Introduction to networks CCNAv7 Module-1
•
0 likes•3,980 views
This covers the basic topics related to Computer Networks. This is a part of CCNAv7- Introduction to Networks Course.
Report
Share
Report
Share
Download to read offline
Recommended
Basic Switch and End Device configuration CCNA7 Module 2
This PPT covers the concepts related to Cisco IOS, CLI commands, Switch Configuration, Navigation
CCNAv5 - S1: Chapter 3 - Network protocols and communications
CCNAv5
S1: Introduction to network
Chapter3 - Network protocols and communications
Download here:
ccna5vn.wordpress.com
ccna5vn.blogspot.com
Cehv8:
cehv8vn.blogspot.com
Youtube Channel:
www.youtube.com/user/VuzBlog
CCNA v6.0 ITN - Chapter 01
The document provides an overview of chapter 1 from the CCNA Routing and Switching Introduction to Networks course. It discusses how networks are used in everyday life and how they have changed the way people interact, learn, work and play. It also describes the basic components of networks, including end devices, intermediary devices, network media, and topologies. Additionally, it differentiates between local area networks (LANs), which span a small geographic area, and wide area networks (WANs), which interconnect LANs over a wider geographical area.
Introduction to TCP/IP
TCP/IP is a set of protocols that defines how data is transmitted and formatted so that networked systems can communicate. It originated from ARPAnet, which was developed by the Department of Defense to create a decentralized network resilient to attacks. TCP/IP provides logical addressing, routing between networks, name resolution from names to addresses, error checking and flow control for reliable data transmission, and support for multiple applications simultaneously through the use of ports. It is overseen by various standards organizations to ensure interoperability.
Internet protocol (ip)
There are several types of IP addresses including public, private, static, and dynamic addresses. Public IP addresses are associated with an entire network while private IP addresses uniquely identify devices within a home network. Static IP addresses never change while dynamic IP addresses are temporary and change each time a device connects.
IP addresses are also classified based on version (IPv4 or IPv6), address space (A, B, C, D, E classes), and function (unicast, multicast, broadcast, anycast). Key differences between classes include the number of bits used for network vs. host identification and the total number of possible networks. Specific rules govern how network and host IDs are assigned to ensure unique identification of devices.
Basics of IP Addressing
This document provides an introduction to IP addressing, including:
- A brief history of IP development and the OSI and TCP/IP models.
- An overview of IP address classes (A, B, C, D, E), how they are determined, and their characteristics like address ranges and network/host portions.
- Explanations of limitations of classful addressing, subnetting, and how classless or CIDR addressing helps address those limitations by allowing flexible prefix lengths.
- An example is given of how CIDR allows efficient allocation of addresses to networks of different sizes.
CCNA 1 Routing and Switching v5.0 Chapter 4
This document discusses network access and connectivity at the physical and data link layers. It covers various physical media including copper, fiber optic and wireless technologies. Frame structure and data link layer protocols are explained. Media access control methods for local area and wide area networks are also summarized. The objectives are to understand device connectivity options, physical and data link layer standards and protocols, and selecting the appropriate physical media.
CCNA Course Training Presentation
CCNA is associate level career certification. It is an International certification course. Which is helpful to improve your career path in networking field. It gives lot of opportunity for Engineers and lots of opportunity having lots of job.
But now in these days,
This International course is offered by SMS Institute of Technology, Lucknow
So ,
There is no need to go anywhere for the training on CCNA Course Certification during summer Training.
I want to give this information because lots of people think about this course. But they have no any other way like - going to the training institute that offers CCNA Training But they give the certification on Own training Institute That is invalid Because CCNA is a International course Certification and these certificate are come on the email Id.
But Now this course Certification offers by SMS Institute of Technology But the certificate are valid through out the world.
