The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Small Hydro power plant. Small Hydro Power (SHP) is hydro plant with power under 10 MW as defined by United Nations Industrial Development Organization (UNIDO):
Choice of technology and site
Small hydro technology is mature and well-established in the market
Improvements: equipment designs, differents materials, control sistem
Typologies of Hydropower plants
a) Run of River Plants
b) Pondage Plants
c) Reservoir Plants
Typologies of Hydropower plants
a) Run of River Plants
A Run of River plant uses the available river flow
A Run of River plant has a little cumulative water
High cost
Typologies of Hydropower plants
b) Pondage Plants
Cumulative water flows permits storage of water for few weeks
Pondage Plant can works when the level of river is low.
Typology of hydropower plants
c) Reservoir Plants
Energy prodution of a Reservoir Plant is based on cumulative water flows
Construction of a very large dam to cumulate water
Usually this kind of plant is not a SHP
Plan SHP
Control national and regional law
Who using the water and how
Story analisis of river flow
Study hidrogeologic and hidrografic of site
Chek principal parameters (Q) river flow avieble and (H) head for calculate power of site
Pubblicity of project and consalting citizen.
Hydroelectric plants
Start easily and quickly and change power output rapidly
Complement large thermal plants (coal and nuclear), which are most efficient in serving base power loads.
Save millions of barrels of oil
SHP emissions
As all other renewable energy sources, SHP plays an important role in reducing the emissions.
Externality of SHP are very low.
This is very important and positive, expecially for Kyoto protocol.
What to do for goal with SHP
Act cordinated strategy:
Informing
Including the people in the projects
Dialogue with opponents
Implementing social compain
Micro hydro power background concepts, including general electric energy production, large scale hydroelectric production, small scale and run of the river micro hydro, pelton wheels, classifications, case studies, etc.
Performance Evaluation of Small Hydro Power PlantGirish Gupta
This is a project on the study of small hydro power plant of Khairana, Ramgarh, Uttrakhand which is of the capacity 100 KW. This project is done under Center of Excellence, Technical Educational Quality Improvement Programme - II (COE, TEQIP-II) funded by Ministry of Human Resource and Developement, Government of India
Design and Construction of a 0.75KVA Inverter Power Supply for Nigerian Homes...ijtsrd
Over the years, there have been a gradual increase in the electricity generation capacity of Nigeria, with more gas power plants installed between 1999 2003 to augment power supply from the existing hydro and thermal power plants installed in the 1970s but despite gradual increase in Mega Watts MW of electric power generated, Nigerian electricity consumers continue to experience epileptic and unreliable power supply distribution. As at today, the power distribution companies referred to as the DISCOs supply epileptic or skeletal power to their customers which they termed 'load shading’. This term explains a situation whereby a power consumer or customer can obtain a power ration for some hours in the day and do not have power remaining hours in the day. Because of this, many consumers depend on generating sets as alternative source of power. This is inefficient and costly to maintain. Today it is possible to introduce the electric power inverter which converts battery DC voltage to AC voltage. Inside the inverter can be coupled an electric charging system which can charge the battery when there is power supply from utility power source. When this power source fails, the battery in turn supplies the inverter with DC which is being converted to A.C sometimes the inverter can also be connected to renewable energy source like solar, wind etc. These sources ensures an all round supply of DC for the inverter. Renewable energy can be particularly suitable for developing countries such as Nigeria where public power supply is totally unreliable. In response to the yearning of the majority of Nigerians for a steady power supply, this research paper tries to contribute in a little way by designing and constructing a 0.75KVA inverter to power homes and offices. The paper starts by defining what an inverter is, reviewed similar past works in literature, and it explained the principles of operation and components used with its circuit diagram. The completed work was tested and met its design specifications. Lois O. Nwobodo | Nkemdilim Ifeyinwa Obiokafor | Samuel C. Asogwa | Fidelis C. Obodoeze "Design and Construction of a 0.75KVA Inverter Power Supply for Nigerian Homes and Offices" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38533.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/38533/design-and-construction-of-a-075kva-inverter-power-supply-for-nigerian-homes-and-offices/lois-o-nwobodo
Small Hydro power plant. Small Hydro Power (SHP) is hydro plant with power under 10 MW as defined by United Nations Industrial Development Organization (UNIDO):
Choice of technology and site
Small hydro technology is mature and well-established in the market
Improvements: equipment designs, differents materials, control sistem
Typologies of Hydropower plants
a) Run of River Plants
b) Pondage Plants
c) Reservoir Plants
Typologies of Hydropower plants
a) Run of River Plants
A Run of River plant uses the available river flow
A Run of River plant has a little cumulative water
High cost
Typologies of Hydropower plants
b) Pondage Plants
Cumulative water flows permits storage of water for few weeks
Pondage Plant can works when the level of river is low.
Typology of hydropower plants
c) Reservoir Plants
Energy prodution of a Reservoir Plant is based on cumulative water flows
Construction of a very large dam to cumulate water
Usually this kind of plant is not a SHP
Plan SHP
Control national and regional law
Who using the water and how
Story analisis of river flow
Study hidrogeologic and hidrografic of site
Chek principal parameters (Q) river flow avieble and (H) head for calculate power of site
Pubblicity of project and consalting citizen.
Hydroelectric plants
Start easily and quickly and change power output rapidly
Complement large thermal plants (coal and nuclear), which are most efficient in serving base power loads.
Save millions of barrels of oil
SHP emissions
As all other renewable energy sources, SHP plays an important role in reducing the emissions.
Externality of SHP are very low.
This is very important and positive, expecially for Kyoto protocol.
What to do for goal with SHP
Act cordinated strategy:
Informing
Including the people in the projects
Dialogue with opponents
Implementing social compain
Micro hydro power background concepts, including general electric energy production, large scale hydroelectric production, small scale and run of the river micro hydro, pelton wheels, classifications, case studies, etc.
