This document describes an intelligent energy monitoring system that uses web access to optimize energy usage. The system collects energy consumption data from homes and businesses using sensors connected to a NodeMCU microcontroller. The NodeMCU transmits the data via WiFi to a central server. The server analyzes the data using ThingSpeak analytics to generate detailed reports and visualizations of energy usage. This allows users to better manage their home energy usage. The system aims to reduce energy wastage, avoid power theft, and minimize the need for manual data collection from energy meters.
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
Hardware prototype of smart home energy management systemeSAT Journals
Abstract The development of ‘demand-side load management’ is the outcome of the smart grid initiative. Due to the significant amount of loads in the residential sector, home energy management has received increasing interest. In the country like India, we are lagging behind, in the power sector as the demand is much more than the supply. Moreover, there is not a single initiative, which has been taken for the deployment of smart suppliers and smart users. Here, I propose a hardware design of smart home energy management system (SHEMS). With the help of this proposed design, it is possible to have a real-time, price-responsive control strategy for domestic loads such as electrical water heater (EWH), illumination (Lights), air conditioning (Fan), dryer etc. Consumers may interact with suppliers or load serving entities (LSEs) to facilitate the load management at the supplier side. This system is designed with sensors to detect human activities and the behavior is predicted by applying a machine learning algorithm in order to help consumers reduce total payment on electricity. Finally, for the verification of the hardware system, simulation and experiment results will be checked based on an actual SHEMS prototype. Keywords: Demand side load management, Load Serving Entity (LSE), Smart Home Energy Management System (SHEMS), Smart Grid.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Is a seminar based on the concept of replacing the existing electricity metering system using in developing countries by a low cost energy meter working without human intervention. Its main components are discussed later...
GSM BASED PREPAID ENERGY METER BILLING VIA SMSSRINIVAS REDDY
The project is designed for reading electrical energy consumed in units and in rupees to display on an LCD screen to the user. This data is also provided to the electrical department using GSM technology for billing purposes. Owing to high electricity cost these days it becomes necessary for the consumer to know as to how much electricity is consumed to control electricity bill within his budget by recharging the energy meter units via S.M.S .
Finally when the energy meter coming to zero user can again recharge according to the purpose used. In this proposed system, the consumer will get his energy consumption data on real time basis on a LCD display. The same data is sent through GSM modem to the electricity department via SMS. A microcontroller of 8051 family is interfaced to the energy meter to get the Watt Hour pulses.
Further this project can be enhanced by to control the electrical appliances remotely via SMS. Also, the electricity department can send the monthly bill amount over SMS to the receiving unit for consumer information.
This is a complete automated solution for the existing energy distribution and monitoring system in
India,which can monitor the meter readings continuously and take necessary actions to maintain the power
grid stable. A Power Line Communication (PLC) based modem is integrated with each electronic energy
meter. Through PLC the meters communicate with the coordinator. Coordinator makes use of GPRS modem
to upload/download data to/from internet. A personal computer with an internet connection at the other end,
which contains the database acts as the billing point. Live meter reading sent back to this billing point
periodically and these details are updated in a central database. An interactive, user friendly graphical
interface is present at user end. All the energy logs, notices from the Government, billing details and average
statistics will be available here. The system splits the loads into critical loads and non critical loads. This
makes the distribution system more intelligent. More over prior information about the power cuts can be
done. We can easily implement many add-ons such as energy demand prediction, real time dynamic tariff as
a function of demand and supply and so on.
Hardware prototype of smart home energy management systemeSAT Journals
Abstract The development of ‘demand-side load management’ is the outcome of the smart grid initiative. Due to the significant amount of loads in the residential sector, home energy management has received increasing interest. In the country like India, we are lagging behind, in the power sector as the demand is much more than the supply. Moreover, there is not a single initiative, which has been taken for the deployment of smart suppliers and smart users. Here, I propose a hardware design of smart home energy management system (SHEMS). With the help of this proposed design, it is possible to have a real-time, price-responsive control strategy for domestic loads such as electrical water heater (EWH), illumination (Lights), air conditioning (Fan), dryer etc. Consumers may interact with suppliers or load serving entities (LSEs) to facilitate the load management at the supplier side. This system is designed with sensors to detect human activities and the behavior is predicted by applying a machine learning algorithm in order to help consumers reduce total payment on electricity. Finally, for the verification of the hardware system, simulation and experiment results will be checked based on an actual SHEMS prototype. Keywords: Demand side load management, Load Serving Entity (LSE), Smart Home Energy Management System (SHEMS), Smart Grid.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Is a seminar based on the concept of replacing the existing electricity metering system using in developing countries by a low cost energy meter working without human intervention. Its main components are discussed later...
