This book aims to be a comprehensive guide to IceHrm. We’ll cover topics such as installing IceHrm and getting it up and running, configuring IceHrm and using icehrm modules.
http://icehrm.com
The document contains code for several engineering design problems in MATLAB. It includes code to:
1. Design a shaft given inputs of power, rpm, allowable stress, factor of safety, length, and density. It calculates the shaft diameter and weight.
2. Calculate the material saving if a hollow shaft is used instead of a solid shaft, assuming the same input parameters from the first problem.
3. The code demonstrates other engineering design problems can be solved programmatically in MATLAB, such as calculating shape dimensions based on inputs and performing structural analysis calculations.
This document discusses trends and future perspectives in automotive materials. It covers the following topics:
1. The School of Mechanical and Building Sciences at VIT University has established automotive research centers in collaboration with automotive industry partners to conduct research and consultancy projects.
2. The document discusses the history of automobile frames from early X frames to modern monocoque frames. It also covers design requirements for frames including ductile-to-brittle transition temperatures.
3. Current automotive materials and processes are discussed for engines, suspensions, and other components. The use of composites, especially natural fiber composites, is increasing in automotive applications.
4. Future directions may include multi-
The document outlines a 10-step process for preliminary aircraft configuration design and propulsion system integration. It involves selecting the overall configuration, fuselage layout, propulsion system type and layout, wing and empennage design parameters, landing gear type, and integrating major systems. The goal is to perform initial sizing, modeling, analysis and iteration to develop a feasible preliminary design that meets mission requirements.
design and manufacturing by using cnc plasma cutting machine.docxMahamad Jawhar
The document summarizes a student project on optimizing cutting parameters for a CNC plasma cutting machine. It includes sections on the devices used in plasma cutting, the design of experiments conducted to determine optimal settings, experimental measurements and results, and an analysis of the results. The objective of the project was to determine cutting speed, arc current, and gas pressure levels that achieve maximum material removal rate and minimum surface roughness. Experiments were conducted varying these process parameters, and analysis of variance and grey relational analysis were used to evaluate the results and identify optimal parameter settings.
This document is the final year project report submitted by two mechanical engineering students at the University of Nairobi. It details the computer aided design of a screw jack. The report includes sections on the classification of screw threads, components of a screw jack, selection of materials, and the design procedure adopted from a machine elements textbook. It also describes how the design procedure was coded in Matlab to provide fast, efficient solutions based on input material properties and design requirements such as lift and load. The goal was to develop a screw jack design process and program that can be used by designers.
PRELIMINARY DESIGN APPROACH TO WING BOX LAYOUT AND STRUCTURAL CONFIGURATIONLahiru Dilshan
This is an assignment that was done to design the basic layout of the aircraft wing and structural configuration. Key aspects of the assignment are to design the structural layout, identify the basic component, identify the structural arrangement
This document provides an overview of a seminar presentation on supersonic planes. It includes sections on the introduction, history, theories, engine types, and applications of supersonic flight. The presentation was given by Jahani and Abdolzade for a fluid mechanics course taught by Dr. Hoseinalipour in spring 2013.
The document contains code for several engineering design problems in MATLAB. It includes code to:
1. Design a shaft given inputs of power, rpm, allowable stress, factor of safety, length, and density. It calculates the shaft diameter and weight.
2. Calculate the material saving if a hollow shaft is used instead of a solid shaft, assuming the same input parameters from the first problem.
3. The code demonstrates other engineering design problems can be solved programmatically in MATLAB, such as calculating shape dimensions based on inputs and performing structural analysis calculations.
This document discusses trends and future perspectives in automotive materials. It covers the following topics:
1. The School of Mechanical and Building Sciences at VIT University has established automotive research centers in collaboration with automotive industry partners to conduct research and consultancy projects.
2. The document discusses the history of automobile frames from early X frames to modern monocoque frames. It also covers design requirements for frames including ductile-to-brittle transition temperatures.
3. Current automotive materials and processes are discussed for engines, suspensions, and other components. The use of composites, especially natural fiber composites, is increasing in automotive applications.
4. Future directions may include multi-
The document outlines a 10-step process for preliminary aircraft configuration design and propulsion system integration. It involves selecting the overall configuration, fuselage layout, propulsion system type and layout, wing and empennage design parameters, landing gear type, and integrating major systems. The goal is to perform initial sizing, modeling, analysis and iteration to develop a feasible preliminary design that meets mission requirements.
design and manufacturing by using cnc plasma cutting machine.docxMahamad Jawhar
The document summarizes a student project on optimizing cutting parameters for a CNC plasma cutting machine. It includes sections on the devices used in plasma cutting, the design of experiments conducted to determine optimal settings, experimental measurements and results, and an analysis of the results. The objective of the project was to determine cutting speed, arc current, and gas pressure levels that achieve maximum material removal rate and minimum surface roughness. Experiments were conducted varying these process parameters, and analysis of variance and grey relational analysis were used to evaluate the results and identify optimal parameter settings.