Performance Evaluation of Small Hydro Power PlantGirish Gupta
This is a project on the study of small hydro power plant of Khairana, Ramgarh, Uttrakhand which is of the capacity 100 KW. This project is done under Center of Excellence, Technical Educational Quality Improvement Programme - II (COE, TEQIP-II) funded by Ministry of Human Resource and Developement, Government of India
Design and Construction of a 0.75KVA Inverter Power Supply for Nigerian Homes...ijtsrd
Over the years, there have been a gradual increase in the electricity generation capacity of Nigeria, with more gas power plants installed between 1999 2003 to augment power supply from the existing hydro and thermal power plants installed in the 1970s but despite gradual increase in Mega Watts MW of electric power generated, Nigerian electricity consumers continue to experience epileptic and unreliable power supply distribution. As at today, the power distribution companies referred to as the DISCOs supply epileptic or skeletal power to their customers which they termed 'load shading’. This term explains a situation whereby a power consumer or customer can obtain a power ration for some hours in the day and do not have power remaining hours in the day. Because of this, many consumers depend on generating sets as alternative source of power. This is inefficient and costly to maintain. Today it is possible to introduce the electric power inverter which converts battery DC voltage to AC voltage. Inside the inverter can be coupled an electric charging system which can charge the battery when there is power supply from utility power source. When this power source fails, the battery in turn supplies the inverter with DC which is being converted to A.C sometimes the inverter can also be connected to renewable energy source like solar, wind etc. These sources ensures an all round supply of DC for the inverter. Renewable energy can be particularly suitable for developing countries such as Nigeria where public power supply is totally unreliable. In response to the yearning of the majority of Nigerians for a steady power supply, this research paper tries to contribute in a little way by designing and constructing a 0.75KVA inverter to power homes and offices. The paper starts by defining what an inverter is, reviewed similar past works in literature, and it explained the principles of operation and components used with its circuit diagram. The completed work was tested and met its design specifications. Lois O. Nwobodo | Nkemdilim Ifeyinwa Obiokafor | Samuel C. Asogwa | Fidelis C. Obodoeze "Design and Construction of a 0.75KVA Inverter Power Supply for Nigerian Homes and Offices" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38533.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/38533/design-and-construction-of-a-075kva-inverter-power-supply-for-nigerian-homes-and-offices/lois-o-nwobodo
COST ESTIMATION OF SMALL HYDRO POWER GENERATIONRajeev Kumar
R. Montanari [4] in his paper presents an original method for finding the most economically advantageous choice for the installation of micro hydroelectric plants. More precisely, the paper that follows is to be considered in a context defined as “problematic” by those who have the job of constructing water-flow plants with only small head and modest flow rates. Traditional plant solutions using Kaplan or Francis type turbines must be rejected because of the high levels of initial investments. Much more simple configurations must be analyzed, such as plants with propeller turbines or Michel–Banki turbines, in order to reduce the investment costs. The general methodology applied provides a powerful decision-making instrument which is able to define the best plant configuration. The method is based on the use of economic profitability indicators, such as the Net Present Value (NPV), calculated using the plant project parameters, the nominal flow rate and head, and the particular hydrologic characteristics of the site, such as the type of distribution, the average value and the standard deviation of the flow rates in the course of water supplying the plant
S.M.H. Hosseinia, F. Forouzbakhshb, M. Rahimpoor [6] in their paper a method to calculate the annual energy has presented, as is the program developed using Excel software. This program analyzes and estimates the most important economic indices of a small hydro power plant using the sensitivity analysis method. Another program, developed by Mat lab software, calculates the reliability indices for a number of units of a small hydro power plant with a specified load duration curve using the Monte Carlo method. Ultimately, comparing the technical, economic and reliability indices will determine the optimal installation capacity of a small hydro power plant.
S.K. Singal and R.P.Saini [9] has presented methodology to determine the correlations for the cost of different components of canal based small hydro power schemes. The cost based on the developed correlations, having different head and capacity, has been compared with the available cost data of the existing hydropower stations. It has been found that these correlations can be used reasonably for the estimation of cost of new canal-based SHP schemes.
This application note introduces the theory and technology behind small hydroelectric power (SHP) stations (defined as units below 10 MW). The note gives a detailed discussion of the basics of SHP, the types of equipment, turbines and generators in use, the selection and assessment of suitable sites, planning and licensing requirements, financing, and economic justification. It includes a decision-making checklist and covers the environmental aspects and requirements for small hydroelectric projects, such as the provision of fish bypasses.
The proposed system converts energy from moving wat er into electricity. It is a simple system which is driven by water. The prime mover of the sy stem is interfaced to turbine which is in turn driven by water. The system consists of a permanent magnet based low rpm generator,turbine,Charger,Storage unit. The potential energy of the water is converted into mechanical energy by turbine which is in turn converted to electrical en ergy by generator. The proposed system enables any house old to drive lights,Television &Mixer (500 Watts) kind of loads.
Rural electrification by Lakshmi.Nidoni-seminar pptlakshmi nidoni
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
The International Journal of Engineering and Science (IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Rural electrification by Lakshmi.Nidoni-Seminar report finallakshmi nidoni
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
A Brief Survey on Robust Video Watermarking Techniquestheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Tensile test of a strand with 2 broken wires artificially damaged and life pr...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
COST ESTIMATION OF SMALL HYDRO POWER GENERATIONRajeev Kumar
R. Montanari [4] in his paper presents an original method for finding the most economically advantageous choice for the installation of micro hydroelectric plants. More precisely, the paper that follows is to be considered in a context defined as “problematic” by those who have the job of constructing water-flow plants with only small head and modest flow rates. Traditional plant solutions using Kaplan or Francis type turbines must be rejected because of the high levels of initial investments. Much more simple configurations must be analyzed, such as plants with propeller turbines or Michel–Banki turbines, in order to reduce the investment costs. The general methodology applied provides a powerful decision-making instrument which is able to define the best plant configuration. The method is based on the use of economic profitability indicators, such as the Net Present Value (NPV), calculated using the plant project parameters, the nominal flow rate and head, and the particular hydrologic characteristics of the site, such as the type of distribution, the average value and the standard deviation of the flow rates in the course of water supplying the plant
S.M.H. Hosseinia, F. Forouzbakhshb, M. Rahimpoor [6] in their paper a method to calculate the annual energy has presented, as is the program developed using Excel software. This program analyzes and estimates the most important economic indices of a small hydro power plant using the sensitivity analysis method. Another program, developed by Mat lab software, calculates the reliability indices for a number of units of a small hydro power plant with a specified load duration curve using the Monte Carlo method. Ultimately, comparing the technical, economic and reliability indices will determine the optimal installation capacity of a small hydro power plant.
