1500kg, with regenerative braking, adjustable driving speed up to 10km/h, and electric power steering for easy and safe maneuvering. Key features include finger-tip joystick control, optional manual or automatic stabilizers for stability, multi-function display, and side battery replacement for convenience.
This document provides information about Carmec d.o.o., a Slovenian company that manufactures automotive machine tools and equipment. It lists several of their products including on-the-truck brake lathes, rim straightening machines, brake servicing machines, a hydro-pneumatic riveting machine, a swing head surface grinding and milling machine, a hydraulic valve guide press, a pressure tester for cylinder heads, a pneumatic cylinder head work station, and a horizontal boring machine. It provides specifications for some of these products.
The document summarizes the features of a FullElectricStacker truck. It has the following key features:
1. It uses an AC motor that eliminates carbon brush replacement and has a multi-function display to show battery level, fault codes, hours of use, and speed level.
2. It has safety features like an emergency reversing device, auto deceleration, overspeed protection, and emergency power disconnect.
3. It is designed for stability with a low center of gravity, vertical drive wheel, waterproof motor, and exchangeable mast and frame components.
4. Serviceability is improved through low battery protection, concentrated electronic components, CANbus wiring, and hall sensors that increase component life
The document summarizes the features of a FullElectricStacker truck. It has an AC motor that eliminates carbon brush replacement. It has multi-function displays and emergency safety features. The structural design has a low center of gravity for stability, vertical drive wheel for easy maintenance, and removable mast and frame parts. The electrical components use CANbus technology for reliability.
Tts Energy Company Presentation 3108 2011 Ver B Aug2011aarshipathan
TTS Energy AS , Norway is supplier of the High performance drilling equipment packages to the global oil & gas drilling contractors , Shipyards & owners etc
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
Operators for rolling shutters.
H4 is the ideal solution for operating all kinds of rolling shutters with 200 or 220 mm (7.87 or 8.66 in) spring balancing and 48 or 60 mm (1.89 or 2.36 in) diameter winder pole. Several models are available, either irreversible or reversible ones, for up to 180 kg (397 lb) of maximum hoisting strength, all with built-in manually adjustable endstops requiring no tools. H4 is suitable for applying to shutters in commercial and apartment block settings.
Piletec Brochure - Piling Hammer BrochureLewis Ryan
Piletec Brochure with our full range of EMV, FSV, Croppers, Culvert Puller, Vibration Monitors and Augers.
Specifications of all equipment on offer to hire today.
View the UK's largest fleet of piling attachments.
The document provides product information on the ORION LPE240 pedestrian pallet truck. It has a rated capacity of 2400 kg and travels at up to 8 km/h when fully loaded. Key features include a compact 790mm wide chassis for tight spaces, comfortable steering arm, contactless controls for smooth driving, regenerative braking, and multiple battery options. It has a lift height of up to 225mm and can handle pallets, rolls, and other materials. Optional accessories include load supports, back rests, guards, climber skids, and cold weather components.
This document provides specifications for several lifting cranes produced by Gruniverpal S.r.l. It lists details like maximum load capacity, dimensions, battery and motor specifications for models JT400_TR, JT450_TR, and JT600. The cranes have features like proportional control of movements, overload safety systems, and certifications to European safety standards. They are designed for use in industrial applications like machine shops.
Atv catalogue freins a disque industriels 05-2016-enmaha mosawi
This document provides specifications for various industrial disc brakes manufactured by ATV. It includes solid discs with thicknesses of 12.7 or 15 mm and ventilated discs with a thickness of 30 mm and hub. Fail-safe brakes are also described that use electric, hydraulic, or pneumatic actuators to apply braking force through friction linings in an emergency. Direct acting brakes use electromagnets, hydraulics, or pneumatics to control braking force. Technical details like dimensions, weights, inertia, torque limits, and maximum speeds are provided for many brake models.
This document describes and provides specifications for various paper cutting machines. It includes specifications for stack lifters, joggers, loading systems, and air tables that are part of cutting systems. It also provides details on several series of paper cutters (S, F, L series) including cutting sizes, motor power, weight, and cutting speed. Key components and dimensions are outlined. Finally, optional computer controlling systems are described.
This document provides information on lineshaft driven live roller conveyors. It describes the general operating principle where a drive shaft spans the length of the conveyor and transmits power to rollers. It then provides specifications for 1 3/8 inch diameter lineshaft conveyors, including dimensions, materials, speeds, load capacities and options. It also describes lineshaft driven curve and spur conveyors for turns and merges, listing available angles and dimensions.
