ENGR. IBRAHIM AHMED. MNSE
•Download as DOCX, PDF•
0 likes•92 views
Ibrahim Ahmed is a technical engineer seeking an innovative work environment where hard work and diligence are rewarded. He has over 10 years of experience in technical engineering roles, including as a technical engineer for NTA-STARTV Network Ltd from 2010 to present where his responsibilities include signal uplink and downlink, satellite station tracking and maintenance of transmission equipment. He also has experience as a transmission engineer for Oil Option Services Limited from 2008 to present where he performed tasks such as troubleshooting transmission networks, installing transmission links and maintaining records. He holds a Bachelor of Engineering degree in Electrical/Computer Engineering.
Report
Share
Report
Share
![OIL OPTION SERVICES LIMITED, 2008
17, Akande Adebeshin Street,
Mafoluku, Oshodi Lagos.
TransmissionEngineer(ETISALAT PROJECT, ONDO OSUN).
Execute Troubleshooting and maintenance of Alcatel Evolium NEs (Running on B10 &
B11 SW Version) via LMT & OMC-R (A1353 & A9153).
Execute Hardware & Software configuration of Evolium BTS A9100
Commissioning & maintenance of Microwave Transmission Link [AWY 9400, MXC
9500 (HARRIS-STRATEX ECLIPSE), MPR 9500].
E1 Capacity increase of LX/UX and AWY PDH Access Radios.
Site Integration including Cross-connectionto the BSC.
Planning and execution of cutovers on Microwave links.
Perform Routine O & M procedures for Transmission Networks.
Installation of Batteries as Back up to the electricity supply to BTS sites.
Power Termination on DB and RBS.
Installation and maintenance of radio frequency antenna e.g. Katherine, Andrew.
Installation and maintenance of sectorial (BTS) antenna (900GSM & 1800DCS).
Termination of RF feeders.
Installation of Diplexers.
Troubleshooting of RF installations.
Carrying out of VSWR and DTF Test using VSWR Tester.
Proficient use of VSWR tester, compass and inclinometer
Maintenance of comprehensive records on Transmission links, RBS sites equipments and
spares for all sites within my assigned area.
Implementation and supervision of network Transmission & RBS expansion/upgrade.
React to emergency faults and ensure that all faults are rectified within the stipulated
MTTR.
National YouthService Corps (NYSC)
(As Instructor in computer training institute) (2007-2008)
On Microsoftoffice
Industrial Training (IT) Warri Refining and Petrochemical Company (WRPC)
A subsidiary of (NNPC) in Power Plant & Utilities (as external operator) (2005)
Operation and maintenance of Gas Turbine, Steam Turbine, Boiler, Compressors, AC and
DC motors.](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Seymour Gordon Resume
Seymour Gordon has over 10 years of experience as a tower technician working for various companies maintaining telecom equipment on cell towers. He is currently a Tower Technician IV for SAC Wireless where he leads installation and maintenance of equipment for Sprint, T-Mobile, and AT&T networks. Gordon has extensive experience installing, maintaining, and troubleshooting a wide range of telecom equipment including antennas, microwave dishes, fiber optic cable, and radio base stations. He is pursuing his journeyman electrician licensure and holds various technical certifications.
Competencies
The document lists the competencies and skills of an individual including: in-depth knowledge of Ericsson mobile soft-switch solutions and media gateways; excellent knowledge of Ericsson MSC Server Blade Clusters and AXE10/AXE810 switches; experience preparing and implementing design tests for network integration and configuration projects; coordinating core network expansion projects; troubleshooting faults in the MSC, MSS and MGW; generating performance reports; and managing operations and maintenance of Ericsson soft switches including configurations, upgrades, and expansions.
Alignsat 7.3m esa
Alignsat, a leading manufacturer of VSAT antenna, Earth station antenna, TVRO antenna, Flyaway antenna, Maritime antenna, Vehicle mounted antenna, Antenna controller, Antenna tracking receiver, Satcom on the move etc. with installation and commissioning test, training services. Also customized products are welcomed.
Meltek Infosystems BSX 2010 Presentation
Meltek infosystems is established by a term of experienced engineers in the year of 2000. The company provided complete technical solution for any type of satellite communication application. The services provided by the company include supply, installation and commissioning of Earth Station Antenna. The company also takes up services like installation, servicing and maintenance of satellite-based equipment of any make. A cluster of well-trained experienced and highly qualified team of engineers manages the total activity in above fields. Meltek infosystems has its hub station positioned at Pune for providing the test facilities for inspection and training towards operations, repairs and maintenance of entire earth station electronics.
Mohammad Alsaleem cv rf
Mohammad Al-Saleem is a telecommunications professional with over 7 years of experience in network consultation, design, optimization, and project management. He has expertise in 3G/2G technologies and has worked with Ericsson and Orange Jordan and currently works with Korektel in Iraq, optimizing their 3G network performance and implementing new features.
Asif Naveed Resume
Asif Naveed is a telecom engineer from Pakistan currently working for Seder Group of Communication in Saudi Arabia, with over 10 years of experience in telecommunications including roles at Motorola, Wateen Telecom Pakistan, and other companies installing and troubleshooting mobile network equipment. He has skills in microwave link installation, site surveys, BTS installation and configuration, and software like Microsoft Office, and holds a B.Tech degree in electrical engineering as well as CCNA certification.
