Issues of added_ip_devices

•

0 likes•222 views

This document discusses issues with mosaic images appearing at the beginning of video recordings from added IP video devices, I/O controls and settings disappearing for devices with lost connections, and connection lost events not being logged. GeoVision has released patches to address these issues. The patches can be downloaded and installed by extracting the files to the GV-System folder.

Technology Education

Issues of the Added IP Video Devices

in GV-System and GV-NVR

Article ID: GV01-09-11-03
Release Date: 11/03/2009

Mosaic Images Appear at the Beginning of the Video Recordings

Applied to

GV-System and GV-NVR V8.3.1.0

In the Main System, the recorded images from the added IP video devices appeared mosaic
during the first two seconds of video recording. The mosaic images appeared only when there
was a motion in the camera view. The following picture shows an example of the mosaic
image that occurred in this situation.

Note:
1. The mosaic images only appeared on the video recordings of the added IP devices with
recording codec set to H.264 and MPEG-4. Such images did not appear while using the
JPEG code setting.
2. The mosaic images did not show on the live images.

GeoVision Inc. 1 Revision Date: 2009/11/4

I/O Control Panel and I/O Settings of an IP Video Device with a Lost
Video Connection Disappear

Applied to

GV-System and GV-NVR V8.3.1.0
GV-Video Server
GV-Compact DVR

After setting virtual I/O control to the added IP video devices such as GV-Video Server or
GV-Compact DVR with a lost video connection and then adding another IP video device to the
Main System, the I/O control panel for the IP video device with a lost video connection
disappeared from the main screen. And the virtual I/O settings for the IP video device also
disappeared.

GeoVision Inc. 2 Revision Date: 2009/11/4

Not Logging the Events of Connection Lost in System Log

Applied to

GV-NVR V8.3.1.0
GV-IP Camera

Although the System Log did not show any record of connection lost, the live-view screen
might display a message of connection lost from an added GV-IP Camera with dual codec for
streaming after you restarted the Main System several times. And the ViewLog kept on
recording under this condition.

GeoVision Inc. 3 Revision Date: 2009/11/4

Resolution
GeoVision has released patch files to fix the bugs and cure the above three symptoms.

How to Download and Install
Download the V8.3.1.2 patch file to your computer, and then unzip the files to the GV-System
folder.

Download Links
Czech Patch Download (file size 145 KB)
Danish Patch Download (file size 145 KB)
English Patch Download (file size 147 KB)
French Patch Download (file size 146 KB)
German Patch Download (file size 146 KB)
Hebrew Patch Download (file size 142 KB)
Hungarian Patch Download (file size 146 KB)
Italian Patch Download (file size 146 KB)
Japanese Patch Download (file size 303KB)
Polish Patch Download (file size 145KB)
Portuguese Patch Download (file size 145KB)
Russian Patch Download (file size 146 KB)
Serbian Patch Download (file size 145KB)
Spanish Patch Download (file size 145KB)
Simplified Chinese Patch Download (file size 147KB)
Traditional Chinese Patch Download (file size 145KB)

GeoVision Inc. 4 Revision Date: 2009/11/4

1) DMS (Device Management System) is a web-based remote device management system that allows unified management of embedded devices through features like remote monitoring, upgrades, control, and application deployment. 2) Traditional embedded device deployment faces challenges like high costs and complex maintenance due to issues like on-site installation and prehistoric remote update methods. 3) DMS aims to reduce total cost of ownership for customers by streamlining deployment, diagnostics, software updates, and support through its centralized remote management capabilities.

Managing Installations and Provisioning of OSGi Applications - Carsten Ziegeler

mfrancis

OSGi DevCon 2013 There are many different solutions for provisioning an OSGi application and maintaining its modules. The OSGi Installer from the Apache Sling project is a generic installation mechanism and supports bundles and configurations out of the box. It can be extended with other distribution formats like deployment packages or custom ones. The installation sources are pluggable as well, it ranges from file system to data stores like a Java content repository. This session introduces the installer and demonstrates how to utilize it to match own requirements from development to deployment. The different ways of provisioning starting with the file system up to more elaborate solutions is demonstrated as well as integration into other tools like the web console.