AGT compact tractors offer versatility, adaptability, and economy. They are constructed for use in vineyards, orchards, steep and difficult terrain, as well as forestry, farming, and ground care. The tractors use modern components and simple technical design to ensure high quality with low-cost maintenance. AGT produces various models of compact tractors ranging from 27 kW to 45 kW that can be customized for different applications and terrains.
Increase efficiency, safety and ergonomics with Protema lifters.Donna Ross
Protema lifters are easy to maneuver and push forward making it almost effortless to transport goods to the intended location. You can pick up goods from a vertical or horizontal position, rotate, transport, turn and release with minimum effort.
This document provides specifications for an agricultural tractor. It has a 4-cylinder Deutz diesel engine producing 59.7 kW of power. It uses a hydrostatic transmission with continuous speed control from 0-35 km/h. Additional features include a twin steering system with front axle and central articulation steering, hydraulic lift, brakes on all four wheels, and options for a cab and additional hydraulic valves.
For clamping, rotation and tilting of pipes with round pro- files in manual or automatic welding, mainly in the field of pipe construction (prefabrication and assembly on site) as well as in the manufacture of plant.
Jost’s Platform Truck have proven to be industrial work horses & are being extensively used for carrying non-palletised loads ranging from 1000kg to 4000kg
The document provides specifications for the Narrow Aisle Lift Truck model CDD15C. It has a load capacity of 1500kg, with regenerative braking, adjustable driving speed up to 10km/h, and electric power steering for easy and safe maneuvering. Key features include finger-tip joystick control, optional manual or automatic stabilizers for stability, multi-function display, and side battery replacement for convenience.
This document provides information about Carmec d.o.o., a Slovenian company that manufactures automotive machine tools and equipment. It lists several of their products including on-the-truck brake lathes, rim straightening machines, brake servicing machines, a hydro-pneumatic riveting machine, a swing head surface grinding and milling machine, a hydraulic valve guide press, a pressure tester for cylinder heads, a pneumatic cylinder head work station, and a horizontal boring machine. It provides specifications for some of these products.
The document summarizes the features of a FullElectricStacker truck. It has the following key features:
1. It uses an AC motor that eliminates carbon brush replacement and has a multi-function display to show battery level, fault codes, hours of use, and speed level.
2. It has safety features like an emergency reversing device, auto deceleration, overspeed protection, and emergency power disconnect.
3. It is designed for stability with a low center of gravity, vertical drive wheel, waterproof motor, and exchangeable mast and frame components.
4. Serviceability is improved through low battery protection, concentrated electronic components, CANbus wiring, and hall sensors that increase component life
The document summarizes the features of a FullElectricStacker truck. It has an AC motor that eliminates carbon brush replacement. It has multi-function displays and emergency safety features. The structural design has a low center of gravity for stability, vertical drive wheel for easy maintenance, and removable mast and frame parts. The electrical components use CANbus technology for reliability.
Tts Energy Company Presentation 3108 2011 Ver B Aug2011aarshipathan
TTS Energy AS , Norway is supplier of the High performance drilling equipment packages to the global oil & gas drilling contractors , Shipyards & owners etc
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
Operators for rolling shutters.
H4 is the ideal solution for operating all kinds of rolling shutters with 200 or 220 mm (7.87 or 8.66 in) spring balancing and 48 or 60 mm (1.89 or 2.36 in) diameter winder pole. Several models are available, either irreversible or reversible ones, for up to 180 kg (397 lb) of maximum hoisting strength, all with built-in manually adjustable endstops requiring no tools. H4 is suitable for applying to shutters in commercial and apartment block settings.
Piletec Brochure - Piling Hammer BrochureLewis Ryan
Piletec Brochure with our full range of EMV, FSV, Croppers, Culvert Puller, Vibration Monitors and Augers.
Specifications of all equipment on offer to hire today.
View the UK's largest fleet of piling attachments.
The document provides product information on the ORION LPE240 pedestrian pallet truck. It has a rated capacity of 2400 kg and travels at up to 8 km/h when fully loaded. Key features include a compact 790mm wide chassis for tight spaces, comfortable steering arm, contactless controls for smooth driving, regenerative braking, and multiple battery options. It has a lift height of up to 225mm and can handle pallets, rolls, and other materials. Optional accessories include load supports, back rests, guards, climber skids, and cold weather components.
This document provides specifications for several lifting cranes produced by Gruniverpal S.r.l. It lists details like maximum load capacity, dimensions, battery and motor specifications for models JT400_TR, JT450_TR, and JT600. The cranes have features like proportional control of movements, overload safety systems, and certifications to European safety standards. They are designed for use in industrial applications like machine shops.
