1. The X-SEL PX/QX controllers can control SCARA robots with up to 6 axes total, including the SCARA robot and additional single or cartesian axis robots.
2. The QX series are "global types" that conform to safety category 4 and require an external safety circuit, while the PX series have an internal safety circuit.
3. The controllers have functions like conveyor tracking using vision and high performance processing in a compact design that is CE compliant.
This document provides specifications for the XSEL Series 8-axis program controller sold by Electromate. It can operate up to 24 robot axes with a single controller by interpolating up to 8 axes or connecting additional controllers via DeviceNet, EtherCAT, or EtherNet/IP. It also allows networking multiple XSEL controllers via IA net for expanded I/O and monitoring capabilities. The controller includes maintenance functions to count axis movements and notify when servicing is required.
- The document describes the XSEL Series 8-axis Program Controller from Intelligent Actuator.
- It can operate up to 24 robot axes with a single controller and offers low-cost, user-friendly control.
- It is capable of interpolation operation involving up to 8 axes simultaneously in various configurations such as single-axis robots, Cartesian robots, and SCARA robots.
The X-SEL controller is a multi-axis programmable controller that can operate single or multi-axis robots and machines. It offers several features including 1) various control methods like position or program operation, 2) support for field networks like DeviceNet and ProfiBus, and 3) enhanced functions for improved trace accuracy, synchronized operation between axes, zone signaling, and push and hold operations. The document provides specifications for the different X-SEL controller types that vary in number of control axes, memory capacity, and safety compliance.
The document describes the XSEL series of multi-axis program controllers for operating RCS2 Series actuators. It provides details on controller types and models, specifications for motors, I/O, networking options, and compatible actuators. The controllers can simultaneously control up to 6 axes and are available in basic, standard, and large-capacity configurations to suit different application needs.
The document provides information about SCON controllers, including:
- There are standard and network specifications, with incremental and absolute options. Only incremental is available for pulse train input.
- It lists motor, encoder, I/O cable length, power/voltage options. Network connection specifications are also optional.
- Control can be performed via PIO, pulse train, or connecting to a field network depending on the specification. Positioning of up to 512 points is possible in positioner or solenoid valve modes.
The document describes a PSEL controller for operating RCP3/RCP2 series actuators. The controller combines various control functions into a single unit. It can handle operation and communication with one controller for up to two axes. It supports up to 1500 positioning points and functions like path operations and teaching operation.
The document describes a program controller for operating RCA2/RCA series actuators. The controller can handle various controls for a single or dual axis system. It supports up to 1500 positioning points and can perform functions like linear/arc interpolation, path operations, and teaching operations through a programmed control mode or PLC input signals in a positioner mode. Key specifications of the controller include support for up to two motor axes, 1500 positioning points, and integrated operation and communication capabilities.
The document describes the PRO-A08V48 programmable servo drive. It is a compact drive solution for rotary or linear brushless, stepper or PMDC brush motors with power up to 385W and 48V nominal voltage. It integrates advanced motor control and motion control functionality. The drive can operate autonomously or as part of a multi-axis distributed control solution. It is programmable via ElectroCraft's MotionPRO Suite software.
This document provides specifications for the XSEL Series 8-axis program controller sold by Electromate. It can operate up to 24 robot axes with a single controller by interpolating up to 8 axes or connecting additional controllers via DeviceNet, EtherCAT, or EtherNet/IP. It also allows networking multiple XSEL controllers via IA net for expanded I/O and monitoring capabilities. The controller includes maintenance functions to count axis movements and notify when servicing is required.
- The document describes the XSEL Series 8-axis Program Controller from Intelligent Actuator.
- It can operate up to 24 robot axes with a single controller and offers low-cost, user-friendly control.
- It is capable of interpolation operation involving up to 8 axes simultaneously in various configurations such as single-axis robots, Cartesian robots, and SCARA robots.
The X-SEL controller is a multi-axis programmable controller that can operate single or multi-axis robots and machines. It offers several features including 1) various control methods like position or program operation, 2) support for field networks like DeviceNet and ProfiBus, and 3) enhanced functions for improved trace accuracy, synchronized operation between axes, zone signaling, and push and hold operations. The document provides specifications for the different X-SEL controller types that vary in number of control axes, memory capacity, and safety compliance.
The document describes the XSEL series of multi-axis program controllers for operating RCS2 Series actuators. It provides details on controller types and models, specifications for motors, I/O, networking options, and compatible actuators. The controllers can simultaneously control up to 6 axes and are available in basic, standard, and large-capacity configurations to suit different application needs.
The document provides information about SCON controllers, including:
- There are standard and network specifications, with incremental and absolute options. Only incremental is available for pulse train input.
- It lists motor, encoder, I/O cable length, power/voltage options. Network connection specifications are also optional.
- Control can be performed via PIO, pulse train, or connecting to a field network depending on the specification. Positioning of up to 512 points is possible in positioner or solenoid valve modes.
The document describes a PSEL controller for operating RCP3/RCP2 series actuators. The controller combines various control functions into a single unit. It can handle operation and communication with one controller for up to two axes. It supports up to 1500 positioning points and functions like path operations and teaching operation.
The document describes a program controller for operating RCA2/RCA series actuators. The controller can handle various controls for a single or dual axis system. It supports up to 1500 positioning points and can perform functions like linear/arc interpolation, path operations, and teaching operations through a programmed control mode or PLC input signals in a positioner mode. Key specifications of the controller include support for up to two motor axes, 1500 positioning points, and integrated operation and communication capabilities.
The document describes the PRO-A08V48 programmable servo drive. It is a compact drive solution for rotary or linear brushless, stepper or PMDC brush motors with power up to 385W and 48V nominal voltage. It integrates advanced motor control and motion control functionality. The drive can operate autonomously or as part of a multi-axis distributed control solution. It is programmable via ElectroCraft's MotionPRO Suite software.
