Identify the following: Level of caudal end of subarachnoid space Epidural, subarachnoid
spaces Level of caudal end of spinal cord
Solution
Answer:-
Level of caudal end of Subarachnoid space is lower border S-2 Vertebra.
Epidural- Basically epidural space is define as the outermost part of the spinal canal.it is also
called as the epidural cavity. this space lying outside th edura meter. Dura meter enclsoed by the
subarachnoid space. it contains a lumphatics spinal nerve roots and network of internal vertebral
venous plexuses.level is L1 & L2.
Level of caudal end of spinal cord. - The Spinal cord can be defined as the long , thin tubular
bundles of nervous tissue and it supports cells and it run in vertebral column. the caudal end of
spianl cord is generaly cone shaped it is also called as the conus medullaris. and its ends at S2
level..
A brief discussion on nervous system. central nervous system its part like a short note on brain according to b.pharma 2nd semester syllabus. short note on neurones, neurotransmitter,
USMLE NEUROANATOMY 018 CSF and meninges CSF and meninges.pdfAHMED ASHOUR
While the meninges themselves are not typically the direct target of surgical procedures, they play a crucial role in neurosurgery and other related interventions. The meninges are the protective layers surrounding the brain and spinal cord, consisting of the dura mater, arachnoid mater, and pia mater.
The surgical importance of the meninges lies in their role as protective barriers and their involvement in certain medical conditions and procedure.
A brief discussion on nervous system. central nervous system its part like a short note on brain according to b.pharma 2nd semester syllabus. short note on neurones, neurotransmitter,
USMLE NEUROANATOMY 018 CSF and meninges CSF and meninges.pdfAHMED ASHOUR
While the meninges themselves are not typically the direct target of surgical procedures, they play a crucial role in neurosurgery and other related interventions. The meninges are the protective layers surrounding the brain and spinal cord, consisting of the dura mater, arachnoid mater, and pia mater.
The surgical importance of the meninges lies in their role as protective barriers and their involvement in certain medical conditions and procedure.
Write a Java program that performs these operationsPrompt the use.pdffashionbigchennai
Write a Java program that performs these operations:
Prompt the user to enter ten numbers
Print the numbers entered in the original order
Print the numbers entered in reverse order
When printing out the values, all the values should be in between square brackets [] and
separated by a single space.
Solution
Here is the solution, also I am sorting it using selection sort..
More Related Content
Similar to Identify the following Level of caudal end of subarachnoid space E.pdf
Write a Java program that performs these operationsPrompt the use.pdffashionbigchennai
Write a Java program that performs these operations:
Prompt the user to enter ten numbers
Print the numbers entered in the original order
Print the numbers entered in reverse order
When printing out the values, all the values should be in between square brackets [] and
separated by a single space.
Solution
Here is the solution, also I am sorting it using selection sort..
Write a complete PUP enabled website using WebMatrix. At the beginnin.pdffashionbigchennai
Write a complete PUP enabled website using WebMatrix. At the beginning, choose the template
of empty PHP website or empty HTML website. In the major PUP file of this site, i.e. index.php,
inside PHP script block, write PHP code to print out first 10 prime numbers inclusively starting
with 2. Print these numbers in one line and separate them with two spaces. You MUST use PHP
output statement, flow control statements for selection and loop control structures in PHP.
Solution
Need to create two files named template.php and index.php
template.php
PHP include Website Template
index.php.
Which of the following is a flaw, loophole, oversight, or error that.pdffashionbigchennai
Which of the following is a flaw, loophole, oversight, or error that makes an organization
susceptible to attack or damage?
A. Risk
B. Vulnerability
C. Threat
D. Exploit
Solution
B. Vulnerability is a flaw, loophole, oversight, or error that makes the organization susceptible to
attack or damage. All other answers are incorrect: A risk can be defined as the potential harm
that can arise from some present process or from some future event; a threat is an unwanted
event that can result in harm to an asset or service; and an exploit takes advantage of a bug,
glitch, or vulnerability..
what trade agreements were initiated by the United States and Canada.pdffashionbigchennai
what trade agreements were initiated by the United States and Canada and what were the
RESULTS of those trade agreements?
