This webinar gives an overview of many new industrial applications enabled by award-winning DLP ® technology across industrial and factory automation applications. DLP technology is a high-value TI content in a given system and has strong pull-through impact for rest of the electronics – analog and embedded processors.
DLP fundamentally is an advanced MEMS devices providing spatial light modulation and enables many new exciting applications. 3D scanning, 3D machine vision, robotic vision, and other optical sensors are some of the popular use cases in industrial and factory automation. The structured light technique for 3D sensing uses highly differentiated DLP technology that allows projection of custom and adaptable patterns onto the target object to capture physical measurements, analyze location, or inspect a surface. DLP based spectroscopy is an innovative solution for characterizing and recognizing different materials used in several industries such as Food, Agriculture, Plastics, Petrchemicals, Pharmaceuticals and Medical applications.
This webinar also covers comprehensive TIDesigns that include complete hardware and software enable customers use complete TI technology – DLP chipsets complemented by extensive analog (power, led drivers, signal chain and others) and embedded processors.
Watch this webinar to learn:
·How to sell TI solutions in Industrial and factory automation
· Machine vision solutions used in industrial automation and robotic vision
·DLP based spectroscopy Food, Agriculture, Plastics, Petrochemicals, Pharmaceuticals and Medical applications
Digital Light Processing and it's Future applicationsPramitha Preman
This ppt describes briefly about DLP, its evolution and working. It also includes the Pros & Cons of this technology.
You can also find an youtube video regarding the working of digital light processing.
link: https://www.youtube.com/watch?v=9nb8mM3uEIc
Digital Light Processing and it's Future applicationsPramitha Preman
This ppt describes briefly about DLP, its evolution and working. It also includes the Pros & Cons of this technology.
You can also find an youtube video regarding the working of digital light processing.
link: https://www.youtube.com/watch?v=9nb8mM3uEIc
Presentation describing how full immersion is achieved by simultaneously focusing on the broader dimensions of visual quality, sound quality, and intuitive interactions. The optimal way to enhance these broader dimensions requires an end-to-end approach, heterogeneous computing, and utilizing cognitive technologies.
Check out the immersive experiences website for the latest information: https://www.qualcomm.com/invention/cognitive-technologies/immersive-experiences
Download the presentation at: https://www.qualcomm.com/documents/immersive-experiences-presentation
Full immersion is achieved by simultaneously focusing on the broader dimensions of visual quality, sound quality, and intuitive interactions. This presentation discusses how:
- Technology improvements continue to drive more immersive experiences, especially for VR and AR
- High Dynamic Range (HDR) will enhance the visual quality on all our screens
- Scene-based audio is a new paradigm for 3D audio
- Natural user interfaces like voice, gestures, and eye tracking are making interactions more intuitive
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Join Red Pill Development's Creative Director Bob Kadrie, and Software Engineer Keith Strickland as they discuss how good design profoundly impacts the effectiveness of the applications you develop. In this session we will explore the industry's renewed dedication to user experience by taking a closer look at the design standards created by Google, IBM and Microsoft, and how you can utilize these design strategies to improve your application's usability and adoption.
It's all about time: towards the real time evaluation of collaborative activi...Irene-Angelica Chounta
In this paper, we propose a method for the real time evaluation of collaborative activities. The method aims to classify collaborative activities using a memory-based learning model and to evaluate them using a reference set of pre-evaluated activities. The proposed approach uses time series to represent activities and classifies them regarding their similarity. In order to evaluate the results, the method is used as an automatic rater of collaboration quality and the ratings are compared to ratings of human experts.
Presentation describing how full immersion is achieved by simultaneously focusing on the broader dimensions of visual quality, sound quality, and intuitive interactions. The optimal way to enhance these broader dimensions requires an end-to-end approach, heterogeneous computing, and utilizing cognitive technologies.
Check out the immersive experiences website for the latest information: https://www.qualcomm.com/invention/cognitive-technologies/immersive-experiences
Download the presentation at: https://www.qualcomm.com/documents/immersive-experiences-presentation
Full immersion is achieved by simultaneously focusing on the broader dimensions of visual quality, sound quality, and intuitive interactions. This presentation discusses how:
- Technology improvements continue to drive more immersive experiences, especially for VR and AR
- High Dynamic Range (HDR) will enhance the visual quality on all our screens
- Scene-based audio is a new paradigm for 3D audio
- Natural user interfaces like voice, gestures, and eye tracking are making interactions more intuitive
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Join Red Pill Development's Creative Director Bob Kadrie, and Software Engineer Keith Strickland as they discuss how good design profoundly impacts the effectiveness of the applications you develop. In this session we will explore the industry's renewed dedication to user experience by taking a closer look at the design standards created by Google, IBM and Microsoft, and how you can utilize these design strategies to improve your application's usability and adoption.