Wavelink Presentation(Updated)
This document describes a team of experienced telecommunication engineers that specializes in installing and commissioning various mobile wireless network equipment including GSM base stations, UMTS NodeBs, microwave links, and WiMax base stations. The team aims to work with companies to expand network capacity and coverage and ensure high quality. They provide certificates demonstrating expertise in installing and testing equipment from manufacturers like Ericsson, Motorola, Huawei, Nokia, and Cisco.
waqas cv
Waqas Ahmad Naveed is a transmission engineer currently working in Saudi Arabia with over 7 years of experience in telecommunications. He has extensive technical skills in Alcatel-Lucent, Huawei, and Nokia Siemens Networks transmission equipment. His work experience includes roles as a team leader and technical support engineer in Saudi Arabia and Pakistan, where he has implemented, tested, and troubleshot fiber optic networks. He holds a Bachelor's degree in Electrical Technology and technical certifications in SDH, DWDM, and other telecom systems.
Recommended
Seymour Gordon Resume
Seymour Gordon has over 10 years of experience as a tower technician working for various companies maintaining telecom equipment on cell towers. He is currently a Tower Technician IV for SAC Wireless where he leads installation and maintenance of equipment for Sprint, T-Mobile, and AT&T networks. Gordon has extensive experience installing, maintaining, and troubleshooting a wide range of telecom equipment including antennas, microwave dishes, fiber optic cable, and radio base stations. He is pursuing his journeyman electrician licensure and holds various technical certifications.
Competencies
The document lists the competencies and skills of an individual including: in-depth knowledge of Ericsson mobile soft-switch solutions and media gateways; excellent knowledge of Ericsson MSC Server Blade Clusters and AXE10/AXE810 switches; experience preparing and implementing design tests for network integration and configuration projects; coordinating core network expansion projects; troubleshooting faults in the MSC, MSS and MGW; generating performance reports; and managing operations and maintenance of Ericsson soft switches including configurations, upgrades, and expansions.
Alignsat 7.3m esa
Alignsat, a leading manufacturer of VSAT antenna, Earth station antenna, TVRO antenna, Flyaway antenna, Maritime antenna, Vehicle mounted antenna, Antenna controller, Antenna tracking receiver, Satcom on the move etc. with installation and commissioning test, training services. Also customized products are welcomed.
Meltek Infosystems BSX 2010 Presentation
Meltek infosystems is established by a term of experienced engineers in the year of 2000. The company provided complete technical solution for any type of satellite communication application. The services provided by the company include supply, installation and commissioning of Earth Station Antenna. The company also takes up services like installation, servicing and maintenance of satellite-based equipment of any make. A cluster of well-trained experienced and highly qualified team of engineers manages the total activity in above fields. Meltek infosystems has its hub station positioned at Pune for providing the test facilities for inspection and training towards operations, repairs and maintenance of entire earth station electronics.
Mohammad Alsaleem cv rf
Mohammad Al-Saleem is a telecommunications professional with over 7 years of experience in network consultation, design, optimization, and project management. He has expertise in 3G/2G technologies and has worked with Ericsson and Orange Jordan and currently works with Korektel in Iraq, optimizing their 3G network performance and implementing new features.
Asif Naveed Resume
Asif Naveed is a telecom engineer from Pakistan currently working for Seder Group of Communication in Saudi Arabia, with over 10 years of experience in telecommunications including roles at Motorola, Wateen Telecom Pakistan, and other companies installing and troubleshooting mobile network equipment. He has skills in microwave link installation, site surveys, BTS installation and configuration, and software like Microsoft Office, and holds a B.Tech degree in electrical engineering as well as CCNA certification.
Wavelink Presentation(Updated)
This document describes a team of experienced telecommunication engineers that specializes in installing and commissioning various mobile wireless network equipment including GSM base stations, UMTS NodeBs, microwave links, and WiMax base stations. The team aims to work with companies to expand network capacity and coverage and ensure high quality. They provide certificates demonstrating expertise in installing and testing equipment from manufacturers like Ericsson, Motorola, Huawei, Nokia, and Cisco.
waqas cv
Waqas Ahmad Naveed is a transmission engineer currently working in Saudi Arabia with over 7 years of experience in telecommunications. He has extensive technical skills in Alcatel-Lucent, Huawei, and Nokia Siemens Networks transmission equipment. His work experience includes roles as a team leader and technical support engineer in Saudi Arabia and Pakistan, where he has implemented, tested, and troubleshot fiber optic networks. He holds a Bachelor's degree in Electrical Technology and technical certifications in SDH, DWDM, and other telecom systems.
latest2
Ahmed Hedib Dessouki is a telecom expert with over 15 years of experience in telecommunications. He has extensive technical skills in areas such as risk assessment, fire safety, CCTV, data networking, telephone network design and implementation. He has worked on projects for companies such as Ericsson, ZTE, SYSTEL and Motorola in roles such as telecom implementation supervisor and BSS engineer. He is proficient in both Arabic and English.
BridgeX_SURVEY_solutions
The RTK Bridge-X is a mobile device that receives real-time kinematic (RTK) corrections over a cellular network and rebroadcasts them to rovers via radio. This allows surveyors to access corrections in areas with limited cellular coverage. The Bridge-X provides reliable corrections with less interference than traditional methods. It offers flexibility to work from vehicles and minimize setup time. The device can also host corrections from a local base station and share them over the internet or broadcast via radio when cellular is unavailable.
ACE Balmoria (11) (1) (1) (2)
The document provides a summary of qualifications and work experience for Ace V. Balmoria, including experience installing various mobile network equipment such as microwave radios, antennas, and base station equipment for companies in the Philippines and Qatar, as well as trainings on mobile network technologies, products, and safety. Balmoria has over 15 years of experience in telecommunications installation, commissioning, and radio frequency work.
Maxtena Product Catalog 2014 Antenna Solutions
Maxtena provides antenna products and consulting services for businesses, governments, and organizations worldwide. Their product catalog includes helix, microstrip, and custom antenna solutions for GPS, GLONASS, Iridium, LTE, and other wireless applications. Maxtena offers feasibility studies, antenna testing in an anechoic chamber, and prototyping services to support antenna integration projects.