Solution
· In the negotiations, Canada retained the right to protect its cultural industries and such
sectors as education and health care. As well, some resources such as water were meant to be left
out of the agreement..
Use the series and parallel commands in Matlab to find the transfer .pdffashionbigchennai
Use the series and parallel commands in Matlab to find the transfer functions of
1. G(s) in series/parallel with H(s)
2. H(s) in series/parallel with T(s)
G(s) = (s+1)/(s^2+4s+10)
H(s) =(s ^2+5s+1)/(s^4+s^3+3s+10)
T(s) = (s+1)/(s+1)(s+2)(s+3)(s+4)
Solution
MATLAB CODE
G = tf([1,1],[1 3 0])
A.)
% SERIES CONNECTION
S = G * H
% PARALLEL CONNECTION
P = G + H
B.)
% SERIES CONNECTION
S1= H * T
% PARALLEL CONNECTION
P1= H + T.
True or False Even if there is a strong correlation between the ind.pdffashionbigchennai
True or False: Even if there is a strong correlation between the independent and dependent
variable, we may not expect that an increase in the value of the independent variable is
associated with an increase in the value of the dependent variable.
Solution
False, Strong correlation always implies increase in one variable increase the other. In the same
way decrease in one decrease the other.
This is my code but not complete, please complete my.pdffashionbigchennai
This is my code but not complete, please complete my code related by lab#4
And i wans results for output in black screen.
#include
#include
#define MAX 100;
using namespace std;
struct date
{
int day,month,year\'
};
struct STUDENT_TYPE
{
string name;
int id;
double GPA;
date DOB;
};
int i=0;
int main()
{
STUDENT_TYPE student[MAX];
int choice=-1;
while(choice!=0)
{
cout<<\"\ 0-Exit\ 1-Insert\ 2-Delete_last\ 3-Display\ 4-Search\ 5-Deletion_particular_record\ 6-
Insert_after_record\ 7-Sort(acending)\";
cout<<\"Enter your choice:\";
cin>>choice;
switch(choice)
{
case 0exit(0);
case 1:insert();break;
case 2:delete();break;
case 3:display();break;
case 4:searcht();break;
case 5:delete();break;
case 6:insert();break;
case 7:sort();break;
default:cout<<\"Wrong selection\";
}
}
return 0;
}
void insert()
{
cout<<\"Enter the student details:\";
cout<<\"student name:\";
cin>>student[i].name;
cout<<\"student id:\";
cin>>student[i].id;
cout<<\"student GPA:\";
cin>>student[i].GPA;
cout<<\"student DOB\";
cin>>student[i].DOB.day>>student[i].DOB.month>>student[i].DOB.year;
i++;
}
void delete()
{
//assign 0 to last pointed record
student[i].name=0;
student[i].id=0;
student[i].GPA=0;
student[i].DOB.day=0;student[i].DOB.month=0;student[i].DOB.year=0;
i--;
}
void display ()
{
cout<<\"student details are\ \";
for(int n=0; n>id;
for(int n=0;n>record;
for(int n=0;n>id;
for(int n=0;npos;p--)
{
// move all record towards right to make space for insertion of new record
student[p].name=student[p-1].name;
student[p].id=student[p-1].id;
student[p].GPA=student[p-1].GPA;
student[p].DOB.day=student[p-1].DOB.day;
student[p].DOB.month=student[p-1].DOB.month;
student[p].DOB.year=student[p-1].DOB.year;
}
cout<<\"enter the student details:\";
cout<<\"student name:\";
cin>>student[pos].name;
cout<<\"student id:\";
cin>>student[pos].id;
cout<<\"student GPA:\";
cin>>student[pos].GPA;
cout<<\"student DOB:\";
cin>>student[pos].DOB.day>>student[pos].DOB.month>>student[pos].DOB.year;
}
void sort()
{
// bubble sorting technique is used
struct STUDENT_TYPE TEMP[2];
for(intx=0;xstudent[y+1]id)
{
//move all the record information to temp and swap them
temp[0].name=student[j].name;
temp[j].name=student[j+1].name;
temp[j+1].name=student[0].name;
//the above three lines are repeated for all the student fields
}
}
}
}
#include
#include
#define MAX 100;
using namespace std;
struct date
{
int day,month,year\'
};
struct STUDENT_TYPE
{
string name;
int id;
double GPA;
date DOB;
};
int i=0;
int main()
{
STUDENT_TYPE student[MAX];
int choice=-1;
while(choice!=0)
{
cout<<\"\ 0-Exit\ 1-Insert\ 2-Delete_last\ 3-Display\ 4-Search\ 5-Deletion_particular_record\ 6-
Insert_after_record\ 7-Sort(acending)\";
cout<<\"Enter your choice:\";
cin>>choice;
switch(choice)
{
case 0exit(0);
case 1:insert();break;
case 2:delete();break;
case 3:display();break;
case 4:searcht();break;
case 5:delete();break;
case 6:insert();break;
case 7:sort();break;
default:cout<<\"Wrong selection\";
}
}
return 0;
}
void insert()
{
cout.