Learn more at blog : --
https://solutionbyexpert.blogspot.com/2020/08/become-expert-secret-of-success-ii.html
#coding
#coding development skill program
#java
Recommended
Basic Switch and End Device configuration CCNA7 Module 2
This PPT covers the concepts related to Cisco IOS, CLI commands, Switch Configuration, Navigation
CCNAv5 - S1: Chapter 3 - Network protocols and communications
CCNAv5
S1: Introduction to network
Chapter3 - Network protocols and communications
Download here:
ccna5vn.wordpress.com
ccna5vn.blogspot.com
Cehv8:
cehv8vn.blogspot.com
Youtube Channel:
www.youtube.com/user/VuzBlog
CCNA v6.0 ITN - Chapter 01
The document provides an overview of chapter 1 from the CCNA Routing and Switching Introduction to Networks course. It discusses how networks are used in everyday life and how they have changed the way people interact, learn, work and play. It also describes the basic components of networks, including end devices, intermediary devices, network media, and topologies. Additionally, it differentiates between local area networks (LANs), which span a small geographic area, and wide area networks (WANs), which interconnect LANs over a wider geographical area.
Introduction to TCP/IP
TCP/IP is a set of protocols that defines how data is transmitted and formatted so that networked systems can communicate. It originated from ARPAnet, which was developed by the Department of Defense to create a decentralized network resilient to attacks. TCP/IP provides logical addressing, routing between networks, name resolution from names to addresses, error checking and flow control for reliable data transmission, and support for multiple applications simultaneously through the use of ports. It is overseen by various standards organizations to ensure interoperability.
Internet protocol (ip)
There are several types of IP addresses including public, private, static, and dynamic addresses. Public IP addresses are associated with an entire network while private IP addresses uniquely identify devices within a home network. Static IP addresses never change while dynamic IP addresses are temporary and change each time a device connects.
IP addresses are also classified based on version (IPv4 or IPv6), address space (A, B, C, D, E classes), and function (unicast, multicast, broadcast, anycast). Key differences between classes include the number of bits used for network vs. host identification and the total number of possible networks. Specific rules govern how network and host IDs are assigned to ensure unique identification of devices.
Basics of IP Addressing
This document provides an introduction to IP addressing, including:
- A brief history of IP development and the OSI and TCP/IP models.
- An overview of IP address classes (A, B, C, D, E), how they are determined, and their characteristics like address ranges and network/host portions.
- Explanations of limitations of classful addressing, subnetting, and how classless or CIDR addressing helps address those limitations by allowing flexible prefix lengths.
- An example is given of how CIDR allows efficient allocation of addresses to networks of different sizes.
CCNA 1 Routing and Switching v5.0 Chapter 4
This document discusses network access and connectivity at the physical and data link layers. It covers various physical media including copper, fiber optic and wireless technologies. Frame structure and data link layer protocols are explained. Media access control methods for local area and wide area networks are also summarized. The objectives are to understand device connectivity options, physical and data link layer standards and protocols, and selecting the appropriate physical media.
CCNA Course Training Presentation
CCNA is associate level career certification. It is an International certification course. Which is helpful to improve your career path in networking field. It gives lot of opportunity for Engineers and lots of opportunity having lots of job.
But now in these days,
This International course is offered by SMS Institute of Technology, Lucknow
So ,
There is no need to go anywhere for the training on CCNA Course Certification during summer Training.
I want to give this information because lots of people think about this course. But they have no any other way like - going to the training institute that offers CCNA Training But they give the certification on Own training Institute That is invalid Because CCNA is a International course Certification and these certificate are come on the email Id.
But Now this course Certification offers by SMS Institute of Technology But the certificate are valid through out the world.
Learn more at blog : --
https://solutionbyexpert.blogspot.com/2020/08/become-expert-secret-of-success-ii.html
#coding
#coding development skill program
#java
200 301-ccna
The CCNA Exam v1.0 (200-301) is a 120-minute exam that tests a candidate's knowledge of network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability. The exam covers topics like network components, IP addressing, routing protocols, network security concepts, and controller-based networking architectures. The Implementing and Administering Cisco Solutions (CCNA) course helps candidates prepare for this exam.
Spanning tree protocol (stp)
Spanning Tree Protocol (STP) is a network protocol designed to prevent layer 2 loops. It is standardized as IEEE 802.D protocol. STP blocks some ports on switches with redundant links to prevent broadcast storms and ensure loop-free topology. With STP in place, you can have redundant links between switches in order to provide redundancy.
Chapter 10 - DHCP
Chapter 10: Objectives
------------------------------------------------------
Describe the operation of DHCPv4 in a small-to-medium-sized business network.
Configure a router as a DHCPv4 server.