Pushing 100G to the packet edge
The ADVA FSP 150-XG400 Series is the industry’s most compact demarcation and aggregation technology. It brings cost-effective MEF 3.0-certified 100Gbit/s services to the network edge, enabling businesses and mobile network operators to easily scale their metro networks and tackle booming bandwidth demand.
Abdallah Al Sagheir Cv
1) Abdallah Mohammad Al Sagheir is an Egyptian national seeking a position utilizing his experience in deploying and managing wireless transmission networks including 2G, 2.5G, 3G and optical transmission equipment.
2) He has a bachelor's degree in communication and electronics engineering and certifications in wireless technologies.
3) His work experience includes installation, operation and maintenance of wireless networks for various companies, performing site surveys, and connecting sites for data, voice and video transmission.
Gary S SelfResume
Gary Shawn Self is a motivated cellular field technician with over 16 years of experience in the telecommunications industry seeking a position that utilizes his expertise in areas such as 4G LTE migration, legacy network equipment maintenance from vendors like Ericsson, Samsung, and Cisco, and technical skills like networking, software use, and fiber optic testing. He has worked as a field technician for Ericsson Services and IPCS Wireless where he installed, maintained, and upgraded a variety of wireless network equipment across Illinois and Iowa. Self also served in the US Army as a Military Police Officer with a background in tactical radio deployments and security work.
Ensemble Fiber Director
ADVA's Ensemble Fiber Director GIS software, which is a perfect marriage with the ALM for 24x7 live, in-line, fiber monitoring. The software immediately displays errors in your fiber infrastructure on a map. This allows for quick investigation and repair times.
jairus-hands-on-technical-experience
Jairus K Ndegwa has extensive experience in network planning, optimization, and installation across various technologies including GSM, WiMax, base transmission stations, microwave links, and multiplexers. He has worked on projects for clients such as Safaricom, Bharti Airtel, Essar YU, Orange, and Alcatel. His responsibilities have included pre-installation surveys, design, implementation, commissioning, reporting, and maintenance. He is competent in tools such as Ericsson TEMS, Actix, MapInfo, and Site Master, as well as equipment from Ericsson, Andrews, Grentech, and Alcatel.
Seamless growth from 1G to 10G services with the ADVA FSP 150-XG108 Series
Our new FSP 150-XG108 Series is a compact, low-power edge demarcation solution that enables network operators to easily and affordably migrate from 1Gbit/s to 10Gbit/s MEF 3.0 services. Featuring zero-touch provisioning and 5G timing capabilities, the solution is ideal for growing network capacity while reducing footprint, power and cost.
Increasing the usable Ka band spectrum for satellite communications--the CoRa...
Presentation from the UK Spectrum Policy Forum Plenary meeting on 14th July 2015.
Guest talk by Prof. Barry Evans, The Alec Harley Reeves Chair in Information Systems Engineering, CCSR, University of Surrey
Quintel 8 foot 8 port press release feb 2013
Quintel has released a new 8-foot, 8-port quadband slimline antenna for wireless networks in North America. The antenna allows operators to combine four frequency bands (700MHz, 850MHz, 1900MHz, 2100MHz) onto one antenna. Each band and polarization can be independently tilted. This will help operators upgrade existing cellular and PCS sites to support LTE in 700MHz and AWS bands using a single replacement antenna. The new antenna provides more flexibility and optimizes networks with lower costs.
400G High Speed interconnect product guide
The document provides information about 400G and 100G optical transceivers and components from MITS Component & System Corp. It includes specifications for various QSFP-DD, QSFP56, and QSFP28 transceivers and direct attach cables that support data rates up to 400Gbps. It also lists MPO and fiber optic patch cords, loopback modules, and other optical connectivity products.
Quintel 8 Port Press Release Feb2012 Final Copy
Quintel has developed the world's first 8-Port/Quadband slimline antenna that allows operators to combine four major frequency bands in North America onto a single antenna. The antenna provides independent tilt control for each band and polarization, enabling applications like spatial diversity and high power PIM3 mitigation. It allows operators to optimize coverage and capacity while reducing infrastructure costs.
ajay
This document is a resume for Ajay Verma, who has over 2 years of experience in the telecom sector installing and commissioning microwave and BTS equipment. He is currently working as a Field Maintenance Engineer for Ericsson India Private Limited on various 4G, 3G, and 2G network integration projects. Prior to this, he worked for AirNet Services and Ariel Telecom on BTS installation, commissioning, and site integration projects. He holds a B.Tech in Electronics and Communication and is seeking challenging assignments to further his career in the telecom sector.
Mohammed Asif Mohammed Mustafa
Mohammed Asif has over 8 years of experience as a telecom implementation engineer in Saudi Arabia. He has worked with various mobile operators and vendors, including Zain, STC, Mobily, Huawei, Alcatel, and NSN. His responsibilities have included installing, integrating, and troubleshooting 2G, 3G, 4G, and microwave transmission equipment. He also has experience with work permits for installations at Aramco plants.
AHCENE RESUME FINAL
Ahcene Boudjema has over 15 years of experience as a GSM network technician and machine operator. He has extensive experience commissioning and installing telecom equipment for GSM networks in Algeria, including rectifiers, power supplies, batteries, distribution frames, and base transceiver stations. Currently, he works as a machine operator at Spx Cooling Technologies in Olathe, Kansas, where he operates precision machinery and ensures high quality production. He is proficient in GSM, DCS, transmission systems, radio links, and software like B7, B8, B9, and B10.