GSM BASED PREPAID ENERGY METER BILLING VIA SMSSRINIVAS REDDY
The project is designed for reading electrical energy consumed in units and in rupees to display on an LCD screen to the user. This data is also provided to the electrical department using GSM technology for billing purposes. Owing to high electricity cost these days it becomes necessary for the consumer to know as to how much electricity is consumed to control electricity bill within his budget by recharging the energy meter units via S.M.S .
Finally when the energy meter coming to zero user can again recharge according to the purpose used. In this proposed system, the consumer will get his energy consumption data on real time basis on a LCD display. The same data is sent through GSM modem to the electricity department via SMS. A microcontroller of 8051 family is interfaced to the energy meter to get the Watt Hour pulses.
Further this project can be enhanced by to control the electrical appliances remotely via SMS. Also, the electricity department can send the monthly bill amount over SMS to the receiving unit for consumer information.
This is a complete automated solution for the existing energy distribution and monitoring system in
India,which can monitor the meter readings continuously and take necessary actions to maintain the power
grid stable. A Power Line Communication (PLC) based modem is integrated with each electronic energy
meter. Through PLC the meters communicate with the coordinator. Coordinator makes use of GPRS modem
to upload/download data to/from internet. A personal computer with an internet connection at the other end,
which contains the database acts as the billing point. Live meter reading sent back to this billing point
periodically and these details are updated in a central database. An interactive, user friendly graphical
interface is present at user end. All the energy logs, notices from the Government, billing details and average
statistics will be available here. The system splits the loads into critical loads and non critical loads. This
makes the distribution system more intelligent. More over prior information about the power cuts can be
done. We can easily implement many add-ons such as energy demand prediction, real time dynamic tariff as
a function of demand and supply and so on.
This is a complete automated solution for the existing energy distribution and monitoring system in
India,which can monitor the meter readings continuously and take necessary actions to maintain the power
grid stable. A Power Line Communication (PLC) based modem is integrated with each electronic energy
meter. Through PLC the meters communicate with the coordinator. Coordinator makes use of GPRS modem
to upload/download data to/from internet. A personal computer with an internet connection at the other end,
which contains the database acts as the billing point. Live meter reading sent back to this billing point
periodically and these details are updated in a central database. An interactive, user friendly graphical
interface is present at user end. All the energy logs, notices from the Government, billing details and average
statistics will be available here. The system splits the loads into critical loads and non critical loads. This
makes the distribution system more intelligent. More over prior information about the power cuts can be
done. We can easily implement many add-ons such as energy demand prediction, real time dynamic tariff as
a function of demand and supply and so on.
This is a complete automated solution for the existing energy distribution and monitoring system in
India,which can monitor the meter readings continuously and take necessary actions to maintain the power
grid stable. A Power Line Communication (PLC) based modem is integrated with each electronic energy
meter. Through PLC the meters communicate with the coordinator. Coordinator makes use of GPRS modem
to upload/download data to/from internet. A personal computer with an internet connection at the other end,
which contains the database acts as the billing point. Live meter reading sent back to this billing point
periodically and these details are updated in a central database. An interactive, user friendly graphical
interface is present at user end. All the energy logs, notices from the Government, billing details and average
statistics will be available here. The system splits the loads into critical loads and non critical loads. This
makes the distribution system more intelligent. More over prior information about the power cuts can be
done. We can easily implement many add-ons such as energy demand prediction, real time dynamic tariff as
a function of demand and supply and so on.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.