This document describes a study comparing the seismic behavior of an Intze water tank supported by different types of staging using finite element analysis software SAP2000. The tank is modeled with frame elements for the staging and thin shell elements for the tank walls, domes, etc. The study analyzes parameters like time period, base shear, stresses, displacements, and hydrodynamic pressures for a tank supported by either a frame staging or shaft staging. The results show that a tank with frame staging has a longer time period and lower stresses and base shear compared to one with shaft staging, which provides more lateral support.
check it out: http://goo.gl/vqNk7m
CADmantra Technologies pvt. Ltd. is a CAD Training institute specilized in producing quality and high standard education and training. We are providing a perfact institute for the students intersted in CAD courses CADmantra is established by a group of engineers to devlop good training system in the field of CAD/CAM/CAE, these courses are widely accepted worldwide.
#catiatraining
#ANSYS #CRE-O
#hypermesh
#Automobileworkshops
#enginedevelopment
#autocad
#sketching
check it out: http://goo.gl/vqNk7m
CADmantra Technologies pvt. Ltd. is a CAD Training institute specilized in producing quality and high standard education and training. We are providing a perfact institute for the students intersted in CAD courses CADmantra is established by a group of engineers to devlop good training system in the field of CAD/CAM/CAE, these courses are widely accepted worldwide.
#catiatraining
#ANSYS #CRE-O
#hypermesh
#Automobileworkshops
#enginedevelopment
#autocad
#sketching
Design analysis & comparsion of intze type water tank for different wind ...eSAT Journals
Abstract Any design of Water Tanks is subjected to Dead Load + Live Load and Wind Load or Seismic Load as per IS codes of Practices. Most of the times tanks are designed for Wind Forces and not even checked for Earthquake Load assuming that the tanks will be safe under seismic forces once designed for wind forces. In this study Wind Forces and Seismic Forces acting on an Intze Type Water tank for Indian conditions are studied. The effect of wind on the elevated structures is of prime importance as Wind flows relative to the surface of ground and generates loads on the structures standing on ground. Most of the designers consider the wind effect and neglect the seismic effect on the structure. The Indian Standard Code IS 875(Part-3) 2003 and IS 1893-2000 for Wind & Seismic effect is used in this study. The Elevated Structure is designed for various Wind forces i.e. 39 m/s, 44 m/s, 47 m/s & 50 m/s and the same is cross checked with different Seismic Zones i.e. Zone-II, Zone-III, Zone-IV, & Zone-V by ‘Response Spectrum Method’ and the maximum governing condition from both the forces is further used for design & analysis of staging. It is found from the analysis that the Total load, Total moments and Reinforcement in staging i.e. Columns, Braces & also for Raft foundation varies for Case-1, Case-2, Case-3 & Case-4. Key Words: Wind Load, Seismic Load, Intze Tank, and I.S.Codes etc…
Planning analysis design the overhead circular water tank in seerapalayam pan...Subash thangaraj
To forecasting the population of the seerapalayam panchayat. To calculate the estimation of water quantity need in Domestic, and industrial purpose. After the calculation planning analysis and design the overhead circular water tank in economically.
Time History Analysis of Circular and Rectangular Elevated Water Storage Tank...Dr. Amarjeet Singh
In the world, there are large number of storage tanks which are used as water and oil storage facilities. Elevated water tank is one of the most important structures in earthquake event. As known from very upsetting experiences, elevated water tanks were heavily damaged or collapsed during earthquake Hence different configurations of liquid storage tanks have been constructed. Water tanks are play an important role in municipal water supply and firefighting systems. Due to post earthquake useful desires, seismic safety of water tanks is most important. In the current study time history analysis of rectangular and circular elevated water storage tank were analyzed using SAP 2000 software. In this study the concrete baffle wall was used to reduce sloshing effect of the water tank. The tank responses such as maximum nodal displacement, base shear and result were compared for empty and full tank water fill condition. From IS 11682:1985provision when seismic loading is considered only two cases may be taken one is tank empty condition and other is tank full condition. Finally, study discloses the importance of suitable supporting baffle wall to remain withstand against heavy damages of circular and rectangular elevated water tanks during earthquake. As per IITK-GSDMA guidelines for seismic design of liquid storage tanks, hydrodynamic pressure for impulsive and convective mode was calculated.
