Hydraulic Braking System
•Download as PPTX, PDF•
16 likes•8,955 views
The document summarizes a presentation on hydraulic braking systems. It discusses key components like the master cylinder, wheel cylinder, brake shoes, brake drum, and brake fluid. It then lists advantages like equal braking on all wheels, increased braking force and flexibility. Potential issues are also mentioned, such as system failure from fluid leakage or air in the tubings. The presentation was given by Rajat W Sangrame, Pratik D Urkude and Neha H Paulzagde, guided by Alokkumar Yadav Sir at Govt Polytechnic, Sakoli.
Report
Share
Report
Share
Recommended
Hydraulic brakes
The document discusses hydraulic brakes. It begins with an introduction explaining that hydraulic brakes use brake fluid to transfer pressure from the controlling unit like the brake pedal to the actual brake mechanism near the wheels. It then covers the classification, principles, construction, operation, and advantages/disadvantages of hydraulic brake systems. The construction section describes components like the master cylinder, wheel cylinder, brake shoes, brake drum, brake fluid, and brake lines/hoses.
Suspension system - CSVTU Automobile Engg.
This document provides an overview of automobile suspension systems. It discusses the objectives of a suspension system which include maximizing tire contact with the road, providing steering stability and handling, and evenly supporting the vehicle's weight. It then describes the basic components of a suspension system including springs, dampers, control arms, and ball joints. Finally, it discusses different types of suspension systems like rigid suspensions, independent suspensions, and air suspensions. It provides details on leaf springs, coil springs, torsion bars, and shock absorbers.
Hydraulic Braking System Presentation.pptx
Hydraulic Breaking System Project Presentation by Sushant Patil.
Introduction to Hydraulic Breaking System ,
Why we need Hydraulic Breaking System? ,
Principal of working of Hydraulic Breaking System,
Working of Hydraulic Breaking System ,
Applications of Hydraulic Breaking System,
Advantages of Hydraulic Breaking System,
Disadvantages Hydraulic Breaking System,
Applications of Hydraulic Breaking System,
Conclusion
Pascals Law,
Hydraulic Breaking System Project Report & Presentation
Clutch
The document discusses the components and operation of a manual transmission clutch system. It describes the main components as the flywheel, clutch disc, pressure plate assembly, and clutch release bearing. The flywheel connects to the engine and the clutch disc connects it to the transmission. The pressure plate squeezes the clutch disc to engage and disengage drive via springs or a diaphragm. The release bearing is used to disengage the clutch via the pedal linkage. Freeplay in the pedal allows full engagement without excess wear.
Braking system
The document discusses various types of automotive braking systems. It describes the principles of hydraulic brakes, which use fluid pressure to provide equal braking force to all wheels according to Pascal's law. Drum brakes are also summarized, noting how brake shoes expand outward to contact the rotating drum and slow the wheels. Disc brakes are outlined as having pads that clamp onto a central disc attached to the wheel. Power brakes are mentioned as using engine vacuum pressure to boost braking force applied by the driver.
hydraulic brake ppt
The document discusses hydraulic braking systems. It describes how hydraulic brakes work by using brake fluid to build pressure and actuate the wheel cylinders for braking action based on Pascal's law. The two main types of hydraulic brakes are drum brakes and disc brakes. Drum brakes use a wheel cylinder to press brake shoes against a rotating drum, while disc brakes use a caliper to squeeze brake pads against a rotor. The key components and working principles of both systems are explained. Advantages of hydraulic brakes include equal braking on all wheels and increased braking force, while disadvantages are the risk of failure from fluid leaks and more complex construction.
Studyguide suspension and steering
1) The document discusses steering and suspension systems, covering rack-and-pinion steering, conventional steering, MacPherson strut suspension, and short/long arm suspension.
2) It describes the key components of each system, such as the pinion, rack, tie rods and linkages for rack-and-pinion steering, and the pitman arm, idler arm and center link for conventional steering.
3) The document provides an overview of suspension types including MacPherson strut and short/long arm, and discusses their different control arm configurations.
Steering system
The steering system controls the direction of front wheels to steer the vehicle. It transmits road feedback and absorbs shocks from the road surface. The main components are the steering wheel, column, gearbox or rack-and-pinion assembly, and linkages connecting the assembly to the wheels. Power steering uses hydraulic pressure from an engine-driven pump to assist the driver. Common problems include excess steering wheel play, hard steering requiring too much effort, and noises from worn belts or low fluid levels.
