A quick presentation put together to inform students what kind of projects they should expect, how the class operates, when and where the class meets and other general info.
Original radiator design to accommodate a change in the coolant routing in the engine. This design also allowed the engine to be over cooled, thereby allowing the use of water restrictors and tape on the grill to calibrate energy transfer rates for given atmospheric conditions.
This study was performed to determine the projected cost of developing the programs MGB race to a prep level of F Production for competition in SCCA Club Racing.
The MIata required a larger diameter pulley in order to reduce the speed of the alternator relative to the crankshaft. With the engine operating at higher rpms for most of the on track time, we did not want to over charge the electrical system.
Video analysis showed that the inside tire was lifting during hard cornering. Symptoms were mid corner and exit understeer.
This led to research to determine the roll rate of the rear suspension through vehicle dynamics and spring rate calculations. Then, commercially available rear anti roll bars (ARB) were assessed and their spring rates calculated and compared to custom original designs.
In the end, due to lack of manufacturing ability and time, the commercially available rear ARB was purchased and installed.
Results: mid corner understeer corrected, exit understeer improved, vehicle cannot lift inside front tire.
Original radiator design to accommodate a change in the coolant routing in the engine. This design also allowed the engine to be over cooled, thereby allowing the use of water restrictors and tape on the grill to calibrate energy transfer rates for given atmospheric conditions.
This study was performed to determine the projected cost of developing the programs MGB race to a prep level of F Production for competition in SCCA Club Racing.
The MIata required a larger diameter pulley in order to reduce the speed of the alternator relative to the crankshaft. With the engine operating at higher rpms for most of the on track time, we did not want to over charge the electrical system.
Video analysis showed that the inside tire was lifting during hard cornering. Symptoms were mid corner and exit understeer.
This led to research to determine the roll rate of the rear suspension through vehicle dynamics and spring rate calculations. Then, commercially available rear anti roll bars (ARB) were assessed and their spring rates calculated and compared to custom original designs.
In the end, due to lack of manufacturing ability and time, the commercially available rear ARB was purchased and installed.
Results: mid corner understeer corrected, exit understeer improved, vehicle cannot lift inside front tire.
• An achievement-oriented professional with over 6 years of rich experience in Vehicle Testing, Quality Assurance, Operations & Maintenance, and Vehicle Audits
• Gained expertise in conducting process audits & product quality audits as well as controlling different mechanical elements inspection & testing processes
• Skilled in developing quality assurance plans & inspection plans for various Mechanical components from automobile sector components
• Hands-on experience in Assembly, Squeak & Rattle, and Roller & Brakes
• Implemented Kaizen in KIA Motors Corporation, Nigeria
• Got Best Road Test Associate certificate by durability Test Engineer from German Trainer while working with BMW India Pvt. Ltd.
• Skilled in managing process improvements and quality related activities involving resource planning, in-process inspection and co-ordination with internal departments
• Received training on United vehicle assembly plant various brands like (KIA, Skoda, General Motors) in Kazakhstan
The Baja SAE Series is an annual competition organized by the Society of Automotive Engineers and has the objective to encourage undergraduate students to design, manufacture and test and All-Terrain vehicle prototype. There are almost 100 participants and it was a good opportunity to put in practice the knowledge acquired in class. In 2010 we achieved the 1st place in design, it has been the highest achievement in the whole team’s history, and it was of course a consequence of our hard work. As Powertrain head I led several tests in order to characterize the dynamical behavior of the vehicle, these developments settles a good base for future generations.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
2. What Is SCCA Club Racing?
• Amateur drivers competing in production
based and purpose built race cars on a
closed circuit
• Cars are regulated by power-to-weight
ratio and Prep Level basis to regulate
competitiveness
• Drivers compete for points and trophies,
no prize money
• Wide demographic of drivers and crew
4. Previous MSTE 217-417 Projects
Past projects include:
• New rear brake package
• Front brake cooling
• New engine
• Rear suspension tuning (AKA Rear Anti-Roll Bar RARB)
• Refurbish all dampers
• Transmission rebuild
• Chassis dyno tuning
• Front upright re-design
• Exhaust system re-design
5. Spring 2015 Projects
• Lower the car at least 1” front and rear
• Remove weight from the car
• Diagnose and fix transmission leak
• Design and build FARB drop links
• Fabricate engine test stand for dyne
• Fabricate the new exhaust system
• Prep the car
• Compete with the car
6. Here’s How
• Utilizing this weekly scheduled meeting for planning and discussion
• Weekly scheduled work session for plan execution
• Required updates every week
• Regular communication through Oncourse
• Note: A successful student will spend 10 – 20 hours EACH week doing
class work
Questions?