The terminology employed in factory automation is often confusing in.pdffashionbigchennai
The terminology employed in factory automation is often confusing in part because the names
are so similar and in part because the sub areas do indeed overlap. Carefully distinguish among
CIM , CAD , CAE , CAM and CAPP indicating any overlaps.
Solution
CIM(computer integrated manufacturing):
It is the approach of using computers for controling the entire production process.
This integration allows individual processes to exchange information with each other and
initiate actions among them.
It simply means the fully use of computer controlled machines and fully automation system in
manufacturing products.
CAD(computer aided design):
It is a software and is used by architects, engineers or artists for the creation of precision
drawing for technical overview. it is also helpful in the creation of 2D or 3D models.
CAE(computer aided engineering):
Is a process of solving problems related to engineering through the help of interactive graphical
software.It can be graphical or mathematical or modeling.
CAM(computer aided manufacturing):
is the software for the controlling of maching tools or to assist all the process for the
manufacturing of the machine.
CIPP(computer aided process planning):
Is the use of technology for the process and planning of a part or product in manufacturing.
CAPP is the process in between CAD and CAM. It provides the planning for the process for
producing a specific part.
///////////////////////////////////////////////////////////////// differences
////////////////////////////////////////////////////////////////
The logic is that CAD/CAM provide the tools,
CIM provides the internal logic and that is used while organizing the computers or the programs
and the information that flows among them.
Computer-aided manufacturing moto is to use the computer software to control machine tools
and related machinery(or machine parts) in the manufacturing process.
It is not technically or logically considered a system for engineering software programs, but
rather than for hardware solution.But on the other side computer aided engineering
involves the processes the software work, like the analysis or simulation part of the actual work
done..
The probability that A hits a target is 14 and the probability that.pdffashionbigchennai
The probability that A hits a target is 1/4 and the probability that B hits a target 1/3.
(a) If each fires twice, what is the probability that the target will be hit at least once?
(b) If each fire once and the target is hit only once, what is the probability that A hit the target?
Solution
probability that A hits a target = 1/4
probability that B hits a target = 1/3
a) after hitting twice, probability that the target will be hit at least once = 1 - probability that the
target is not hit at all
probability that the target is not hit at all = Probability that A does not hit the target the first time
* Probability that B does not hit the target the first time * Probability that A does not hit the
target the second time * Probability that B does not hit the target the second time
= (1 - 1/4) * (1 - 1/3) * (1 - 1/4) * (1 - 1/3)
= 3/4 * 2/3 * 3/4 * 2/3
= 1/4
after hitting twice, probability that the target will be hit at least once = 1 - 1/4 = 3/4
------------------------------------------
b)If each fire once and the target is hit only once, the probability that A hit the target =
probability that A hit the target * probability that B missed + probability that A hit the target *
probability that B hit the target
= 1/4 * (1 - 1/3) + 1/4 * 1/3
= 1/4 * 2/3 + 1/4 * 1/3
= 1/4.
Step 2 Formulate a HypothesisFormulate a hypothesis by making an .pdffashionbigchennai
Step 2: Formulate a Hypothesis
Formulate a hypothesis by making an explicit statement about the cause of the common cold
based on the observations and generalizations you made in Step 1.
based on the 3 things below
HypothesisObservation 1: Common cold is caused by bacterial or viral infection and transmitted
from one person to other through droplets from infected person. The person infected with
common cold show protect his nose or mouth with steril mask, which covers mouth and nose. If
nose or mouth is not covered by mask, droplets can transmit common cold to many people in
surrounding environment.