Configure a router as a DHCPv4 client.
Troubleshoot a DHCP configuration for IPv4 in a switched network.
Explain the operation of DHCPv6.
Configure a stateless DHCPv6 for a small-to-medium-sized business.
Configure a stateful DHCPv6 for a small-to-medium-sized business.
Troubleshoot a DHCP configuration for IPv6 in a switched network.
Yaser Rahmati | یاسر رحمتی
Rahmati Academy | آکادمی رحمتی
www.yaser-rahmati.ir
www.rahmati-academy.ir
CCNA v6.0 ITN - Chapter 10
The document discusses the application layer of the OSI model and common application layer protocols. It covers how protocols like HTTP, SMTP, POP, IMAP, FTP operate to provide services to end users. DNS and DHCP are also examined, with DNS translating names to IP addresses and DHCP automating IP address assignment. The application, presentation and session layers are described as working together to support applications and exchange data between hosts.
CCNA 1 Routing and Switching v5.0 Chapter 3
The document discusses network protocols and communications. It explains that for communication between devices to occur, agreed upon rules and protocols must be followed. Key points covered include common network protocols like TCP/IP, the role of standards organizations in establishing protocols, and how data is encapsulated and moves through the layers of the OSI and TCP/IP models when transmitted over a network. The chapter also addresses how devices on a local area network access both local and remote network resources through the use of addressing schemes and default gateways.
IP Configuration
An IP address is a numerical label assigned to devices in a network using the Internet Protocol for communication. It is composed of four numbers separated by periods, with each number representing eight bits for a total of 32 bits. A subnet mask defines which parts of the IP address represent the network ID and which represent the host ID. A default gateway, usually a router, delivers packets when a computer does not know the destination network.
CCNA v6.0 ITN - Chapter 11
The document discusses planning and designing a small network, including:
- Identifying common devices used such as routers, switches, wireless access points, and IP phones.
- Design considerations for a small network like IP addressing, redundancy, traffic prioritization.
- Common network applications and protocols used, including VoIP, DHCP, DNS.
- Ensuring the network can support real-time applications like voice and video.
- Planning for future growth of the network through documentation, traffic analysis, and protocol analysis.
Ethernet
IEEE 802.3 defines Ethernet standards for local area networks (LANs) and metropolitan area networks (MANs). It was introduced in 1980 and standardized in 1982. Ethernet supports higher bitrates and longer link distances. It works using CSMA/CD and sends data in MAC data frames, which contain source and destination addresses, data, and error detection information. Common Ethernet types include standard Ethernet at 10 Mbps on coaxial cable or twisted pair, Fast Ethernet at 100 Mbps, and Gigabit Ethernet at 1000 Mbps on fiber or twisted pair.
CCNA Product Overview.pptx
The document provides an overview of the CCNA 7.0 curriculum from Cisco. Some key points:
- CCNA 7.0 has been enhanced with a modular course design to improve learning effectiveness and skills progression.
- The curriculum is delivered over three courses (Introduction to Networks, Switching/Routing Essentials, and Enterprise Networking) to provide hands-on experience and career skills for associate-level networking roles.
- CCNA 7.0 helps prepare students for the new consolidated CCNA certification exam by building skills in networking, security, automation, and other foundational areas.
VLAN Trunking Protocol
VLAN Trunking Protocol (VTP) is a Cisco proprietary protocol that propagates the definition of Virtual
Local Area Networks (VLAN) on the whole local area network.[1] To do this, VTP carries VLAN
information to all the switches in a VTP domain. VTP advertisements can be sent over ISL, 802.1Q, IEEE
802.10 and LANE trunks. VTP is available on most of the Cisco Catalyst Family products.
Ccnp presentation [Day 1-3] Class
This document summarizes a presentation about Cisco's CCNP Enterprise ENCOR and ENARSI certification program. It provides information about the trainer, an overview of the CCNP certification requirements and exams, discussion of exam topics, and a question and answer section. The presentation aims to help attendees learn about the CCNP Enterprise certification track and prepare for the ENCOR and ENARSI exams.
Internetworking fundamentals(networking)
This document provides an introduction to networking concepts including:
- Binary and hexadecimal number systems and how they relate to IP addressing.
- Network layers including the OSI and TCP/IP models.