Recommended
Hydraulic brakes
The document discusses hydraulic brakes. It begins with an introduction explaining that hydraulic brakes use brake fluid to transfer pressure from the controlling unit like the brake pedal to the actual brake mechanism near the wheels. It then covers the classification, principles, construction, operation, and advantages/disadvantages of hydraulic brake systems. The construction section describes components like the master cylinder, wheel cylinder, brake shoes, brake drum, brake fluid, and brake lines/hoses.
Suspension system - CSVTU Automobile Engg.
This document provides an overview of automobile suspension systems. It discusses the objectives of a suspension system which include maximizing tire contact with the road, providing steering stability and handling, and evenly supporting the vehicle's weight. It then describes the basic components of a suspension system including springs, dampers, control arms, and ball joints. Finally, it discusses different types of suspension systems like rigid suspensions, independent suspensions, and air suspensions. It provides details on leaf springs, coil springs, torsion bars, and shock absorbers.
Hydraulic Braking System Presentation.pptx
Hydraulic Breaking System Project Presentation by Sushant Patil.
Introduction to Hydraulic Breaking System ,
Why we need Hydraulic Breaking System? ,
Principal of working of Hydraulic Breaking System,
Working of Hydraulic Breaking System ,
Applications of Hydraulic Breaking System,
Advantages of Hydraulic Breaking System,
Disadvantages Hydraulic Breaking System,
Applications of Hydraulic Breaking System,
Conclusion
Pascals Law,
Hydraulic Breaking System Project Report & Presentation
Clutch
The document discusses the components and operation of a manual transmission clutch system. It describes the main components as the flywheel, clutch disc, pressure plate assembly, and clutch release bearing. The flywheel connects to the engine and the clutch disc connects it to the transmission. The pressure plate squeezes the clutch disc to engage and disengage drive via springs or a diaphragm. The release bearing is used to disengage the clutch via the pedal linkage. Freeplay in the pedal allows full engagement without excess wear.
Braking system
The document discusses various types of automotive braking systems. It describes the principles of hydraulic brakes, which use fluid pressure to provide equal braking force to all wheels according to Pascal's law. Drum brakes are also summarized, noting how brake shoes expand outward to contact the rotating drum and slow the wheels. Disc brakes are outlined as having pads that clamp onto a central disc attached to the wheel. Power brakes are mentioned as using engine vacuum pressure to boost braking force applied by the driver.
hydraulic brake ppt
The document discusses hydraulic braking systems. It describes how hydraulic brakes work by using brake fluid to build pressure and actuate the wheel cylinders for braking action based on Pascal's law. The two main types of hydraulic brakes are drum brakes and disc brakes. Drum brakes use a wheel cylinder to press brake shoes against a rotating drum, while disc brakes use a caliper to squeeze brake pads against a rotor. The key components and working principles of both systems are explained. Advantages of hydraulic brakes include equal braking on all wheels and increased braking force, while disadvantages are the risk of failure from fluid leaks and more complex construction.
Studyguide suspension and steering
1) The document discusses steering and suspension systems, covering rack-and-pinion steering, conventional steering, MacPherson strut suspension, and short/long arm suspension.
2) It describes the key components of each system, such as the pinion, rack, tie rods and linkages for rack-and-pinion steering, and the pitman arm, idler arm and center link for conventional steering.
3) The document provides an overview of suspension types including MacPherson strut and short/long arm, and discusses their different control arm configurations.
Steering system
The steering system controls the direction of front wheels to steer the vehicle. It transmits road feedback and absorbs shocks from the road surface. The main components are the steering wheel, column, gearbox or rack-and-pinion assembly, and linkages connecting the assembly to the wheels. Power steering uses hydraulic pressure from an engine-driven pump to assist the driver. Common problems include excess steering wheel play, hard steering requiring too much effort, and noises from worn belts or low fluid levels.
HYDRAULIC BRAKING SYSTEMS
Hydraulic braking systems use pressurized brake fluid to transmit force through the hydraulic circuit and generate braking force. The fluid pressure is created by the brake pedal acting on the master cylinder and distributed through the lines to the wheel cylinders or calipers, where pistons increase the force and create braking force to slow the vehicle. Drum brakes use expanding brake shoes to create friction on the inner surface of the drum, while disc brakes use calipers and brake pads to squeeze the rotor. Hydraulic systems provide balanced braking force to all wheels through proportioning valves.
power steering system
The document discusses power steering systems for automobiles. It begins by describing conventional steering systems and how power steering reduces the effort required to steer by multiplying the force applied through the steering wheel. Today, 80% of cars are equipped with power steering. It then discusses why power steering is needed for reasons like quick response time, reducing steering fatigue, controlling bump steer, and improving returnability. The document outlines the three main types of power steering systems - hydraulic, electro-hydraulic, and electronic - and describes the key components and working of each type.