S.K. Singal and R.P.Saini [9] has presented methodology to determine the correlations for the cost of different components of canal based small hydro power schemes. The cost based on the developed correlations, having different head and capacity, has been compared with the available cost data of the existing hydropower stations. It has been found that these correlations can be used reasonably for the estimation of cost of new canal-based SHP schemes.
This application note introduces the theory and technology behind small hydroelectric power (SHP) stations (defined as units below 10 MW). The note gives a detailed discussion of the basics of SHP, the types of equipment, turbines and generators in use, the selection and assessment of suitable sites, planning and licensing requirements, financing, and economic justification. It includes a decision-making checklist and covers the environmental aspects and requirements for small hydroelectric projects, such as the provision of fish bypasses.
The proposed system converts energy from moving wat er into electricity. It is a simple system which is driven by water. The prime mover of the sy stem is interfaced to turbine which is in turn driven by water. The system consists of a permanent magnet based low rpm generator,turbine,Charger,Storage unit. The potential energy of the water is converted into mechanical energy by turbine which is in turn converted to electrical en ergy by generator. The proposed system enables any house old to drive lights,Television &Mixer (500 Watts) kind of loads.
Rural electrification by Lakshmi.Nidoni-seminar pptlakshmi nidoni
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
The International Journal of Engineering and Science (IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Rural electrification by Lakshmi.Nidoni-Seminar report finallakshmi nidoni
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
A Brief Survey on Robust Video Watermarking Techniquestheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Tensile test of a strand with 2 broken wires artificially damaged and life pr...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Microbiological Quality of Malaysian Heritage Food ('Satar') Sold In Marang a...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Particle Swarm Optimization based Network Reconfiguration in Distribution Sys...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Highway Surface Drainage System & Problems of Water Logging In Road Sectiontheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Studies on Material and Mechanical Properties of Natural Fiber Reinforced Com...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Metsulfuron Methyl - Effect On Soil Microfloratheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation.
Model-Driven Context-Aware Approach to Software Configuration Management: A F...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Impact of Ethoxysulfuron on Lemna gibba L. and Recovery from Damage after Pro...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Mechanical behavior and statistical study of aluminum wires belonging to low ...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Study of Damage to ABS Specimens Submitted To Uniaxial Loadingtheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation.
Single Machine Power Network Load Frequency Control Using T-S Fuzzy Based Rob...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Study on Processing and Mechanical Properties of nano SiCp reinforced AA7075theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Thermo luminescence Dating of Quartz Sediments Extracted from the Terraces of...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Forecasting Wheat Price Using Backpropagation And NARX Neural Networktheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
Design and Implementation of monitoring LAN user wirelessly by Android mobile...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Studies on Small Hydro-Power Potentials of Itapaji Dam in Ekiti State, Nigeria.inventionjournals
Lack of constant electricity supply with the use of convectional mode are major causes of poverty in many rural areas in Nigeria. An overview of small hydro power potentials in Nigeria to mitigate against the problem of constant electricity supply in rural areas is discussed with surveyed states and expected total generation. A study on the potentials of Itapaji dam in Ekiti state, Nigeria for small hydro power generation is presented. The maximum annual discharge of the dam was calculated as 23.24 cubic metre/sec, with an average nominal flow discharge of 8.33cubic metre/sec, and an average minimal flow of 1.78 cubic metre/sec, while the estimated hydro power potential of the dam is about 1.30MW, being generated with an average annual mean discharge of 8.33m3 /sec with a reservoir capacity balance of 1.922 x 109m3 /year. The components required for small hydro power scheme was discussed for familiarization as well as an assessment of the environmental impact for overall viability. Electricity generation from this hydro scheme can easily be extended to surrounding communities along the present gridline without any major engineering effort, as well as a reduction in green-house gas emission in terms of avoided fossil fuels backed generating schemes.
this presentation explores hydro power
different types ,its uses,where it has been used,how it is used,its advantages and disadvantages,and one model created by us using sustainable materials.
Multi turbine micro hydro power generationIjrdt Journal
Increase in human population has increased the demand for energy. Fossil fuels are the major source to meet the world energy requirements, but its rapidly dwindling supply and its adverse effects on our ecological system are of major concern. In India over 70 % of the electricity generated is from coal based power plants. Other renewable such as wind, geothermal, solar, and hydroelectricity represent a 2% share of the Indian fuel mix. Fossil fuels (coal) are a major source of power production in India. Our concept features the run of river active setup of micro hydro power generation using simple gear mechanism. This concept is based on the collection of mechanical energy from two rotors spinning by the effect of higher river velocity and transmission of power from the rotors to a small pinion gear which runs the generator shaft, through two large driver gears attached to the shafts of two rotors. This method of power production is comparatively simpler than others. The objectives of our project include low cost, higher output, environment friendly power production, multiple setups in one row, and decrease the power shortage in India.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
When stars align: studies in data quality, knowledge graphs, and machine lear...
Modelling Of Underground Cables for High Voltage Transmission
1. The International Journal Of Engineering And Science (IJES)
|| Volume || 3 || Issue || 12 || December - 2014 || Pages || 57-67||
ISSN (e): 2319 – 1813 ISSN (p): 2319 – 1805
www.theijes.com The IJES Page 57
Modelling Of Underground Cables for High Voltage
Transmission
1,
Omorogiuwa Eseosa , 2,
Obi Patrick. I
1,
Department of Electrical/Electronic Engineering College of Engineering, University of Port Harcourt
2,
Department of Electrical/Electronic Engineering Anambra State University, .Anambra
--------------------------------------------------ABSTRACT--------------------------------------------------------
The high failure rates and economic implications of regularly maintaining Overhead lines hasnecessitated the
need for using Underground Cable system. This paper covers the current carrying capacity of underground
cables under three states namely, the steady, transient and short circuit states. Also covered is the reactive
power generated in underground cables during operation.