It's all about time: towards the real time evaluation of collaborative activi...Irene-Angelica Chounta
In this paper, we propose a method for the real time evaluation of collaborative activities. The method aims to classify collaborative activities using a memory-based learning model and to evaluate them using a reference set of pre-evaluated activities. The proposed approach uses time series to represent activities and classifies them regarding their similarity. In order to evaluate the results, the method is used as an automatic rater of collaboration quality and the ratings are compared to ratings of human experts.
Post-CMOS and Post-MEMS compatible flexible skin technologiesKaranvir Singh
This ppt reviews flexible skin technologies that
enable monolithic integration of silicon CMOS circuits and high temperature MEMS devices on flexible substrates. The monolithic integration is achieved by fabricating CMOS circuits or MEMS sensors on silicon wafers first and then forming flexible skins by post-processing. In this sense, these flexible skin technologies are termed as post-CMOS and -MEMS compatible. Most flexible devices developed using these technologies share a common structure—silicon islands connected by flexible cables.
Global Spectrometry Market: Trends & Opportunities (2013-2018) – Daedal ResearchDaedal Research
The report titled “Global Spectrometry Market: Trends and Opportunities (2013-2018)” analyzes the potential opportunities and significant trends in the global Spectrometry market. For more mail me: info@daedal-research.com
Emerging MEMSPatent Investigation 2014 Report by Yole DeveloppementYole Developpement
Who owns key patents for high-growth emerging MEMS innovations?
The report provides essential patent data, technology analysis and market forecasts for 7 selected Emerging MEMS (eMEMS) technologies that we believe will soon reach the marketplace: autofocus, AOC MEMS, chemical sensors, micro-speakers, scanning micro-mirrors, Si microfluidic and ultrasonic MEMS. The market for emerging MEMS covered in this report is expected to grow from US$171M in 2013 to US$2.8B in 2019, corresponding to a 58.2% CAGR.
UNDERSTAND WHICH COMPANIES OWN THE KEY PATENTS FOR THE FUTURE OF EMERGING MEMS
Patent activity related to eMEMS began in the 1990s and we observe a takeoff of patent publications for AutoFocus (AF), scanning micro-mirrors and ultrasonic MEMS technologies since the mid-2000s.
MEMS AF patent activity is new, but has increased since its emergence in 2009. This period also corresponds to the growth of the CMOS image sensor market for consumer applications, requiring more compact camera modules with more functionalities. Cambridge Mechatronics and DigitalOptics are currently the leading patent holders, but Korean giant LG has become a major force since 2010. Today MEMS AF is still a hot topic especially for cell phones and tablets, but wasn’t adopted in 2013. Although MEMS AF has promising market potential, it still faces strong market and technical challenges, which might explain the increasing patent activity of recent years.
More information on that report at http://www.i-micronews.com/mems-sensors-report/product/emerging-mems-patent-investigation-2014.html
Still, budgeting and planning processes are among the most hair-pulling exercises marketing teams go through each year. That’s why National Instruments turned to SiriusDecisions’ Campaign framework to bring sanity back to this annual activity.
For this 400-member global marketing team, selecting an industry accepted framework, leveraging technology, and doubling down on collaboration led to huge strides in their planning and budgeting process.
To watch this webinar on demand visit: http://resources.allocadia.com/revamping-marketing-planning-national-instruments-webinar.html
Excerpt of Market Intelligence Report Robot Vision 2012AMC Hofmann
For the first time ever a comprehensive Market Intelligence Report on Robot
Vision is made available for you.
Robot Vision, the optical technology to precisely determine a part´s position
and thus guide robots and other equipment, is the key to successful
automation in almost all industries and applications, industrial and nonindustrial.
The MIR “Robot Vision 2011” provides an in-depth insight into industries and
markets where Robot Vision and optical positioning is in use already or will be
used in the future.