This document is the final year project report submitted by two mechanical engineering students at the University of Nairobi. It details the computer aided design of a screw jack. The report includes sections on the classification of screw threads, components of a screw jack, selection of materials, and the design procedure adopted from a machine elements textbook. It also describes how the design procedure was coded in Matlab to provide fast, efficient solutions based on input material properties and design requirements such as lift and load. The goal was to develop a screw jack design process and program that can be used by designers.
PRELIMINARY DESIGN APPROACH TO WING BOX LAYOUT AND STRUCTURAL CONFIGURATIONLahiru Dilshan
This is an assignment that was done to design the basic layout of the aircraft wing and structural configuration. Key aspects of the assignment are to design the structural layout, identify the basic component, identify the structural arrangement
This document provides an overview of a seminar presentation on supersonic planes. It includes sections on the introduction, history, theories, engine types, and applications of supersonic flight. The presentation was given by Jahani and Abdolzade for a fluid mechanics course taught by Dr. Hoseinalipour in spring 2013.
This document outlines the design, material testing, and construction of a composite chassis for Edith Cowan University's 2010 Formula SAE race car. Key points:
- An extensive material testing program was conducted to determine the optimal composite panel configuration for strength, stiffness, and safety.
- Various core thicknesses, skin materials, and fiber orientations were tested to evaluate their effects on the panel properties.
- The final design utilized a "cut and fold" construction with carbon fiber-skinned aluminum honeycomb panels, which provided high strength and stiffness relative to weight.
- The report details the panel testing process, attachment point design, and construction of the composite monocoque chassis.
The document provides an overview of Body-in-White (BIW) in automobile manufacturing. It discusses:
1. What BIW refers to - the stage where the car body sheet metal is assembled but before other components are added.
2. The main purposes of body design including aesthetics, structure, ergonomics, safety, aerodynamics, and insulation.
3. The two main types of body structures - monocoque and frame mounted. It provides descriptions and diagrams of each.
This document discusses aircraft materials. It reviews basic requirements for aircraft materials including high strength, stiffness, corrosion resistance, and fatigue resistance. The main aircraft materials discussed are aluminum alloys, magnesium alloys, titanium alloys, and composite materials. Specific aluminum alloys used in aircraft include the 2XXX, 6XXX, and 7XXX series. Magnesium alloys provide benefits of low density and high specific strength but have challenges with corrosion resistance and formability. Titanium alloys have high strength at high temperatures but also have high costs. Composite materials typically use a polymer matrix reinforced with fibers like carbon, glass, or aramid.
This document is an aircraft design project report for a twin engine business jet. It includes dimensions, weight configurations, and performance parameters for 20 existing medium business jets analyzed to determine ideal specifications for the new design. Weight estimation was conducted and various design elements were researched and selected, including a cantilever low wing with tapered airfoils. Performance calculations and graphs were included to analyze the 17-seater twin turbofan jet, which will have a maximum speed of 750mph. The report concludes with future work plans and references.
This document discusses embryology as described in the Quran and compares it to historical scientific beliefs. It outlines the main stages of embryo development mentioned in the Quran: the alaqa stage (leech-like clot), mudgha stage (chewed-like lump), bone formation, the fetus stage, and development of hearing and sight. The Quran is shown to accurately describe the progression from fluid to clot to lump to bones to flesh to a complete creature. The conclusion is that Quranic verses give an accurate depiction of embryonic development that aligns with modern embryology.
Composite materials for automotive exteriorsSohail AD
Composite materials have been used in automotive exteriors since the 1930s. They provide benefits like reduced weight, improved strength and design flexibility. Sports cars extensively use carbon fiber composites for their exteriors due to requirements for high strength and stiffness. Composite materials are also used in truck and trailer body panels. While composites provide advantages, challenges remain around manufacturing volumes, repairs and supply chain development.
Project powerpoint presentation on Materials used in automotive industries Vidyasagar Ghantoji
This document provides an overview of materials used in automotive industries. It discusses the chassis and frame, which is made of galvanized steel, aluminum, and other alloys. It also discusses the different types of frames like ladder, backbone, and monocoque frames. Other automotive components discussed include the engine, which uses materials like iron, steel, aluminum, and composites. Additional components and their materials mentioned include tires made of rubber, lights made of plastics, and an electrical system containing copper. The document concludes by acknowledging those who provided guidance for the project.
Design mini-project for TY mechanical studentsRavindra Shinde
In these project, we have designed a lifting table suitable to use in college . By adjusting the height of table any student can have proper sitting posture and position. It is also helpful for programmers/coders who have to seat for a long time, by having such a table they can do coding in a standing position too.