---------------------------------------------------------------------------------------------------------------------------------------
Date of Submission: 07 November 2014 Date of Accepted: 15 December 2014
---------------------------------------------------------------------------------------------------------------------------------------
I INTRODUCTION
A Micro-hydro means a plant of small power, having about 100 kW. The Micro-hydro power plants represent
lately, one one the way out to clean energy generation, due to the following advantages: Require water sources
of low flow and fall; Don’t need big investments; Are environment friendly from the equipment point of view;
Are very useful for isolated areas; Can autonomously function; Can be easily used by anybody. In this work,
the design of a micro-hydro power plant with robust governor for improve system performance is considered.
All over Nigeria, there are many rivers both large and small (hydropower potential sites) and around some of
them little communities with no electricity because they are too isolated to be connected to the electricity grid
(network). Nigeria has not being able to exploit her small rivers hydropower potential site because of the none
availability of suitable hydro plant capable of utilizing low water head and flow from small rivers to generate
power (Prof. O.O. Adewoye 2009), but has only partially succeeded in exploiting her large rivers hydropower
potential sites, by building large scale hydroelectric power plant (e.g. Kainji hydropower plant, Jebba
hydropower plant, Shiroro hydropower plant) to generate huge amounts of power from water stored behind
massive dams. According to the international energy agency (IEA), large-scale hydroelectric plants currently
supply 29% of Nigeria electricity supply. However, such kind of projects requires tremendous amounts of land
for impoundment, relocation of people from the land and flood-control, and often they produce many
environmental impacts despite their emission-free electricity production. One main problem of hydropower
electricity is to keep the constant frequency value (the constant speed value) because these plants are affected by
change in the regime of river. In a power system operation such as hydro electricity plants, system frequency
varies depending on the difference between demand , therefore generated power load-frequency control is very
important for supplying efficiently electrical power of good quality, as the consumers want continuous, stabile,
quality and reliable power at rated frequency and voltage . For a power system to be term reliable, constant
frequency value must be provided against the varying load value. Hence this project aims to design a reliable
hydroelectric power plant that is devoid of the problem associated with large scale hydro plant, and capable of
utilizing the smaller rivers in Nigeria to generate electricity.
II DESIGN OBJECTIVE
To design an hydroelectric power plant that does not require:-
A large water reservoir or Dam
Relocation of people from there land and need for flood control
Connection to the power grid to supply electricity, (hence it can serve remotely located community.)
To design an hydroelectric power plant capable of utilizing low water head and flow from small rivers
to generate power
To design an hydroelectric power plant capable of providing constant frequency value against the
varying load value.
This design will help in providing guide for the construction of suitable hydroelectric plant capable of utilizing
low water head and flow from small rivers to generate power, hence enabling the country to start exploiting her
small hydro potential sites. The construction of hydroelectric power plant in the country that is truly
2. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 58
environment friendly is achieved via better power load-frequency control on hydroelectric power plant in the
country and beyond.
III DESIGN METHODOLOGY:
In this work, micro-hydro power plant, consisting of five elements: water tank and valve, supply
pipe, chain type hydro turbine, generator and controller is considered. The work presents a systemic
approach on Micro-hydro plant, starting with the achievement of block diagram with one control closed loops.
Discussion /analysis, as well as modeling and simulation of the electro mechanical part (hydro turbine,
generator) was considered. The results of this work prove the correctness of this design that could be used in
practical applications. The design is limited to hydro electric power plant for use in run-of-river’ scheme and
only the electro-mechanical components of the plant (i.e. the turbine–generator) and the Controller (i.e. the
governor)
IV LITERATURE REVIEW
Hydropower is a renewable, non-polluting and environmentally benign source of energy. Hydropower is based
on simple concepts. Moving water turns a turbine, the turbine spins a generator, and electricity is produced.
Many other components may be in a system, but it all begins with the energy in the moving water. The use of
water falling through a height has been utilized as a source of energy since a long time. (Dilip Singh 2009) It is
perhaps the oldest renewable energy technique known to the mankind for mechanical energy conversion as well
as electricity generation. In the ancient times waterwheels were used extensively, but it was only at the
beginning of the 19th Century with the invention of the hydro turbines that the use of hydropower got
popularized. Hydropower was the most common way of electricity generating in the early 20th century.
The first commercial use of hydroelectric power to produce electricity was a waterwheel on the Fox River in
Wisconsin in 1882 that supplied power for lighting to two paper mills and a house. Within a matter of weeks of
this installation, a power plant was also put into commercial service at Minneapolis. India has a century old
history of hydropower and the beginning was from small hydro. The first hydro power plant was of 130 kW set
up in Darjeeling during 1897, marked the development of hydropower in the country. Similarly, by 1924
Switzerland had nearly 7000 hydropower stations in use. Even today, Small hydro is the largest contributor of
electricity from renewable energy sources, both at European and world level. With the advancement of
technology, and increasing requirement of electricity, the thrust of electricity generation was shifted to large size
hydro and thermal power stations. However, it is only during the last two decades that there is a renewed interest
in the development of l hydro power projects mainly due to its benefits particularly concerning environment and
ability to produce power in remote areas. Small hydro projects are economically viable and have relatively short
gestation period. The major constraints associated with large hydro projects are usually not encountered in small
hydro projects. Renewed interest in the technology of small scale hydropower actually started in China which
has more than 85,000 electricity producing, hydropower plants. Hydropower will continue to play important role
throughout the 21st Century, in world electricity supply. Hydropower development does have some challenges
besides the technical, economic and environmental advantages it shares above other power generation (fossil
fuel based) technologies. At the beginning of the new Millennium hydropower provided almost 20% (2600
TWh/year) of the electricity world consumption (12900 TWh/year). It plays a major role in several countries.
According to a study of hydropower resources in 175 countries, more than 150 have hydropower resources. For
65 of them, hydro produces more than 50% of electricity; for 24, more than 90% and 10 countries have almost
all their electricity requirements met through hydropower. Hydroelectricity is the term referring
to electricity generated by hydropower; the production of electrical power through the use of the gravitational
force of falling or flowing water. It is the most widely used form of renewable energy. (Wikipedia.com, 2011)
Hydropower is energy from water sources such as the ocean, rivers and waterfalls. Water from the reservoir
flows due to gravity to drive the turbine connected to a generator. Power generated is transmitted over power
lines. Water turbine considered the energy of flowing or falling water into mechanical energy and drives a
generator, which generates electrical power. A control mechanism to provide stable electrical power known as
the governor delivers the power (Bhatti, T.S., Bansal, R.C. and Kothari, D.P 2004).