Subsea Field Development for an ideal Green field.Emeka Ngwobia
• The Daiyeriton Field is a green field development project. The subsea field layout with its drill centers has been illustrated in slide 2. New flowlines and pipelines will tie-in to the existing Daiyeriton floating production, storage, and offloading (FPSO) vessel. The new system will enable the transportation of production and injection fluids to and from the Daiyeriton field facilities from five new drill centers: DC-SW, DC-NW, DC-SE, DC-NE and DC-E. DC-SE, DC-SW, DC-NE and DC-E are dedicated production drill centers while DC-NW is a dedicated WI drill center. Gas lift will be provided at the riser base of a new 12-inch production flowline.
•The water depth at the proposed development sites range from 800 m to 1000 m.
At 300 meters depth, we have it covered. But at depths up to 3000
meters, the physical conditions demand a radical re-think around
techniques and technology.
The presentation summarizes the project work done on "Seismic Analysis of Elevated Water Tank". Elevated water tanks are important structures that serve the function of supplying municipal water to the civil community. The stability of such structure is highly uncertain in the eve of earthquake. This project analyses the performance of such a structure in the eve of earthquake.
The project is done as a course requirement for undergraduate degree in May 2013. The degree in pursuit was "Bachelor of Technology in Civil Engineering" in National Institute of Technology in Tiruchirappalli (INDIA). The authors were in final year of the study during the making of the project.
Overview of main components of subsea production / injection systems, including:
Wellhead
Subsea tree (Vertical, Horizontal, or Drill-thru)
Structural foundation / Template / Manifold /Jumpers
Subsea processing equipment
Chemical injection system
Umbilical with electrical power and signal cables
Risers
Production Control and Monitoring System
Design analysis & comparsion of intze type water tank for different wind ...eSAT Journals
Abstract Any design of Water Tanks is subjected to Dead Load + Live Load and Wind Load or Seismic Load as per IS codes of Practices. Most of the times tanks are designed for Wind Forces and not even checked for Earthquake Load assuming that the tanks will be safe under seismic forces once designed for wind forces. In this study Wind Forces and Seismic Forces acting on an Intze Type Water tank for Indian conditions are studied. The effect of wind on the elevated structures is of prime importance as Wind flows relative to the surface of ground and generates loads on the structures standing on ground. Most of the designers consider the wind effect and neglect the seismic effect on the structure. The Indian Standard Code IS 875(Part-3) 2003 and IS 1893-2000 for Wind & Seismic effect is used in this study. The Elevated Structure is designed for various Wind forces i.e. 39 m/s, 44 m/s, 47 m/s & 50 m/s and the same is cross checked with different Seismic Zones i.e. Zone-II, Zone-III, Zone-IV, & Zone-V by ‘Response Spectrum Method’ and the maximum governing condition from both the forces is further used for design & analysis of staging. It is found from the analysis that the Total load, Total moments and Reinforcement in staging i.e. Columns, Braces & also for Raft foundation varies for Case-1, Case-2, Case-3 & Case-4. Key Words: Wind Load, Seismic Load, Intze Tank, and I.S.Codes etc…
Planning analysis design the overhead circular water tank in seerapalayam pan...Subash thangaraj
To forecasting the population of the seerapalayam panchayat. To calculate the estimation of water quantity need in Domestic, and industrial purpose. After the calculation planning analysis and design the overhead circular water tank in economically.
Time History Analysis of Circular and Rectangular Elevated Water Storage Tank...Dr. Amarjeet Singh
In the world, there are large number of storage tanks which are used as water and oil storage facilities. Elevated water tank is one of the most important structures in earthquake event. As known from very upsetting experiences, elevated water tanks were heavily damaged or collapsed during earthquake Hence different configurations of liquid storage tanks have been constructed. Water tanks are play an important role in municipal water supply and firefighting systems. Due to post earthquake useful desires, seismic safety of water tanks is most important. In the current study time history analysis of rectangular and circular elevated water storage tank were analyzed using SAP 2000 software. In this study the concrete baffle wall was used to reduce sloshing effect of the water tank. The tank responses such as maximum nodal displacement, base shear and result were compared for empty and full tank water fill condition. From IS 11682:1985provision when seismic loading is considered only two cases may be taken one is tank empty condition and other is tank full condition. Finally, study discloses the importance of suitable supporting baffle wall to remain withstand against heavy damages of circular and rectangular elevated water tanks during earthquake. As per IITK-GSDMA guidelines for seismic design of liquid storage tanks, hydrodynamic pressure for impulsive and convective mode was calculated.