This Slides explains the process of car door manufacturing which is already practised in industries. Many concepts which are really important for mechanical undergrads are explained hereby.
This document discusses the benefits of exercise for both physical and mental health. It states that regular exercise can improve cardiovascular health, reduce symptoms of depression and anxiety, enhance mood, and reduce stress levels. The document also mentions that even moderate exercise for 30 minutes per day can lead to these positive health effects.
This document is a training manual for the V2500-A5 aircraft engine published by Lufthansa Technical Training GmbH in January 2001. It contains diagrams of engine components labeled with numbers, and pages for trainees to identify the components and describe their purpose. The manual is marked as for training purposes only and copyright is held by Lufthansa Technical Training GmbH.
This document is a list of effective pages for a Pratt & Whitney Canada maintenance manual. It includes over 150 sections covering topics like description and operation, fault isolation, maintenance practices, servicing, removal/installation, and inspection check for a turboprop engine. Each section includes multiple pages dated between February 2000 to May 2012. This list provides the chapter, section, page number, and date for the maintenance manual.
The document outlines a project to develop an artificial stability augmentation system (USAS) for unmanned aerial vehicles. It discusses the mission objectives, an overview of design alternatives, specifications for the system design, and a risk assessment plan. A project plan is presented, including an organizational chart, work breakdown structure, schedule, cost estimates, and required facilities and resources.
1. The blank length for a section is calculated using the formula: Blank length = Total section dimension - 2 x No of bends x Thickness.
2. The blank size for a cup shaped job is calculated using the formula: Blank size = √(d^2 + 4dh), where d is the diameter and h is the height.
3. The force required for punching/piercing is calculated using the formula: Force = S x P x T, where S is the shear strength of material, P is the perimeter of punched/pierced section, and T is the thickness.
Effect OF DRAG CO-EFFICIENT ON THE aerodynamic PERFORMANCE OF THE VEHICLEArup Kumar Sikdar
1) The document discusses the effect of drag coefficient on vehicle aerodynamic performance and various methods to reduce aerodynamic drag.
2) It outlines computational fluid dynamics (CFD) simulations conducted on vehicle models with and without vortex generators to analyze their effect on drag coefficient.
3) The results show that the model with vortex generators had lower drag and lift coefficients than the baseline model, indicating vortex generators can effectively reduce aerodynamic drag.
Structural Analysis and Optimization for Spar Beam of an AircraftIRJET Journal
This document summarizes a study analyzing and optimizing the structural design of a tapered spar beam for an aircraft wing. The study involved creating a geometric model of the spar beam, applying loads and boundary conditions representative of flight loading, conducting a finite element analysis to determine stresses and displacements, and performing topological optimization to reduce weight. Key results were stresses of up to 38 MPa at the fixed end of the beam, displacements of up to 3.1 mm at the free end, and a 40% reduction in web weight achieved through topological optimization while maintaining structural integrity. The optimized design demonstrated potential to strengthen the spar beam structure while reducing material usage and weight.
What is a continuous structure?
How to analyse the vibration of string, bars and shafts?
How to analyse the vibration of beams?
#WikiCourses
https://wikicourses.wikispaces.com/Topic+Vibration+of+Continuous+Structures
https://eau-esa.wikispaces.com/Vibration+of+structures
This document provides an overview of Team Vega, a student formula team from JSS Academy of Technical Education, Noida. It describes the vehicle design including dimensions, materials used, analysis conducted, suspension geometry, steering, brakes, engine and powertrain selection and specifications. It also includes information on the project timeline, costs, facilities and an overview of the key vehicle specifications.
This document provides an overview of the EmpXtrack HR software free trial. It covers enrollment, key logins, exploring employee data, the manager portal, leave management, payroll processing, appraisal configuration, and next steps. The goal is to help users understand how to use the main features of EmpXtrack during the free trial period.
This document provides a 10 step guide for implementing a CRM system successfully. It recommends defining important processes, choosing a web-based solution, testing systems, appointing project leaders, cleaning data, training users, following up on functionality, and making the system mandatory to use. The goal is to focus on key processes, get buy-in from important stakeholders, and continuously improve how the CRM supports business needs.
This document outlines the design, material testing, and construction of a composite chassis for Edith Cowan University's 2010 Formula SAE race car. Key points:
- An extensive material testing program was conducted to determine the optimal composite panel configuration for strength, stiffness, and safety.
- Various core thicknesses, skin materials, and fiber orientations were tested to evaluate their effects on the panel properties.
- The final design utilized a "cut and fold" construction with carbon fiber-skinned aluminum honeycomb panels, which provided high strength and stiffness relative to weight.
- The report details the panel testing process, attachment point design, and construction of the composite monocoque chassis.