Atv catalogue freins a disque industriels 05-2016-enmaha mosawi
This document provides specifications for various industrial disc brakes manufactured by ATV. It includes solid discs with thicknesses of 12.7 or 15 mm and ventilated discs with a thickness of 30 mm and hub. Fail-safe brakes are also described that use electric, hydraulic, or pneumatic actuators to apply braking force through friction linings in an emergency. Direct acting brakes use electromagnets, hydraulics, or pneumatics to control braking force. Technical details like dimensions, weights, inertia, torque limits, and maximum speeds are provided for many brake models.
This document describes and provides specifications for various paper cutting machines. It includes specifications for stack lifters, joggers, loading systems, and air tables that are part of cutting systems. It also provides details on several series of paper cutters (S, F, L series) including cutting sizes, motor power, weight, and cutting speed. Key components and dimensions are outlined. Finally, optional computer controlling systems are described.
This document provides information on lineshaft driven live roller conveyors. It describes the general operating principle where a drive shaft spans the length of the conveyor and transmits power to rollers. It then provides specifications for 1 3/8 inch diameter lineshaft conveyors, including dimensions, materials, speeds, load capacities and options. It also describes lineshaft driven curve and spur conveyors for turns and merges, listing available angles and dimensions.
AGT compact tractors offer versatility, adaptability, and economy. They are constructed for use in vineyards, orchards, steep and difficult terrain, as well as forestry, farming, and ground care. The tractors use modern components and simple technical design to ensure high quality with low-cost maintenance. AGT produces various models of compact tractors ranging from 27 kW to 45 kW that can be customized for different applications and terrains.
Increase efficiency, safety and ergonomics with Protema lifters.Donna Ross
Protema lifters are easy to maneuver and push forward making it almost effortless to transport goods to the intended location. You can pick up goods from a vertical or horizontal position, rotate, transport, turn and release with minimum effort.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. 59
#GiulianoAutomotive
INDEX
#GiulianoAutomotive
TYRE-CHANGERS -TRUCK & BUS FLEETS
For truck and bus fleets, professional truck
tyre service and mid-volume shops. Suitable
for both tube and tubeless tyres.
Hydraulic movement
of clamping chuck
holding arm (up-down).
Hydraulic travel
movement of
operating arm
carriage (left-right).
Operating arm and
clamping chuck arm
facing each other.
Clamping chuck minimum height from ground 330 mm (center).
Wheel clamping by fully
hydraulic operated jaws.
Rim center hole clamping range ø 80 - 700 mm.
Multistage
clamping jaws
STANDARD FEATURES
Blue Trim
BlackTrim
Red Trim
Available in:
Short bead lifting lever
Long bead lifting lever, for
agriculture tyres
Mounting clamp for steel rims
STANDARD ACCESSORIES
Rim clamping range 13” - 27”
Max. tyre diameter 1600 mm (63”)
Max. tyre width 780 mm (30”)
Bead breaker force 18300 N
Operating pressure 130 Bar (1885 Psi)
Power supply 400V - 3ph * 1 speed
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,1 kW
Net weight 500 kg
Max. Tyre Assembly weight 1500 kg
Max. overall dimensions 1750 x 2200 x 1270
* Other voltages and frequencies available upon request
M
i
d
Volume
4
0
0
V-3ph 1V
TRUCK TYRE CHANGER 13” - 27” FOR TRUCK AND BUS WHEELS
1270
1750
2200
Watch
the video
MAIN OPTIONAL ACCESSORIES Find out more on our website !
X8
X4
X4
X4
Compact and robust machine at a very convenient price.
All motions controlled by console on pivoting arm.
Hydraulic
movement
Hydraulic
movement
Low profiled platform eases the loading of heavy wheels.
ON/OFF switch on control console.
Designed, built and
engineered in Italy.
Compact, robust,
space saving design.
Operating arm manual tilting
and travelling on carriage.
Double tool (tubeless
roller + finger)
manual rotation.
Efficient and space-saving machine.
www.giuliano-automotive.com
S556
S556
3. 60 #GiulianoAutomotive
INDEX #GiulianoAutomotive
TRUCK TYRE CHANGER 13” - 27” FOR TRUCK AND BUS WHEELS
S557
Rim clamping range 13” - 27”
Max. tyre diameter 1600 mm (63”)
Max. tyre width 780 mm (30”)
Bead breaker force 18300 N
Operating pressure 130 bar (1885 Psi)
Power supply 400V - 3ph / 2 speed *
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 560 kg
Max. tyre assembly weight 1500 kg
Max. overall dimensions 1430÷1750x1550÷1740x1270 mm
TYRE-CHANGERS -TRUCK & BUS FLEETS
1430÷1750 mm
1270
mm
1
5
5
0
÷
1
7
4
0
m
m
For truck and bus fleets, professional truck tyre
service and high volume shops. Suitable for both
tube and tubeless tyres.
Hydraulic movement
of clamping chuck
holding arm (up-down).