Multispectral imaging in Plant Sciences with VideometerLab 3Adrian Waltho
Multispectral imaging provides valuable information on the quality and safety of a vast array of materials from pharmaceuticals to raw meat and burned biscuits. The same techniques can be used to measure skin sensitivity to sticking plaster, detect counterfeit drugs and packaging and gain insight into historical artefacts such as medieval manuscripts and weapons.
The VideometerLab 3 takes 19 images at 19 specific wavelengths in ultraviolet, visible and infrared light. With multivariate statistical analysis we can reveal hidden patterns in our 19-dimension colour space and find information that would be otherwise 'invisible' to our human eyes.
We at KS Designers constitutes the professional designers and writes to worked out with the most innovative and creative ideas to formulate the concept of the perfect magazine. That meets your all necessities. Our professionals are trained to handle adverse situations and deliver under pressure in short time frames.
Rate and Performance Analysis of Indoor Optical Camera Communications in Opti...Willy Anugrah Cahyadi
It is a summary of my dissertation for the Ph.D. degree. The main topic is optical camera communication (OCC), which was being standardized under the revision to IEEE 802.15.7-2011 standard in 2018.
As the inventors of the first high-performance, computer-controlled LED spectroradiometers, Gamma Scientific has continued to set the standard in spectroradiometer accuracy and reliability.
RadOMA spectroradiometers are trusted by the world’s leading organizations to provide accurate measurements.
RadOMA spectroradiometers feature a proprietary optical design and back thinned CCD technology that provides exceptional low-light measurements, superior blue light sensitivity and highly accurate measurements of wavelength, color and power.
The slideshare gives an overview of the different and recent advancements in the fields of digital imaging and throws a light on the clinical applications.
Tektronix keithley Product and Application update Q2 2016Jeff Sable
Tektronix delivers innovative, precise and easy-to-operate test, measurement and monitoring solutions that solve problems, unlock insights and drive discovery.
Explore how SWIR cameras, particularly NIT HiPe SenS, bring benefits for low light and long exposure time applications (Microscopy, Biomedical, Semiconductor Inspection, etc. )
For more information about NIT, please visit: https://new-imaging-technologies.com/ or contact us at info@new-imaging-technologies.com
Multispectral imaging in Forensics with VideometerLab 3Adrian Waltho
Multispectral imaging provides valuable information on the quality and safety of a vast array of materials from pharmaceuticals to raw meat and burned biscuits. The same techniques can be used to measure skin sensitivity to sticking plaster, detect counterfeit drugs and packaging and gain insight into historical artefacts such as medieval manuscripts and weapons.
The VideometerLab 3 takes 19 images at 19 specific wavelengths in ultraviolet, visible and infrared light. With multivariate statistical analysis we can reveal hidden patterns in our 19-dimension colour space and find information that would be otherwise 'invisible' to our human eyes.
Virtual Retinal Display: their falling cost and rising performanceJeffrey Funk
These slides use concepts from my (Jeff Funk) course entitled analyzing hi-tech opportunities to analyze the increasing economic feasibility of virtual retinal displays. These displays focus light on a person’s retina using LEDs, digital micro-mirrors and lenses, which are all encased in a head-set about the size of glasses. They enable high resolution 3D video images with a large field of view that are far superior to existing displays. Rapid improvements in LEDs and digital micro-mirrors (one type of MEMS) are enabling these displays to experience rapid reductions in cost and improvements in performance.
Enabling Mobile Spectroscopy: New Light Source Technologies for Analytical In...InsideScientific
Learn about LED based products for analytical spectroscopy applications, advantages over conventional light sources and the easy integration into mobile equipment.
Learning Objectives Include:
- Innovative technical solution - performance of the first broadband UV LED light source FiberLight® L3
- Enabling mobile spectroscopy - advantages of broadband UV LED FiberLight® L3 over conventional light sources, overcoming the limitations of current solutions
Similar to Innovate in new and exciting optical sensing applications in industrial markets with DLP® technology (20)
Best practices for optimizing performance and reducing costs when selecting a...Design World
Cable carriers are a practical and innovative way to guide and protect cables and hoses in dynamic applications. Whether you require a simple, off-the-shelf system, or have an application requiring a more sophisticated and complex solution, there are steps that can be taken in the design phase that can significantly improve performance, reduce costs and simplify installation.
Watch the webinar: http://www.designworldonline.com/best-practices-using-cable-hose-carriers/#_
Five Steps to Optimize Casting and Eliminate DefectsDesign World
Traditionally, engineers had a hard time predicting defects with their cast designs. With simulation, engineers can now predict defects from porosity and cold shots to air pockets.