The document provides an overview of Body-in-White (BIW) in automobile manufacturing. It discusses:
1. What BIW refers to - the stage where the car body sheet metal is assembled but before other components are added.
2. The main purposes of body design including aesthetics, structure, ergonomics, safety, aerodynamics, and insulation.
3. The two main types of body structures - monocoque and frame mounted. It provides descriptions and diagrams of each.
This document discusses aircraft materials. It reviews basic requirements for aircraft materials including high strength, stiffness, corrosion resistance, and fatigue resistance. The main aircraft materials discussed are aluminum alloys, magnesium alloys, titanium alloys, and composite materials. Specific aluminum alloys used in aircraft include the 2XXX, 6XXX, and 7XXX series. Magnesium alloys provide benefits of low density and high specific strength but have challenges with corrosion resistance and formability. Titanium alloys have high strength at high temperatures but also have high costs. Composite materials typically use a polymer matrix reinforced with fibers like carbon, glass, or aramid.
This document is an aircraft design project report for a twin engine business jet. It includes dimensions, weight configurations, and performance parameters for 20 existing medium business jets analyzed to determine ideal specifications for the new design. Weight estimation was conducted and various design elements were researched and selected, including a cantilever low wing with tapered airfoils. Performance calculations and graphs were included to analyze the 17-seater twin turbofan jet, which will have a maximum speed of 750mph. The report concludes with future work plans and references.
This document discusses embryology as described in the Quran and compares it to historical scientific beliefs. It outlines the main stages of embryo development mentioned in the Quran: the alaqa stage (leech-like clot), mudgha stage (chewed-like lump), bone formation, the fetus stage, and development of hearing and sight. The Quran is shown to accurately describe the progression from fluid to clot to lump to bones to flesh to a complete creature. The conclusion is that Quranic verses give an accurate depiction of embryonic development that aligns with modern embryology.
Composite materials for automotive exteriorsSohail AD
Composite materials have been used in automotive exteriors since the 1930s. They provide benefits like reduced weight, improved strength and design flexibility. Sports cars extensively use carbon fiber composites for their exteriors due to requirements for high strength and stiffness. Composite materials are also used in truck and trailer body panels. While composites provide advantages, challenges remain around manufacturing volumes, repairs and supply chain development.
Project powerpoint presentation on Materials used in automotive industries Vidyasagar Ghantoji
This document provides an overview of materials used in automotive industries. It discusses the chassis and frame, which is made of galvanized steel, aluminum, and other alloys. It also discusses the different types of frames like ladder, backbone, and monocoque frames. Other automotive components discussed include the engine, which uses materials like iron, steel, aluminum, and composites. Additional components and their materials mentioned include tires made of rubber, lights made of plastics, and an electrical system containing copper. The document concludes by acknowledging those who provided guidance for the project.
Design mini-project for TY mechanical studentsRavindra Shinde
In these project, we have designed a lifting table suitable to use in college . By adjusting the height of table any student can have proper sitting posture and position. It is also helpful for programmers/coders who have to seat for a long time, by having such a table they can do coding in a standing position too.
This Slides explains the process of car door manufacturing which is already practised in industries. Many concepts which are really important for mechanical undergrads are explained hereby.
This document discusses the benefits of exercise for both physical and mental health. It states that regular exercise can improve cardiovascular health, reduce symptoms of depression and anxiety, enhance mood, and reduce stress levels. The document also mentions that even moderate exercise for 30 minutes per day can lead to these positive health effects.
This document is a training manual for the V2500-A5 aircraft engine published by Lufthansa Technical Training GmbH in January 2001. It contains diagrams of engine components labeled with numbers, and pages for trainees to identify the components and describe their purpose. The manual is marked as for training purposes only and copyright is held by Lufthansa Technical Training GmbH.
This document is a list of effective pages for a Pratt & Whitney Canada maintenance manual. It includes over 150 sections covering topics like description and operation, fault isolation, maintenance practices, servicing, removal/installation, and inspection check for a turboprop engine. Each section includes multiple pages dated between February 2000 to May 2012. This list provides the chapter, section, page number, and date for the maintenance manual.
The document outlines a project to develop an artificial stability augmentation system (USAS) for unmanned aerial vehicles. It discusses the mission objectives, an overview of design alternatives, specifications for the system design, and a risk assessment plan. A project plan is presented, including an organizational chart, work breakdown structure, schedule, cost estimates, and required facilities and resources.
1. The blank length for a section is calculated using the formula: Blank length = Total section dimension - 2 x No of bends x Thickness.
2. The blank size for a cup shaped job is calculated using the formula: Blank size = √(d^2 + 4dh), where d is the diameter and h is the height.
3. The force required for punching/piercing is calculated using the formula: Force = S x P x T, where S is the shear strength of material, P is the perimeter of punched/pierced section, and T is the thickness.