Suitable for control console installation
on pivoting arm (optional).
Hydraulic travel
movement of
operating arm
carriage (left-right).
Emergency safety
button on control
console, for stopping
all functions.
Operating arm and
clamping chuck arm
facing each other.
All motions controlled by
console and pedal box.
4
0
0
V-3ph 2V
H
i
g
h Volum
e
Clamping chuck minimum height from ground 330 mm (center).
Low profiled platform eases the loading of heavy wheels.
Wheel clamping by fully
hydraulic operated jaws.
Rim center hole clamping range ø 80 - 700 mm.
Multistage
clamping jaws
Watch
the video
Short bead lifting lever
Long bead lifting lever, for
agriculture tyres
Mounting clamp for steel rims
* Other voltages and frequencies available upon request
STANDARD FEATURES
STANDARD ACCESSORIES
Double tool (disk
+ finger) manual
rotation.
Operating arm manual tilting
and travelling on carriage.
Clamping chuck is
powered by two speed
electric motor.
Designed, built and engineered in Italy.
Blue Trim
BlackTrim
Red Trim
Available in:
Hydraulic
movement
COMPACT tyre changer for INTENSIVE USE.
Hydraulic movement
www.giuliano-automotive.com
S557
4. 61
#GiulianoAutomotive
INDEX
#GiulianoAutomotive
Hydraulic
movement
Adjustable
support-foot.
Rim clamping range 13” - 27”
Max. tyre diameter 1600 mm (63”)
Max. tyre width 870 mm (34”)
Bead breaker cylinder force 18760 N
Rim center hole minimum clamping
diameter
80 mm
Operating pressure 130 Bar (1885 Psi)
Power supply 400V - 3ph *
Hydraulic pump motor power 2,2 kW 400V 3ph
Clamping chuck motor Hydraulic
Net weight 543 kg
Generator + Compressor net weight 416 kg
Max. tyre assembly weight 1000 kg
Max. overall dimensions 1000x1030x1580 mm
Max. overall dimensions
with generator/compressor 1610x1030x1580 mm
* Other voltages and frequencies available upon request
TRUCK TYRE-CHANGERS -MOBILE TYRE SERVICE
For mobile service of truck, bus and road
transportation vehicle tyres. Suitable for
both tube and tubeless tyres.
STANDARD FEATURES
Kit of clamp protections in aluminium
with plastic inserts for alloy rims
G-Clamp for alu-rims
STANDARD ACCESSORIES
Watch
the video
TRUCK TYRE CHANGER 13” - 27” FOR MOBILE TYRE SERVICE
Clamping chuck minimum
height from ground 330 mm
(according to van’s floor height).
Rim center hole clamping
range ø 80 - 700 mm.
Hydraulic movement of clamping chuck holding arm (up-down).
Hydraulic travel movement of operating arm carriage (left-right).
Innovative double tool (nylon roller + finger) allows to
handle tyres either with or without a bead guide lever.
Emergency safety button on
control console and generator,
for stopping all functions.
Wheel clamping by fully hydraulic operated jaws.
Machine installation from the side or back door of the VAN.
Clamping chuck holding arm tilts outside the van-door.
Folds back inside the van after use.
Operating arm manual tilting and travelling on carriage.
Available in version without generator and compressor (optional).
See generator and compressor specs here below:
GENERATOR
Power - 10,6 kW / Supply - Diesel / Voltage - 230 V 1ph/400 V 3ph / Cooling - H2
O
COMPRESSOR
Capacity - 100 lt / Air flow - 650 lt/min / Voltage - 230V 1ph/400V 3ph
Also equipped with 2 air feeding plugs and hoses, complete with coilers
mt. 10, plus one extra electric plug for connecting 220V-1ph outlet.
1100 mm
1750
mm
Multi-stage clamping jaws
with nylon protectors for
alloy wheels.
1
2
3
4
5
6
7
Electro-hydraulic motor for clamping chuck rotation.
MIN. SIZE OF VAN’S
DOOR REQUIRED
FOR COMPLETE
ASSEMBLY’S
INSTALLATION.
L
o
w
Volume
4
0
0
V-3ph-1V
Completely hydraulic machine, fits in most popular commercial VANs.
Complete your
mobile tyre
service set with
S861 Balancer!!
www.giuliano-automotive.com
S562
S562
Blue Trim BlackTrim Red Trim
Available in:
Discover
Brochure!
5. 62 #GiulianoAutomotive
INDEX #GiulianoAutomotive
Hydraulic
movement
Short bead lifting lever
Long bead lifting lever, for
agriculture tyres
Mounting clamp for steel rims
Hydraulic movement
of clamping chuck
holding arm (up-down).