Watch the webinar: http://www.designworldonline.com/optimize-casting-and-eliminate-defects/#_
Meeting the Motion Needs of Flexible AutomationDesign World
Join us for a free on demand webinar with Parker Hannifin Electromechanical & Drives Division.
With more demand for customized equipment, there is growing interest in flexible automation solutions. These are configurable and scalable and account for variances in payload and speed, among other parameters.
In this webinar you’ll learn how configurable and scalable mechanics make flexible automation for machine builders a reality. Specifically, the webinar examines a range of linear motion components with a focus on the benefits of electric actuators including greater energy efficiency, flexibility and control.
Watch the webinar: http://www.designworldonline.com/webinar-meeting-motion-needs-flexible-automation/
Proper coupling selection: what you’re probably missingDesign World
Selecting the couplings for your motion system doesn’t exactly stretch the limits of your engineering degree. Which is exactly why we don’t dig deeper to see if we’re making the best choice. In this webinar, three coupling industry experts help you avoid making the mistakes involved with commonly overlooked details. Here, you’ll learn how to separate a good choice, from the perfect one.
Watch the webinar: http://www.designworldonline.com/proper-coupling-selection-youre-probably-missing/
Curved Motion System Design for Machinery and AutomationDesign World
Guided precision motion is most often thought of in the linear form which is used extensively in machinery and automation applications. Sometimes curved motion is better suited to an application. Examples might include moving a sensor or welding torch around the circumference of a pipe, or a complete 360-degree rotary table for indexing a complex assembly operation to variousangles.
Watch the webinar: http://www.designworldonline.com/curved-motion-system-design-for-machinery-and-automation/
See How the SOLIDWORKS Ecosystem Delivers on Design InnovationDesign World
Today Product Designers and Engineers are under pressure to speed up development and introduce ever increasing product complexity at a greater pace than ever before. Using the right tools to design these products is paramount.
This webinar will explain how the SOLIDWORKS Ecosystem is here to meet the challenges of delivering increased product complexity while decreasing time to market.
Hydraulic hoses exist on nearly every hydraulic machine. It is critical to ensure hose assemblies are fabricated with care to ensure reliability of the hose and the hydraulic system they’re part of.
This presentation covers the essentials of hydraulic hose assembly to ensure the machine is safe and dependable.
Watch the webinar: http://www.fluidpowerworld.com/webinar-proper-hose-assembly-guidelines/
Product Development Ecosystems: Defining Your Value in the Digital AgeDesign World
Medical device developers look to solve problems in healthcare with a product or service. But for some, that’s where they stop short. It is critical that medtech developers move beyond a single solution into thinking holistically about the care environment, the various motivations of users and stakeholders, and the opportunities to connect to a larger view of healthcare. Understanding the ecosystem opportunity opens the path to successful product development in the digital age. Designers need to understand how their piece of the jigsaw puzzle fits to ensure the products offering is effective and successful.
This webinar features a real-world expertise from Gecko Healthcare and the design firm that partnered in the commercialization of Gecko’s CareTRx.
Watch the webinar: http://www.medicaldesignandoutsourcing.com/product-development-ecosystems-defining-value-digital-age/
Challenges & Emerging Solutions through Micro MoldingDesign World
Micromolding is an emerging field within the vast medical market today. MTD has positioned itself over 43 years as a global leader in micro-tool fabrication and molding. This presentation will provide an overview of everyday challenges designers face when selecting a micromolding vendor due to part design, material selection, tooling designs, molding practices and metrology. We will review emerging markets where micromolding is taking the industry to the next level through various case studies. Add a new tool to your “toolbox”!
Encoder integration in 2016: New modes of installation, networking, and moreDesign World
In this webinar — Encoder integration in 2016: New modes of installation, networking, and more — we cover the latest in rotary position encoders. We explore where mechanical, optical, magnetic, and capacitive encoders excel, and what features have been added in the last few years.
Next, we review the physical permutations available to engineers for rotary position encoders — including seal options, mounting and bearing options, housings, ratings, and modular setups that have become increasingly customizable. Then we give some examples of consumer-grade designs, industrial setups, and commercial feedback applications, and which physical permutations are most common for each.