Observation 2: Common cold is widely transmitted very easily, if a person infected with
common cold and he sneezes in public places which is having high population, several thousands
of droplets can be transported through air at onetime, when person sneezes, so avoid moving in
public places when common cold is rampant in specific area.
Observation 3: Doctors who examine the persons suffering with common cold should be careful,
the physician should use antibiotics or vaccines to prevent common cold infection.
Solution
The hypothesis is this statement:
Common cold is a viral infectious disease which can be transmistted from one person to another
on sneezing.It can be prevented by taking antibiotics and vaccines by the physicians while
check-up..
Since the directions of v and a are entirely independent of each othe.pdffashionbigchennai
Since the directions of v and a are entirely independent of each other the derivative of the speed
d|b|/dt can take any value between -|a| and + |a| including plusminus |a|. True False
Solution
False
Though direction of change of velocity with respect to time is independent of velocity, The the
magnitude of change of velocity with respect to time always represent accleration |a|, and its
value can be +/-|a|.
Reaction StatisticsBackgroundWhen collecting experimental data f.pdffashionbigchennai
Reaction Statistics
Background
When collecting experimental data from chemical reactions, it’s often useful to generate
statistics based on the data. One experimental measure is the reaction rate in moles per second,
representing the amount of product formed per unit time. If we have a set of these reaction rates
collected in a data file, we can calculate summary statistical information, such as the minimum
and maximum values, the arithmetic mean, variance, and standard deviation.
Finding the minimum and maximum are straightforward: we scan through all the data, and keep
track of the smallest and largest values encountered. The arithmetic mean (or average) is defined
as:
m = (X1+X2+…+Xn)/n
where n is the number of reaction rates, and xi represents one experimental reaction rate. Once
you have the arithmetic mean, the variance can be calculated as the mean of the squares of the
deviations from the mean:
v= ((Xn-m)^2+(X2 – m^2) + …+(Xn-m)^2)/n
where n is the number of reaction rates, xi represents one experimental reaction rate, and m is the
arithmetic mean of the reaction rates. Once you have the variance, you can calculate the
standarddeviation as:
s = sqrt(v)
Assignment
You will develop a C program that reads data from an input text file containing chemical
reaction rates (in moles per second), and computes the minimum, maximum, arithmetic mean,
variance, and standard deviation for that set of data. Your instructor will provide input text files,
which will each contain a series of double values, each on a line of its own within the file. Your
program will read one of these input files into an array of doubles (i.e., it will populate the array
using the data values from the file). Your program will then calculate statistics using that array of
doubles, and will write the results out to a separate output text file.
The goals of this assignment are to provide you with experience reading and writing text data
files, provide you with experience passing an array into a function, and give you more
experience organizing your program into separate C functions.
When defining your C functions, you may either:
Define the functions before they are used by any other functions, OR
Place function prototypes near the top of your code (after all #include directives), and then define
the functions in any order.
Part 1 – Opening Files and Reading Data
Create a new Visual Studio Win32 Console project named reactionstats. Create a new C source
file named project4.c within that project. At the top of the source file, #define
_CRT_SECURE_NO_WARNINGS, and then include stdio.h, math.h, stdlib.h, stdbool.h, and
float.h.
Inside your main function, define the following:
A one-dimensional array of 600 doubles. They do not need to be initialized to anything at this
stage.
An integer variable to hold the number of elements in the array, initialized using the approach
demonstrated in class, using sizeof.
A FILE pointer variable, which will refer to the input data text file..
Please explain in detaile the European debt crisisSolutionIn 2.pdffashionbigchennai
Please explain in detaile the European debt crisis
Solution
In 2007, EU economies, on the surface, seemed to be doing relatively well – with positive
economic growth and low inflation. Public debt was often high, but (apart from Greece) it
appeared to be manageable assuming a positive trend in economic growth.
However, the global credit crunch changed many things.
EU Bond Yields
Uncompetitiveness
Eurozone countries with debt problems are also generally uncompetitive with a higher inflation
rate and higher labour costs. This means there is less demand for their exports, higher current
account deficit and lower economic growth. (The UK became uncompetitive, but being outside
the Euro, the Pound could depreciate 20% restoring competitiveness.