Android Security Development - Part 2: Malicious Android App Dynamic Analyzi...

Cheng-Yi Yu

Software update for IoT Embedded World 2017

Chris Simmonds

Windows 7 Deployment with ZCM11

Roel van Bueren

The document discusses Novell ZENworks Configuration Management (ZCM) 11. Key points include: - ZCM 11 features new UI, imaging bundle flags, asset inventory support, and Hyper-V/IPMI support. - Architectural changes include using a 64-bit JVM, upgrading to Tomcat 6.0, and changes to the ZENworks Adaptive Agent including adding .NET support. - ZCM 11 allows creation of various security policies including for USB devices, Windows configurations, local file access, printers, and power management. It also supports vPro/iAMT for out-of-band management of devices. - The document outlines deployment of Windows 7 using

10 ways hardware engineers can make software integration easier

Chris Simmonds

Upgrading the kernel

Shubhamg Gupta

Software update for IoT: the current state of play

Chris Simmonds

Prizm Content Connect is a lightweight document viewer flash control that allows applications to display and interact with different file formats like Microsoft Office documents. It provides a universal viewing solution and acts as a document container for embedding documents in a custom form or webpage. The viewer is lightweight, flexible and allows integrating an end-to-end solution using Office or other native format documents in a custom solution.

Quick and Easy Device Drivers for Embedded Linux Using UIO

Chris Simmonds

Distributed Compiler Icecc

SZ Lin

Icecc is a distributed compiler that allows compilation jobs to be distributed across multiple computers to reduce build times. It works by having one computer act as a scheduler that distributes preprocessing, compilation, and assembly jobs to other connected computers. The key requirements are that all computers must have the same toolchain installed and be on a fast network. Setting up Icecc involves configuring one computer as the scheduler, installing Icecc on all computers, and ensuring all toolchains are packaged and accessible in a shared location. Icecc has been shown to reduce Linux kernel compilation time by 75% by utilizing 3 additional computers during the build.

Embedded Android: Android beyond the smartphone

Chris Simmonds

We are all familiar with Android as an operating system for smarphones. Looking beyond that, Android is an open-source operating system that runs on top of Linux, which opens up a wide range of applications in the embedded space. Using Embedded Android, you get the well-known user interface, with it’s familiar touch screen gestures, and you get a well-known programming interface based on Java. So, why would you not want to consider Embedded Android?

Embedded Recipes 2017 - An easy-to-install real world embedded Linux distribu...

Anne Nicolas

Atom Linux is an open source project still in early starting phase. Its purpose is to give the user a way to easily create a robust and secure embedded Linux system. The user downloads a bootstrap image, then configures the utilities (servers…) and libraries needed by its custom code. Except its own code, he doesn’t need to do any compilation, the system automatically downloads prebuilt packages from the Atom Linux server. The Atom Linux system is built with robustness and security in mind. Among other features, it provides secured multi-partitioned update system and power supply fault tolerance. Christophe BLAESS, Logilin

Continuous integration

Aaron Eden

This document discusses the benefits of continuous integration. It describes the pain points of the previous system such as broken builds, manual testing and deployment. The new system uses a build server to continuously build every check-in. It also uses unit tests, automated deployment scripts, and pushes latest builds automatically to reduce errors and deployment time. The verdict is that build issues are now identified rapidly, regression tests provide higher confidence, deployments can be done by one person with no downtime and in only 6 minutes, and rollbacks are also quicker.

Quickboot on i.MX6

Gary Bisson

The document discusses techniques for optimizing boot time on i.MX6 systems. It begins with an overview of the typical boot process and available measurement tools. Generic optimization techniques are then presented, such as reducing system size, stripping unnecessary features, and choosing faster storage. Specific optimizations for the bootloader, kernel, and root file system are also covered. The presentation concludes with demonstrations of solutions that achieved boot times under 1 second for critical applications on i.MX6 hardware.