Vacuum braking system
This document describes the components and working of a vacuum braking system used in trains. The key components are the driver's brake valve, exhauster, brake pipe, brake cylinders, and vacuum reservoirs. The exhauster creates a vacuum in the brake pipe to release the brakes. Loss of vacuum causes the brakes to automatically apply. Additional features discussed include accelerators to speed up braking, and two-pipe systems using a reservoir pipe to enable faster brake release. Vacuum brakes were widely used in trains until being replaced by compressed air brakes which provide more braking power.
Electronic Power Steering (EPS) by Gaurav Raikar
This document summarizes the history and types of electronic power steering systems. It discusses the early developments of power steering in vehicles in the late 19th century. Hydraulic power steering became common starting in the 1950s using hydraulic fluid and actuators to augment steering effort. More recently, electro-hydraulic and electronic power steering have been developed using electric motors and control units instead of hydraulic pumps and fluid. Electronic power steering systems provide variable assistance based on driving conditions and are more energy efficient than hydraulic systems. Future developments may include fully electronic "steer-by-wire" systems without any mechanical linkages between the steering wheel and wheels.
5 classification of brakes
This document discusses different classifications and components of braking systems. It describes drum brakes, disc brakes, hydraulic braking systems, and their main components like the master cylinder, wheel cylinder, and tandem master cylinder. Drum brakes use shoes that contact a rotating drum to brake, while disc brakes use pads that squeeze a disc mounted to the wheel. Hydraulic systems use fluid pressure transferred through lines from the master cylinder to wheel cylinders to force brake shoes or pads against the drums or discs.
Hydraulic Braking System
The hydraulic brake is an arrangement of braking mechanism which uses brake fluid, typically containing ethylene glycol, to transfer pressure from the controlling mechanism to the braking mechanism.
AIR BRAKE SYSTEM
This document appears to be a project report on an air brake system. It includes sections on air brake hoses, brake cylinders, dirt collectors, auxiliary reservoirs, slack adjusters, distribution valves, and various tests conducted on the system. It provides diagrams to illustrate the components and their functions. The report was submitted in partial fulfillment of requirements for a Bachelor of Technology degree in Mechanical Engineering.
Automatic transmission.ppt
An automatic transmission changes gear ratios automatically as the vehicle accelerates or decelerates, freeing the driver from manually shifting gears. It has planetary gear sets to provide various forward and reverse gears, a torque converter to transmit torque like a clutch, and a hydraulic system with fluid, pumps, valves and clutches to control the gear shifts. The transmission fluid pressurized by the oil pump is directed by the valve body to shift valves and clutches/bands to smoothly shift between the transmission's 3-4 forward gears and reverse gear based on vehicle speed and throttle position.
Suspension system of an Automobile
1) Suspension is the term given to the
system of springs, shock absorbers and
linkages that connect a vehicle to its
wheels
3) Serve a dual purpose – contributing to the
car's handling and braking.
2) Protects the vehicle itself and any cargo or
luggage from damage and wear
Pneumatic braking system
The document summarizes the key components and operation of a pneumatic braking system. It discusses how pneumatic brakes work by using compressed air to apply pressure to brake pads to stop a vehicle. The system works through three stages - charging, applying, and releasing brakes. It is commonly used in large vehicles like trucks and buses. While powerful, pneumatic brakes require special training to operate due to their complexity compared to hydraulic systems. Overall, the document provides a high-level overview of how pneumatic braking systems function in vehicles.
Engine Management System
Quality and best engine provides better performance and boost our engines (vehicle's) efficiency. So it is better to follow a good engine management system.
Automatic transmission system ppt
This document is a seminar report on automatic transmission systems submitted by Vijay Kumar, an 8th semester mechanical engineering student at VVCE Mysore. It discusses the key components of automatic transmissions including planetary gear sets, hydraulic systems, torque converters, clutches, bands and computer controls. It also covers rear-wheel drive and front-wheel drive transmissions, common problems, and repair options. The conclusion emphasizes the importance of keeping transmissions and fluid at the proper operating temperature for long life. References include technical websites and manuals.
Hydraulic & disc braking systems
Abhishek Kumar's document discusses the principles and components of hydraulic braking systems. It explains that hydraulics uses pressurized fluids to create force and motion. The key principles are that fluids cannot be compressed and can transmit both movement and increased force via pressure. The document then describes the major components of hydraulic braking systems including the master cylinder, brake lines, brake calipers or drums, brake boosters, and proportioning valves. It explains how these components work together using hydraulic principles to stop a vehicle safely and efficiently.