Effect OF DRAG CO-EFFICIENT ON THE aerodynamic PERFORMANCE OF THE VEHICLEArup Kumar Sikdar
1) The document discusses the effect of drag coefficient on vehicle aerodynamic performance and various methods to reduce aerodynamic drag.
2) It outlines computational fluid dynamics (CFD) simulations conducted on vehicle models with and without vortex generators to analyze their effect on drag coefficient.
3) The results show that the model with vortex generators had lower drag and lift coefficients than the baseline model, indicating vortex generators can effectively reduce aerodynamic drag.
Structural Analysis and Optimization for Spar Beam of an AircraftIRJET Journal
This document summarizes a study analyzing and optimizing the structural design of a tapered spar beam for an aircraft wing. The study involved creating a geometric model of the spar beam, applying loads and boundary conditions representative of flight loading, conducting a finite element analysis to determine stresses and displacements, and performing topological optimization to reduce weight. Key results were stresses of up to 38 MPa at the fixed end of the beam, displacements of up to 3.1 mm at the free end, and a 40% reduction in web weight achieved through topological optimization while maintaining structural integrity. The optimized design demonstrated potential to strengthen the spar beam structure while reducing material usage and weight.
What is a continuous structure?
How to analyse the vibration of string, bars and shafts?
How to analyse the vibration of beams?
#WikiCourses
https://wikicourses.wikispaces.com/Topic+Vibration+of+Continuous+Structures
https://eau-esa.wikispaces.com/Vibration+of+structures
This document provides an overview of Team Vega, a student formula team from JSS Academy of Technical Education, Noida. It describes the vehicle design including dimensions, materials used, analysis conducted, suspension geometry, steering, brakes, engine and powertrain selection and specifications. It also includes information on the project timeline, costs, facilities and an overview of the key vehicle specifications.
This document provides an overview of the EmpXtrack HR software free trial. It covers enrollment, key logins, exploring employee data, the manager portal, leave management, payroll processing, appraisal configuration, and next steps. The goal is to help users understand how to use the main features of EmpXtrack during the free trial period.
This document provides a 10 step guide for implementing a CRM system successfully. It recommends defining important processes, choosing a web-based solution, testing systems, appointing project leaders, cleaning data, training users, following up on functionality, and making the system mandatory to use. The goal is to focus on key processes, get buy-in from important stakeholders, and continuously improve how the CRM supports business needs.
The document is a user manual for an Access Control & Time Attendance Management System. It contains 10 chapters that describe:
1) The software installation process and requirements
2) An overview of the system's functional properties and main sub-systems
3) Instructions for user management, attendance management, device management, and system maintenance features.
4) Details on setting up departments, registering and managing users, connecting devices, and generating various reports.
CauveHRM is a human resource management software that allows companies to manage all aspects of HR including employee records, leave management, time tracking, benefits administration, and more. It is a web-based application that can be installed on a local server. The document provides instructions on downloading, installing, and using the main modules of CauveHRM.
This document provides a summary of key considerations for implementing SuccessFactors Employee Central. It recommends assigning a dedicated systems administrator, optimizing the job information section, identifying integration points early, limiting the number of workflows, creating minimal permission roles, and limiting the migration of historical legacy data. The overall implementation process for a cloud-based HR solution like Employee Central requires hands-on work across several stages and a technical administrator is critical to a successful project.
The document discusses designing an ERP system for an organization. It begins by describing problems with the organization's current systems, such as disorganized data storage and a lack of integration between departments. It then outlines the proposed new system, including assigning a database administrator, implementing customer IDs to automatically update records, and adding security features like VPN. The document also covers designing the database structure, transaction processing system, and management information/decision support systems. It provides database table designs and establishes a project plan with a Gantt chart. The goal of the new ERP system is to improve processes like inventory management and customer service.
Windows has announced it will be phasing out support on its Windows XP, with no support offered after April 8th, 2014. If you’re still using XP as your main operating system or have old computers running XP then it’s time to take action.
To help guide you, our team at SIS has prepared Making the XP Switch: The What, Why & How to Help Your Insurance Agency Upgrade its Operating System – a comprehensive, yet clear-cut guide to upgrading your operating system.
The document summarizes an article about enterprise systems. The article discusses both the advantages and disadvantages of implementing an enterprise system. It notes that while enterprise systems integrate data across departments, they also involve high costs, require expertise, and can be difficult to configure. The document concludes that companies considering enterprise systems should be aware of both the potential benefits of increased efficiency and revenue, as well as the risks of spending millions on a system that may need to be abandoned.
Workload automation refers to the process of automating and managing various tasks, processes, and workflows within an organization's IT infrastructure. It involves the use of specialized tools and software to schedule, execute, and monitor a wide range of activities, such as job processing, data transfers, application deployment, and report generation. Read this presentation to know more.