Suitable for control console installation
on pivoting arm (optional).
Hydraulic travel
movement of operating
arm carriage (left-right).
Double tool (disk
+ finger) manual
rotation.
Operating arm and clamping
chuck arm facing each other.
Operating arm manual tilting
and travelling on carriage.
All motions controlled by
console and pedal box.
Wheel clamping by fully hydraulic operated jaws.
Rim center hole clamping
range ø 80 - 1200 mm.
Clamping chuck is powered by two speed electric motor.
4
0
0
V-3ph 2V
H
i
g
h
Volum
e
Suitable for remote control installation
(optional). Replaces standard cables and
enables all functions control by radio transmission.
MAIN OPTIONAL ACCESSORIES
Built and engineered in Italy.
Emergency safety button on control console, for
stopping all functions.
Wide and low profiled platform eases the loading of
heavy wheels.
Find out more on our website !
80
mm
14”
-
58”
(optional)
14”
-
46”
Multistage
clamping jaws
Hydraulic
movement
Clamping chuck minimum height
from ground 315 mm (center).
HEAVY DUTY TRUCK TYRE CHANGER 14” - 46” / 58”
Watch
the video
STANDARD ACCESSORIES
Rim clamping range w/o extensions 14” - 46”
Rim clamping range with
extensions (optional)
14” - 58”
Max. tyre diameter 2300 mm (90,5”)
Max. tyre width 1100 mm (43”)
Bead breaker force 26900 N
Operating pressure 130 bar (1885 Psi)
Power supply 400V - 3ph / 2 speed *
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 830 kg
Max. tyre assembly weight 1500 kg
Max. overall dimensions 2000÷2450x1640÷2390x880÷1840
* Other voltages and frequencies available upon request
STANDARD FEATURES
Blue Trim
BlackTrim
Red Trim
Available in:
Essential for working with Agricultural wheels. Robust and reliable.
www.giuliano-automotive.com
S551 XL
For truck, bus and Agriculture tyres, professional
truck tyre service and high volume shops.
Suitable for both tube and tubeless tyres.
S551 XL
TYRE-CHANGERS - TRUCKS & HEAVY DUTY
6. 63
#GiulianoAutomotive
INDEX
#GiulianoAutomotive
Hydraulic movement
of clamping chuck
holding arm (up-down).
Hydraulic travel
movement of operating
arm carriage (left-right).
Double tool (disk
+ finger) manual
rotation.
Operating arm and clamping
chuck arm facing each other.
Operating arm manual tilting
and travelling on carriage.
All motions controlled by console and pedal box.
Wheel clamping by fully hydraulic operated jaws.
Rim center hole clamping
range ø 80 - 1200 mm.
Suitable for remote control installation
(optional). Replaces standard cables and
enables all functions control by radio transmission.
Engineered and Built in Italy.
Emergency safety button on control console, for stopping all functions.
Wide and low profiled platform eases the loading of heavy wheels.
Find out more on our website !
Multistage
clamping jaws
Clamping chuck minimum height
from ground 315 mm (center).
Watch
the video
STANDARD ACCESSORIES
TYRE-CHANGERS - HEAVY DUTY & MILITARY WHEELS
Rim clamping range w/o extensions 14” - 46”
Rim clamping range with
extensions (optional)
14” - 58”
Max. tyre diameter 2300 mm (90,5”)
Max. tyre width 1100 mm (43”)
Bead breaker force 26900 N
Operating pressure 130 bar (1885 Psi)
Power supply 400V - 3ph / 2 speed *
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 1025 kg
Max. tyre assembly weight 1500 kg
Max. overall dimensions 2000÷2450x1640÷2390x880÷1840
* Other voltages and frequencies available upon request
STANDARD FEATURES
The only existing tyre changer to service RUN-FLAT, military, armored and standard
tyres for trucks and heavy duty vehicles. Suitable for both tube and tubeless tyres.
Blue Trim
BlackTrim
Red Trim
Available in:
The ONLY existing tyre changer to work BOTH with ARMORED and STANDARD tyres.
HEAVY DUTY TYRE CHANGER FOR RUN-FLAT, MILITARY,
ARMORED AND STANDARD WHEELS
Hydraulic press set for fitting/
removing military and armored truck
and heavy duty tyres. Available ONLY in
combination with S551XL.
4
0
0
V-3ph 2V
H
i
g
h
Volum
e
www.giuliano-automotive.com
S551XL MP6
Clamping chuck is powered by two speed electric motor.
Combined with a set of hydraulic cyilnders
and pistons, and using dedicated accessories,
it is suitable for removing the solid band anchored
to the rim inside military and armored tyres.