Finally we get into control electronics and the encoder signals themselves … and compare issues and capabilities and modes of measuring in resolution, interpolation, and signal processing. We define and explain commutation channels, prevention of signal degradation, the functions of automatic gain control (AGC), signal processing, and control integration as it relates to encoders in general.
Watch the webinar here: http://www.designworldonline.com/webinar-encoder-integration-2016/
Why should you make tooling with 3D printing?Design World
Every manufacturer needs to produce low volume items, such as tools, jigs and fixtures. Did you know that 3D printing/additive manufacturing is used more often for making these tools than for making production parts? In this webinar, you will learn the pros and cons of using 3D printing to make tooling for manufacturing applications along with examples.
Watch the webinar: http://www.designworldonline.com/why-should-you-make-tooling-with-3d-printing/
Ethernet or EtherCAT for Motion Control: Choosing the Right Network for Your ...Design World
With the increasing presence of EtherCAT in the motion control industry, choosing between EtherCAT and Ethernet is becoming an increasingly important question. This presentation will cover the technical differences between both methods and provide advice on how to choose between them based on application requirements. Strengths and weakness of both Ethernet and EtherCAT will be discussed including development time, ease of use, cost, and complexity.
Additionally, Galil’s DMC-500x0 EtherCAT Master and DMC-40x0 Ethernet controller will be reviewed with regards to the capabilities and advantages they can offer. This presentation is geared towards system developers looking to understand the differences, costs, and capabilities of both Ethernet and EtherCAT.
Watch the webinar: http://www.designworldonline.com/ethernet-or-ethe…r-motion-control/
New Innovations in Linear Guides for Transportation and AutomationDesign World
The automation of transportation applications such as exterior doors and people barriers can pose very challenging design requirements. New designs must meet rigid testing and environmental requirements and all moving components must reach or exceed long service life without the need for extensive and costly maintenance.
Technically innovative linear guide technology that is successful in European transportation applications are now available in North America. These linear guide bearings and telescopic slides are designed to tolerate installation misalignment and are specially coated to withstand intensive salt spray testing and outdoor operation.
Watch the webinar here: http://www.designworldonline.com/new-innovations-in-linear-guides/
Clean-in-place: how to ensure food safety while maintaining equipment effecti...Design World
Negative PR from food safety violations has never been more prevalent than in today’s interconnected world. Manufacturers are in a constant battle to provide maximum food safety while maintaining throughput.
This webinar will focus on ways to ease these seemingly conflicting goals and introduce Baumer’s broad portfolio to aid with Clean-in-place solutions.
Watch webinar here: http://www.designworldonline.com/clean-in-place-h…nt-effectiveness/
Advanced Motor Control Technologies – Part 2Design World
This webinar will present advanced motor control technologies for high volume applications such as appliances, residential fans and pumps, power tools and lawn and garden equipment. Discussion will include how advanced technologies can achieve high efficiency, compact size and low cost
Advanced Motor Control Technologies – Part 1Design World
This webinar will present advanced motor control technologies for high volume applications such as appliances, residential fans and pumps, power tools and lawn and garden equipment. Discussion will include how advanced technologies can achieve high efficiency, compact size and low cost.
Hydraulic machines are nothing without their hydraulic pumps. In this webinar, Josh Cosford describe the basic operation of a hydraulic pump. Josh describes the various types of hydraulic pumps available, as well as the merits and disadvantages to each design.
Prototype Smarter – transitioning to production faster and more effectivelyDesign World
Early prototyping using 3D printing and CNC machining can increase your speed to market. Learn about key design considerations and benefits of using both processes as well as injection molding during early prototyping stages.
Taking prototyping one step further, we will discuss how using low-volume injection molding for engineering-grade parts can help bridge you into large-scale production. You will learn valuable design considerations that are often overlooked in early product development that concern draft, wall thickness, coring, material selection and rib design.
How to Build Rotary Indexing Tables for Specific ApplicationsDesign World
This Webinar covers the design of rotary indexers for automated positioning and transfer applications. In fact, rotary indexing is key to machine design for such automation in myriad industries.
We Got a Warning Letter – Now What? How to Keep Calm in a Compliance StormDesign World
Warning Letters – 483 observations – CAPAs from a regulatory inspection! They happen to even the best of companies. And when they do happen you’ve got only 15 days to respond. A late or inadequate response could be disastrous to the company.
Wherever the remediation effort has been triggered, there are immediate steps you should take in order to help your firm navigate the remediation. This webinar will provide you with the steps necessary to reach a successful outcome.