- Common network devices, media, and protocols used to connect local and wide area networks.
- Key functions of each layer in the OSI model including physical, data link, network, transport, and application layers.
- How data is encapsulated as it moves up the OSI model layers and de-encapsulated as it moves down.
Ethernet technology
The document discusses the history and technical details of Ethernet networking. It describes how the original Ethernet standard was established in 1980 and details the physical media and frame sizes used. It also explains how Ethernet addresses devices using unique 48-bit MAC addresses for unicast, multicast using addresses starting with 01-00-5E, and broadcast using all ones. The document also briefly mentions CSMA/CD and how Ethernet has expanded beyond local area networks up to 1 Gbps.
Static Routing
The document discusses static routing and key concepts related to router configuration and operation. It defines static routes as manually configured paths that specify how a router will transmit packets to certain networks. The summary describes how to configure static routes, default routes, and route summarization. It also outlines tools for troubleshooting routing issues like missing routes.
IP Address
This document provides information about IP addresses and Internet Protocol versions 4 and 6. It defines an IP address as a unique identifier for devices on a TCP/IP network. IPv4 uses 32-bit addresses, while IPv6 uses 128-bit addresses to allow for many more available addresses. The document also describes how IP addresses are structured and assigned, either statically or dynamically through DHCP. It notes that IPv6 deployment is increasing to address IPv4 address exhaustion issues.
CCNA 1 Routing and Switching v5.0 Chapter 1
This document summarizes key points from Chapter 1 of a Cisco networking textbook. It introduces networking concepts like LANs, WANs and the Internet. It discusses how networks are used in daily life for communication, work and entertainment. It also outlines trends that will impact networks, such as BYOD, online collaboration, video and cloud computing. The chapter objectives are to explain network topologies, devices and characteristics used in small to medium businesses.
Networking Basics
This document provides an introduction to computer networks. It discusses the basics of LANs, MANs and WANs. It describes common network topologies like bus, star, ring and mesh. It also discusses the various components that make up a network including physical media, networking devices, computers, networking software and applications. The document is intended to provide a high-level overview of computer networks.
CCNA v6.0 ITN - Chapter 05
This document provides an overview of chapter 5 topics in the CCNA Routing and Switching curriculum, including Ethernet protocols, LAN switches, and the Address Resolution Protocol (ARP). Section 5.1 explains Ethernet encapsulation and frame formats. Section 5.2 describes how switches build MAC address tables to forward frames and the different forwarding methods switches can use. Section 5.3 explains how ARP maps IP addresses to MAC addresses to allow communication on a network.
CCNA PPT
This document discusses Cisco Certified Network Associate (CCNA) certification and networking concepts. It includes:
- An overview of the CCNA certification and what skills it demonstrates in networking areas like LANs, WANs, routing protocols, and network access.
- Explanations of common networking devices, topologies, protocols like IP addressing and routing, and models like the OSI model.
- Descriptions of static and dynamic routing, protocols like RIP, OSPF, EIGRP, and commands used to configure routers.
Ccna PPT
A
PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
CCNA-2 SRWE Mod-10 LAN Security Concepts
This ppt discusses the concepts related to LAN attacks including MAC table attacks, MAC & IP address spoofing, ARP spoofing attacks etc.
CCNA-2 SRWE Mod-11 Switch Security Configuration
This ppt discusses about Switch Security Configuration including Port Security configuration, Mitigating DHCP attacks, APR attacks, STP attacks and usage of DHCP Snooping and Portfast & BPDUGuard.
More Related Content
What's hot
200 301-ccna
The CCNA Exam v1.0 (200-301) is a 120-minute exam that tests a candidate's knowledge of network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability. The exam covers topics like network components, IP addressing, routing protocols, network security concepts, and controller-based networking architectures. The Implementing and Administering Cisco Solutions (CCNA) course helps candidates prepare for this exam.
Spanning tree protocol (stp)
Spanning Tree Protocol (STP) is a network protocol designed to prevent layer 2 loops. It is standardized as IEEE 802.D protocol. STP blocks some ports on switches with redundant links to prevent broadcast storms and ensure loop-free topology. With STP in place, you can have redundant links between switches in order to provide redundancy.