Solid band anchored to the rim
inside military and armored tyres
Flanges for 16”/20” wheels Bead
breaking lever Centering brackets for
16”/20” wheels Extensions for 16”/20”
wheels (4 pieces) Mounting band
S551XL MP6
7. 64 #GiulianoAutomotive
INDEX #GiulianoAutomotive
Hydraulic
movement
Hydraulic
movement
Hydraulic movement
of clamping chuck
holding arm (up-down).
Suitable for control console installation
on pivoting arm (optional).
Hydraulic travel
movement of operating
arm carriage (left-right).
Double tool (disk
+ finger) manual
rotation.
Operating arm and clamping
chuck arm facing each other.
Operating arm automatic
tilting and travelling on carriage.
All motions controlled by
console and pedal box.
Wheel clamping by fully hydraulic operated jaws.
Rim center hole clamping
range ø 80 - 1200 mm.
4
0
0
V-3ph 2V
H
i
g
h
Volum
e
MAIN OPTIONAL ACCESSORIES Find out more on our website !
Clamping chuck minimum height
from ground 315 mm (center).
Watch
the video
TYRE-CHANGERS - TRUCKS & HEAVY DUTY
For truck, bus and Agriculture tyres, professio-
nal truck tyre service and high volume shops.
Suitable for both tube and tubeless tyres.
Blue Trim
BlackTrim
Red Trim
Available in:
AUTOMATIC HEAVY DUTY TRUCK TYRE CHANGER 14” - 46” / 58”
STANDARD FEATURES
Rim clamping range w/o extensions 14” - 46”
Rim clamping range with
extensions (optional)
14” - 58”
Max. tyre diameter 2300 mm (90,5”)
Max. tyre width 1100 mm (43”)
Bead breaker force 26350 N
Operating pressure 130 bar (1885 Psi)
Power supply 400V - 3ph / 2 speed *
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 850 kg
Max. tyre assembly weight 1500 kg
Max. overall dimensions 2000÷2450x1800÷2250÷880x1840
* Other voltages and frequencies available upon request
Short bead lifting lever
Long bead lifting lever, for
agriculture tyres
Mounting clamp for steel rims
STANDARD ACCESSORIES
Hydraulic
movement
Clamping chuck is powered
by two speed electric motor.
AUTOMATIC movements for easy and professional operation on heavy duty tyres.
80
mm
14”
-
58”
(optional)
14”
-
46”
Multistage
clamping jaws
Suitable for remote control installation
(optional). Replaces standard cables and
enables all functions control by radio transmission.
Designed, built and engineered in Italy.
Emergency safety button on control console, for stopping all functions.
Wide and low profiled platform eases the loading of heavy wheels.
S551 XLA
www.giuliano-automotive.com
S551 XLA
8. 65
#GiulianoAutomotive
INDEX
#GiulianoAutomotive
Hydraulic movement of clamping
chuck holding arm (up-down).
Hydraulic travel movement of
operating arm carriage (left-right).
Operating arm and clamping
chuck arm facing each other.
Wide and low profiled platform
eases the loading of heavy wheels.
Wheel clamping by fully hydraulic operated jaws.
Hydraulic
movement
Hydraulic
movement
Suitable for control console installation
on pivoting arm (optional).
I
n
t
e
nsive us
e
4
0
0
V-3ph 2V
Rim center hole clamping
range ø 80 - 1200 mm.
Clamping chuck minimum
height from ground 315 mm (center).
Short bead lifting lever
Long bead lifting lever, for
agriculture tyres
Mounting clamp for steel rims
Designed, built and engineered in Italy.
MAIN OPTIONAL ACCESSORIES Find out more on our website !
Watch
the video
STANDARD ACCESSORIES
TYRE-CHANGERS - TRUCKS & HEAVY DUTY
Blue Trim
BlackTrim
Red Trim
Available in:
SUPER-AUTOMATIC HEAVY DUTY TRUCK TYRE CHANGER 14” - 46” / 58”
STANDARD FEATURES
Rim clamping range w/o extensions 14” - 46”
Rim clamping range with
extensions (optional)
14” - 58”
Max. tyre diameter 2400 mm (94,5”)
Max. tyre width 1300 mm (51”)
Power supply 400V - 3ph / 2 speed *
Hydraulic pump motor power 1,5 kW
Gearbox motor power 1,85 / 2,5 kW
Operating pressure 140 bar (2031 psi) ±10%
Bead breaker force 36000 N
Net weight 1025 kg
Max. tyre assembly weight 1800 kg
Max. overall dimensions 2210÷2850x1840÷2050x970÷1900
* Other voltages and frequencies available upon request
Emergency safety button on control console,
for stopping all functions.
All motions controlled by console and pedal box.
Clamping chuck is powered by two speed electric motor.
Excellent quality machine capable of handling earth moving wheels.