The document discusses the key steps involved in preparing for a successful Master Data Management (MDM) implementation. It outlines understanding what MDM is and gaining business buy-in, defining business objectives, addressing critical planning questions, and focusing on important preparation steps such as identifying data sources and assigning data stewards. Proper preparation is emphasized as essential to ensuring an MDM initiative's success.
12 tips for successful implementation of erp in a manufacturing companyMRPeasy
If you are a manufacturing company thinking about implementing a new ERP/MRP system, these quick tips will be extremely useful and will help you to avoid the common pitfalls.
ERP (enterprise resource planning) software helps organizations manage business processes and facilitates information flow across various levels of the organization. Key ERP modules focus on specific business areas like inventory, distribution, accounting, and more. ERP systems can be deployed on-premises or in the cloud. Large legacy vendors like SAP, Oracle, and Microsoft Dynamics dominate the ERP market. Recovering from a failed ERP implementation requires identifying what caused the failure, assessing the short and long-term impacts, and deciding whether to salvage the existing system or start over, while learning from past mistakes.
ICE Hrm is a Human resource management system for small and medium sized organizations. It has a rich UI built with PHP and Java Script. The system is implemented with a modular architecture which makes it extendable and customizable easily.
Demo application:
http://icehrm.gamonoid.com/demo/app/
Documentation:
http://icehrm.s3.amazonaws.com/IceHrm%20Administrator%20Manual.pdf
Installation instructions can be found here: http://icehrm-blog.gamonoid.com
If you have any questions, please ask here
https://groups.google.com/forum/#!forum/ice-hrm-support
If you found and bugs or want to make feature requests, visit:
https://bitbucket.org/thilina/icehrm-opensource/issues
For hosted iCE Hrm instances, please visit:
http://icehrm.com
2005 Energy Institute - Staffing arrangements for automated plantAndy Brazier
The document discusses staffing arrangements for automated plants. It introduces a ladder for assessing automation with rungs for technical and human factors considerations. A case study applies the ladder to an offshore operator's plant:
- The plant relies heavily on automation and operates automatically most of the time, but staff are able to switch some equipment to manual.
- Applying the ladder assessment, the plant passes the top rungs for performance during normal operations but fails the lowest rung because human factors were not fully considered in the original automation design.
- The overall assessment places the plant's automation just below the line of minimum acceptability due to gaps in considering human factors from a socio-technical perspective.
The document discusses how to systematize a business. It defines systems as standardized processes and explains that systems allow businesses to teach, manage, troubleshoot, replicate, and scale more effectively. The objectives of systemization are outlined as increasing value, competitive edge, profits, peace of mind, and staff confidence. Various system design tools are presented such as work plans, checklists, scripts, and forms. Challenges of systemization include the time required and ongoing updates needed, but benefits include increased business value and profits.
This document provides guidance on using the Time, Attendance & Scheduling (TAS) system. It covers setting up user profiles, assigning schedules using templates or custom schedules, managing attendance through clock-ins/outs and resolving issues, and other TAS functions. Key sections include getting started with the system, assigning continuous or one-time schedules, setting attendance notifications, understanding permissions and employee hierarchy, and using tools like the shift calendar and scheduling tab to manage schedules. The document serves as a manual for TAS users to understand and navigate the various features.
What Is Enterprise Asset Management Software?Stacey Kramer
You've heard of EAM software, but you're not sure what it is and how it's useful. This presentation will tell you the basics of EAM software and why thousands of organizations use it.
E-commerce Development Services- Hornet DynamicsHornet Dynamics
For any business hoping to succeed in the digital age, having a strong online presence is crucial. We offer Ecommerce Development Services that are customized according to your business requirements and client preferences, enabling you to create a dynamic, safe, and user-friendly online store.
A neural network is a machine learning program, or model, that makes decisions in a manner similar to the human brain, by using processes that mimic the way biological neurons work together to identify phenomena, weigh options and arrive at conclusions.
A Comprehensive Guide on Implementing Real-World Mobile Testing Strategies fo...kalichargn70th171
In today's fiercely competitive mobile app market, the role of the QA team is pivotal for continuous improvement and sustained success. Effective testing strategies are essential to navigate the challenges confidently and precisely. Ensuring the perfection of mobile apps before they reach end-users requires thoughtful decisions in the testing plan.
Consistent toolbox talks are critical for maintaining workplace safety, as they provide regular opportunities to address specific hazards and reinforce safe practices.
These brief, focused sessions ensure that safety is a continual conversation rather than a one-time event, which helps keep safety protocols fresh in employees' minds. Studies have shown that shorter, more frequent training sessions are more effective for retention and behavior change compared to longer, infrequent sessions.