Kikusui DC power supply high power capacity 4kW, 8kW
Up to 1500V output
Programmable
For Solar panel testing Electric vehicle battery testing
https://www.n-denkei.com/singapore/inquiry/
The document provides information on program controllers for operating RCS2 series actuators. The controllers can handle various controls for one or two axes. They support up to 20,000 positioning points and allow for functions like push-motion operation, teaching operation, and path operations when two axes are connected. The document outlines the specifications and I/O functions of the SSEL controller model.
The MAXPOS is a motion controller capable of efficiently controlling DC motors and BLDC motors. It provides high performance and dynamic features through field-oriented control and a wide range of operating modes. The MAXPOS is designed to be used as a slave node in an EtherCAT network and is configured via EtherCAT or USB using the MAXPOS Studio graphical user interface.
The document summarizes an ElectroCraft PRO Series Programmable Servo Drive called the PRO-A04V36. It is a compact, cost-effective drive solution for controlling rotary or linear brushless, stepper, or PMDC brush motors of up to 144W power. The drive integrates advanced motor control and motion control functionality. It can operate autonomously or as part of a distributed motion control system and is programmable via the MotionPRO Suite interface.
The PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 16 models in total with 4 maximum voltage outputs (L, ML, MH, and H) and 4 maximum power outputs (400 W, 800 W, 1200 W and 2000 W). The series is equipped with LAN (LXI), USB, and RS232C as standard interfaces that are essential for system integration. The PWR-01 also features front-facing output terminals, variable internal resistance, bleeder ON/OFF functions, CC/CV priority switching function, synchronized operation, various protections, and programmable internal memory.
https://www.n-denkei.com/singapore/inquiry/
This document provides information on various ROBO Cylinder controllers including:
1) It categorizes the controllers into three groups: positioner type, program type, and network type based on their operations and functions.
2) It provides tables that list the controller models and corresponding positioner/actuator types as well as specifications like input voltage, number of controllable axes, and supported field networks.
3) It includes sections that provide overviews of the different controller types including 3-position controllers, program controllers, and network compatible controllers.
Bien tan ls gioi thieu bien tan i c5 series-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document describes the ROBO Cylinder ERC3 series, which comprises a built-in controller and actuator. Key features of the ERC3 include being space-saving due to not requiring a separate controller, allowing for teaching close to the actuator, and having an increased maximum payload, speed, and stroke compared to conventional models. The ERC3 comes in various types and models for different applications. It can be operated using a built-in controller, teaching pendant, software, or Quick Teach accessory without needing a PLC or power supply in some cases.
- The document discusses Nippon Pulse motion control chips and boards, including programmable pulse generators, counter chips, and high-speed serial communication chips.
- It provides details on their programmable pulse generator product lines including specifications for output speed, pulse rate settings, acceleration/deceleration rates, positioning ranges, and other technical specifications.
- Applications for Nippon Pulse motion control products include factory automation equipment, semiconductor manufacturing, medical devices, security systems, and more.
This document provides information on the ACON position controller models C/CG/CY/PL/PO/SE. It lists the 5 controller types and their functions. The C/CG types are positioner controllers that can control up to 512 positioning points. The CY type controls solenoid valves. The PL/PO types use pulse train control. The SE type uses serial communication. Peripheral devices, cables, and the I/O specifications are also described.
The document describes a multifunctional electronic load called the PLZ-5W series. It can operate from 1V to 150V with a maximum slew rate of 60A/μs. It includes features like arbitrary I-V curve settings, sequence programming of up to 10,000 steps, impedance measurement, and various communication interfaces. The PLZ-5W series improves on previous models with a high-resolution color LCD, wider voltage range, and new ARB mode for customizing I-V profiles.
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
Ls catalog thiet bi tu dong i c5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document discusses the P-Driver pulse-train input driver that enables flexible control of IAI's ROBO CYLINDER actuators and single-axis robots. The P-Driver can control a wide range of actuators with various options and functions including torque limiting, brake control, feedback, and feed-forward control. It connects to actuators, provides power connections, and includes status indicators and connectors for communication, I/O signals, and encoders.
The DCM8054/8027 is a stepper motor drive that can operate between 20-80VDC with output currents up to 5.5A/2.8A. It uses advanced DSP control algorithms to provide smooth motor movement. It has features like anti-resonance control, microstepping, soft-start, input isolation, and selection of pulse modes, resolutions, and current levels through onboard switches and jumpers. The document provides details on specifications, connections, settings, and applications for the stepper motor drive.
The document discusses PSEP/ASEP controllers which are 3-position controllers for pulse and servo motors. Key features of the controllers include:
1. Operating with the same signals as solenoid valves for compatibility with existing PLC programs.
2. Having a dustproof type with IP53 protection for outdoor mounting.
3. Providing a simple absolute type that can store position on power-up and start from that position.
4. Allowing for pushing operation and intermediate stopping like air cylinders.
5. Having an optional touch panel teaching unit for intuitive data entry without manuals.
The document provides information on available controller models, compatible actuators and cables, and accessories like teaching
This document provides specifications for RCA ROBO Cylinder actuators including:
1) Load and speed capabilities based on stroke length and lead size.
2) Dimensions and weights that vary depending on stroke length.
3) A list of compatible controllers that can operate the actuators including their input voltages and positioning capabilities.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
The document outlines conventions for double page spreads, including using large images that take up more than half a page to dominate the visual space. Text is arranged in neat columns of different sizes. Headings are in big, bold lettering and subheadings provide a brief overview of the article topic. Images and text blocks are the main visual focus against a simple, clear or gray background.
The Harrisburg Motorcycle Club holds monthly membership meetings and work parties throughout the year. Membership meetings take place on the first Saturday of each month at 7 PM, while work parties are held on the third Sunday of each month starting at 9 AM. The calendar shows the dates for each event in 2013.
Innovations conference 2014 dr tracy robinson development of a q stream kno...Cancer Institute NSW
This document describes the development and evaluation of a QStream knowledge translation program on referral for ovarian cancer. It involved 21 medical and gynecological oncologists who completed online case-based multiple choice questions. Evaluation found it increased clinician knowledge on genetic testing referral guidelines and prompted discussions. Interviews showed it was well-received and could be completed in short sessions. Some clinicians reported making referrals at lower thresholds after completing the program. While it showed promise, larger studies are needed to fully evaluate effectiveness and optimal question spacing.