U.S - Turkey Smart Grid Workshop - Mehmet Karadeniz
mehmet.karadeniz@aydem.com
Phone: +90 258 444 18 86
Fax: +90 258 444 18 87
Address: Aydem Mahallesi 1516. Sokak No:16 Denizli/TURKEY
fehmi doğan (CV)
This document contains a resume for Fehmi Dogan that outlines his personal and professional experience working in telecommunications. It details his educational background in electrical engineering, work history managing operations and maintenance for Turkcell and Siemens, experience owning a consulting business, and a director role at Superonline. His work included installing and maintaining various telecom infrastructure equipment across Turkey and other countries. He has extensive training and skills in radio networks, transmission systems, and quality management.
Timing in the pits: GNSS in challenging locations
This document discusses challenges with using GPS for timing synchronization in urban and indoor environments and proposes alternatives. It notes that roof installations can be very costly and alternatives are needed. It then describes an integrated GPS antenna and PTP grandmaster that provides an easy and cost-effective indoor or outdoor solution. For challenging urban canyon and indoor situations, it recommends optimized GPS antennas, location selection, and network backup to complement local timing sources.
Digiray Complete Documentation Set
The document discusses the history and development of artificial intelligence over the past 70 years. It outlines some of the key milestones in AI research from the early work in the 1950s to modern advances in deep learning. While progress has been significant, fully general human-level AI remains an ongoing challenge that researchers continue working to achieve.
همزیستی نیروگاه های سیکل ترکیبی مقیاس بزرگ و گلخانه
در این سخنرانی تلاش شد تا گلخانه ها را به عنوان یکی از طرحههای مفید برای نیروگاههای بزرگ کشور اعلام نموده ، همزیستی ایده آل ایندو بررسی شود .
More Related Content
What's hot
latest2
Ahmed Hedib Dessouki is a telecom expert with over 15 years of experience in telecommunications. He has extensive technical skills in areas such as risk assessment, fire safety, CCTV, data networking, telephone network design and implementation. He has worked on projects for companies such as Ericsson, ZTE, SYSTEL and Motorola in roles such as telecom implementation supervisor and BSS engineer. He is proficient in both Arabic and English.
BridgeX_SURVEY_solutions
The RTK Bridge-X is a mobile device that receives real-time kinematic (RTK) corrections over a cellular network and rebroadcasts them to rovers via radio. This allows surveyors to access corrections in areas with limited cellular coverage. The Bridge-X provides reliable corrections with less interference than traditional methods. It offers flexibility to work from vehicles and minimize setup time. The device can also host corrections from a local base station and share them over the internet or broadcast via radio when cellular is unavailable.
ACE Balmoria (11) (1) (1) (2)
The document provides a summary of qualifications and work experience for Ace V. Balmoria, including experience installing various mobile network equipment such as microwave radios, antennas, and base station equipment for companies in the Philippines and Qatar, as well as trainings on mobile network technologies, products, and safety. Balmoria has over 15 years of experience in telecommunications installation, commissioning, and radio frequency work.
Maxtena Product Catalog 2014 Antenna Solutions
Maxtena provides antenna products and consulting services for businesses, governments, and organizations worldwide. Their product catalog includes helix, microstrip, and custom antenna solutions for GPS, GLONASS, Iridium, LTE, and other wireless applications. Maxtena offers feasibility studies, antenna testing in an anechoic chamber, and prototyping services to support antenna integration projects.
Pushing 100G to the packet edge
The ADVA FSP 150-XG400 Series is the industry’s most compact demarcation and aggregation technology. It brings cost-effective MEF 3.0-certified 100Gbit/s services to the network edge, enabling businesses and mobile network operators to easily scale their metro networks and tackle booming bandwidth demand.
Abdallah Al Sagheir Cv
1) Abdallah Mohammad Al Sagheir is an Egyptian national seeking a position utilizing his experience in deploying and managing wireless transmission networks including 2G, 2.5G, 3G and optical transmission equipment.
2) He has a bachelor's degree in communication and electronics engineering and certifications in wireless technologies.
3) His work experience includes installation, operation and maintenance of wireless networks for various companies, performing site surveys, and connecting sites for data, voice and video transmission.
Gary S SelfResume
Gary Shawn Self is a motivated cellular field technician with over 16 years of experience in the telecommunications industry seeking a position that utilizes his expertise in areas such as 4G LTE migration, legacy network equipment maintenance from vendors like Ericsson, Samsung, and Cisco, and technical skills like networking, software use, and fiber optic testing. He has worked as a field technician for Ericsson Services and IPCS Wireless where he installed, maintained, and upgraded a variety of wireless network equipment across Illinois and Iowa. Self also served in the US Army as a Military Police Officer with a background in tactical radio deployments and security work.
Ensemble Fiber Director
ADVA's Ensemble Fiber Director GIS software, which is a perfect marriage with the ALM for 24x7 live, in-line, fiber monitoring. The software immediately displays errors in your fiber infrastructure on a map. This allows for quick investigation and repair times.
jairus-hands-on-technical-experience
Jairus K Ndegwa has extensive experience in network planning, optimization, and installation across various technologies including GSM, WiMax, base transmission stations, microwave links, and multiplexers. He has worked on projects for clients such as Safaricom, Bharti Airtel, Essar YU, Orange, and Alcatel. His responsibilities have included pre-installation surveys, design, implementation, commissioning, reporting, and maintenance. He is competent in tools such as Ericsson TEMS, Actix, MapInfo, and Site Master, as well as equipment from Ericsson, Andrews, Grentech, and Alcatel.
Seamless growth from 1G to 10G services with the ADVA FSP 150-XG108 Series
Our new FSP 150-XG108 Series is a compact, low-power edge demarcation solution that enables network operators to easily and affordably migrate from 1Gbit/s to 10Gbit/s MEF 3.0 services. Featuring zero-touch provisioning and 5G timing capabilities, the solution is ideal for growing network capacity while reducing footprint, power and cost.