80
mm
14”
-
58”
(optional)
14”
-
46”
Multistage
clamping jaws
Hydraulic
movement
Hydraulic movement
Double tool (disk + finger)
automatic rotation.
Operating arm automatic tilting
and travelling on carriage.
Suitable for remote control installation
(optional). Replaces standard cables and
enables all functions control by radio transmission.
For truck, bus, agriculture and Earth-moving heavy
tyres, professional truck tyre service and high volume
shops. Suitable for both tube and tubeless tyres.
www.giuliano-automotive.com
S560
S560
9. 66 #GiulianoAutomotive
INDEX #GiulianoAutomotive
Hydraulic movement of clamping
chuck holding arm (up-down).
Hydraulic travel movement of
operating arm carriage (left-right).
Operating arm and clamping
chuck arm facing each other.
Wide and low profiled platform
eases the loading of heavy wheels.
Wheel clamping by fully hydraulic operated jaws.
Hydraulic
movement
Hydraulic
movement
Suitable for control console installation on pivoting arm (optional).
I
n
t
e
nsive us
e
4
0
0
V
-3ph-Vari
a
b
l
e
Rim center hole clamping
range ø 80 - 1200 mm.
Electro-hydraulic control unit
with “stand-by” function to
reduce energy consumption.
Double tool (disk + finger)
automatic rotation.
Operating arm automatic tilting
and travelling on carriage.
Clamping chuck minimum
height from ground 315 mm (center).
Short bead lifting lever
Long bead lifting lever,
for agriculture tyres
Mounting clamp for
steel rims
Tyre tread sculpting kit
Emergency safety button on control console,
for stopping all functions.
All motions controlled by console and pedal box.
Built and engineered in Italy.
MAIN OPTIONAL ACCESSORIES Find out more on our website !
Watch
the video
STANDARD ACCESSORIES
TYRE-CHANGERS - TRUCKS & HEAVY DUTY
Blue Trim
BlackTrim
Red Trim
Available in:
SUPER-AUTOMATIC HEAVY DUTY TRUCK TYRE CHANGER 14” - 46” / 58”
STANDARD FEATURES
Rim clamping range w/o extensions 14” - 46”
Rim clamping range with extensions
(optional) 14” - 58”
Max. tyre diameter 2500 mm (98”)
Max. tyre width 1500 mm (59”)
Power supply 3ph, 230/400V 50 Hz*
Rim center hole minimum clamping
diameter 80 mm
Hydraulic pump motor power 4,5 kW
Gearbox motor Hydraulic
Operating pressure 140 bar (2031 psi) ±10%
Bead breaker force 36000 N
Net weight 1055 kg
Max. tyre assembly weight 1800 kg
Clamping chuck rotation speed 1.5, 2, 3 ... 9 rpm
Max. overall dimensions 2470÷2950x2140÷2350x970÷1900
* Other voltages and frequencies available upon request
Hydraulic motor grants extreme precision even on heavy duty earth moving wheels.
80
mm
14”
-
58”
(optional)
14”
-
46”
Multistage
clamping jaws
Suitable for remote control installation
(optional). Replaces standard cables and
enables all functions control by radio transmission.
For truck, bus, agriculture and earth-moving heavy tyres, professional truck tyre
service and high volume shops. Suitable for both tube and tubeless tyres.
Clamping chuck is powered by a variable speed hydraulic motor.
Simultaneous
movement of operating
arm travelling, tilting and
tool rotation (by same
control button). Speed,
efficiency and total safety.
Hydraulic
movement
Hydraulic
movement
www.giuliano-automotive.com
S560 Pro
S560 PRO
Discover Brochure!
10. 67
#GiulianoAutomotive
INDEX
#GiulianoAutomotive
Hydraulic
movement
Hydraulic movement
Hydraulic movement of clamping
chuck holding arm (up-down).
Hydraulic travel movement of
operating arm carriage (left-right).
Operating arm and clamping
chuck arm tilting in same
direction, working always
with 90° angle.
Wide and low profiled platform eases the loading of heavy wheels.
Wheel clamping by fully hydraulic operated jaws.
Hydraulic
movement
Suitable for control console installation
on pivoting arm (optional).
Rim center hole clamping
range ø 80 - 1200 mm.
Electro-hydraulic control unit with
“stand-by” function to reduce
energy consumption.
Clamping chuck minimum
height from ground 365 mm (center).
Suitable for remote control installation (optional). Replaces standard
cables and enables all functions control by radio transmission.
MAIN OPTIONAL ACCESSORIES Find out more on our website !