Kikusui DC power supply high power capacity 4kW, 8kW
Up to 1500V output
Programmable
For Solar panel testing Electric vehicle battery testing
https://www.n-denkei.com/singapore/inquiry/
The document provides information on program controllers for operating RCS2 series actuators. The controllers can handle various controls for one or two axes. They support up to 20,000 positioning points and allow for functions like push-motion operation, teaching operation, and path operations when two axes are connected. The document outlines the specifications and I/O functions of the SSEL controller model.
The MAXPOS is a motion controller capable of efficiently controlling DC motors and BLDC motors. It provides high performance and dynamic features through field-oriented control and a wide range of operating modes. The MAXPOS is designed to be used as a slave node in an EtherCAT network and is configured via EtherCAT or USB using the MAXPOS Studio graphical user interface.
The document summarizes an ElectroCraft PRO Series Programmable Servo Drive called the PRO-A04V36. It is a compact, cost-effective drive solution for controlling rotary or linear brushless, stepper, or PMDC brush motors of up to 144W power. The drive integrates advanced motor control and motion control functionality. It can operate autonomously or as part of a distributed motion control system and is programmable via the MotionPRO Suite interface.
The PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 16 models in total with 4 maximum voltage outputs (L, ML, MH, and H) and 4 maximum power outputs (400 W, 800 W, 1200 W and 2000 W). The series is equipped with LAN (LXI), USB, and RS232C as standard interfaces that are essential for system integration. The PWR-01 also features front-facing output terminals, variable internal resistance, bleeder ON/OFF functions, CC/CV priority switching function, synchronized operation, various protections, and programmable internal memory.
https://www.n-denkei.com/singapore/inquiry/
This document provides information on various ROBO Cylinder controllers including:
1) It categorizes the controllers into three groups: positioner type, program type, and network type based on their operations and functions.
2) It provides tables that list the controller models and corresponding positioner/actuator types as well as specifications like input voltage, number of controllable axes, and supported field networks.
3) It includes sections that provide overviews of the different controller types including 3-position controllers, program controllers, and network compatible controllers.
Bien tan ls gioi thieu bien tan i c5 series-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document describes the ROBO Cylinder ERC3 series, which comprises a built-in controller and actuator. Key features of the ERC3 include being space-saving due to not requiring a separate controller, allowing for teaching close to the actuator, and having an increased maximum payload, speed, and stroke compared to conventional models. The ERC3 comes in various types and models for different applications. It can be operated using a built-in controller, teaching pendant, software, or Quick Teach accessory without needing a PLC or power supply in some cases.
- The document discusses Nippon Pulse motion control chips and boards, including programmable pulse generators, counter chips, and high-speed serial communication chips.
- It provides details on their programmable pulse generator product lines including specifications for output speed, pulse rate settings, acceleration/deceleration rates, positioning ranges, and other technical specifications.
- Applications for Nippon Pulse motion control products include factory automation equipment, semiconductor manufacturing, medical devices, security systems, and more.
This document provides information on the ACON position controller models C/CG/CY/PL/PO/SE. It lists the 5 controller types and their functions. The C/CG types are positioner controllers that can control up to 512 positioning points. The CY type controls solenoid valves. The PL/PO types use pulse train control. The SE type uses serial communication. Peripheral devices, cables, and the I/O specifications are also described.
The document describes a multifunctional electronic load called the PLZ-5W series. It can operate from 1V to 150V with a maximum slew rate of 60A/μs. It includes features like arbitrary I-V curve settings, sequence programming of up to 10,000 steps, impedance measurement, and various communication interfaces. The PLZ-5W series improves on previous models with a high-resolution color LCD, wider voltage range, and new ARB mode for customizing I-V profiles.
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
Ls catalog thiet bi tu dong i c5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document discusses the P-Driver pulse-train input driver that enables flexible control of IAI's ROBO CYLINDER actuators and single-axis robots. The P-Driver can control a wide range of actuators with various options and functions including torque limiting, brake control, feedback, and feed-forward control. It connects to actuators, provides power connections, and includes status indicators and connectors for communication, I/O signals, and encoders.
The DCM8054/8027 is a stepper motor drive that can operate between 20-80VDC with output currents up to 5.5A/2.8A. It uses advanced DSP control algorithms to provide smooth motor movement. It has features like anti-resonance control, microstepping, soft-start, input isolation, and selection of pulse modes, resolutions, and current levels through onboard switches and jumpers. The document provides details on specifications, connections, settings, and applications for the stepper motor drive.
The document discusses PSEP/ASEP controllers which are 3-position controllers for pulse and servo motors. Key features of the controllers include:
1. Operating with the same signals as solenoid valves for compatibility with existing PLC programs.
2. Having a dustproof type with IP53 protection for outdoor mounting.
3. Providing a simple absolute type that can store position on power-up and start from that position.
4. Allowing for pushing operation and intermediate stopping like air cylinders.
5. Having an optional touch panel teaching unit for intuitive data entry without manuals.
The document provides information on available controller models, compatible actuators and cables, and accessories like teaching
This document provides specifications for RCA ROBO Cylinder actuators including:
1) Load and speed capabilities based on stroke length and lead size.
2) Dimensions and weights that vary depending on stroke length.
3) A list of compatible controllers that can operate the actuators including their input voltages and positioning capabilities.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
The document outlines conventions for double page spreads, including using large images that take up more than half a page to dominate the visual space. Text is arranged in neat columns of different sizes. Headings are in big, bold lettering and subheadings provide a brief overview of the article topic. Images and text blocks are the main visual focus against a simple, clear or gray background.
The Harrisburg Motorcycle Club holds monthly membership meetings and work parties throughout the year. Membership meetings take place on the first Saturday of each month at 7 PM, while work parties are held on the third Sunday of each month starting at 9 AM. The calendar shows the dates for each event in 2013.