2016 manta raypresentation_av_scanning_disclaimer

Doug Koster

The document discusses automating anti-virus scanning using MantaRay, a set of Python modules that automate forensic tools. It describes how MantaRay allows examiners to select multiple tools, set options, and run scans without needing to manually run each tool. The document then demonstrates how to add anti-virus scanning capabilities to MantaRay by integrating open-source anti-virus tools like ClamAV, Avast, F-Protect, and BitDefender. It shows how to download, configure, and run the scanners using a configuration file to specify the command line and output formatting for each tool. The results demonstrate MantaRay can recursively scan directories and identify infected files found by each integrated anti-virus scanner

Adopting agile in an embedded platform Suryakiran Kasturi & Akhil Kumar

XP Conference India

Debian or Yocto Project? Which is the best for your Embedded Linux project?

Chris Simmonds

The document discusses the tradeoffs between using Debian vs. Yocto Project for embedded Linux projects. Debian offers a full and stable distribution with many packages but images can be large, may not be optimized for hardware, and updates are not atomic. Yocto Project allows fully customizing the system but has a steep learning curve. Debian is best for prototypes while Yocto is recommended for production on custom hardware.

Userspace drivers-2016

Chris Simmonds

Unified Extensible Firmware Interface (UEFI)

k33a

The document discusses Unified Extensible Firmware Interface (UEFI), which is a replacement for the older BIOS firmware. It aims to address limitations of BIOS like being based on 16-bit architecture and a non-graphical interface. UEFI uses a new GUID Partition Table scheme and supports 64-bit processors and longer mode. It provides standardized interfaces for booting an operating system and improved performance over BIOS. Major operating systems have implemented UEFI including Windows, Mac OS, and Linux.

Running Android on the Raspberry Pi: Android Pie meets Raspberry Pi

Chris Simmonds

You can run Android on a wide range of devices, not just phones and tablets. Building Android from scratch is fun and a great way to learn about the lower levels of the operating system. Imagine - here is a chance to create ANY Android configuration you want. In this presentation, I will show you how to take a Raspberry Pi 3 and build Android completely from scratch, using source code from the AOSP (Android Open Source Project). We will need a few things to make this work A Linux kernel that has been configured with the options that Android expects OpenGL ES graphics drivers HAL layers for graphics and networking, amongst other things

Vastmanual

TSOLUTIONS

This document provides an overview and instructions for using VIVOTEK's VAST video management software. The VAST system allows users to view live and recorded video from IP cameras across multiple monitors. It includes a server component and client component. The client software called VAST LiveClient allows users to view and manage live video, cameras, recordings and other system components from any location through a web browser.

(Gv compact dvrv2)acc-connection-updated100909-(t)

TSOLUTIONS

This document provides instructions for installing the GV-Compact DVR V2 Anti-Vibration model in a vehicle and elsewhere. It describes connecting the ACC wire to trigger recording based on the vehicle's ignition and connecting the power cable. The black ground wire should be connected to the vehicle's chassis or negative voltage. At other locations, a shorting cable simulates the ACC connection and a power adapter provides power.

Ip device integration_notes-updated110103

TSOLUTIONS

1. The document provides test results on the total frame rate and memory limits supported by GV-System for different resolutions, codecs, and CPU types. It also describes how to calculate the maximum number of IP cameras that can be connected based on these limits. 2. Workarounds to minimize CPU usage and connect more cameras include changing to less processor-intensive codecs, using dual video streams, and decreasing resolution and frame rate. 3. Hard disk performance can affect the system. The document outlines frame rate limits per disk for different resolutions and codecs to ensure optimal performance and avoid issues like frame dropping.

How to use_remote_view_log

TSOLUTIONS

The document provides instructions for using Remote ViewLog to play back video recordings from a GV-Series DVR on a GV-LPR system. It describes making configuration settings on both the DVR and GV-LPR sites to allow remote playback. These include enabling remote viewing on the DVR, setting up the integration in GV-LPR, matching cameras, and providing login credentials. It then explains how to search for and playback specific event recordings from the DVR on the GV-LPR system.