Hydropower converts the energy in flowing water into electricity. The quantity of electricity generated is
determined by the volume of water flow and the height of "head" (the height from turbines in the power plant to
the water surface) created by the dam. The greater the flow and head, the more electricity produced. A typical
hydropower plant includes a dam, reservoir, penstocks (pipes), a powerhouse and an electrical power substation.
The dam stores water and creates the head; penstocks carry water from the reservoir to turbines inside the
3. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 59
powerhouse; the water rotates the turbines, which drive generators that produce electricity (Working Group on
Prime Movers 1992).
TYPES OF HYDRO POWER PLANT AND CLASSIFICATIONS
(Venkateswaran R. 2003) Hydropower is classified as follow:
• Upto 100KW – Micro Hydro Power
• 101Kw to 2000Kw – Mini Hydro Power
• 2001Kw to 25000Kw – Small Hydro Power
Classifications Based on Head
• Ultra Low Head – Below 3 meters
• Low Head – Less than 40 meters
• Medium/High Head – Above 40 meter
(Dilip Singh 2009)Though different countries have different criteria to classify hydro power plants, a general
classification of hydro power plants is as follows:
Current Carrying Capacity Of Cables: Ampacity in an underground cable system is the capacity of the
installation to extract heat from the cable and dissipate it in the surrounding soil and environment. The maximum
operating temperature of cables is a function of the damage the insulation can suffer as a result of high operating
temperatures. There are three standardized ampacity ratings namely: steady state, transient (or emergency) state,
and short circuit state. In computing the ampacity of cables, both numerical and analytical methods are used. The
numerical approach is mainly based on finite differences of finite elements technique. The finite elements
technique is better suited for cable Ampacity because of the round geometry of the cables. The two major
international standards organizations, the IEEE and the IEC both adopt the analytical method as the basis for their
standards. In an underground cable system, the main heat transfer mechanism is by conduction with the exception
of the air in the conduit in the duct banks or buried duct installations. The different Ampacity ratings conditions
are considered in the cause of the research.
STEADY STATE AMPACITY RATINGS
The flow of current is usually accompanied by the production of heat. The heat sources in cable installations can
be divided into two generic groups. They are the heat generated in conductors and the heat generated in
insulators. The losses in the conductor element are by far the most significant losses and are caused by :a) Joule
losses due to impressed current, circulating current or induced (eddy current) losses.b) Hysteresis losses in
conductors which are also magnetic. The metallic components of an underground cable that produce heat are the
core conductors, sheaths, concentric neutrals, Armours, Skid wires and pipes or ducts. The losses in these
components are functions of the frequency f, and the temperature of operation and it is proportional to the square
of the applied current. This dependence on frequency and temperature is included in an equivalent AC resistance
to express Joule’s law as
W = Rac( f , t ) I2
(1)
Where W represents heat loss through conductor,Racis the equivalent AC resistance(Ω),f is frequency(Hz), t is
the time in seconds,I represents the current in amperes. Heat is also produced in the insulating material. This
heat produced in the insulating layer is only important under certain high voltage conditions. The loss
relationship is given by Wd = GdV2
= CV2
tan ( ).Where Wd represents heat loss through the
insulation,Gdrepresents geometrical factor of dielectric used. C is the capacitance, V represents voltage
applied, is loss angle. The ampacity calculations under steady state condition is computed using the
Neher-McGrath. This is based on a thermal – electrical analogy method due to Pashkis and baker (1942). The
basic idea is to subdivide the study area into layers. Then one substitutes the heat sources for current sources, the
thermal resistances for electrical resistances and thermal capacitance for electrical capacitance. It is worthy of
note that capacitance has no part in steady state analysis between layers. Thus, the potential difference between
the terminals of the circuits and the innermost current source represents the temperature rise of the core of the
cable with respect to the ambient temperature. Therefore, the temperature of the cable’s core is the ambient
temperature plus change in temperature. These details are represented below:
c - a = Wc(T1 + T2 + T3 ) + Wd ( ½ T1 + T3 + T4 ) + Ws ( T3 + T4 ) (2)
∆Wc( T1+ ( 1 + ) ( T3 + T4 )) + Wd ( ½ T1 + T3 + T4 ) (3)
where c represents the Maximum operating Temperature 0
K
a represents the Ambient temperature 0
K
Wc represents the heat loss of conductor (I2
Rac )
Wd represents the Dielectric losses W/m
Ws represents the Sheath loss W/m
T1 ,T3and T4 represents the thermal resistances of Insulation, Sheath and Oil (
o
Km/W) respectively
4. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 60
In order to derive an expression from which the Ampacity can be computed directly, the heat sources (electrical losses )
W’s are expressed as a proportion of the conductor losses ( Wc). The conductor lossesare computed using the ac
resistance and the current. By substituting the following expressions, we have:Ws= Wc,Wc = RacI2
.Where λ
1
is Sheath
loss factor
For the purpose of simplicity
Let X=( T1 + ( 1 + (T3 + T4));Y=( ½ T1 + T3 + T4 ),
W =Wd,Rac = RacI = (4)
From equation (4), we can compute theampacityof an underground cable under steady state condition. Of paramount
importance for cable rating is the accurate calculation of the thermal resistance T, the loss factor and the AC
resistance Racof the cable core. The loss factors takes into account the eddy losses induced and the circulating
currents, while Racconsiders the temperature dependency of the resistances.