Innovations conference 2014 dr tracy robinson development of a q stream kno...Cancer Institute NSW
This document describes the development and evaluation of a QStream knowledge translation program on referral for ovarian cancer. It involved 21 medical and gynecological oncologists who completed online case-based multiple choice questions. Evaluation found it increased clinician knowledge on genetic testing referral guidelines and prompted discussions. Interviews showed it was well-received and could be completed in short sessions. Some clinicians reported making referrals at lower thresholds after completing the program. While it showed promise, larger studies are needed to fully evaluate effectiveness and optimal question spacing.
Como criar uma operação em lote (batch operations)Helal Cabral
O documento discute operações em lote (batch operations) no Drupal, incluindo o que é uma operação em lote, o fluxo de processos de um batch e como demonstrar um batch em execução. A palestra também analisa o código-fonte de um batch executado e responde perguntas sobre o tópico.
Este documento provee definiciones breves de varios conceptos clave de informática incluyendo: información, datos, informática, computadoras, software, hardware, procesador, sistema operativo, archivos, redes, internet, USB y multimedia. Explica que la información es un conjunto de datos con significado, la informática es el tratamiento automático de la información, y que el hardware y software son componentes fundamentales de las computadoras.
Este documento descreve o programa de um curso de leitura radiológica de pneumoconioses realizado entre 08 e 11 de agosto de 2012. O curso teve como objetivo treinar médicos em leitura radiológica das pneumoconioses e contou com preleções, demonstrações práticas e atividades. O programa incluiu discussões sobre aspectos clínicos e radiológicos de doenças relacionadas à poeira de sílica e amianto.
Este documento proporciona una lista de términos musicales en inglés y su traducción al portugués. Incluye el nombre de varios instrumentos musicales como piano, guitarra, flauta y tambor, así como términos relacionados con la música como concierto, cantante, canción y orquesta. Además, presenta géneros musicales como jazz, música clásica y folk, y roles como músico, compositor y artista.
Este documento describe diferentes tipos de virus informáticos y antivirus. Explica que los virus son programas maliciosos que pueden dañar o destruir la funcionalidad de una computadora. Luego describe cuatro clases de virus: gusano, caballo de Troya, virus mutante y virus de sobreescritura. Finalmente, explica que los antivirus son programas que previenen virus al detectarlos y desinfectarlos, funcionando como barreras de fuego contra programas maliciosos.
Presentation: Abandoned Shopping Carts: Turn Browsers into BuyersMediaPost
What to do about that age-old problem -- customers will shop, but not buy? Learn how American Airlines keeps prospective customers engaged and captures additional revenue with its abandoned shopping cart and retargeting email trigger campaign. Since launch, revenue generated through the messaging has brought a revenue lift equivalent to two large email blasts – sent to 24 times as many people.
Projeto desenvolvido para processo de seleção de estágio no INdt.
Trata-se da criação de um aplicativo que ajuda no controle de peso.
Neste projeto contém brevemente todas as etapas realizadas até a criação
de suas interfaces gráficas.
Making the Most of Your Station Facebook PageEric Athas
This document provides guidance on using Facebook and Twitter for radio stations. It discusses using Facebook to engage the audience through posts with compelling visuals and headlines. It recommends varying post types, avoiding promotional posts, and connecting with the community. Stations are given an assignment to create two Facebook posts. The document also announces a Twitter contest and scavenger hunt to encourage stations to learn Twitter best practices like live tweeting a chat. Key details about the contest and upcoming chat are highlighted.
O documento apresenta a experiência e propostas de trabalho de Marcos Abreu na gestão de operações industriais, com foco em desenvolver equipes, melhorar resultados operacionais e financeiros, e implementar as melhores práticas de gerenciamento. Ele oferece modelos e exemplos aplicados com sucesso em diferentes empresas para gestão da produção, manutenção, lubrificação, SSMA, custos, despesas e recursos humanos.
Taller de ciencias naturales 3 periodo liceo farallones del norte doralrosendo
El primer documento presenta preguntas sobre temas de ciencias naturales como los cuerpos celestes, los movimientos de rotación y traslación de la Tierra, y partes del universo. El segundo documento contiene preguntas relacionadas con ciencias sociales sobre Colombia, incluyendo su capital, bandera, y deberes de los ciudadanos. Ambos documentos buscan evaluar conocimientos básicos de estudiantes sobre estos temas a través de preguntas y actividades como sopa de letras y dibujos.
The document describes the Ultra Compact SCARA Robot IX-120/150. It has an ultra compact size of 47mm width and 132mm depth, allowing for installation in small spaces. It has a rated load capacity of 0.2kg and maximum load capacity of 1kg, and high-speed performance of 0.35 seconds cycle time. It is equipped with an absolute encoder that retains position even after power off, eliminating the need for home returns. Models include the IX-NNN1205 standard type with 120mm arm length and 50mm vertical axis, and the IX-NNN1505 with 150mm arm length.
The AIR-CAP2702E-I-K9 is an 802.11ac wireless access point that provides 3x4 MIMO with three spatial streams for greater coverage and capacity. It supports data rates up to 1.3 Gbps and utilizes external antennas. The access point has two Ethernet ports, a console port, and requires a wireless controller for management. It has dimensions of 8.69 x 8.69 x 1.99 inches and can be powered via 802.3at PoE+ or an external power supply.
The Cisco Aironet 3602E-Q-K9 is an 802.11n wireless access point that delivers up to three times more wireless coverage than competing solutions. It supports 4x4 MIMO and three spatial streams to sustain reliable connections at higher speeds further from the access point. The modular platform also offers future expansion options to support newer standards like 802.11ac. It has external antenna connectors and dimensions of 8.7 x 8.7 x 2.11 inches. The access point has features such as 450 Mbps data rates and beamforming capabilities.
The AIR-CAP2702I-E-K9 is an 802.11ac wireless access point that provides 3x4 MIMO and three spatial streams for greater wireless coverage and capacity. It has internal antennas and operates in the 2.4GHz and 5GHz bands. The access point connects to a wireless LAN controller for management and requires 802.3at PoE+ for power. It offers data rates up to 1.3Gbps and other 802.11ac and 802.11n capabilities. The AIR-CAP2702I-E-K9 is available for purchase online from HI-NETWORK.COM.