Engaging workers regularly, toolbox talks promote a culture of safety, empower employees to voice concerns, and ultimately reduce the likelihood of accidents and injuries on site.
The traditional method of conducting safety talks with paper documents and lengthy meetings is not only time-consuming but also less effective. Manual tracking of attendance and compliance is prone to errors and inconsistencies, leading to gaps in safety communication and potential non-compliance with OSHA regulations. Switching to a digital solution like Safelyio offers significant advantages.
Safelyio automates the delivery and documentation of safety talks, ensuring consistency and accessibility. The microlearning approach breaks down complex safety protocols into manageable, bite-sized pieces, making it easier for employees to absorb and retain information.
This method minimizes disruptions to work schedules, eliminates the hassle of paperwork, and ensures that all safety communications are tracked and recorded accurately. Ultimately, using a digital platform like Safelyio enhances engagement, compliance, and overall safety performance on site. https://safelyio.com/
What to do when you have a perfect model for your software but you are constrained by an imperfect business model?
This talk explores the challenges of bringing modelling rigour to the business and strategy levels, and talking to your non-technical counterparts in the process.
E-Invoicing Implementation: A Step-by-Step Guide for Saudi Arabian CompaniesQuickdice ERP
Explore the seamless transition to e-invoicing with this comprehensive guide tailored for Saudi Arabian businesses. Navigate the process effortlessly with step-by-step instructions designed to streamline implementation and enhance efficiency.
Unlock the Secrets to Effortless Video Creation with Invideo: Your Ultimate G...The Third Creative Media
"Navigating Invideo: A Comprehensive Guide" is an essential resource for anyone looking to master Invideo, an AI-powered video creation tool. This guide provides step-by-step instructions, helpful tips, and comparisons with other AI video creators. Whether you're a beginner or an experienced video editor, you'll find valuable insights to enhance your video projects and bring your creative ideas to life.
UI5con 2024 - Bring Your Own Design SystemPeter Muessig
How do you combine the OpenUI5/SAPUI5 programming model with a design system that makes its controls available as Web Components? Since OpenUI5/SAPUI5 1.120, the framework supports the integration of any Web Components. This makes it possible, for example, to natively embed own Web Components of your design system which are created with Stencil. The integration embeds the Web Components in a way that they can be used naturally in XMLViews, like with standard UI5 controls, and can be bound with data binding. Learn how you can also make use of the Web Components base class in OpenUI5/SAPUI5 to also integrate your Web Components and get inspired by the solution to generate a custom UI5 library providing the Web Components control wrappers for the native ones.
INTRODUCTION TO AI CLASSICAL THEORY TARGETED EXAMPLESanfaltahir1010
Image: Include an image that represents the concept of precision, such as a AI helix or a futuristic healthcare
setting.
Objective: Provide a foundational understanding of precision medicine and its departure from traditional
approaches
Role of theory: Discuss how genomics, the study of an organism's complete set of AI ,
plays a crucial role in precision medicine.
Customizing treatment plans: Highlight how genetic information is used to customize
treatment plans based on an individual's genetic makeup.
Examples: Provide real-world examples of successful application of AI such as genetic
therapies or targeted treatments.
Importance of molecular diagnostics: Explain the role of molecular diagnostics in identifying
molecular and genetic markers associated with diseases.
Biomarker testing: Showcase how biomarker testing aids in creating personalized treatment plans.
Content:
• Ethical issues: Examine ethical concerns related to precision medicine, such as privacy, consent, and
potential misuse of genetic information.
• Regulations and guidelines: Present examples of ethical guidelines and regulations in place to safeguard
patient rights.
• Visuals: Include images or icons representing ethical considerations.
Content:
• Ethical issues: Examine ethical concerns related to precision medicine, such as privacy, consent, and
potential misuse of genetic information.
• Regulations and guidelines: Present examples of ethical guidelines and regulations in place to safeguard
patient rights.
• Visuals: Include images or icons representing ethical considerations.
Content:
• Ethical issues: Examine ethical concerns related to precision medicine, such as privacy, consent, and
potential misuse of genetic information.
• Regulations and guidelines: Present examples of ethical guidelines and regulations in place to safeguard
patient rights.
• Visuals: Include images or icons representing ethical considerations.
Real-world case study: Present a detailed case study showcasing the success of precision
medicine in a specific medical scenario.
Patient's journey: Discuss the patient's journey, treatment plan, and outcomes.
Impact: Emphasize the transformative effect of precision medicine on the individual's
health.
Objective: Ground the presentation in a real-world example, highlighting the practical
application and success of precision medicine.
Data challenges: Address the challenges associated with managing large sets of patient data in precision
medicine.
Technological solutions: Discuss technological innovations and solutions for handling and analyzing vast
datasets.
Visuals: Include graphics representing data management challenges and technological solutions.
Objective: Acknowledge the data-related challenges in precision medicine and highlight innovative solutions.