Chassisand frame
The document discusses different types of vehicle chassis. It defines a chassis as the framework that supports a vehicle's body and internal components. It then describes several common chassis configurations including conventional, semi-forward, and full-forward chassis based on where the engine is mounted. Additional classifications covered are based on the number of wheels, how the engine is fitted, and the type of frame used, such as ladder, monocoque, and space frames. Various materials for frames like steel, aluminum, and carbon fiber composites are also mentioned along with their relative advantages.
railway wagon breaking system
The document discusses the railway wagon braking system. It describes how pneumatic braking systems use compressed air to apply pressure on brake pads to stop trains. The key components of a pneumatic braking system are the air compressor, air storage reservoirs, brake valve, brake cylinder and triple valve. The braking process involves three stages - charging, application and release. During application, a reduction in brake pipe pressure positions valves to connect the auxiliary reservoir to the brake cylinder, applying the brakes. Pneumatic brakes provide high stopping power and are fail-safe, making them suitable for heavy vehicles like trains.
rear axle ppt
The document provides information on rear axle drives and rear axle shafts. It discusses the Hotchkiss drive system which uses leaf springs to locate the rear axle and transmit driving forces. It is a simple and inexpensive design. The document also describes torque tube drives and compares them to Hotchkiss drives. Finally, it discusses different types of rear axle shafts including semi-floating, full-floating, and three-quarter floating axles.
Air braking in Heavy Commercial Vehicles (HCV)
A detailed presentation on the topic "Air braking in heavy commercial vehicles (HCVs)". The ppt contains working and technical details of Air Braking System. Main components like Air Compressor, Reservoir, Unloader Valve, Brake Valve, Brake Chamber, Quick Release Valve and Relay Valve has been explained in details in this ppt.
BRAKING SYSTEM
The document discusses different types of braking systems used in vehicles. It describes hydraulic, pneumatic, mechanical, disc, and anti-lock braking systems (ABS). The hydraulic system uses brake fluid to transfer pressure from the brake pedal to the wheel cylinders. ABS allows wheels to maintain traction with the road surface during braking to prevent skidding. ABS offers improved vehicle control and reduced stopping distances compared to regular brakes.
Brakes
Automobile Brakes, Functions of Brakes, Requirements of a good braking system, Types of Brakes, Mechanical Brakes, Internal Expanding Brake, Hand Brake, Disk Brake, Hydraulic Brake, Power Brakes, Air Brake, Air-Hydraulic Brake, Vacum Brake, Exhaust Brake, Electric Brake, Antilock Braking System (ABS), Brake Effectiveness
Torque converter
A torque converter is a fluid coupling used in automatic transmissions that transfers power from the engine to the transmission. It contains an impeller connected to the engine, a turbine connected to the transmission, and a stator in between. In different operating modes like stall and acceleration, the torque converter can multiply torque to help vehicles start moving or can act like a fluid coupling at higher speeds. Problems that can occur include overheating, stator clutch issues, blade damage, and housing distortion from extreme operating conditions.
INTRODUCTION TO HYDRAULICS AND PNEUMATICS.pptx
This document provides an introduction to hydraulics and pneumatics. It defines hydraulics as the study of fluids in motion to transmit power and pneumatics as the study of gases in motion to transmit power. Both are forms of fluid power. Key components of hydraulic and pneumatic systems include pumps to generate pressure, reservoirs to store fluid, and actuators to convert fluid power into motion. Examples of applications include hydraulic systems for vehicles and manufacturing and pneumatic systems for tools and medical devices.
More Related Content
What's hot
HYDRAULIC BRAKING SYSTEMS
Hydraulic braking systems use pressurized brake fluid to transmit force through the hydraulic circuit and generate braking force. The fluid pressure is created by the brake pedal acting on the master cylinder and distributed through the lines to the wheel cylinders or calipers, where pistons increase the force and create braking force to slow the vehicle. Drum brakes use expanding brake shoes to create friction on the inner surface of the drum, while disc brakes use calipers and brake pads to squeeze the rotor. Hydraulic systems provide balanced braking force to all wheels through proportioning valves.
power steering system
The document discusses power steering systems for automobiles. It begins by describing conventional steering systems and how power steering reduces the effort required to steer by multiplying the force applied through the steering wheel. Today, 80% of cars are equipped with power steering. It then discusses why power steering is needed for reasons like quick response time, reducing steering fatigue, controlling bump steer, and improving returnability. The document outlines the three main types of power steering systems - hydraulic, electro-hydraulic, and electronic - and describes the key components and working of each type.