The AIR-CAP2702E-E-K9 is a 3x4 MIMO 802.11ac wireless access point that provides coverage for enterprise networks. It supports data rates up to 1.3 Gbps and uses external antennas. The access point has two Ethernet ports, a management port, runs on 44-57VDC power, and measures 8.69 x 8.69 x 1.99 inches without its mounting bracket. It requires a wireless controller for management and configuration.
The Vacon NXL AC drive is a compact and powerful drive for industrial and residential applications from 0.25 to 30 kW. It has an easy-to-use design with high protection classes and integrated components. Installation and programming are quick with instructions attached. The drive offers flexible control capabilities and features in a small size. It provides low motor noise and a wide range of control options.
The AIR-CAP2702E-F-K9 is an 802.11ac wireless access point that provides 3x4 MIMO with three spatial streams for greater coverage and capacity. It supports frequencies between 2.4-5.7 GHz with multiple channel widths. External antennas can be connected and it has Gigabit Ethernet and console ports along with support for PoE+ power. The access point is meant to be used with a Cisco wireless LAN controller and provides enterprise wireless networking capabilities such as beamforming and advanced RF technologies.
The AIR-CAP2702I-F-K9 is an 802.11ac wireless access point with 3x4 MIMO and three spatial streams. It supports data rates up to 1.3 Gbps and operates in the 2.4 GHz and 5 GHz bands with internal antennas. The access point connects to a wireless LAN controller for management and requires 802.3at PoE+ for powering. It has two Ethernet ports, LED indicators, and dimensions of 8.69 x 8.69 x 1.99 inches.
ABSODEX - MESA INDEXADORA - INDEXADOR CKD CORPORATION - ABSODEX - CB054A
Os indexadores oferecem alto desempenho com alta precisão. As plataformas giratórias estão disponíveis em muitas variantes e fornecem um torque máximo entre 6 e 1000Nm. A velocidade máxima está entre 75 e 300 rpm. Ao usar um resolver absoluto, o sensor de posição inicial tornou-se redundante e o toca-discos sempre sabe exatamente onde está. Como 1 revolução é dividida em 540672 posições, uma precisão de indexação de +/- 15 segundos de arco e uma precisão de repetição de 5 segundos de arco. possível. Devido à construção especial do prato giratório, todos os modelos são à prova de poeira e não requerem manutenção. Estão disponíveis tipos que estão em conformidade com IP65. Como padrão, esses toca-discos são fornecidos com um pacote de software para que esses toca-discos possam ser facilmente configurados através do PC. Também é possível fornecer um terminal manual.
Operação Flexível - Com uma função de programação abundante - realize a operação que você deseja.
Reduza a carga de trabalho e economize espaço - Um design simples com 4 recursos úteis padrão.
Alta Confiabilidade e Manutenção Livre - Sem engrenagens.
Software fácil de programar, com até 10mil diferentes tipos de programação.
Durabilidade mínima 10 anos.
Montado diretamente, sem engrenagens, correias ou transmissões.
+ de 10 mil diferentes programações.
+ de 4 Milhões de diferentes posições angulares.
+ de 3600 ângulos diferentes.
100% LIVRE de manutenção.
Conectividade com os protocolos: IOT, ETHERCAT, CCLINK, DEVICENET, PROFIT BUS E ETHERNET.
Link técnico: https://lnkd.in/dgkQjC4c
#GREENTIMESARECOMING
Aerodynamic Technology
11 4177-1010
11 98640-4040
vendas@aerotech.ind.br
www.aerotech.ind.br
The Cisco Aironet 3600 Series access point delivers up to three times more wireless coverage than competitors for mobile devices. It supports 4x4 MIMO and three spatial streams for reliable high-speed connections at greater distances. The modular platform offers investment protection and can be expanded to support upcoming 802.11ac clients with 1.3Gbps speeds or add security and spectrum monitoring features. The AIR-CAP3602E-R-K9 is an external antenna 802.11n access point that operates on 2.4GHz and 5GHz channels with a maximum throughput of 450Mbps. It has 10/100/1000 Ethernet and console ports and dimensions of 8.7x8.7x2.
The Cisco Aironet 3600 Series access point delivers up to three times more wireless coverage than competitors for mobile devices. It supports 4x4 MIMO and three spatial streams for reliable high-speed connections at greater distances from the access point. The modular platform also provides investment protection and can be expanded to support upcoming 802.11ac clients with 1.3Gbps speeds or add security and spectrum monitoring features.
The AIR-CAP2702E-A-K9 is an 802.11ac wireless access point that provides 3x4 MIMO and three spatial streams for high-density wireless coverage. It supports data rates up to 1.3Gbps and uses external antennas. The access point is powered by 802.3at PoE+ and has two Ethernet ports, a console port, and LED status indicators. It is compatible with Cisco wireless controllers and provides wireless coverage in the 2.4GHz, 5GHz, and 5GHz bands.
The AIR-CAP3602I-A-K9 is a Cisco 802.11n wireless access point that provides up to three times more wireless coverage than competing solutions. It uses 4x4 MIMO with three spatial streams and internal antennas to deliver reliable connections at higher speeds from further away. The modular access point also supports future expansion modules for 802.11ac and additional security and management features. It has Gigabit Ethernet and console ports and is available from HI-NETWORK.COM for networking equipment sales and support.
The AIR-CAP3602I-T-K9 is a Cisco access point that delivers up to three times more wireless coverage than competitors. It supports 4x4 MIMO and three spatial streams to sustain reliable connections at higher speeds from further away. The access point is modular to support future 802.11ac and security modules. It has internal antennas and operates on multiple frequency bands and channels with a maximum data rate of 450Mbps. The AIR-CAP3602I-T-K9 has dimensions of 8.7 x 8.7 x 2.11 inches and weighs 2.5 pounds.