Chapter 10 - DHCP
Chapter 10: Objectives
------------------------------------------------------
Describe the operation of DHCPv4 in a small-to-medium-sized business network.
Configure a router as a DHCPv4 server.
Configure a router as a DHCPv4 client.
Troubleshoot a DHCP configuration for IPv4 in a switched network.
Explain the operation of DHCPv6.
Configure a stateless DHCPv6 for a small-to-medium-sized business.
Configure a stateful DHCPv6 for a small-to-medium-sized business.
Troubleshoot a DHCP configuration for IPv6 in a switched network.
Yaser Rahmati | یاسر رحمتی
Rahmati Academy | آکادمی رحمتی
www.yaser-rahmati.ir
www.rahmati-academy.ir
CCNA v6.0 ITN - Chapter 10
The document discusses the application layer of the OSI model and common application layer protocols. It covers how protocols like HTTP, SMTP, POP, IMAP, FTP operate to provide services to end users. DNS and DHCP are also examined, with DNS translating names to IP addresses and DHCP automating IP address assignment. The application, presentation and session layers are described as working together to support applications and exchange data between hosts.
CCNA 1 Routing and Switching v5.0 Chapter 3
The document discusses network protocols and communications. It explains that for communication between devices to occur, agreed upon rules and protocols must be followed. Key points covered include common network protocols like TCP/IP, the role of standards organizations in establishing protocols, and how data is encapsulated and moves through the layers of the OSI and TCP/IP models when transmitted over a network. The chapter also addresses how devices on a local area network access both local and remote network resources through the use of addressing schemes and default gateways.
IP Configuration
An IP address is a numerical label assigned to devices in a network using the Internet Protocol for communication. It is composed of four numbers separated by periods, with each number representing eight bits for a total of 32 bits. A subnet mask defines which parts of the IP address represent the network ID and which represent the host ID. A default gateway, usually a router, delivers packets when a computer does not know the destination network.
CCNA v6.0 ITN - Chapter 11
The document discusses planning and designing a small network, including:
- Identifying common devices used such as routers, switches, wireless access points, and IP phones.
- Design considerations for a small network like IP addressing, redundancy, traffic prioritization.
- Common network applications and protocols used, including VoIP, DHCP, DNS.
- Ensuring the network can support real-time applications like voice and video.
- Planning for future growth of the network through documentation, traffic analysis, and protocol analysis.
Ethernet
IEEE 802.3 defines Ethernet standards for local area networks (LANs) and metropolitan area networks (MANs). It was introduced in 1980 and standardized in 1982. Ethernet supports higher bitrates and longer link distances. It works using CSMA/CD and sends data in MAC data frames, which contain source and destination addresses, data, and error detection information. Common Ethernet types include standard Ethernet at 10 Mbps on coaxial cable or twisted pair, Fast Ethernet at 100 Mbps, and Gigabit Ethernet at 1000 Mbps on fiber or twisted pair.
CCNA Product Overview.pptx
The document provides an overview of the CCNA 7.0 curriculum from Cisco. Some key points:
- CCNA 7.0 has been enhanced with a modular course design to improve learning effectiveness and skills progression.
- The curriculum is delivered over three courses (Introduction to Networks, Switching/Routing Essentials, and Enterprise Networking) to provide hands-on experience and career skills for associate-level networking roles.
- CCNA 7.0 helps prepare students for the new consolidated CCNA certification exam by building skills in networking, security, automation, and other foundational areas.
VLAN Trunking Protocol
VLAN Trunking Protocol (VTP) is a Cisco proprietary protocol that propagates the definition of Virtual
Local Area Networks (VLAN) on the whole local area network.[1] To do this, VTP carries VLAN
information to all the switches in a VTP domain. VTP advertisements can be sent over ISL, 802.1Q, IEEE
802.10 and LANE trunks. VTP is available on most of the Cisco Catalyst Family products.
Ccnp presentation [Day 1-3] Class
This document summarizes a presentation about Cisco's CCNP Enterprise ENCOR and ENARSI certification program. It provides information about the trainer, an overview of the CCNP certification requirements and exams, discussion of exam topics, and a question and answer section. The presentation aims to help attendees learn about the CCNP Enterprise certification track and prepare for the ENCOR and ENARSI exams.