This webinar is intended for medical device executives or those in industry who want to be prepared to deal with compliance issues or may be faced with a remediation project.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Student information management system project report ii.pdf
Innovate in new and exciting optical sensing applications in industrial markets with DLP® technology
1. Innovate in New and Exciting
Optical Sensing Applications in
Industrial Markets With Award-
winning DLPTechnology
2. q This webinar will be available afterwards at
www.designworldonline.com & email
q Q&A at the end of the presentation
q Hashtag for this webinar: #DWwebinar
Before We Start
7. DLP MEMS technology enables many industrial non-
display applications
DLP chip or DMD
Array of micromirrors
Array of micromirrors…
..that digitally switch (plus or minus)…
…to steer light.
Works with lamp, LED and Lasers
DLP technology is a fast, efficient and reliable spatial light modulator (SLM) offering:
1) High Speed switching – of the mirrors at up to 32kHz
2) Wavelength selection – Split the light into different wavelengths and smart control
3) Extended wavelength – Supporting UV, Near Infra-‐‑red in addition to Visual spectrum
10. Many methods for 3-D machine vision
Use Triangulation (Geometry) to Determine the Depth of an Object
Stereo Triangulation
or Photogrammetry
Single Line Laser Scan
Structured Light
By Different Methods:
Time of Flight
11. How it Works Why choose DLP technology?
3-D Machine Vision with DLP technology
Enabling scalable and high resolution 3-D scanning
DLP Technology Feature
Design Benefit
Optical MEMS device
Inherently non-‐‑invasive approach
High speed paSern rates
up to 32 kHz
Real-‐‑time light processing and/or
display for instant information
External Triggers
Enables easy synchronization to
external cameras and sensors
High bit depth
Higher accuracy and resolution
Extended wavelength
support 365-‐‑2500nm
Enables applications requiring UV,
Visible, or NIR light sources or
detection (unlike many other
spatial light modulators)
Small Form Factor
Portable, lower cost solutions
when combined with TI'ʹs
embedded processors
End Equipment Examples
Industrial
Metrology
Dental/Medical
Scanners
Factory
Automation
14. Food & Agriculture
Pharmaceuticals
Law Enforcement
Plastics
Petrochemicals
Medical
WHERE ARE SPECTROMETERS USED?
WHAT IS SPECTROSCOPY?
Spectroscopy is a powerful technique for recognizing and
characterizing physical materials through the variations in
absorption or emission of different wavelengths of light.
Spectroscopy requires the spreading out of light into a rainbow of
wavelengths, so that the variation in light intensity versus
wavelength can be measured and recorded.
Near-‐‑infrared (NIR) light enables analysis of liquid & solid molecules
Introduction to Spectroscopy
15. Existing NIR Spectrometer Solutions
Fixed Filter
Advantages
• Simple, low cost design
• Very compact form factor
Disadvantages
• Discrete waveband(s) only
• Very limited analytic
capability
• Mechanical
16. Existing NIR Spectrometer Solutions
Scanning Monochromator
Advantages
• Very high performance
• Wide wavelength range
• Lost cost single point
detector
Disadvantages
• Fragile rotating grating
• Large, expensive system
18. Spectroscopy with DLP technology
Enabling Innovative and affordable solutions
2. Turn on columns to
select wavelength, number
of pixels to select intensity
How it Works
Why choose DLP technology?End Equipment Examples
Feature
Design Benefit
Wavelength selection
High resolution wavelength control eliminating the
need for expensive array detector
Extended wavelength support
363-‐‑2500nm (Multiple DMD chips)
Ability to test solids, liquids and gases
Easily program scanned lines or custom
wavelength filters
Single spectral engine for multiple materials or
applications
Polarization independent aluminum
micromirrors
Eliminates fragile, temperature-‐‑sensitive, and
expensive components. Allows design of compact,