Watch
the video
TYRE-CHANGERS - TRUCKS & HEAVY DUTY
Blue Trim
BlackTrim
Red Trim
Available in:
SUPER-AUTOMATIC HEAVY DUTY TRUCK TYRE CHANGER 12” - 46” / 58”
I
n
t
e
nsive us
e
4
0
0
V-3ph Inv
e
r
t
e
r
Work easily and SAFELY on wheels lifted just few centimeters from the ground !
80
mm
14”
-
58”
(optional)
14”
-
46”
Multistage
clamping jaws
For truck, bus, agriculture and earth-moving heavy tyres, professional truck tyre
service and high volume shops. Suitable for both tube and tubeless tyres.
Emergency safety button on control console, for stopping all functions.
All motions
controlled by
console and
pedal box.
Clamping chuck is powered by a 3 speed
motoinverter, suitable for tyre sculpting.
Short bead lifting lever
Long bead lifting lever,
for agriculture tyres
Bead guide lever
Mounting clamp for
steel rims
STANDARD ACCESSORIES
* Other voltages and frequencies available upon request
Rim clamping range w/o extensions 12” - 46”
Rim clamping range with extensions (optional) 12” - 58”
Max. tyre diameter 2600 mm (102”)
Max. tyre width 1530 mm (60”)
Rim center hole minimum clamping diameter 80 mm
Clamping chuck minimum height from ground 365 mm
Max. Tyre Assembly weight 2000 kg
3 speed clamping chuck rotation 1 - 4 - 9 rpm
Chuck motor power 2,2 kW
Hydraulic pump motor power 3 kW
Hydraulic pressure 160 bar (2320 psi)
Electric power supply 3ph 400 V
50/60 Hz-3 speed*
Bead breaker force 37600 N
Net Weight 1370 Kg
Max. overall dimensions 2420÷3150x2350÷2600x1030÷1970
STANDARD FEATURES
Double tool (disk + finger)
hydraulic automatic rotation.
Operating arm hydraulic automatic
tilting and travelling on carriage.
Hydraulic
movement
Synchronized travelling
movement of clamping
chuck arm and tool
carriage allows to speed
up operations on the
wheel.
Just few centimeters from the ground !!
www.giuliano-automotive.com
S558
S558
Discover Brochure!
11. 77
www.giuliano-automotive.com
OPTIONAL ACCESSORIES FOR TRUCK TYRE-CHANGERS Code
TBSR 1
Roller tool for mounting / demounting tubeless truck tyres
9299274
TBSR 1 AD
Tubeless roller adaptor (only for S558, S560, S560 Pro)
9219118
TBSR 2
Roller tool for mounting / demounting tubeless truck tyres
(only for S557)
9218165
DT 2
Double mounting tool with bead levers (only for S562)
9234434
NJP
Kit of spacers for the clamping jaws, for locking wheels with various thi-
ckness of flanging
9234966
BGL
Bead guide lever (only for S551XL and S551XLA)
9299269
DGC
Pair of bead clamp. Used on wheels with split ring, they allows bead bre-
aking of both rim and split ring.
9299273
SGC
Bead clamp with extra slide, for skidder tyre applications
9236972
PJP
Set of Professional Clamps Protections
9245058
AJP
Kit of clamp protections in aluminium with plastic inserts for alloy rims
9234826
AGC
G-Clamp for alu-rims
9299271
WGC
G-Clamp with wider bead-press angle, for agriculture tyres
9219656
X8
X4
X4
X4
12. 78 www.giuliano-automotive.com
OPTIONAL ACCESSORIES FOR TRUCK TYRE-CHANGERS Code
CEX
Kit of 4 clamp extensions for clamping range from 47” to 58” (only for
S551XL, S551XLA, S558, S560 and S560 Pro)
9235049
AD PLATE
Additional platform for special diameter wheels positioning on chuck only
for S551XL and S560 Pro
- 30mm height
- 80mm height
9234430
9244209
RCS 1
Multichannel radio control 433 MHz (only for S551XL)
9234777
RCS 2
Multichannel radio control 433 MHz (only for S558)
9238588
RCS 3
Multichannel radio control 433 MHz (only for S551XLA and S560)
9238598
RCS 4
Multichannel radio control 433 MHz (only for S562)
9244141
RCS 5
Multichannel radio control 433 MHz (only for S560Pro)
9245135
Sculpting Kit, installed on truck tyre changer for mobile service allows
the wheel to rotate at a reduced speed to sculpt the tyre tread using the
special tool (not supplied as standard). Only for S562.
9244309
01/2023
Giuliano Industrial S.p.A: Via Guerrieri, 6 - 42015 CORREGGIO (RE) ITALY
Tel. +39 0522 731111 - Telefax +39 0522 633109 - E-mail: info@giuliano-automotive.com - Internet: www.giuliano-automotive.com
01.23.43_B
01/2023