Internetworking fundamentals(networking)
This document provides an introduction to networking concepts including:
- Binary and hexadecimal number systems and how they relate to IP addressing.
- Network layers including the OSI and TCP/IP models.
- Common network devices, media, and protocols used to connect local and wide area networks.
- Key functions of each layer in the OSI model including physical, data link, network, transport, and application layers.
- How data is encapsulated as it moves up the OSI model layers and de-encapsulated as it moves down.
Ethernet technology
The document discusses the history and technical details of Ethernet networking. It describes how the original Ethernet standard was established in 1980 and details the physical media and frame sizes used. It also explains how Ethernet addresses devices using unique 48-bit MAC addresses for unicast, multicast using addresses starting with 01-00-5E, and broadcast using all ones. The document also briefly mentions CSMA/CD and how Ethernet has expanded beyond local area networks up to 1 Gbps.
Static Routing
The document discusses static routing and key concepts related to router configuration and operation. It defines static routes as manually configured paths that specify how a router will transmit packets to certain networks. The summary describes how to configure static routes, default routes, and route summarization. It also outlines tools for troubleshooting routing issues like missing routes.
IP Address
This document provides information about IP addresses and Internet Protocol versions 4 and 6. It defines an IP address as a unique identifier for devices on a TCP/IP network. IPv4 uses 32-bit addresses, while IPv6 uses 128-bit addresses to allow for many more available addresses. The document also describes how IP addresses are structured and assigned, either statically or dynamically through DHCP. It notes that IPv6 deployment is increasing to address IPv4 address exhaustion issues.
CCNA 1 Routing and Switching v5.0 Chapter 1
This document summarizes key points from Chapter 1 of a Cisco networking textbook. It introduces networking concepts like LANs, WANs and the Internet. It discusses how networks are used in daily life for communication, work and entertainment. It also outlines trends that will impact networks, such as BYOD, online collaboration, video and cloud computing. The chapter objectives are to explain network topologies, devices and characteristics used in small to medium businesses.
Networking Basics
This document provides an introduction to computer networks. It discusses the basics of LANs, MANs and WANs. It describes common network topologies like bus, star, ring and mesh. It also discusses the various components that make up a network including physical media, networking devices, computers, networking software and applications. The document is intended to provide a high-level overview of computer networks.
CCNA v6.0 ITN - Chapter 05
This document provides an overview of chapter 5 topics in the CCNA Routing and Switching curriculum, including Ethernet protocols, LAN switches, and the Address Resolution Protocol (ARP). Section 5.1 explains Ethernet encapsulation and frame formats. Section 5.2 describes how switches build MAC address tables to forward frames and the different forwarding methods switches can use. Section 5.3 explains how ARP maps IP addresses to MAC addresses to allow communication on a network.
CCNA PPT
This document discusses Cisco Certified Network Associate (CCNA) certification and networking concepts. It includes:
- An overview of the CCNA certification and what skills it demonstrates in networking areas like LANs, WANs, routing protocols, and network access.
- Explanations of common networking devices, topologies, protocols like IP addressing and routing, and models like the OSI model.
- Descriptions of static and dynamic routing, protocols like RIP, OSPF, EIGRP, and commands used to configure routers.
Ccna PPT
A
PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
What's hot (20)
More from Mukesh Chinta
CCNA-2 SRWE Mod-10 LAN Security Concepts
This ppt discusses the concepts related to LAN attacks including MAC table attacks, MAC & IP address spoofing, ARP spoofing attacks etc.
CCNA-2 SRWE Mod-11 Switch Security Configuration
This ppt discusses about Switch Security Configuration including Port Security configuration, Mitigating DHCP attacks, APR attacks, STP attacks and usage of DHCP Snooping and Portfast & BPDUGuard.
CCNA-2 SRWE Mod-12 WLAN Concepts
This ppt describes about Module-12 of SRWE course and covers the concepts related to Introduction to Wireless, Components of WLANs, WLAN Operation, CAPWAP Operation, Channel Management, WLAN Threats and Securing WLANs.