Poor Prospects for Growth
People have been selling Greek and Italian bonds for two reasons. Firstly because of high
structural debt, but also because of very poor prospects for growth. Countries facing debt crisis
have to cut spending and implement austerity budgets. This causes lower growth, higher
unemployment and lower tax revenues. However, they have nothing to stimulate economic
growth.
Individual Cases
Greece’s Case
In early 2010 these difficult developments reflected in rising spreads on sovereign bond yields
between the affected peripheral member states of Greece, Ireland, Portugal and Spain, and most
notably Germany. The Greek yield diverged in early 2010 with Greece needing eurozone
assistance by May 2010. Greece received two bailouts from the EU over the following five years
during which the country adopted EU-mandated austerity measures to cut costs while
experiencing a further economic recession as well as social unrest. In June 2015 Greece, with
divided political and fiscal leadership and a continued recession, was facing a sovereign default.
However, on July 5, 2015 the Greek people voted against further EU austerity measures, with a
possibility of Greece leaving the European Monetary Union entirely. The withdrawal of a nation
from the EMU is unprecedented, and the speculated effects on Greece\'s economy if the currency
is returned to the drachma range from total economic collapse to a surprise recovery.
Ireland Case
Ireland followed Greece in requiring a bailout in November 2010, with Portugal next in May
2011. Italy and Spain were also vulnerable, with Spain requiring official assistance in June 2012
along with Cyprus. By 2014, Ireland, Portugal and Spain, due to various fiscal reforms, domestic
austerity measures and other unique economic factors, all successfully exited their bailout
programs requiring no further assistance. The road to full economic recovery is still underway.
Cyprus, too, reported a slow but steady ongoing recovery, averting further financial crisis thus
far.
Summary of Main Causes of Debt Crisis.
Part 1 Many phone companies are replacing the wire in their phone s.pdffashionbigchennai
Part 1: Many phone companies are replacing the wire in their phone systems with fiber optic
cable. Name at least two advantages they expect to gain from doing so. In one paragraph each,
describe why fiber optic cable gives each advantage.
Part 2: Explain the difference between an amplifier and a repeater for transmitting data over
distances. In your answer, tell why repeaters are preferred for digital data.
Part 3: Explain why a hardware timer that can generate interrupts is necessary to support
concurrent processing.
Part 4: Explain why a graphical or window-based operating system interface is more readily
amenable to running multiple tasks than is a command line interface.
Part 5: What is the spectrum of a signal? What is the relationship between the spectrum of a
signal and the bandwidth of a channel? (Use the textbook; you\'ll likely get a wrong answer from
a web search!)
Part 6: Name and briefly describe the three characteristics of a sine wave signal that can be
modulated to allow the signal to carry information.
Part 7: Explain how frequency division multiplexing can be used to carry two or more
independent information streams on one communication medium.
Part 8: A modern CPU has a bit that can place the CPU in the system state or the application
state. Briefly describe the difference between \"system state\" and \"application state.\"
Part 9: What does it mean to \"mount\" or \"unmount\" a storage device? Explain why
unmounting a device is necessary in the Windows operating system.
Part 10: Explain what it means to bootstrap a computer. In your answer, describe the steps
executed by the hardware and software in bootstrapping a computer that is initially turned off.
Solution
Part 1:
Due to much lower attenuation and interference, provides long distance, Fiber optic signals are
stronger.These are much thinner and lighter than metal wires.Data can be transmitted digitally.It
has less susceptible to interference.
Part 2:
An amplifier can not discriminate between the intended signal and noise,it amplifies equally
everything fed into it.A repeater does not amplify the signal.It regenerates the signal.When it
receives a weakened or corrupted signal,it creates a copy,bit for bit at the original strength. A
repeater is a regenerator.
Using the large number of amplifiers over a long, lossy link inevitablyincreases the noise and
decreases the signal to noise levels.A repeater is usually a receiver followed by a regenerating
logic and transmitter.In this case regeneration receives the digital signals and retimes it to
remove jitter and then retransmits it with minimal baseband noise.