Tamara2331966

Sistema Binari1evelyn

Evelyn YB

faq white paper_st7501_with_2_mega_pixel_performance

TSOLUTIONS

The white paper summarizes the performance of VIVOTEK's ST7501 server program when monitoring 32 channels of IP7161 2-megapixel cameras. It finds that with 32 cameras streaming at 1600x1200 resolution, the ST7501 uses 36% CPU, 9.55% network utilization, and 53% physical memory. Performance scales linearly, with 4 cameras using 5% CPU and 1.71% network, and resources increasing predictably as more cameras are added.

faq streaming server_ver1.2

TSOLUTIONS

The document describes how to use the ST7501 streaming server to view live video streams from IP cameras. It provides instructions on getting the streaming URL from the local or remote server and viewing the streams in a media player like QuickTime. It also discusses setting up port forwarding to access streams over the internet and using the streaming server to allow more simultaneous connections than connecting directly to the cameras.

faq application event setup_quickguide_application

TSOLUTIONS

The document provides a quick guide on setting up event-triggered applications in Vivotek security cameras. It explains how to add servers and media settings, set up event triggers and conditions, and test the settings. Server settings allow specifying an SMTPS server for email alerts. Media settings allow selecting video clips to attach to emails. Events can be configured to trigger actions like emailing video when a digital output occurs every minute.

What's hot

Prizm Installation Guide

vjvarenya

Quick and Easy Device Drivers for Embedded Linux Using UIO

Chris Simmonds

Distributed Compiler Icecc

SZ Lin

Embedded Android: Android beyond the smartphone

Chris Simmonds

Embedded Recipes 2017 - An easy-to-install real world embedded Linux distribu...

Anne Nicolas

Continuous integration

Aaron Eden

Quickboot on i.MX6

Gary Bisson

2016 manta raypresentation_av_scanning_disclaimer

Doug Koster

Adopting agile in an embedded platform Suryakiran Kasturi & Akhil Kumar

XP Conference India

Debian or Yocto Project? Which is the best for your Embedded Linux project?

Chris Simmonds

Userspace drivers-2016

Chris Simmonds

Unified Extensible Firmware Interface (UEFI)

k33a

Running Android on the Raspberry Pi: Android Pie meets Raspberry Pi

Chris Simmonds

What's hot (13)

Prizm Installation Guide

Quick and Easy Device Drivers for Embedded Linux Using UIO

Distributed Compiler Icecc

Embedded Android: Android beyond the smartphone

Embedded Recipes 2017 - An easy-to-install real world embedded Linux distribu...

Continuous integration

Quickboot on i.MX6

2016 manta raypresentation_av_scanning_disclaimer

Adopting agile in an embedded platform Suryakiran Kasturi & Akhil Kumar

Debian or Yocto Project? Which is the best for your Embedded Linux project?

Userspace drivers-2016

Unified Extensible Firmware Interface (UEFI)

Running Android on the Raspberry Pi: Android Pie meets Raspberry Pi

Viewers also liked

Vastmanual

TSOLUTIONS

(Gv compact dvrv2)acc-connection-updated100909-(t)

TSOLUTIONS

Ip device integration_notes-updated110103

TSOLUTIONS

How to use_remote_view_log

TSOLUTIONS

Tamara2331966

Sistema Binari1evelyn

Evelyn YB

faq white paper_st7501_with_2_mega_pixel_performance

TSOLUTIONS

faq streaming server_ver1.2

TSOLUTIONS

faq application event setup_quickguide_application

TSOLUTIONS

Viewers also liked (9)

Vastmanual

(Gv compact dvrv2)acc-connection-updated100909-(t)