Subsea Field Development for an ideal Green field.Emeka Ngwobia
• The Daiyeriton Field is a green field development project. The subsea field layout with its drill centers has been illustrated in slide 2. New flowlines and pipelines will tie-in to the existing Daiyeriton floating production, storage, and offloading (FPSO) vessel. The new system will enable the transportation of production and injection fluids to and from the Daiyeriton field facilities from five new drill centers: DC-SW, DC-NW, DC-SE, DC-NE and DC-E. DC-SE, DC-SW, DC-NE and DC-E are dedicated production drill centers while DC-NW is a dedicated WI drill center. Gas lift will be provided at the riser base of a new 12-inch production flowline.
•The water depth at the proposed development sites range from 800 m to 1000 m.
At 300 meters depth, we have it covered. But at depths up to 3000
meters, the physical conditions demand a radical re-think around
techniques and technology.
The presentation summarizes the project work done on "Seismic Analysis of Elevated Water Tank". Elevated water tanks are important structures that serve the function of supplying municipal water to the civil community. The stability of such structure is highly uncertain in the eve of earthquake. This project analyses the performance of such a structure in the eve of earthquake.
The project is done as a course requirement for undergraduate degree in May 2013. The degree in pursuit was "Bachelor of Technology in Civil Engineering" in National Institute of Technology in Tiruchirappalli (INDIA). The authors were in final year of the study during the making of the project.
Overview of main components of subsea production / injection systems, including:
Wellhead
Subsea tree (Vertical, Horizontal, or Drill-thru)
Structural foundation / Template / Manifold /Jumpers
Subsea processing equipment
Chemical injection system
Umbilical with electrical power and signal cables
Risers
Production Control and Monitoring System
Impact of Varying Height to Diameter Ratio of Intze Tank on Different Compone...ijtsrd
Intze tank is an important overhead water storage tank, there for it is necessary that it should be constructed keeping in view its economy. To obtain economical design of tank, the proportion of container such as, staging container diameter ratio, height of cylindrical wall container diameter ratio and horizontal angle of dome have been varied as well as no of column for design of staging. To achieve this objective 15 different depth to diameter ratio of Intze tank. For this purpose a computer program in Microsoft excel has been developed. In Microsoft excel program continuity correction have been work out. The design of container is carried out by working stress method but staging is carried out by using limit state method. To get the economical design of Intze tank horizontal angle of conical dome should be less than 45°, ratio of height of cylindrical wall and container diameter ratio should be between 0.3 and 0.35.0n the other hand staging container diameter ratio effects the economy of higher capacity of tank only. Ravi Shankar Kumar | Mr. Afzal Khan "Impact of Varying Height to Diameter Ratio of Intze Tank on Different Components and Cost of Tank" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62378.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/62378/impact-of-varying-height-to-diameter-ratio-of-intze-tank-on-different-components-and-cost-of-tank/ravi-shankar-kumar
Impact of Varying Height to Diameter Ratio of Intze Tank on Different Compone...ijtsrd
Intze tank is an important overhead water storage tank, there for it is necessary that it should be constructed keeping in view its economy. To obtain economical design of tank, the proportion of container such as, staging container diameter ratio, height of cylindrical wall container diameter ratio and horizontal angle of dome have been varied as well as no of column for design of staging. To achieve this objective 15 different depth to diameter ratio of Intze tank. For this purpose a computer program in Microsoft excel has been developed. In Microsoft excel program continuity correction have been work out. The design of container is carried out by working stress method but staging is carried out by using limit state method. To get the economical design of Intze tank horizontal angle of conical dome should be less than 45°, ratio of height of cylindrical wall and container diameter ratio should be between 0.3 and 0.35.0n the other hand staging container diameter ratio effects the economy of higher capacity of tank only. Ravi Shankar Kumar | Mr. Afzal Khan "Impact of Varying Height to Diameter Ratio of Intze Tank on Different Components and Cost of Tank" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62378.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/62378/impact-of-varying-height-to-diameter-ratio-of-intze-tank-on-different-components-and-cost-of-tank/ravi-shankar-kumar
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com