Increasing the usable Ka band spectrum for satellite communications--the CoRa...
Presentation from the UK Spectrum Policy Forum Plenary meeting on 14th July 2015.
Guest talk by Prof. Barry Evans, The Alec Harley Reeves Chair in Information Systems Engineering, CCSR, University of Surrey
Quintel 8 foot 8 port press release feb 2013
Quintel has released a new 8-foot, 8-port quadband slimline antenna for wireless networks in North America. The antenna allows operators to combine four frequency bands (700MHz, 850MHz, 1900MHz, 2100MHz) onto one antenna. Each band and polarization can be independently tilted. This will help operators upgrade existing cellular and PCS sites to support LTE in 700MHz and AWS bands using a single replacement antenna. The new antenna provides more flexibility and optimizes networks with lower costs.
400G High Speed interconnect product guide
The document provides information about 400G and 100G optical transceivers and components from MITS Component & System Corp. It includes specifications for various QSFP-DD, QSFP56, and QSFP28 transceivers and direct attach cables that support data rates up to 400Gbps. It also lists MPO and fiber optic patch cords, loopback modules, and other optical connectivity products.
Quintel 8 Port Press Release Feb2012 Final Copy
Quintel has developed the world's first 8-Port/Quadband slimline antenna that allows operators to combine four major frequency bands in North America onto a single antenna. The antenna provides independent tilt control for each band and polarization, enabling applications like spatial diversity and high power PIM3 mitigation. It allows operators to optimize coverage and capacity while reducing infrastructure costs.
ajay
This document is a resume for Ajay Verma, who has over 2 years of experience in the telecom sector installing and commissioning microwave and BTS equipment. He is currently working as a Field Maintenance Engineer for Ericsson India Private Limited on various 4G, 3G, and 2G network integration projects. Prior to this, he worked for AirNet Services and Ariel Telecom on BTS installation, commissioning, and site integration projects. He holds a B.Tech in Electronics and Communication and is seeking challenging assignments to further his career in the telecom sector.
Mohammed Asif Mohammed Mustafa
Mohammed Asif has over 8 years of experience as a telecom implementation engineer in Saudi Arabia. He has worked with various mobile operators and vendors, including Zain, STC, Mobily, Huawei, Alcatel, and NSN. His responsibilities have included installing, integrating, and troubleshooting 2G, 3G, 4G, and microwave transmission equipment. He also has experience with work permits for installations at Aramco plants.
AHCENE RESUME FINAL
Ahcene Boudjema has over 15 years of experience as a GSM network technician and machine operator. He has extensive experience commissioning and installing telecom equipment for GSM networks in Algeria, including rectifiers, power supplies, batteries, distribution frames, and base transceiver stations. Currently, he works as a machine operator at Spx Cooling Technologies in Olathe, Kansas, where he operates precision machinery and ensures high quality production. He is proficient in GSM, DCS, transmission systems, radio links, and software like B7, B8, B9, and B10.
U.S - Turkey Smart Grid Workshop - Mehmet Karadeniz
mehmet.karadeniz@aydem.com
Phone: +90 258 444 18 86
Fax: +90 258 444 18 87
Address: Aydem Mahallesi 1516. Sokak No:16 Denizli/TURKEY
fehmi doğan (CV)
This document contains a resume for Fehmi Dogan that outlines his personal and professional experience working in telecommunications. It details his educational background in electrical engineering, work history managing operations and maintenance for Turkcell and Siemens, experience owning a consulting business, and a director role at Superonline. His work included installing and maintaining various telecom infrastructure equipment across Turkey and other countries. He has extensive training and skills in radio networks, transmission systems, and quality management.
Timing in the pits: GNSS in challenging locations
This document discusses challenges with using GPS for timing synchronization in urban and indoor environments and proposes alternatives. It notes that roof installations can be very costly and alternatives are needed. It then describes an integrated GPS antenna and PTP grandmaster that provides an easy and cost-effective indoor or outdoor solution. For challenging urban canyon and indoor situations, it recommends optimized GPS antennas, location selection, and network backup to complement local timing sources.
What's hot (20)
Seamless growth from 1G to 10G services with the ADVA FSP 150-XG108 Series
Seamless growth from 1G to 10G services with the ADVA FSP 150-XG108 Series
Increasing the usable Ka band spectrum for satellite communications--the CoRa...
Increasing the usable Ka band spectrum for satellite communications--the CoRa...
U.S - Turkey Smart Grid Workshop - Mehmet Karadeniz
U.S - Turkey Smart Grid Workshop - Mehmet Karadeniz
Viewers also liked
Digiray Complete Documentation Set
The document discusses the history and development of artificial intelligence over the past 70 years. It outlines some of the key milestones in AI research from the early work in the 1950s to modern advances in deep learning. While progress has been significant, fully general human-level AI remains an ongoing challenge that researchers continue working to achieve.
همزیستی نیروگاه های سیکل ترکیبی مقیاس بزرگ و گلخانه
در این سخنرانی تلاش شد تا گلخانه ها را به عنوان یکی از طرحههای مفید برای نیروگاههای بزرگ کشور اعلام نموده ، همزیستی ایده آل ایندو بررسی شود .
Journey of cev
Dear All,
Greetings of the day!!
Here i attach Summery of CEV Engineering valuable Activities during January 2013 to till now ,
regards,
Conceptos geometricos
Este documento define y describe varios conceptos geométricos fundamentales como el espacio, ángulo central, diámetro, triángulo rectángulo, cuadrilátero, polígono convexo, círculo, esfera y área. El espacio es el conjunto universo de la geometría que contiene todos los demás elementos geométricos. Un ángulo central tiene su vértice en el centro de una circunferencia, y un diámetro une dos puntos de una circunferencia pasando por su centro.