Ip device integration_notes-updated110103

How to use_remote_view_log

Tamara

Sistema Binari1evelyn

faq white paper_st7501_with_2_mega_pixel_performance

faq streaming server_ver1.2

faq application event setup_quickguide_application

Similar to Issues of added_ip_devices

GV-IP Device Integration Patch for GV-System V8.4

TSOLUTIONS

AU_NVR_V4.60.005 build220927_Release Notes.pdf

SunnyLai23

Compact dvrv3 integration_patch

TSOLUTIONS

1. This document provides instructions for installing integration patch files for GeoVision GV-Compact DVR V3 models to be used with GV-System V8.4.0.0. 2. It includes tables listing the patch file download links and installation paths for programs like IPCamInstall, GV-Systems, Center V2, Dispatch, IPMatrix, VSM, and Remote ViewLog. 3. The instructions specify to copy the relevant ini files and folders to the designated locations, replacing any existing files, to complete the upgrade.

Fisheye integration notes_updated101217

TSOLUTIONS

This document provides information on system requirements and maximum channel capacities for connecting Geovision fisheye cameras (GV-FE110, GV-FE111, GV-FE420, GV-FE421) to a GV-System. It outlines the patch files required to integrate the cameras and lists the maximum number of channels and frame rates supported for different camera models, mounting positions, resolutions, and PC specifications. Core i7 systems can support the highest channel counts and frame rates, up to 15 channels at 1280x1024 resolution for GV-FE110/111 models.

GeoVision : CCTV Solutions : GV-NVR Lite VS QNAP VS-2008 Pro

TSOLUTIONS

The document compares the GV-NVR System Lite NVR to the QNAP VS-2008 Pro NVR. It finds that the GV-NVR System Lite provides smoother live video, records video at full frame rates from multiple megapixel cameras, and makes exporting and playing back recorded video files faster and easier than the VS-2008 Pro. The GV-NVR System Lite also offers more flexible recording modes and supports the RTSP and PSIA protocols.

Remove DRM with AVS4Mac iTunes M4V Converter Plus for Windows

ChauvetPeng

Wallcam wireless kit manual

patnaglobal

This document provides instructions for setting up and using a Videocon WallCam WIFI security camera system. It includes directions for installing cameras and an NVR recorder, accessing live and recorded video on desktop/mobile devices, and adjusting system and recording settings. Key steps include connecting cameras and an NVR to power, connecting the NVR to a monitor, and downloading a mobile app to view live video remotely. The system can be managed through an on-screen menu to configure network, recording, and device settings.

ZENworks Configuration Management

Roel van Bueren

Read me

Ahmad Mamur

NaviFirm+ is a modified version of the NaviFirm tool that allows downloading firmware images and product codes directly from Nokia servers. Version 1.7 added additional product information in tooltips and improved data transfer speeds. It has undergone several updates since the original release to fix bugs and add new features such as downloading multiple files simultaneously and parsing VPL files.

Moviemaker

web4learn

Windows Live Movie Maker is a free video editing program introduced by Microsoft in 2011 that runs on Windows 7 and Vista but not Windows XP. It allows easy creation of movies and slideshows by importing various file formats like photos, video and audio. Key features include an intuitive interface, automatic movie generation, previewing of transitions and effects, audio adjustment to video length, and publishing options to share videos on websites, DVDs, devices or via email. Creating a basic movie can be done in just 30 seconds by importing content, arranging it on the timeline, adding titles and effects, and saving the final file.

Windows 7 SP1 deployment with ZENworks Configuration Management 11 SP1

Roel van Bueren

The document discusses Windows 7 deployment using ZENworks Configuration Management (ZCM). It covers new features in Windows 7 SP1, how to deploy Windows 7 images using ZCM imaging tools, migrating user profiles and applications, and ensuring application compatibility with Windows 7. Methods discussed include using the Windows Automated Installation Kit, Microsoft Deployment Toolkit, and ENGL Imaging Toolkit for capturing and deploying Windows images, and using ZENworks tools like AdminStudio and ZENworks Application Virtualization for application migration and compatibility.