robust systems
High speed paSern rates up to 32 kHz
Acquire spectrum data for real-‐‑time material
analysis
Food Analyzer Engine Fluids
& Petrochemical
Optical Networking
ROADM (Reconfigurable optical Add-drop multiplexer
WSS (Wavelength Selective Switch)
VOA (Variable optical attenuator)
Agriculture Pharmaceutical
20. How does DLP technology improve
spectrometers? Programmability
• Adaptive control of critical scan parameters at each waveband
• Intensity
• Integration time
• Resolution
• Start & stop wavelengths
• Improve measurement sensitivity with Hadamard patterns
o Up to 7x light throughput vs. basic columns
• Perform real-time monitoring
o Complex spectral filters based on substance(s) of interest
21. Proven Leader in MEMS Manufacturing
Over 40 Million DMDs Shipped Since 1996
How does DLP technology improve spectrometers? –
Portability and Reliability
Compact Form Factor
Bring Measurements to the
Factory and Field
No Moving Parts
Robust Capability for Shock
and Vibration
Digital Mirrors
Consistent Performance over
Time & Temperature
22. DLP4500NIR Optimized for 700nm – 2500nm
• 0.45-‐‑inch Diagonal micromirror array
• 912 x 1140 resolution array (>1 Million Micromirrors)
• Diamond array orientation supports side illumination
• 1280x800 (WXGA) resolution display
• 7.6µμm Micromirror Pitch
• ±12-‐‑degree Tilt Angle
• Highly efficient steering of Near-‐‑Infrared (NIR) light
• 700-‐‑2000nm: ≥ 96% window transmission
• 2000-‐‑2500nm: ≥ 85% window transmission
• 9.10mm x 20.7mm package footprint for portable instruments
• Available in package FQE with simple connector interface
• Available in package FQD with enhanced thermal interface
• High optical throughput enables improved accuracy (SNR) and shorter
detector integration times in spectrometers, single pixel cameras, etc.
• High resolution spatial light modulation and filtering enables very
accurate paSerns for projection/measurement, particularly valuable to
displace or augment NIR detector arrays that have limited pixel counts.
• Well suited for portable and industrial instruments where reliability,
repeatability, and mobility are critical.
• Gives users reliable, independent, high-‐‑speed micromirror control to
develop industrial spectrometers, laser markers, and single pixel
cameras.
Applications
• Spectrometers (Chemical Analysis)
• Process Analyzers
• Laboratory Equipment
• Dedicated Analyzers
• Compressive Sensing (Single Pixel NIR Cameras)
• Laser Marking
• Optical Choppers
• Microscopes
• Optical Networking
• Infrared Scene Projection
• Telecom: Wavelength selective switches
Features
Benefits
Catalog Part #
Package
Body Size
DLP4500NIRFQE
FQE (80)
9.1mm x 20.7 mm
DLP4500NIRFQD
FQD(98)
9.1mm x 20.7 mm
23. DLP2010NIR Optimized for 700nm – 2500nm
• 0.2-‐‑inch Diagonal micromirror array
• 854 x 480 resolution array (400,000+ Micromirrors)
• Orthogonal array orientation supports side illumination
• 5.4µμm Micromirror Pitch
• ±17-‐‑degree Tilt Angle
• Highly efficient steering of Near-‐‑Infrared (NIR) light
• 700-‐‑2000nm: ≥ 96% window transmission
• 2000-‐‑2500nm: ≥ 90% window transmission
• 15.9-‐‑mm × 5.3-‐‑mm × 4-‐‑mm Package Size for portable instruments
• High optical throughput enables improved accuracy (SNR) and shorter
detector integration times in spectrometers, single pixel cameras, etc.
• High resolution spatial light modulation and filtering enables very
accurate paSerns for projection/measurement, particularly valuable to
displace or augment NIR detector arrays that have limited pixel counts.
• Well suited for portable and industrial instruments where reliability,
repeatability, and mobility are critical.
Applications
• Spectrometers (Chemical Analysis)
• Portable Process Analyzers
• Portable Equipment
• Compressive Sensing (Single Pixel NIR Cameras)
• 3D Biometrics
• Machine Vision
• Infrared Scene Projection
• Optical Choppers
• Microscopes
• Optical Networking
Features
Benefits
25. Jump Start Development with
What are TI Designs?