CALCULATION OF THERMAL RESISTANCES
The Thermal Resistivity of the Insulation, the protective covering and the surrounding soil (serving and bedding ) must
be calculated accurately:
Cable Insulation: A careful look at the cross section of the cable, the internal layers have tubular geometries. Therefore
the thermal resistance of the insulation T1 is given as
T1 = In [ π (5)
Where T1 = Thermal Resistance of the Insulation,g1= Thermal resistivity of the Insulation = Radius of Sheath; r =
Radius of conductor. For a multi core cable, the calculation of the thermal resistance is quite difficult due to its
complex thermal field.
b) Protective Covering: The protective covering is also cylindrical in shape. It therefore follows that the
thermal resistance will be similar to that of the insulation. The armour thickness is generally very small and can
be neglected. Thus the thermal resistance of the protective covering is given as:
T(2,3) = In [ (6)
Where T(2,3) = thermal Resistance of the protective covering, g2 = Thermal resistivity of the bedding and
serving,R1 = Radius over the Sheath,R2 = external radius of the cable,
c) Surrounding Soil: The heat conducted through the cable is passed into the soil. For an underground cable
with external radius R, buried a distance h metres below the ground surface in a soil of constant thermal
resistivity T4 in 0
C/watt. The thermal resistance of Soil is T4 and is given by
T4 = In [ (7)
Where T4 =Thermal Resistance of the surrounding soil g3 = Thermal resistivity of soil in 0
C/watt,h =depth of
cable in the ground,R2 =external radius of the cable.From the above equation, it is evident that the depth of
laying of cable affects the Ampacity of an electric cable. Deeper laying means an increased thermal resistance of
the soil (to the surface) hence the cable is de-rated.
CALCULATION OF LOSS FACTOR
Loss factor in equations6 and 7 relates the losses that metallic layer such as Sheath, armour etc produce in
proportion to the Cable core. These losses are due to induced (eddy’s) current and circulating currents. The
geometrical arrangements are diverse and some are quite complicated. The bonding used for the Sheaths plays a
vital role in the current intensity that circulates in them. Thus the losses are very much dependent on the
bonding type and the geometrical arrangement of the cables (flat or triangular).A cable has a capacitance
between the core and the sheath. When a voltage is applied to an unloaded cable, a capacitive current (or
charging current) flows. Since the resistivity of the insulation is not infinite, leakage current flows and a power
loss occurs. With ac voltages, the phenomenon of dielectric absorption also contributes to the power loss. Thus,
a cable acts as an imperfect capacitor and the total current, under loaded conditions, leads the voltage by an
angle of (90 – δ). The angle δ is termed the loss angle of the dielectric. The dielectric loss Pd is
Pd = VI cos φ = VI sin δ = CV2
sin
Where C = capacitanceV= line to neutral voltage, angular velocity,frequency=2 f=100
A.C RESISTANCE
5. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 61
The operating resistance of a cable is a function of the temperature and the frequency. The temperature variation
is described by:R(t) = R0 [ 1 + ά ( t – t0)] (9)
Where :R0 = Resistance at a base temperature ( t0 = 200
C )
ά=Coefficient of variation with temperature.Although there exists an analytical expression using Bessel function
for modelling of eddy current at low frequencies ( 50 Hz), these are very simple and accurate formulas adequate
for ampacity calculations. The eddy’s current effects are included by two factors. One considers the skin effect
(ys) and the other, the proximity effect (yp). The mathematical expression to account for these losses is:
R(f) = Rdc (1+ ys + yp ) (10)
Combining both equations (9 and 10),
Rac( t, f ) = R0 [1 + ά ( t – t0)]( 1+ ys + yp) (11)
The values ys and yp are computed from simplified analytical expression particular to each cable core
construction (solid, stranded segmented, etc).
Considering a 362kV, 10 km long, 3-core aluminium conductor with XLPE insulation laid in direct burial
method at a depth of 1.3m below the ground with the following data:
Laying Condition: 3 foil formation, Direct burial method.
Cable depth in ground = 1.3m, Soil thermal resistivity = 1.2k.m/W,Soil temperature (ambient) = 200
C
Nominal sectional area = 1600mm2
(segmental stranded),Conductor diameter = 48.9mm,Thickness of Insulation
= 22.4mm,DC resistance of the conductor core at 200
C = 0.0186Ω/km,Sectional area of aluminium screen =
290mm2
,Outside diameter of cable = 120mm,Increase in resistance due to skin effect = 3.5 per cent
Increase in resistance due to proximity effect = 3.5% Resistivity of aluminium at 200
C =0.02826 x 10-6
Ω/m
Temperature coefficient of resistance = 0.004per0
C
Increase in resistance due to stranding and laying =2% Sheath loss = 10% of conductor loss.
Computing the steady state Ampacity rating using the above data is carried out as follows: Conductor
resistance= =1.766 x 10-5
ohm/m. Allowing for increase in resistance due to stranding
and laying; Rdc at 200
C = 1.02 x1.02 x 1.766 x 10-5
= 1.83735 x 10-5
ohm/m, Rdc at 900
C = 2.3518 x 10-5
ohm/m.
Allowing for increase in resistance due to proximity effect and skin effect; Rac = 1.035 x 1.035 x 2.3518 x 10-
5
.Total insulation thickness = 22.4mm.
Ratio of total insulation thickness to core diameter = = 0.458.Thermal
resistance per core per metre = 0.65 ohm/m.
Therefore for a 3-core cable, Thermal resistance (T1) = = 0.217
ohm/m.
T2,3 = In = 44.2393 In (1.0435) = 1.8828 ohm/m.
Soil thermal resistance (T4) = In = 0.15913 In 43.3 = 0.5993ohm/m.
Wd = dielectric loss is derived
from the equation:
Wd = 3 (Vo)2
C tan δ,V0 is the operating voltage to neutral = 362,000 / = 209,000 V =
209kV,f = 100 C = = (2
r
0/In x L),R = (11.2 x 10-3
) + (24.45 x 10-3
) = 0.0112 + 0.02445 =
0.0357,R = 24.45mm = 0.02445m
Therefore C = = = 14.553 x 10-15
F
tanδ= dielectric loss factor = 0.004
Applying equation 9,
I Wd = 3 x (209000)2
x 100π x 14.553x10-14
x0.004=0.0024=
I = = 981.7269 [A].
Therefore the steady state Ampacity rating for the cable is 981.7269 [A].The relationship between any given
parameter and the Ampacity is studied by assuming the parameter to be studied and the Ampacity as unknowns
while other quantities are calculated and applied in the Ampacity equation. This brings out an equation showing
the relationship between the Ampacity and the parameter in question. The relationship between these parameters
and the Ampacity are plotted for the two kinds of conductors used (aluminium and copper) each with three
different types of Insulators namely XLPE, Polyvinyl Chloride and oil impregnated paper thus resulting in six
graphs per parameter. The graph is plotted for various values of the parameter using Matlab. The relationships
are shown.