Create your own DVD with Ulead Video Studio

SelmaSSatchell

Ulead VideoStudio 11.5 Plus is the new software Corel , which is semi-professional product for DVD authoring. The program interface and ease of use allow you to quickly create video presentations and high-quality DVD. The software installation is simple , although it may be challenging for the operating system; together with Ulead Video Studio package also components are installed such as Direct X Runtime, Microsoft Visual C ++ Redistribuible Package SP1, the Media Encoder 9 Series and Apple QuickTime video software.

How to set up Countdown Timers in Microsoft Teams

Paul Richards

Microsoft Teams is a great video communication tool that can be enhanced with all kinds of video elements by using OBS. OBS, stands for Open Broadcaster Software, and it is a video production software that supports a virtual webcam output. By using OBS with it’s virtual webcam output feature in Teams, you can overlay graphics and countdown timers in Teams. This is a great way to show meeting countdown timers, lower thirds graphics and much more.

Cân tiểu ly

Cường Phạm

Moviemaker

bje3a

Moviemaker finale

sarah-k

AVI/MPEG DVD/VCD/SVCD

crysatal16

1. The document discusses how to convert DVD movies and videos to formats supported by the Blackberry 8830 using Clone2go DVD to Blackberry Converter software. 2. It explains that many common video formats like DVD, AVI, FLV cannot be played on the Blackberry, so the software allows converting them to supported formats. 3. The process involves adding videos, choosing a profile, starting the conversion, and then transferring the output files to the Blackberry device.

Embedded Recipes 2019 - Testing firmware the devops way

Anne Nicolas

ITRenew is selling recertified OCP servers under the Sesame brand, those servers come either with their original UEFI BIOS or with LinuxBoot. The LinuxBoot project is pushing the Linux kernel inside bios flash and using userland programs as bootloader. To achieve quality on our software stack, as any project, we need to test it. Traditional BIOS are tested by hand, this is 2019 we need to do it automatically! We already presented the hardware setup behind the LinuxBoot CI, this talk will focus on the software. We use u-root for our userland bootloader; this software is written in Go so we naturally choose to use Go for our testing too. We will present how we are using and extending the Go native test framework `go test` for testing embedded systems (serial console) and improving the report format for integration to a CI. Julien Viard de Galbert

Video For Joomla

Linda Coonen

The document discusses several video extensions and services for Joomla. It describes extensions such as AllVideos, Seyret, JVideo, and RokBox. AllVideos is highlighted as an all-in-one media management solution for Joomla and a must-have extension. Seyret is the second most popular video management solution. JVideo offers features like video conversion and streaming. RokBox provides basic-level video conversion.

Embedded Recipes 2018 - swupdate: update your embedded device - Charles-Anto...

Anne Nicolas

Nowadays a lot of embedded system are connected to Internet. And every years, more devices are available in the market but without maintenance. Due to this situation, a lot of security issues raised which could compromised the lifetime of the product and the privacy of their users. To fix these bugs, these security issues or to add new features, updating remotely these systems on regular basis is very important. We have to think about update process for each new product, to be easy, reliable, efficient and not too costly for the required bandwidth or hardware performances. Several update designs are available to fit your requirements. Due to these constraints, you have to make choice and find the right balance. Hopefully one free software allows us to perform this task in a easy and flexible way: swupdate. This solution is very well integrated with U-boot, buildroot and Yocto. You can describe exactly how the update should be done. This talk is to explain the main designs to update an embedded system with pro and cons of all of them and then explain how to implement them with swupdate for your embedded system.