Presentación calidad en el servicio
Este documento describe los aspectos clave de la calidad en el servicio. Explica que el momento de la verdad es cuando un cliente interactúa con un producto o servicio y forma una opinión sobre su calidad. También destaca la importancia de satisfacer al cliente, escucharlo e informarlo adecuadamente. Además, enfatiza que la calidad del servicio depende de la calidad personal del personal a través de un alto espíritu de servicio y sentido de urgencia.
A PROJECT REPORT ON
This document is a project report on stock trading in the Indian stock exchange. It discusses the benefits of long-term investing in stocks, how to analyze companies using fundamental and technical analysis, and how to track market movements without analyzing each share price individually. The report analyzes specific companies like Tata Motors through ratios and valuation models. It also provides technical analyses of banks like SBI using indicators like RSI, MACD, SMA and EMA to determine entry and exit points. The conclusion suggests investors must understand how stocks trade and use analysis along with expert advice to time their investments well in the volatile stock market.
Exitus 2016 - brief (september)
This investment brief summarizes an opportunity to invest in an outdoor recreation company developing an innovative tailgate barbecue grill. The company was founded by outdoor enthusiasts to engineer high-quality outdoor products. Their initial flagship product, the Exitus Tailgate Barbecue, is a portable gas grill that installs in the tailgate of pickup trucks, allowing for convenient grilling on the go. The company is seeking $750,000 to fund commercialization and marketing of the product. They have a prototype and plan to launch sales in key western US territories, targeting the large market of outdoor enthusiasts who own pickup trucks.
Emani retailing training
The document provides guidance for Emani representatives on properly representing the Emani cosmetics brand through knowing the brand story and values, demonstrating products effectively, and selling products to clients. It emphasizes the importance of consistency in messaging about the brand's focus on natural and environmentally friendly products while making clients feel good. Representatives are encouraged to find opportunities to introduce every client to Emani's products through demonstrations and offers to purchase.
Mobility
Mobility management allows businesses to reach customers anytime, anywhere through mobile commerce technologies. As smartphone and mobile internet usage increases globally, m-commerce sales are rising with a 101% increase in sales from the first quarter of 2013 to 2014. Customers also appreciate the flexibility to access online services through their mobile devices. Finally, mobile-friendly websites are important for driving more customers, as 61% of mobile visitors will quickly leave unfriendly sites.
Actividad inicial grupo2071027
Este documento presenta tres propuestas de diseño de lámparas realizadas por estudiantes de Diseño Industrial y de Servicios de la Universidad Nacional Abierta y a Distancia de Colombia. Incluye una ficha técnica de cada propuesta que describe sus características y una evaluación de cada diseño usando el marco de análisis RGV. El objetivo es identificar las necesidades del cliente y desarrollar una propuesta de rediseño que satisfaga el mercado.
Www.braddock.net
This document summarizes the services of criminal defense attorney Christopher Braddock. It states that he has over 20 years of experience defending clients against a wide range of state and federal criminal charges in Colorado. These include sex crimes, drug crimes, DUIs, assaults, and white collar crimes. It emphasizes that being charged with a crime can seriously damage one's reputation and freedom, so it is important to hire an experienced criminal defense attorney like Mr. Braddock to investigate the case and create a strong defense strategy. Contact information is provided for interested potential clients.
Viewers also liked (11)
همزیستی نیروگاه های سیکل ترکیبی مقیاس بزرگ و گلخانه
همزیستی نیروگاه های سیکل ترکیبی مقیاس بزرگ و گلخانه
Similar to ENGR. IBRAHIM AHMED. MNSE
MAZHAR NEW CV with Huawei,ZTE,LCC KSA 3G
Mazhar Ali is seeking a job in a dynamic organization where he can utilize his skills in electronics engineering and over 15 years of experience in telecommunications. He has worked for several telecom companies in Pakistan and Saudi Arabia, holding roles such as telecom engineer and site implementation engineer. His experience includes installation, commissioning, and maintenance of equipment from vendors such as Huawei, ZTE, Ericsson, and Alcatel. He is proficient in technologies like microwave transmission, GSM, 3G, and fiber optics.
APAA SIMON AHUNGWA
Apaasimon Ahungwa is seeking a challenging position where he can apply his professional skills. He has over 10 years of experience in telecommunications, primarily with Ericsson in Nigeria, working on 2G and 3G integration and troubleshooting. He has extensive technical skills with Ericsson equipment and systems. He holds a B.Sc. in Physics/Electronics and seeks to make proficient contributions while achieving organizational goals.
Mir Ahmed Raza
Mir Ahmed Raza has over 8 years of experience as a Transmission Engineer working with various telecom operators in Saudi Arabia. He has extensive experience working with microwave transmission equipment from vendors such as Huawei, Ericsson, NEC, and ZTE. He has specialized skills in transmission technologies including microwave, SDH, DWDM and IP. He is proficient in transmission network planning, optimization, and troubleshooting.
GOPALAKRISHNAN
The document provides a summary of an engineering professional's skills and qualifications. It lists technical skills and certifications in areas such as routing, switching, wireless networks and various networking devices. It also outlines work experience with companies like Ericsson and Huawei maintaining and supporting their transmission equipment. The professional holds a BE in electrical engineering and has obtained the CCNA certification from Cisco.
EMEA OJI. CV__
The document contains a resume for Uyo Emea Oji, who has over 10 years of experience in transmission engineering and network operations, including positions at MTN Nigeria, Huawei Technologies Nigeria Ltd, and McNair Nigeria Ltd, with skills in areas such as transmission planning, implementation, maintenance, and fault resolution.