Ambient Temperature : The relationship between ambient temperature and Ampacity for XLPE insulated
cable is shown:
XLPE insulated cable with Aluminium conductor:
I = where Ambient Temperature
6. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 62
The values of I is computed for various values of using Matlab and the graph plotted. The output of the
graph is shown in figure 1.0:
Fig1.0 Cable Ampacity vs Ambient Temperature for XLPE with aluminium conductor
XLPE insulated cable with copper conductor: For copper conductor, the relationship between the ampacity
and the ambient temperature and its plot is shown in figure 2.0:
I =
Fig 2.0 Graph of Ampacity vs Ambient temperature for XLPE insulated copper conductor cable
For Polyvinyl Chloride Insulator: For Aluminium Conductor : The relationship between the Ampacity and
the Ambiet temperature and its graph is shown below:I =
Graph of Ampacity vs Ambient temperature for PVC with Aluminium conductor
Copper conductor with PVC insulation:The relationship and the graph are shown in figure 3.0
I =
7. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 63
Fig 3.0 Graph of ampacity vs ambient temperature for PVC insulation with copper conductor
Oil Impregnated Paper dielectric: The relationship between the ampacity and ambient temperature for each of
the two different types of conductor using paper dielectric is shown in figure 4.0
Aluminium Conductor: The relationship and the graph is shown below:
I =
Fig 4.0 Graph of ampacity vs Ambient Temperature for Paper Dielectric using aluminium
Copper Conductor: The relationship and the graph for a paper insulated cable for ampacity against ambient
temperature is shown in figure 5.0
I =
Fig 5.0 Graph of ampacity vs abient temperature for paper insulated copper conductor cable
Conductor Temperature : As shown from the Ampacity calculations, the relationship between the Ampacity
rating of underground cables and the Conductor temperature for Aluminium and Copper Conductors
respectively are;
Aluminium:
I = where Conductor Temperature
The values of I is plotted for various values of and the graph showing this relationship is shownin figure
6.0
8. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 64
Fig 6.0 Graph of Cable Ampacity vs Core temperature with Aluminium conductor
For Copper Conductor: The relationship and its graph is shown in figure 7.0
I =
Fig 7.0 Graph of Ampacity vs copper conductor core temperature
For Dielectric loss: The effect of dielectric losses on Ampacity is studied for XLPE insulation with each of the
two conductors i.e. aluminium and copper conductors. The relationship and the plot of Ampacityvs dielectric
loss for each of the different dielectric is shown in figure 8.0 and 9.0 respectively
FOR ALUMINIUM CONDUCTOR:
I =
Fig 8.0 Graph of Ampacity vs Dielectric loss for Aluminium Conductor
Copper Conductor: The relationship and the graph of Ampacity vs. dielectric loss for a copper conductor
XLPE insulated cable is shown below:
I =
9. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 65
Fig 9.0 Graph of Ampacity vs Dielectric loss for copper conductor, XLPE insulated cable
TRANSIENT STATE : The insulators are weakened as a result of over voltage surges in transmission
lines. This is majorly noticed when XLPE insulated cables are used for underground cabling. This
eventually results in cable failure. However ,in ensuring that this failure does no happen, the insulator
breakdown as a result of temperature rise should therefore be computed in order to determine the over-
voltage ratings of such cables.The rise in core temperature and time duration of over-current should be
known to calculate the over-current rating and it depends on their thermal conditions.
SHORT CIRCUIT RATING : According to Jean-Pierre in Nexans publication (2004), Short circuit
current in an electrical network are as a result of the accidental connection of one or more phase
conductors, either together, or with the ground. There are two types of short circuit currents namely:
Symmetrical Short Circuits (3 phase short circuits) where the currents in the three phases form a
balanced system. These currents therefore only circulate in the conductor (cores) of the cable.Zero
Sequence Short Circuits result from an unsymmetrical i.e. unbalanced current system. Zero sequence
currents return via the ground and/ or by the conductors that are electrically parallel to the ground.
These conductors are mainly ground conductors, metallic screens connected to the ground at the line
termination or ground itself. Under short circuit conditions, the current flowing in the cable is many
times the full load value of the current. Heat produced in the conductor is proportional to the square of
the current.The safe value of limiting temperature is usually taken as 1200
C. For a maximum
continuous operating conductor temperature of 500
C and a permissible temperature rise of 200
C during
Short Circuit, the approximate formula may be given as ISC = Where ISC = Short Circuit rms value
of the current, A = Cross-sectional Area of the conductor, t = Duration of Short Circuit (seconds), K
= A constant (The value of the constant depends on the rise of temperature).If the amount of heat
generated in a cable is equal to that dissipated, a thermal equilibrium is reached. For satisfactory
operation of the cable, the operating temperature should be lesser than the permissible maximum
temperature. In case the amount of heat generated is more than the dissipated, the cable temperature
goes on rising till a
thermal breakdown occurs when the insulation is damaged. Thus there’s a need for protection of underground
cables against Transient Over-Voltages and Short Circuit current.
EFFECTS OF SHORT-CIRCUIT CURRENTS ON EQUIPMENT
Thermal effects : Short-circuit currents flowing through conductors of various power system equipment create
thermal effects due to heating and excess energy input over time as measured by I2
T.Where Iis short-circuit
current magnitude and T, short-circuit current duration. The heat loss from conductors during isalso very low.
Generally, both ac and dc components of short-circuit current contribute to thermal heating of conductors..
During the making of high short-circuit currents by inadequately rated circuit-breakers, their contacts may weld
together encouraged by a pre striking flashover arc and possibly contact popping.
Mechanical Effects : Short-circuit currents flowing through conductors of various power system
equipment create electromagnetic forces and mechanical stresses on underground cables. The
electromagnetic forces produced by short-circuit currents in three-core unarmored cables tend to repel
the cores from each other and could burst the cable altogether leading to insulation damage if the cores
are not adequately bound.
10. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 66
POWER GENERATED IN AN UNDERGROUND CABLE
Reactive power is a concept used to describe the background energy movement arising in Alternating Current (AC)
system due to production of electric and magnetic fields. These fields store energy which changes through each AC
cycle. Reactive power flows can give rise to substantial voltage changes across the system thus it is necessary to maintain
reactive power balancesbetween the sources of generation and the point of demand on zonalbasis. Underground cables,
when operating at normal system voltage produce strong electric field and so generate reactive power. When current
flows through a cable, it produces magnetic fields which absorb reactive power. The reactive power generated by electric
field in underground cables is always greater than the reactive power absorbed by the magnetic field. Thus, the
underground cable is a net generator of reactive power.Since the single core cable has an earthed metallic sheath, there is
an electric field between the conductor core and the sheath. Let the charge on the surface of the conductor be q coulomb
per metre length of cable. The electric flux density at a radius x is
Dx= C/m2
12
The electric field intensity Ex at a radius x isEx = Dx╱
r
0 = q/2∏
r
0x V/m 13.
Where
r is the relative permittivity (dielectric constant) of the cable insulation and
0 = 8.85 x 10-12
F/m.The
potential difference between the core and the sheath is
V =∫r
R
Exdx = (q/2∏
r
0)(In ) volts 14
Capacitance between the conductor core and sheath is
C = = (2∏
r
0/In ) F/m 15
An underground cable has high capacitance which results in charging current and reactive power. If V is the line
to line voltage, the charging current Ic is
Ic=2 fCV/ 16
This therefore implies that the 3-phase reactive power is VIc. Applying equation 16
Reactive power = VIc = V (2∏fCV/ [2∏
r
0/In
= 4 2
f V2
r
0/[In (R/r)] vars/m 17
The flow of charging current causes heating of the cable. Therefore, the load current capability of the
underground cable is decreased (i.e. derating occurs) if the temperature rise is not exceeded.
VI RESULTS OF RESEARCH
The Steady state Ampacity rating of an underground cable is derived and it is given as:I = Where
X = ( T1 + ( 1 + (T3 + T4)) Y= ( ½ T1 + T3 + T4 ),W = Wd,R = Rac, = ca,,
c =Conductor temperaturea =Ambient temperature. Due to the economic implications of underground cable
failures, it is important to study the different parameters that directly or indirectly affect the Ampacity rating of
an Underground Cable. The following results have therefore been deduced:
Ambient Temperature: The research shows that the ambient temperature is inversely proportional to the
Ampacity rating of an Underground Cable in the steady state irrespective of the type of conductor (whether
copper or Aluminium used).For all the graphs plotted, it is clear that irrespective of the type of insulation, the
Ampacity of a copper conductor is always higher than that of an Aluminium conductor.
Conductor Temperature: The conductor core temperature is directly proportional to Ampacity of an
underground cable. It can further be deduced that,
Insulation Resistance. The insulation resistance of a dielectric is inversely proportional to the Ampacity of an
Underground Cable. This therefore means that the higher the Ampacity, the lesser the Insulation resistance.
Cable Depth In Soil (for direct burial method): The cable depth in soil is inversely proportional to the
Ampacity rating of the Underground cable. The higher the depth value is, the lower the Ampacity of the cable.
Transient State And Short Circuit State Condition: In the event of a switching over-voltage (transient state)
and a short circuit fault ( short circuit condition) the insulator must be able to withstand the rapid temperature
rise accompanied by these occurrences without the insulator degrading so as to eliminate that cause of
underground cable failure
The reactive power generated in underground cables is accompanied by the flow of charging current which
causes heating of the underground cable. The insulator should be able to withstand the amount of heat produced
without degrading so as not to result in failure of the Underground Cable.
11. Modelling Of Underground Cables For High...
www.theijes.com The IJES Page 67
VII CONCLUSION
The study of the behaviour of underground cables in the steady, transient and short circuit states gave so much
insights into the behaviour of underground cables under these conditions. The knowledge of the main cause of
Underground cable failure which is the failure of the dielectric or the insulating material due to excessive heating
of the cable was covered. In order to reduce failure rates of underground cables, the design and construction of
cables should be such that it operates within acceptable temperature limits during each of the steady, transient
and short circuit conditions. Also the effect of the environment (which includes the surrounding soil where the
cable is to be laid ). All the various aspects of this research should therefore be considered during the design of
cables in order to get the desired output.
VIII RECOMMENDATION: Although the cost of installation of underground cable system is very high
compared to the equivalent cost of installing an overhead transmission line system, the underground cable has a
far higher reliability than the overhead line. The underground cable system also has a lesser failure rates and
outages compared to the overhead line system. With the ever growing Nigerian population and the recent
intention of the federal government of Nigeria to increase the primary transmission voltage from 330kV to 750
kV, the use of Underground cables for the transmission of this 750 kV will be a good and economical option
The use of 750kV in overhead line will pose too much risk to lives and properties as they are exposed to
increased radiation. Most importantly, they are also at serious risk of electrocution if the air between the
overhead line and the ground is ionized as a result of the extremely high voltage. Alternatively, with the
Underground cable system, the failure rates are highly reduced thus far lower outages, they last longer than
overhead transmission lines, underground cables can be passed through residential areas without posing any risk
to the people and animals living in that area
REFERENCES
[1] American Electric Power, “Important Factors Affecting Underground Cable Placement of Transmission Facilities”, May 2007.
[2] Faruk, A., et al “Computer Assisted Teaching of Underground Power Cables (POWCABGUI) for Graduate Students”, p 1-7,
September 2009.
[3] Francisco, D.”Calculation of Underground Cable Ampacity”, CYME International T&D, September 2005.
[4] Keith, M., “ELEC 5205- High Voltage Engineering”, University of Sydney, March 2008.
[5] Johan, E., “Underground Cables in Transmission Networks”. May 2005
[6] Nexans High Voltage Underground Cables, “60-500kV High Voltage Underground Power Cables, XLPE insulated cables”, August
2004.
[7] Transpower New Zealand LTD, “Comparison of Reliability of a 400kV Underground Cable with an Overhead Line for a 200km
Circuit”, p 1-6, March 2005.
[8] Unnur, S., et. Al “Measurement for validation of high voltage Underground Cable Modelling”, p 1-2,March 2009.