Similar to Issues of added_ip_devices (20)

GV-IP Device Integration Patch for GV-System V8.4

AU_NVR_V4.60.005 build220927_Release Notes.pdf

Compact dvrv3 integration_patch

Fisheye integration notes_updated101217

GeoVision : CCTV Solutions : GV-NVR Lite VS QNAP VS-2008 Pro

Remove DRM with AVS4Mac iTunes M4V Converter Plus for Windows

Wallcam wireless kit manual

ZENworks Configuration Management

Read me

Moviemaker

Windows 7 SP1 deployment with ZENworks Configuration Management 11 SP1

Create your own DVD with Ulead Video Studio

How to set up Countdown Timers in Microsoft Teams

Cân tiểu ly

Moviemaker

Moviemaker finale

AVI/MPEG DVD/VCD/SVCD

Embedded Recipes 2019 - Testing firmware the devops way

Video For Joomla

Embedded Recipes 2018 - swupdate: update your embedded device - Charles-Anto...

More from TSOLUTIONS

VIVOTEK Presentation : บรรยายพิเศษเทคโนโลยีระบบกล้องวงจรปิด IPCCTV Technology...

TSOLUTIONS

VIVOTEK Presentation : บรรยายพิเศษเทคโนโลยีระบบกล้องวงจรปิด IPCCTV Technology ม ขอนแก่น โดยนายศักดิ์ชัย สมสุข กรรมการผู้จัดการ บริษัท ทีโซลูชั่นส์ จำกัด โทร 025700444 www.tsolutions.co.th ขอบคุณสไลด์ของสินค้าที่มีในสไลด์มา ณ ที่นี้ด้วยครับ ข้อมูลทั้งหมดเพื่อการศึกษาของเด็กไทยให้สามารถแข่งขันได้ในอนาคต IP Camera supplier vivotek Arecont compro Industrial Camera Supplier leadex VMS Software geovision PSIM Intregration Software g-fin Cloud Based Software securenet

VIVOTEK Presentation : TSOLUTIONS : Integrated Security Solutions Provider fo...

TSOLUTIONS

GeoVision : Access Control Solutions : How to : Wiegand settings

TSOLUTIONS

This document provides instructions for setting up GV-Wiegand Capture to integrate with an access control system. It describes connecting the GV-Wiegand Capture device, configuring the Wiegand data format settings to match the card reader format, and testing the connection. The Wiegand data format is explained, including an example of the standard 26-bit format layout. Troubleshooting tips and instructions for getting help from technical support are also included if the correct format cannot be determined.

GeoVision : Access Control Solutions : Knowledge : AS Manager using MSSQL Server

TSOLUTIONS

1. The document provides instructions for using Microsoft SQL Server with GV-ASManager V2.0, including how to create and connect databases, and convert between Access and SQL database formats. 2. Key steps include installing prerequisites like DirectX and .NET Framework, then using the ASManager Database Setting dialog box to create, connect to, or convert between SQL Server and Access databases for configuration and log files. 3. Functions like database backup, recovery, and upgrading older versions from Access to SQL formats are also covered.

GeoVision : Video Management Solutions : How to : Upgrading GV-CMS CenterV2 C...

TSOLUTIONS

GeoVision : Access Control Solutions : How to : Upgrading AS Manager

TSOLUTIONS

GeoVision : Video Management Solutions : How to : Trigger GV-NVR Thru AS-200

TSOLUTIONS

The document describes how to configure a GV-AS200 controller and DVR to trigger recording based on door access. There are two applications: 1) Recording starts when an entry door is accessed and stops when an exit door is accessed, limiting access to one person. 2) Recording starts for a set time when any door is accessed, allowing multiple persons. Wiring the controller outputs to the DVR inputs triggers recording on door events. Settings include work mode, relay switches, and recording time length.

GeoVision : Video Management Solutions : Technology Solutions Index

TSOLUTIONS

The document provides a technical notice index for Geovision surveillance products. It lists technical notices organized by product category and date. The notices cover issues, compatibility problems, and how-to guides related to Geovision video systems, IP cameras, access control, mobile apps and other products. The index allows technicians to easily find relevant support documents to troubleshoot issues or learn how to use different Geovision solutions.

GeoVision : Access Control Solutions : Single Door with 2 times schedule

TSOLUTIONS

This document describes how to implement single door access control with separate entry and exit schedules using a GV-AS200 controller module. The inputs of doors A and B on the module are connected together to function as a single door. The module is configured for one-way traffic to allow different schedules for the entry and exit readers. Separate time schedules are assigned to doors A and B to determine when the door will open for entry or exit.