CCNA-2 SRWE Mod-13 WLAN Configuration
This ppt includes contents related to Remote Site WLAN Configuration, Configure a Basic WLAN on the WLC, Configure a WPA2 Enterprise WLAN on the WLC & Troubleshoot WLAN Issues
CCNA-2 SRWE Mod-15 Static IP Routing
This ppt discusses the concepts related to Static IP routing, types of static routes, configuration of IP Static Routes, IP Default Static Routes, Floating Static Routes & Static Host Routes
CCNA-2 SRWE Mod-14 Routing Concepts
This ppt discusses about the process of routing and explains how routers use information in packets to make forwarding decisions.
Protecting the Organization - Cisco: Intro to Cybersecurity Chap-4
The document discusses the results of a study on the impact of climate change on global wheat production. Researchers found that rising temperatures will significantly reduce wheat yields across different regions of the world by the end of the century. Under a high emissions scenario, the study projects a global average decrease in wheat production of 6% by 2050, and a 17% decrease by 2100, threatening global food security.
Protecting Your Data and Privacy- Cisco: Intro to Cybersecurity chap-3
This ppt focuses on your personal devices and your personal data. It includes tips for protecting your devices, creating strong passwords and safely using wireless networks. It also discusses maintaining your data securely.
Attacks, Concepts and Techniques - Cisco: Intro to Cybersecurity Chap-2
The document discusses the results of a study on the effects of a new drug on memory and cognitive function in older adults. The double-blind study involved 100 participants aged 65-80 who were given either the drug or a placebo daily for 6 months. Researchers found that those who received the drug performed significantly better on memory and problem-solving tests at the end of the study compared to those who received the placebo.
The need for Cybersecurity - Cisco Intro to Cybersec Chap-1
This ppt provides an overview of need for cybersecurity, which is the chapter-1 of Introduction to cybersecurity course.
Cisco Cybersecurity Essentials Chapter- 7
This is the Seventh Chapter of Cisco Cyber Security Essentials course which discusses the protection aspects of various cyber security domains
Protocols and Reference models CCNAv7-1
This ppt covers the concepts related to Reference Models, Protocols, Data Encapsulation Process and Data Access
Process scheduling (CPU Scheduling)
It consists of CPU scheduling algorithms, examples, scheduling problems, realtime scheduling algorithms and issues. Multiprocessing and multicore scheduling.
OS - Process Concepts
Gives an overview about Process, PCB, Process States, Process Operations, Scheduling, Schedulers, Interprocess communication, shared memory and message passing systems
Operating systems system structures
Overview about services of OS, System Programs, System Calls, user and operating system interface, categories of system calls and API's
Introduction to Operating Systems
The document discusses operating systems and computer system architecture. It defines an operating system as a program that manages a computer's hardware resources and provides common services for application software. It describes the components of a computer system as the CPU, memory, I/O devices, and how the operating system controls and coordinates their use. It also discusses different types of operating systems designed for single-user systems, multi-user systems, servers, handheld devices, and embedded systems.
Cisco cybersecurity essentials chapter 8
This is the eighth Chapter of Cisco Cyber Security Essentials course Which discusses the safeguarding the cyber security domains and steps to become a cyber security professional.
Cisco cybersecurity essentials chapter - 6
This is the Sixth Chapter of Cisco Cyber Security Essentials course Which discusses the issues related to maintaining the high availability.
Cisco cybersecurity essentials chapter 4
This is the Fourth Chapter of Cisco Cyber Security Essentials course Which discusses the implementation aspects of Confidentiality via Encryption, Access Control Techniques
Cisco cybersecurity essentials chapter -5
This is the Second Chapter of Cisco Cyber Security Essentials course Which discusses the technologies and techniques implemented to provide integrity.
More from Mukesh Chinta (20)
Protecting the Organization - Cisco: Intro to Cybersecurity Chap-4
Protecting the Organization - Cisco: Intro to Cybersecurity Chap-4
Protecting Your Data and Privacy- Cisco: Intro to Cybersecurity chap-3
Protecting Your Data and Privacy- Cisco: Intro to Cybersecurity chap-3
Attacks, Concepts and Techniques - Cisco: Intro to Cybersecurity Chap-2
Attacks, Concepts and Techniques - Cisco: Intro to Cybersecurity Chap-2
The need for Cybersecurity - Cisco Intro to Cybersec Chap-1
The need for Cybersecurity - Cisco Intro to Cybersec Chap-1
Recently uploaded
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Recently uploaded (20)
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District