The Cisco Aironet 3600 Series access point delivers up to three times more wireless coverage than competitors for mobile devices. It supports 4x4 MIMO and three spatial streams for reliable high-speed connections at 450 Mbps from further away. The modular platform also provides investment protection and can be expanded to support upcoming 802.11ac clients at 1.3 Gbps speeds or add security and spectrum monitoring features. The AIR-CAP3602E-S-K9 is an external antenna 802.11n access point that operates on 2.4 GHz and 5 GHz channels with a maximum data rate of 450 Mbps. It has dimensions of 8.7 x 8.7 x 2.11 inches and weighs
The document is a datasheet for the Cisco AIR-AP3802I-R-K9C access point. It provides an overview of the access point's features including its frequency bands and channels, internal antennas, interfaces, memory specifications, dimensions, and regulatory compliance. Tables in the datasheet compare the specifications of the AIR-AP3802I-R-K9C to a similar Cisco access point model and provide contact information for the supplier.
The Cisco Aironet 3602E-A-K9 is an 802.11n wireless access point that delivers up to three times more wireless coverage than competing solutions. It supports 4x4 MIMO and 3 spatial streams to provide reliable connections at higher speeds from further distances. It also offers future-proof modularity to support emerging standards like 802.11ac. The access point has external antenna connectors and dimensions of 8.7 x 8.7 x 2.11 inches. It provides wireless speeds up to 450 Mbps and includes features such as packet aggregation and dynamic frequency selection.
The AIR-CAP2702I-A-K9 is an 802.11ac wireless access point that provides 3x4 MIMO and three spatial streams for high-density wireless coverage. It has internal antennas and operates in the 2.4GHz and 5GHz bands with channels up to 80MHz wide. The access point connects to a wireless LAN controller for management and supports data rates up to 1.3Gbps.
The document provides information about the Huawei CloudEngine S5731-S48S4X network switch, including its specifications, features, dimensions, ports, memory, power requirements, and how to purchase. It has 48 Gigabit Ethernet ports, 4 10GbE ports, weighs 7.65 kg, and supports functions like IPv6, stacking, and power redundancy. For purchase and additional details, contact the seller at the listed email and phone.
The Cisco AIR-CAP3602E-T-K9 is an 802.11n wireless access point that delivers up to three times more wireless coverage than competing solutions. It supports 4x4 MIMO and 3 spatial streams to provide reliable connections at higher speeds from further distances. It is a modular platform that supports future 802.11ac and security modules. The access point has external antenna connectors and dimensions of 8.7 x 8.7 x 2.11 inches. It operates in the 2.4GHz and 5GHz bands with up to 450Mbps data rates and includes features such as MRC, beamforming, and dynamic frequency selection.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...Electromate
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...Electromate
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...Electromate
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...Electromate
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...Electromate
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Electromate
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...Electromate
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with BrakeElectromate
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsElectromate
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported SpecsElectromate
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsElectromate
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CAElectromate
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsElectromate
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsElectromate
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC SpecsElectromate
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB SpecsElectromate
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
UiPath Test Automation using UiPath Test Suite series, part 5
Iai xsel px_qx_specsheet
1. Large-Capacity
SCARA ControllerX-SEL PX/QX
Features
1 Controlling SCARA robots (4 axes)
plus 2 additional axes
The X-SEL PX/QX can control SCARA robots plus up to two
axes in a combination of single-axis and/or cartesian robots
(total wattage: 2400 W) (*1). If the SCARA robot has an arm
length of 500/600, two 750-W axes can be operated together.
(*1) Single-axis robots may not be connectable depending on the type of
SCARA robot. For details, refer to the notes under “Models.”
2 “Global type” for applications that require conformance to safety category 4
The “global type” does not have a built-in drive-source cutoff circuit. Instead, it cuts off the drive source using an external
safety circuit. This design conforms to safety category 4 under ISO 13849-1. Both the large-capacity type (PX) and
large-capacity global type (QX) conform to the CE Mark standard.
Camera
Works
3 Conveyor tracking function (Optional)
The PX/QX can be configured to detect works on the conveyor using a vision
system and handle them synchronously with the conveyor movement.
The conveyor tracking function will surely improve the work efficiency of your
equipment.
(Note) The conveyor tracking function is effective only if the actuator has an arm length of 500/600.
Also, this function may not be supported under certain operating conditions. If you are considering
adding the conveyor tracking option, consult IAI’s Sales Department.
4 Compact, high performance and CE-compliant
Approx. 40% slimmer than IAI’s
conventional controllers (X-SEL general
-purpose controllers).
Significantly faster than IAI’s conventional
controllers (the command processing time
is around half).
Connectable to DeviceNet, CC-Link, Ethernet
and other networks.
Conforming to the CE Mark standard.
265mm Conventional
CONTROLLER
RB
C.POWER
FUSE
M4
LS4
M3
LS3
M2
LS2
M1
LS1
PG1
BK1
PG2
BK2
PG3
BK3
PG4
BK4
CODE
I/O1 I/O2 I/O3 I/O4
MODE
TP
HOST
454.4mm
XSEL-KX (general-purpose type), 4-axis, 1.6 Kw XSEL-PX 4-axis, 2.4Kw
product
New
product
4 axes
2 axes
1
2
3
4
5
6
1 program
Simultaneous Control of SCARA Robots and
Single-Axis/Cartesian Robots with One Controller
A large-capacity SCARA controller capable of controlling up to six axes
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. 1
Models
XSEL - PX6 - NNN5020 - 750AL - 750ABL - DV - N1 - EEE - 2 - 3
➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈ ➉
Series
XSEL
➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈ ➉
PX4
(Large-capacity, 4-axis type)
PX5
(Large-capacity, 5-axis type)
PX6
(Large-capacity, 6-axis type)
QX4
(Large-capacity, global
4-axis type)
QX5
(Large-capacity, global
5-axis type)
QX6
(Large-capacity, global
6-axis type)
Notes
* If the SCARA robot has an arm length of 700/800,
the PX/QX connects up to 5 axes (SCARA + 1 axis).