Data challenges: Address the challenges associated with managing large sets of patient data in precision
medicine.
Technological solutions: Discuss technological innovations and solutions
Enhanced Screen Flows UI/UX using SLDS with Tom KittPeter Caitens
Join us for an engaging session led by Flow Champion, Tom Kitt. This session will dive into a technique of enhancing the user interfaces and user experiences within Screen Flows using the Salesforce Lightning Design System (SLDS). This technique uses Native functionality, with No Apex Code, No Custom Components and No Managed Packages required.
Measures in SQL (SIGMOD 2024, Santiago, Chile)Julian Hyde
SQL has attained widespread adoption, but Business Intelligence tools still use their own higher level languages based upon a multidimensional paradigm. Composable calculations are what is missing from SQL, and we propose a new kind of column, called a measure, that attaches a calculation to a table. Like regular tables, tables with measures are composable and closed when used in queries.
SQL-with-measures has the power, conciseness and reusability of multidimensional languages but retains SQL semantics. Measure invocations can be expanded in place to simple, clear SQL.
To define the evaluation semantics for measures, we introduce context-sensitive expressions (a way to evaluate multidimensional expressions that is consistent with existing SQL semantics), a concept called evaluation context, and several operations for setting and modifying the evaluation context.
A talk at SIGMOD, June 9–15, 2024, Santiago, Chile
Authors: Julian Hyde (Google) and John Fremlin (Google)
https://doi.org/10.1145/3626246.3653374
Most important New features of Oracle 23c for DBAs and Developers. You can get more idea from my youtube channel video from https://youtu.be/XvL5WtaC20A
Preparing Non - Technical Founders for Engaging a Tech AgencyISH Technologies
Preparing non-technical founders before engaging a tech agency is crucial for the success of their projects. It starts with clearly defining their vision and goals, conducting thorough market research, and gaining a basic understanding of relevant technologies. Setting realistic expectations and preparing a detailed project brief are essential steps. Founders should select a tech agency with a proven track record and establish clear communication channels. Additionally, addressing legal and contractual considerations and planning for post-launch support are vital to ensure a smooth and successful collaboration. This preparation empowers non-technical founders to effectively communicate their needs and work seamlessly with their chosen tech agency.Visit our site to get more details about this. Contact us today www.ishtechnologies.com.au
Why Apache Kafka Clusters Are Like Galaxies (And Other Cosmic Kafka Quandarie...Paul Brebner
Closing talk for the Performance Engineering track at Community Over Code EU (Bratislava, Slovakia, June 5 2024) https://eu.communityovercode.org/sessions/2024/why-apache-kafka-clusters-are-like-galaxies-and-other-cosmic-kafka-quandaries-explored/ Instaclustr (now part of NetApp) manages 100s of Apache Kafka clusters of many different sizes, for a variety of use cases and customers. For the last 7 years I’ve been focused outwardly on exploring Kafka application development challenges, but recently I decided to look inward and see what I could discover about the performance, scalability and resource characteristics of the Kafka clusters themselves. Using a suite of Performance Engineering techniques, I will reveal some surprising discoveries about cosmic Kafka mysteries in our data centres, related to: cluster sizes and distribution (using Zipf’s Law), horizontal vs. vertical scalability, and predicting Kafka performance using metrics, modelling and regression techniques. These insights are relevant to Kafka developers and operators.
Using Query Store in Azure PostgreSQL to Understand Query PerformanceGrant Fritchey
Microsoft has added an excellent new extension in PostgreSQL on their Azure Platform. This session, presented at Posette 2024, covers what Query Store is and the types of information you can get out of it.
14. Field Description
Name Name of the training session
Course Select the trainign course
Scheduled Time When this training session is scheduled
Assignment Due
Date
If the training session has an associated assignment, the due date
for that
Delivery
Method
Whether the training session is delivered in a class room, online or
its a sel study session
Attendance
Type
- Assign = Only admins/mangers can assign the session to
employees - Sign Up = Session is open for employees to sign up
Attachment An attachment with other resources for the session
Training
Certificate
Required
If Yes, employees have to attach a proof of completion (such as
certificate) before marking the training session as completed
Subscribing to a Training Session
1. An employee can subscribe to a training session via Training => Training module.
2. Go to "All Training Sessions" tab
3. Click on subscribe button
![Subscribing to a Training Session] (https://icehrm.s3.amazonaws.com/images/blog-
images/employee_training_sessions.png)
Attendance Type
Employees can only subscribe to training sessions having Attendance Type set to "Sign Up"
Completing a Training Session
Once an employee participated in a training session he/she can mark the training as
completed via Training=>Training=>My Training Sessions tab. Once this is done a
notification will be sent to the supervisor to approve the training session.
Proof of Completion
Training Module
14