This document provides an induction for a new construction site. It outlines the objectives of zero accidents and a safe working environment. It introduces the HSE and safety staff and describes various safety policies and procedures regarding PPE, electrical safety, scaffolding, ladders, emergencies, driving, and fall protection. Hazards are identified such as not following safety procedures, not wearing proper PPE, taking shortcuts, and slips/trips. The importance of adherence to safety rules and regulations is emphasized throughout the induction.

1. Welcome

2. HEALTH, SAFETY & ENVIRONMENTAL
INDUCTION
(738-C02)

4. Client :ROYALCOMMISSION
PrincipleContractor :KIFAHCONTRACTINGCOMPANY
SiteReference :738-C02
Location :JUBAILINDUSTRIALCITY
ProjectManager :Mr.AMRMahmoudNaguib
EH&SManager :Mr.ShamimAhmadSiddique
SITE INFORMATION

5. Organization objective
The main objective of our department is to have
 ZERO accident at site.
 Create Safe working Environment.
 Implement safety culture.
 To complete the project with ZERO accident.

6. P
o
l
i
c
y

7. About Us……
HSE Manager
 Shamim Ahmad Siddique
HSE Engineer
 Faiz Ahmed
Safety Officer
Md Irshad Ali
 Shaikh Aashiq Ali
 Shaik Mohammad
 Masood Shaik
Prajith K. R.
Manu M. P.

8. Tank Area Telecommunication Building
PROJECT?

9. WHY ACCIDENT ?
 Safety Procedure not followed.
 Proper PPEs missing.
 Shortcuts at work.
 SLIP & Trip due to obstruction & wet surface.
 Incompetency.

10. Basic Reason……..

11. Color Code
JANUARY - MARCHv
APRIL - JUNE
JULY - SEPTEMBER
OCTOBER - DECEMBER

12. S
i
g
n
a
g
e
Warning
Sign giving warning of a hazard or
danger.
Prohibited
A sign prohibiting behavior likely
to increase or cause danger.
Mandatory A sign prescribing specific
behavior to followed.
Emergency
Sign giving information on
emergency exits, first aid, or rescue
facilities

13. Red-man & Green-man
Persons operating within 02 -
10 meters
Persons operating
beyond 10 meters
Dead man - Person operating within 0-2 meters

14. Personal Protective Equipment (PPEs)

15. Mandatory PPEs

16. PPEs Related To Work
Hot Work
Working at
Height

17. Unsafe Act

18. Unsafe Condition

19. Electrical Safety
Only qualified electricians shall perform the job.
 Never use defective electrical equipment's, defective
extension cords or shop made equipment's.
 All electrical conductors shall be considered energized
unless notified.
 Use 110 V for all portable electrical tools.
 No work on exposed live conductors.
 Metal ladders shall not be used.

20. DIFFERENCES
IN TOOLS
 110 VOLT  220 VOLT

21. Do Not Use…….

22. Bad Practice
X
X

23. Scaffold
 All Scaffolding must be inspected by Trained Competent Scaffolding Inspector
before they can be used.
 Complete guardrails and other fall protection arrangements shall be made for
platforms above 1.8 m.
 It must contain Guard-rail, Mid-rail & Toe-board.
 Use ladder for access & egress while using scaffold.
 Always check for SCAF-TAG before using.
 Use Body Harness above 1.8 m.

24. X
Accepted Not Accepted

25. Safe for Use
Body Harness
Required
Do Not Use
Scaf-Tag

26. Welfare Facilities
Drinking Water.
Rest Area.
Smoking Area.
Toilet & Ablution.

27. Water Station
Cool & Sweet
drinking water
provided at site.

28. Rest Area

29. Toilet & Ablution.

30. Smoking Area

31. Recycle Area
Separate Skip for
• Wood
• Steel
• Polythene

32. Ladder
 Aluminum and steel ladder
 always maintain three points of
contact
 Don’t carry tools, equipment, or
material in your hands while
climbing
 If more than 3 metres or 10 feet
up, wear a safety harness.

33. Unsafe use of Ladder

34. Wooden
ladder is
strictly
prohibited at
site.
X

35. EMERGENCY CONTACT
Call
 0580290327 OR Ext. 9601
(PROJECT MANAGER)
 0599748039 OR Ext. 9606
0592760385
(SAFETY DEPARTMENT)
 0597391457 OR Ext. 9611
(MALE NURSE/ FIRST AID)
 0597391457
(AMBAULANCE DRIVER)

36.  From phone/mobile call.
 Say, “This is an EMERGENCY”.
 Describe the incident location.
 Describe the incident.
 Report injuries, if any.
 Give your name and other details.
 Stay on line until further instructed.
EMERGENCY PROCEDURE

37.  Know the Assembly Areas.
 In case of emergency, stop your work and
rush to the assembly area.
 Be there until advised to move.
 Participate in Roll Call / Head count.
 Look for your co-workers.
ASSEMBLY AREA

38. DRIVING AT SITE
Speed Limit (Km/Hr) Seat Belt

40.  It is the responsibility of the driver to ensure his vehicle is safe
to operate.
 Only Valid Saudi Government driving license.
 The driver is responsible for transporting the materials properly
and ensuring that a load does not exceed the manufacturer’s
design load capacity.
 Follows the traffic rule at site.
 Watch for the people moving in pedestrian and crossing point.
 Park your vehicle in parking area ONLY.
 Do not leave vehicle in start condition.
Rules……...

41. Observe

42. Identify the Hazards
Tie-Back Gate
Harness Leg
Straps
Improper Tie-
Off Location
Proper Tie-Off
Location
Standing on
Scaffold Tube
Sitting on
Railing Not
Allowed
Knot in
Lanyard
No Tie-Off
Extinguisher
Not Secured
Housekeeping

43. Thank
you.Prepared By,
Faiz Ahmed
(HSE ENGINEER)