Part 4:
Graphical User Interface uses graphics along with a keyboard and mouse,to provide an easy to
use interface to a program.It provides windows,pulldown menus,buttons,scrollbars,iconic
images,wizards and other icons and the mouse to enable the users to interact with the operating
system. users easy to control,manipulate and toggle through multiple programs and fo.
Mary is an excellent waitress. In the restaurant, she can easily hand.pdffashionbigchennai
Mary is an excellent waitress. In the restaurant, she can easily handle 8 tables at a time without
getting overloaded/overworked. During a normal day the restaurant has an an average of 4 tables
to serve at a time. What is the probability Mary will be overworked in a given day? (Hint: Find
the probability there are more than 8 tables occupied)
Solution
This is a Poisson distribution with random variable X= no of tables Mary handles at a time
having a Poisson distribution with mena value = 4
P(X>8) = 0.0214
Prob for Mary overworking is 0.0214.
List three characteristics that influence the rate of simple diffusi.pdffashionbigchennai
List three characteristics that influence the rate of simple diffusion of small molecules.
Solution
Answer= Three characteristics that influence the rate of simple diffusion of small molecules
1] Particle size = Rate of diffusion is inversaly proportional to particle size
Since the heat of environment is the energy source for diffusion the smaller particles moves at a
faster rate than larger paricles at a given temperature
2] temperature = Rate of diffusion is directly proportional to temperature
As temperature increses rate of diffusion also increases
At high temp. particles move faster because more energy is available to diffuse them
3] Concentration difference = rate of increses as conc. difference increases
The substance diffusing between 2 areas exibits a conc. diffference as the particle diffuse from
one side of the wall to other side
4] particle distance = rate of diffusion is directly proportional to particle distance
it takes longer for a particle to diffuse when it is further away than it does for a particle that is
closer to the point of diffusion.
Its all worked out, but Im still very confused by the steps .pdffashionbigchennai
It\'s all worked out, but I\'m still very confused by the steps they took to get each part. Like why
multiply everything by (x^2 + 9) and then in the next step, how did they end up with those
answers? I\'m just very confused.
Solution
they just multiplide (x^2 + 9) for simpification
LIKE EXAMPLE
eq 2+3=5
if we multify both sides with 2
(2+3)2=5*2
10=10
equality not changed ,,,like we use this in mathematics
after solving eq they got X parameters and they cheked in original eq.
Is the world overpopulated What are the arguments for the notion th.pdffashionbigchennai
Is the world overpopulated? What are the arguments for the notion that the world is
overpopulated? What are some alternative approaches to this topic?
Solution
The human popualtion has been growing ever since the evolution of mankind. Overpopulation is
a condition when the population exceeds the carrying capacity of the environment. There is
continuous increase in the birth rate and a significant decrease in the mortality rate. This results
in increase in population at an alarming rate. The population of the world is predicted to keep on
rising 2050. The sources and resources are being exhausted. This would lead to environment\'s
inability to support life, reduced quality of life..
In the ellipse shown below, each point marked with a dot is called a(.pdffashionbigchennai
In the ellipse shown below, each point marked with a dot is called a(n) _____ A. vertex B.
focus C. axis D. center
Solution
The 2 points shown in the figure are the
B. focus of the ellipse
Vertex are points that lie on the ellipse
Axis are lines which lie in the ellipse
Center is at the \"center\" of ellipse..
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Identify the following Level of caudal end of subarachnoid space E.pdf
1. Identify the following: Level of caudal end of subarachnoid space Epidural, subarachnoid
spaces Level of caudal end of spinal cord
Solution
Answer:-
Level of caudal end of Subarachnoid space is lower border S-2 Vertebra.
Epidural- Basically epidural space is define as the outermost part of the spinal canal.it is also
called as the epidural cavity. this space lying outside th edura meter. Dura meter enclsoed by the
subarachnoid space. it contains a lumphatics spinal nerve roots and network of internal vertebral
venous plexuses.level is L1 & L2.
Level of caudal end of spinal cord. - The Spinal cord can be defined as the long , thin tubular
bundles of nervous tissue and it supports cells and it run in vertebral column. the caudal end of
spianl cord is generaly cone shaped it is also called as the conus medullaris. and its ends at S2
level.