* The high-speed type connects up to 4 axes
(SCARA only).
Specifications
Control power input
Motor power input
Power-supply capacity
Safety circuit configuration
Drive-power cutoff method
Enable input
Position detection method
Speed setting (*3)
Programming language
Number of program steps
Number of positions
Weight (*4)
NNN1205~8040
(Standard type)
NSN5016~6016
(High-speed type)
NNW2515~8040
(Dustproof/splash-proof type)
TNN3015~3515
(Wall mount type)
UNN3015~3515
(Wall mount, inverse type)
HNN5020~8040
(Ceiling mount type)
INN5020~8040
(Inverse type)
NNC1205~8040
(Cleanroom type)
PX4
Blank
(No single axis)
Blank
(No single axis)
20
(20W)
30
(30W)
60
(60W)
100
(100W)
200
(200W)
400
(400W)
600 L
(600W)
750 L
(750W)
20
(20W)
30
(30W)
60
(60W)
100
(100W)
200
(200W)
400
(400W)
600 L
(600W)
750 L
(750W)
Blank
(No network)
DV
(DeviceNet)
CC
(CC-Link)
PR
(ProfiBus)
ET
(Ethernet)
E
(Not used)
N1
I/O board
NPN32/16
N2
I/O board
NPN16/32
N3
I/O board
NPN48/48
P1
I/O board
PNP32/16
P2
I/O board
PNP16/32
P3
I/O board
PNP48/48
E
(Not used)
N1
I/O board
NPN32/16
N2
I/O board
NPN16/32
N3
I/O board
NPN48/48
P1
I/O board
PNP32/16
P2
I/O board
PNP16/32
P3
I/O board
PNP48/48
Large-capacity type Large-capacity global type
( )
PX5/PX6 QX4 QX5/QX6
3625VA max. (*1) 5005VA max. (*2) 3625 max. (*1) 5005 max. (*2)
Redundant configuration not supported
Internal cutoff relay
Contact-B input (internal power supply type)
2400W
Single-phase 200/230VAC -15%, +10%
Three-phase 200/230VAC -10%, +10%
Redundant configuration supported
External safety circuit
(external power supply type, redundant)
Incremental encoder / absolute encoder
1mm/sec~2000mm/sec
0.01G~1G
Super SEL Language
6000 steps (total)
4000 positions (total)
64 programs (16 programs)
0~40°C, 10~95% (non-condensing)
5.2kg 5.7kg 4.5kg 5kg
*1 When a SCARA robot of 700/800 arm length is operated. *2 When a SCARA robot of 500/600 arm length and two 750-W axes are operated.
*3 The maximum limit varies depending on the actuator type. *4 The controller weight includes the absolute battery, brake mechanism and expansion I/O box.
E
(Not used)
E
(Not used)
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
N1
I/O board
NPN32/16
N2
I/O board
NPN16/32
N3
I/O board
NPN48/48
P1
I/O board
PNP32/16
P2
I/O board
PNP16/32
P3
I/O board
PNP48/48
N1
I/O board
NPN32/16
N2
I/O board
NPN16/32
N3
I/O board
NPN48/48
P1
I/O board
PNP32/16
P2
I/O board
PNP16/32
P3
I/O board
PNP48/48
2
Standard
specification:
2m
3
(3m)
5
(5m)
0
(None)
3
Three-phase
200V
Controller type IX robot model Dedicated
network slot
Motor
output
of axis 5
Motor
output
of axis 6
Standard
I/O I/O flat cable
length
Power-supply
voltage
Expansion I/O
Slot 1 Slot 2 Slot 3 Slot 4
Series
Indicate the series name.
Controller type
Indicate the controller type.
PX4 Large-capacity, dedicated SCARA specification
Large-capacity, 5-axis (SCARA + 1 axis) specification
Large-capacity, 6-axis (SCARA + 2 axes) specification
Large-capacity, dedicated SCARA specification
conforming to safety category 4
Large-capacity, 5-axis (SCARA + 1 axis) specification
conforming to safety category 4
Large-capacity, 6-axis (SCARA + 2 axes) specification
conforming to safety category 4
PX5
PX6
QX4
QX5
QX6
IX robot model
Indicate the type of the SCARA robot to be operated.
Motor output of axis 5 (single-axis robot)
Indicate the motor output of the single-axis robot connected
as axis 5 of the PX5/PX6/QX5/QX6.
In , enter codes corresponding to the encoder type and
desired option(s).
* If you are selecting multiple options, enter the corresponding
codes in alphabetical order after the encoder type code.
If you are ordering your controller without options,
enter only the encoder type code.
(Encoder type A: Absolute / I: Incremental)
(Options B: Brake / C: Creep sensor
L: Limit switch
M: Master-axis designation in synchronized operation
S: Slave-axis designation in synchronized operation)
Leave the space blank for the PX4/QX4.
Motor output of axis 6 (single-axis robot)
Indicate the motor wattage of the single-axis robot
connected as axis 6 of the PX6/QX6.
The content of conforms to the same explanation for
axis 5. Leave the space blank for the PX4/QX4.
Dedicated network slot
Indicate an applicable network if you want to connect
the PX/QX to DeviceNet, CC-Link, ProfiBus or Ethernet.
Standard I/O (Slot 1)
Indicate the specification of the standard slot (slot 1).
Expansion I/O (Slots 2 to 4)
Indicate the specification of the expansion slots
(slots 2 to 4).
Take note that use of expansion slots will change the
external dimensions.
I/O flat cable length
Indicate the length of the signal wire connecting each
I/O board and the PLC.
* If you have selected “E (Not used)” for the standard and
expansion I/Os, “0 (None)” will be selected automatically.
Power-supply voltage
Indicate the voltage of the main controller power supply.