• Comprehensive designs include schematics or block
diagrams, BOMs, design files and test reports
• Created by experts with deep system and product
knowledge
• Spans TI's portfolio of analog, embedded processor and
connectivity products
• Supports a broad range of applications including
industrial, automotive, consumer, medical and more
26. Where to find DLP TI Designs?
Jump Start Development with
27. Where to find DLP TI Designs?
Jump Start Development with
28. Where to find DLP TI Designs?
Jump Start Development with
29. Accurate Point Cloud Generation for 3-D Machine Vision
Applications using DLP Technology
• Provides a 3-D scanner software solution to shorten
development time with DLP technology
• No software or optical development required for
evaluating DLP technology for generating 3-D point
clouds!
o Generates and decodes structured light patterns
o Calibrates camera and projector
• Available design files
o Schematic (http://www.ti.com/lit/pdf/tidr157)
o Bill of Materials (http://www.ti.com/lit/pdf/tidr958)
o Command-line 3D Scanner with DLP Structured Light SDK
(http://www.ti.com/lit/zip/tidc535)
o Camera Trigger Cable Assembly Guide (
http://www.ti.com/lit/df/tidu457a/tidu457a.pdf)
• Available from TI Designs
o http://www.ti.com/tool/TIDA-00254
30. Where to find software, BOM, and trigger cable
assembly guide?
1. Go to the TIDA-00254 tool page (http://www.ti.com/tool/TIDA-00254)
2. Software installer listed under Download Design Files button
3. Schematic and BOM listed under their respective buttons
31. Where is the 3-D Scanner Application and DLP
Structured Light SDK source code?
1. Go to the TIDA-00254 tool page (http://www.ti.com/tool/TIDA-00254)
2. Software installer listed under Download Design Files button (http://www.ti.com/lit/zip/tidc535)
32. Near-Infrared Spectrometer Reference Design for Optical Analysis
of Liquids & Solids
• DLP NIRscan™ EVM is a high performance,
affordable near-infrared spectrometer
• Features the DLP 0.45 WXGA NIR chipset - the
first ever DLP chipset optimized for use with
near-infrared (NIR) light
• Available design files
o Schematics and Board layout files
o Software
o Optical Engine Design
o DLP Spectrometer Design Considerations (
http://www.ti.com/lit/pdf/dlpa049)
• Available on TI Designs
o http://www.ti.com/tool/TIDA-00155
33. DLP NIRscan™ Evaluation Module
A complete evaluation module (EVM) to design
high performance, affordable NIR spectrometers.
Features
• Web Browser-based GUI
• USB & Ethernet Interfaces
• Transmissive Sampling Module
• Free Reference Design & Open Source Software
US $8499
Specifications
Wavelength Range 1350 to 2450 nm [Programmable]
Signal-‐‑to-‐‑Noise Ratio (SNR) >30,000:1
Optical Resolution 12 nm
Digital Resolution (data points per scan) 5 to 1100 [Programmable]
Scan Speed (per data point) 1.5 ms
Repeatability (typical) < 0.5%
Dimensions 197mm x 112mm x 96mm
34. DLP® NIRscan™ Nano Evaluation Module
based on DLP2010NIR
A complete EVM to design
mobile NIR spectrometers
PCBs showcase new TI silicon:
- Bluetooth Low Energy Module: CC2564MODN
- Sensors: Thermopile- TMP006 and Humidity+Temperature-
HDC1000
- Microprocessor: Tiva TM4C127
Illumination module
Optical
engine
Processor
board
DMD
board
Detector
board
DLPC150 board
Sample
window
Specifications
Wavelength Range 900 to 1700 nm [Programmable]
Optical Resolution 8 nm
Digital Resolution
(data points per scan) 5 to 1100 [Programmable]
Scan Capability Sequential and Hadamard
Illumination Module Reflective with Two Integrated Infrared Lamps
Communication Interface USB and Bluetooth
Power USB and/or baSery
Dimensions 62 mm x 58 mm x 32 mm
35. Silicon – Extensive portfolio
Development Resources and links
Extensive 3P network worldwide 20+ companies with 40+ solutions
hSp://www.ti.com/lsds/ti/analog/dlp/solutions-‐‑services.page
9 DMD chips for non-display optical sensing applications
www.ti.com/dlp3dmachinevision
www.ti.com/dlpnirscannano
Development Platforms and Software
Several EVMs starting at $599
http://www.ti.com/lsds/ti/dlp/advanced-light-control/tools.page
TI Designs and reference designs
http://www.ti.com/tool/tida-00155
http://www.ti.com/tool/TIDA-00254
36. TI DLP® Advanced Light Control Products
Innovate in exciting optical sensing applications in industrial
markets with award-winning DLP technology
Srikanth (Srik) Gurrapu
Marketing Manager,
Texas Instruments, Inc
May 12th 2015
38. Thank You
q This webinar will be available at
designworldonline.com & email
q Tweet with hashtag #DWwebinar
q Connect with Design World
q Discuss this on EngineeringExchange.com