Resume from bhupathi ramu
Four years of experience in telecom network with exposure in R&D Lab Support Engineer, Project planning, RF designing GPS planning coordinating, implementation, sever omni switches Integration and commissioning of Femtos UE tested mobiles BTS (CDMA and GSM) and microwave radios, RF survey and transmission (LOS).
Rohit Kumar Jaswal_CV
Rohit Kumar has over 8 years of experience in the telecom industry. He is currently seeking a new challenging opportunity as an Area Manager where he can utilize his experience working with customers and across technical and management levels. He has a diploma in electronics and telecommunications engineering and is pursuing a bachelor's degree. He has extensive knowledge of networking concepts and experience implementing, troubleshooting, and managing various Cisco routers, switches, and firewalls.
resume_anjuln
This document provides a summary of Anjul N's resume. It outlines his objective of seeking a full-time position in a telecom company to further his professional growth. It then summarizes his educational qualifications and professional experience working on integration and implementation projects for various telecom companies like Ericsson, Airtel, and BSNL in India, Ghana, Uganda and Oman. His roles have included commissioning sites, software upgrades, troubleshooting alarms, and capacity upgrades. He has skills in Moshell, RBS Element Manager and other telecom tools.
Rahul resume.
The document provides a summary of Rahul Kumar's professional experience in telecom domain spanning over 7 years. He has expertise in LTE, 3G, fiber optics transmission including SDH, PDH, Ethernet, DWDM and microwave. Currently he works as a back office engineer providing level 2 support for a Vodafone Qatar project in Bangalore. He has extensive hands-on experience with various transmission equipment, protocols and troubleshooting techniques.
Asif CV
This document provides a summary of Muhammad Asif Sirai's qualifications and work experience. It includes his personal details, education background which includes a diploma in electronics technology and pursuing a B-Tech in electronics. It then outlines his professional experience working on projects for Ericsson-Mobilink, China Com Service, Associated Technologies, Myson Engineering System, and NEC Mobilink where he has experience with the installation, configuration, and troubleshooting of various telecommunication equipment including microwave links, BTS sites, rectifiers, E1/SDH systems, and antenna systems. His skills include working with tools such as OMTOMT, Mini Link Craft, LMT software, and technical skills in areas such as transmission
CV Abdul jabbar2016Se June 27
Abdul Jabbar is seeking a challenging job in telecommunications where he can contribute to growth and enhance his professional skills. He has over 15 years of experience in 2G, 3G, and LTE networks including installation, commissioning, configuration, and troubleshooting of radio base stations and transmission equipment from Ericsson, Huawei, ZTE, and NEC. His experience includes roles as a telecom swap engineer, RAN supervisor, and senior supervisor. He is proficient in transmission technologies, core network fundamentals, and GSM/UMTS protocols.
shriram2016
The document provides a summary of a candidate's career objective, skills, and professional experience. It summarizes as follows:
The candidate seeks a position utilizing 7.5 years of experience in the telecom sector, including roles in operations and maintenance, and wireless access networks. Currently a senior engineer accountable for operational effectiveness of wireless and core data networks, resolving issues for various customer services.
Previous experience includes telecom roles in India and Saudi Arabia, involving configuration, troubleshooting, and maintenance of microwave networks, routers, switches and other equipment. Educational qualifications include an engineering degree and diploma, with certifications in technologies like IP, TCP/IP, and Ericsson systems.
CV - Rashid
Rashid Kunjani has over 13 years of experience in telecommunications, including roles as a Team Leader and Coordinator at Seder APD Telecom and as a Senior Executive Engineer at Worldcall Telecom. He has extensive hands-on experience with network equipment from vendors such as Huawei, Nokia, ZTE, Ericsson, and Siemens. His expertise includes GSM, UMTS, LTE, CDMA, and microwave transmission systems. He is seeking a position that allows him to utilize and develop his technical knowledge and skills.
Electrical Engineer -Nabeel Cv (1)
Muhammad Nabeel Aslam is an electrical engineer with over 7 years of experience working in telecommunications. He has worked as a RAN engineer for Zhongxing Telecom Pakistan and as a BSS & Transmission engineer for Mobiserve Pvt. He has extensive experience commissioning, configuring, and troubleshooting various radio equipment including Ericsson RBS 6000 family and ZTE 8910 cabinets. He is proficient in technical software like Etap Electrical and has expertise in areas like transmission systems, rectifiers, and antenna systems.
Modassar Resume
This document contains a resume for Md Modassar summarizing his professional experience and qualifications. He has over 6 years of experience in telecommunications working on projects for companies like NR Switch N Radio Services Pvt Ltd and ZTE Telecom India Pvt Ltd. His responsibilities have included maintenance and operations of BTS cell sites, transmission equipment, and E1 networks. He is seeking a challenging role in communications that allows him to contribute as a responsible team member.
CV Shabbir 1
This document contains a summary of an individual's skills and work experience. It includes:
- Over 10 years of experience in telecommunications engineering, including expertise in radio access network maintenance and transmission network maintenance.
- Work experience with major vendors such as Nokia, Ericsson, Huawei, and ZTE, maintaining 2G, 3G, and 4G radio access networks as well as microwave transmission networks.
- Technical skills include site installation, integration, and maintenance as well as troubleshooting of radio access networks and transmission networks.
Donald resume new
Donald Kane is seeking a position as a telecommunications field technician. He has over 10 years of experience in various roles including cable technician, field integration engineer, drive tester, installer, and wireless engineer. His experience includes programming phones, installing and integrating wireless network equipment, running cable, commissioning sites, and troubleshooting network issues.