GeoVision : Video Management Solutions : Open Windows Firewall to allow Webca...

TSOLUTIONS

GeoVision : Intergation Solutions : GV-NVR and Access Control with PTZ preset...

TSOLUTIONS

1) The document describes how to set up preset functions on a PTZ camera connected to a GV-AS200 controller to monitor two doors. 2) A single PTZ camera is connected to both the Door B and Door D outputs of the GV-AS200 module. When Door A opens, the camera view moves to Door A, and when Door C opens it moves to Door C. 3) The steps include connecting card readers and wires between doors and camera inputs, setting the door relay switches to NO, and allowing accessibility of Doors B and D even when only Doors A and C are used.

GeoVision : CCTV Solutions : Set Noise tolerance to avoid false alarm

TSOLUTIONS

To reduce false motion detection alarms caused by grainy video under low light, the document recommends activating a camera's noise tolerance function. This allows adjusting the noise tolerance level to account for different amounts of video noise. Higher noise tolerance makes the camera more tolerant of noise, while increasing motion sensitivity makes it more sensitive to real motion. The noise tolerance setting can be configured for different motion detection and analysis functions in a camera's software.

GeoVision : CCTV Solutions : GV-NVR Sanyo connection issue

TSOLUTIONS

This case study examines a connection issue experienced by a customer using Sanyo IP cameras with a GV-NVR video management system. The cameras would disconnect and reconnect periodically. Testing showed the problem occurred when directly accessing the cameras and was not specific to the video management system. The cause was determined to be an issue with the Sanyo cameras disconnecting and reconnecting on their own. The customer reported the problem to Sanyo for resolution.

GeoVision : CCTV Solutions : Rename preset cause GV-NVR restart

TSOLUTIONS

GeoVision : CCTV Solutions : GV-NVR Remote error message

TSOLUTIONS

This document contains a list of error messages for various applications along with descriptions of common problems and suggested procedures. It includes error messages for CenterV2, SMS, VSM, Control Center, Matrix, Webcam applications for live viewing, playback, server, and EMap functions. The errors range from issues with graphics cards, network ports being in use, missing or disconnected dongles, incorrect passwords, low storage space, and more. Suggested procedures include changing settings, upgrading software, ensuring proper hardware connections, and contacting server administrators.

GeoVision : CCTV Solutions : Recording issue with Bosch IP Camera

TSOLUTIONS

GeoVision : CCTV Solutions : RAID vs Non-RAID System for Storing Surveillance...

TSOLUTIONS

This document discusses the pros and cons of using RAID vs non-RAID systems for storing surveillance video data. It recommends using a non-RAID system with regular backups rather than a RAID system due to RAID's reduced storage capacity, lack of complete data protection, and risk of data loss if fault tolerance is exceeded. It also provides guidelines for setting up a RAID 5 system if RAID is used.

GeoVision : CCTV Solutions : POS Display for Player

TSOLUTIONS

GeoVision : CCTV Solutions : Multicast solutions

TSOLUTIONS

This document provides instructions for performing multicast on different IP ranges within the same LAN. It requires that the router supporting the different IP ranges has multicast pass through enabled. An example is provided where a GV-System on the 192.168.0.0 range multicasts video to a host on the 10.0.0.0 range by connecting the routers, enabling multicast pass through on the second router, and allowing the multicast packets to be received across the different IP ranges.

GeoVision : CCTV Solutions : GV-NVR for Object counting

TSOLUTIONS

The document provides instructions to achieve higher accuracy for object counting using surveillance cameras. It discusses camera installation positioning the camera in the middle between two detection zones. It also recommends disabling auto gain control and auto white balance features if available, as well as properly configuring object size for the application and camera settings. System requirements of at least 512MB memory and a dual core CPU are required for 8 or more cameras.

More from TSOLUTIONS (20)