X-SEL PX/QX
➀
➁
➂
➃
➄
➅
➆
➇
➈
➉
Total output when maximum
number of axes are connected
Acceleration/deceleration
setting (*3)
Number of programs
(multitasking)
Operating
temperature/humidity
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
3. 2
System Configuration
Various Field
Network Connections
Motor Drive Power Supply
Three-phase 200VAC
Connectable Actuator
SCARA Robot
IX Series
(all types)
RB-RB
RB+
IN
RB-RB
Teaching Pendant PC Software
Model : IA-T-X (Standard)
IA-T-XD (With deadman switch)
IA-T-XA (ANSI/CE Mark compliant type)
This teaching device supports program/position
input, test operation, monitoring, etc.
* IA-T-X/XD of version 1.20 or older and IA-T-XA of
version 1.10 or older cannot be used with the PX/QX
controllers.
X-SEL PX/QX
Options
Model : REU-1
This unit converts to heat the regenerative current produced when the
motor decelerates.
The regeneration unit may be required depending on the total motor
output of single-axis robots connected to the controller (SCARA robots
do not require this unit).
Refer to the table shown to the right for a guideline on whether or not
the regeneration unit is required and if so, how many.
Model : IA-101-X-MW
With a PC link cable
(equipped with a D-sub, 9-pin
connector on the PC end)
For Windows 95, 98, NT, 2000
and ME
This software is a startup support tool
offering the functions needed to input
programs/positions and perform debugging.
* Version 5.0.1.0 or older programs cannot be
used with the PX/QX controllers.
Motor output Horizontal
0 ~ 100W
~ 200W
~ 400W
~ 600W
~ 800W
~ 1000W
~ 1200W
~ 1500W
application
Not required
Not required
Not required
1 unit
1 unit
1 unit
1 unit
2 units
2 units
1 unit
1 unit
1 unit
1 unit
2 units
2 units
3 units
ø5
RB-
RB+
RB IN
RB
RB
-
+
RB OUT
175
16.6 126
34
5
195
186
Regeneration Unit
IA-T-X/XD IA-T-XA
Vertical External Dimensions
application
High-speed, high-precision type
Standard type
Dustproof type
Cleanroom specification
Anti-electrostatic specification
Small type
Compact type
High-rigidity belt type
Slim belt type
Rotating axis
ROBO Cylinder
PLC, etc.
Teaching Pendant
Regeneration Unit
PC Software
Regeneration unit cable: 1m
(Supplied with regeneration unit)
Single-phase 200VAC
• Emergency stop
• Enable
• System ready
• I/O board
• Multipoint I/O board
I/O flat cable: 2m
(Supplied with the controller)
4m
RS232 cable: 5m
(Supplied with the PC software)
ISPA Series
ISA Series
ISDA Series
ISDACR Series
ISDACR ESD
DS/DSCR (T1) Series
SS/SSCR Series
IF Series
FS Series
RS Series
RCS-SS/SM
RCS-SSR/SMR
RCS-RA55/F55
RCS-RB7530/RB7535
RB+
OUT
External Equipment
• Device Net
• CC-Link
• ProfiBus
• Ethernet
Serial Communication Port
2 channels
(standard & RS232)
Control Power Supply
System I/O Expansion I/O
Power-Source Cutoff Circuit
(Provided by the customer)
* Applicable to the global type only (not required for the standard type).
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
4. Catalog No.:CJ0091-Mar.0106-1
External Dimensions
The external dimensions of X-SEL PX/QX controllers vary depending on the type (arm length) of connected SCARA robot, number of connected
axes, use/non-use of expansion I/O, and types of direct-coupled axes. In the table below, select the controller specification meeting your specific
requirements and refer to the drawing of the corresponding number.
SCARA Controller
Type Arm length
Large-capacity type (PX) Large-capacity global type (QX)
SCARA only (PX4) SCARA only (QX4)
SCARA + direct-coupled axis(es)(PX5/PX6) SCARA + direct-coupled axis(es)(QX5/QX6)
Without expansion I/O With expansion I/O Without expansion I/O Without expansion I/O Without expansion I/O
Standard type
Cleanroom type
Wall mount type
Ceiling mount type
High-speed type
120
150
250
350
500
600
700
800
500
600
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions (*2) (*3)
External
dimensions
External
dimensions
External
dimensions
External
dimensions
(*5)
External
dimensions
(*5)
(*1)
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
- -
External
dimensions
External
dimensions
(*4)
External
dimensions
- -
(*1) If the direct-coupled axis has a brake or is of absolute encoder specification, refer to external dimensions .
(*2) If the direct-coupled axis has a brake or is of absolute encoder specification, refer to external dimensions .
(*3) If the direct-coupled axis has a brake or is of absolute encoder specification, refer to external dimensions .
(*4) If the direct-coupled axis has a brake or is of absolute encoder specification, refer to external dimensions .
(*5) Due to the large motor wattage of the SCARA robot, the external dimensions of a 6-axis configuration apply even when only four axes are connected.
249
265
195
186
180
49.5 75 75 49.5
5
3-ø5
269
285
195
186
180
59.5 75 75 59.5
5
3-ø5
322
338
195
186
180
41 120 120 41
5
3-ø5
342
358
195
186
180
51 120 120 51
5
3-ø5
3-ø5
22 120 120 22
284
300
5
42 120 120 42
324
340
5
3-ø5
58.5 120 120 58.5
357
373
5
3-ø5
78.5 120 120 78.5
397
413
5
3-ø5
3-ø5
28 75 75 28
206
222
5
38 75 75 38
226
242
5
3-ø5
64.5 75 75 64.5
279
295
5
3-ø5
3-ø5
29.5 120 120 29.5
299
315
5
45.5 75 75 45.5
241
257
5
3-ø5
3-ø5
20.5 120 120 20.5
281
297
5
37 120 120 37
314
330
5
3-ø5
57 120 120 57
354
370
5
3-ø5
125.3
(80)
3
Large-capacity type (PX)
SCARA only (PX4)
Without expansion I/O
SCARA + direct-coupled axis(es)(PX5/PX6)
Large-capacity global type (QX)
SCARA only (QX4) SCARA + direct-coupled axis(es)(QX5/QX6) Side view (common)
* All controller types have the same height.
With expansion I/O With expansion I/O With expansion I/O
(*5) (*5)
With expansion I/O
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
External
dimensions
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com