Bashir_cv
Bashirahmed has over 15 years of experience in telecommunications project management and technical roles. He has managed installation, maintenance, and expansion projects for various telecom operators in Pakistan. Bashirahmed held project management positions at Maftel Network and CCS International where he oversaw the deployment of over 400 sites. He has also worked as a regional manager, network engineer, and technical trainer for other telecom contractors. Bashirahmed has extensive technical skills including installation and maintenance of BTS equipment, microwave links, transmission equipment, and IP networks. He holds a BSC in telecommunications and has completed various technical trainings.
CV Telecom
This document is a curriculum vitae for Md Tousif Hussain Reza that includes his personal details, qualifications, objectives, skills, and professional experience. He has a Bachelor's degree in Electronics and Communication Engineering and an Advanced Diploma in Electrical Engineering. His professional experience includes working as a BTS engineer for Zte Telecom India installing 3G networks, maintaining optical fiber cables for East India Enterprise, working as a mud logging engineer for Jindal Drilling, and leading telecom network projects for Shivam Infocom as a Circle Head.
kamran cv updated
Muhammad Kamran Alvi has over 10 years of experience working for Mobilink GSM in Pakistan in various engineering roles maintaining their fiber optic and wireless networks. His roles have included engineer for fiber optic operations, lead MBU engineer, and level-1 CM engineer. He has experience working with Ericsson, Huawei, and Alcatel-Lucent equipment and managing projects such as DC power sharing between mobile operators. He holds a Bachelor's degree in Telecommunication Engineering from The GC University Faisalabad.
Similar to ENGR. IBRAHIM AHMED. MNSE (20)
Recently uploaded
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
ENGR. IBRAHIM AHMED. MNSE
- 1. IBRAHIM AHMED NTA OSOGBO, Oke-Pupa, Abere Osogbo. Osun State. E-mail: ahmed2k7@yahoo.com Tel: 08059358988/08069658346 OBJECTIVE To work in an innovative environmentwhere enlightenmentdominatesandhard work as well as diligence is rewarded. WORKING EXPERIENCEWITH DATES TECHNICAL ENGINEER NTA-STARTV NETWORK LTD. April, 2010 till date Afribank house fatai Atere way, Lagos. Uplink and Downlink Signal through Vsat and Broadband day to day. Operation and Maintenance of Digital earth station Tracking of Satellite Station for Receiving of Television Signals Installation, Operation and Maintenance of TVRO Outside Broadcasting using DSNG Logging of Daily Operation Training of IT Students and New employer Installation and Maintenance of Transmitter Maintaining and analyzed Faults on both Server hardware and Software Infrastructure. System Assembling and Installations Managing all Work Station on day to day Logging fault on day to day, Visit Sites and Customers System when necessary Knowledge on Microsoft Package, Power Point, Access, Excel and other Networking ConceptTraining on Satellite Communication and Tracking of Signal through Up Converter. Training on VSAT Installation and Engineering Broad Casting Training on how to use Micro Wave Link to Track Signal LAN Troubleshooting Maintenance of diesel engine generator Maintenance of UPS and inverter Supervision of the installation of 200 kVA Transformer. Supervision of the installation of 500 kVA Transformer.
- 2. OIL OPTION SERVICES LIMITED, 2008 17, Akande Adebeshin Street, Mafoluku, Oshodi Lagos. TransmissionEngineer(ETISALAT PROJECT, ONDO OSUN). Execute Troubleshooting and maintenance of Alcatel Evolium NEs (Running on B10 & B11 SW Version) via LMT & OMC-R (A1353 & A9153). Execute Hardware & Software configuration of Evolium BTS A9100 Commissioning & maintenance of Microwave Transmission Link [AWY 9400, MXC 9500 (HARRIS-STRATEX ECLIPSE), MPR 9500]. E1 Capacity increase of LX/UX and AWY PDH Access Radios. Site Integration including Cross-connectionto the BSC. Planning and execution of cutovers on Microwave links. Perform Routine O & M procedures for Transmission Networks. Installation of Batteries as Back up to the electricity supply to BTS sites. Power Termination on DB and RBS. Installation and maintenance of radio frequency antenna e.g. Katherine, Andrew. Installation and maintenance of sectorial (BTS) antenna (900GSM & 1800DCS). Termination of RF feeders. Installation of Diplexers. Troubleshooting of RF installations. Carrying out of VSWR and DTF Test using VSWR Tester. Proficient use of VSWR tester, compass and inclinometer Maintenance of comprehensive records on Transmission links, RBS sites equipments and spares for all sites within my assigned area. Implementation and supervision of network Transmission & RBS expansion/upgrade. React to emergency faults and ensure that all faults are rectified within the stipulated MTTR. National YouthService Corps (NYSC) (As Instructor in computer training institute) (2007-2008) On Microsoftoffice Industrial Training (IT) Warri Refining and Petrochemical Company (WRPC) A subsidiary of (NNPC) in Power Plant & Utilities (as external operator) (2005) Operation and maintenance of Gas Turbine, Steam Turbine, Boiler, Compressors, AC and DC motors.
- 3. EDUCATIONAL QUALIFICATIONS Bachelor of engineering B. Eng. (Electrical/Computer Engineering) Second class Honors. Senior Secondary Certificate Examination (SSCE) FirstSchool Leaving Certificate (FSLC) INSTITUTION ATTENDED WITH DATES Federal University of Technology,Minna,Niger State. 2001-2006 Community High School, AyetoroGbedeKogiState. 1991-1996 A.U.D ILGEA Primary School, AyetoroGbedeKogiState 1986-1991 PERSONAL DATA Sex: Male Date of Birth: 21st July 1983 Marital Status: Married State of Origin: Kogi REFEREES AS REQUESTED.