Vacuum braking system
This document describes the components and working of a vacuum braking system used in trains. The key components are the driver's brake valve, exhauster, brake pipe, brake cylinders, and vacuum reservoirs. The exhauster creates a vacuum in the brake pipe to release the brakes. Loss of vacuum causes the brakes to automatically apply. Additional features discussed include accelerators to speed up braking, and two-pipe systems using a reservoir pipe to enable faster brake release. Vacuum brakes were widely used in trains until being replaced by compressed air brakes which provide more braking power.
Electronic Power Steering (EPS) by Gaurav Raikar
This document summarizes the history and types of electronic power steering systems. It discusses the early developments of power steering in vehicles in the late 19th century. Hydraulic power steering became common starting in the 1950s using hydraulic fluid and actuators to augment steering effort. More recently, electro-hydraulic and electronic power steering have been developed using electric motors and control units instead of hydraulic pumps and fluid. Electronic power steering systems provide variable assistance based on driving conditions and are more energy efficient than hydraulic systems. Future developments may include fully electronic "steer-by-wire" systems without any mechanical linkages between the steering wheel and wheels.
5 classification of brakes
This document discusses different classifications and components of braking systems. It describes drum brakes, disc brakes, hydraulic braking systems, and their main components like the master cylinder, wheel cylinder, and tandem master cylinder. Drum brakes use shoes that contact a rotating drum to brake, while disc brakes use pads that squeeze a disc mounted to the wheel. Hydraulic systems use fluid pressure transferred through lines from the master cylinder to wheel cylinders to force brake shoes or pads against the drums or discs.
Hydraulic Braking System
The hydraulic brake is an arrangement of braking mechanism which uses brake fluid, typically containing ethylene glycol, to transfer pressure from the controlling mechanism to the braking mechanism.
AIR BRAKE SYSTEM
This document appears to be a project report on an air brake system. It includes sections on air brake hoses, brake cylinders, dirt collectors, auxiliary reservoirs, slack adjusters, distribution valves, and various tests conducted on the system. It provides diagrams to illustrate the components and their functions. The report was submitted in partial fulfillment of requirements for a Bachelor of Technology degree in Mechanical Engineering.
Automatic transmission.ppt
An automatic transmission changes gear ratios automatically as the vehicle accelerates or decelerates, freeing the driver from manually shifting gears. It has planetary gear sets to provide various forward and reverse gears, a torque converter to transmit torque like a clutch, and a hydraulic system with fluid, pumps, valves and clutches to control the gear shifts. The transmission fluid pressurized by the oil pump is directed by the valve body to shift valves and clutches/bands to smoothly shift between the transmission's 3-4 forward gears and reverse gear based on vehicle speed and throttle position.
Suspension system of an Automobile
1) Suspension is the term given to the
system of springs, shock absorbers and
linkages that connect a vehicle to its
wheels
3) Serve a dual purpose – contributing to the
car's handling and braking.
2) Protects the vehicle itself and any cargo or
luggage from damage and wear
Pneumatic braking system
The document summarizes the key components and operation of a pneumatic braking system. It discusses how pneumatic brakes work by using compressed air to apply pressure to brake pads to stop a vehicle. The system works through three stages - charging, applying, and releasing brakes. It is commonly used in large vehicles like trucks and buses. While powerful, pneumatic brakes require special training to operate due to their complexity compared to hydraulic systems. Overall, the document provides a high-level overview of how pneumatic braking systems function in vehicles.
Engine Management System
Quality and best engine provides better performance and boost our engines (vehicle's) efficiency. So it is better to follow a good engine management system.
Automatic transmission system ppt
This document is a seminar report on automatic transmission systems submitted by Vijay Kumar, an 8th semester mechanical engineering student at VVCE Mysore. It discusses the key components of automatic transmissions including planetary gear sets, hydraulic systems, torque converters, clutches, bands and computer controls. It also covers rear-wheel drive and front-wheel drive transmissions, common problems, and repair options. The conclusion emphasizes the importance of keeping transmissions and fluid at the proper operating temperature for long life. References include technical websites and manuals.
Hydraulic & disc braking systems
Abhishek Kumar's document discusses the principles and components of hydraulic braking systems. It explains that hydraulics uses pressurized fluids to create force and motion. The key principles are that fluids cannot be compressed and can transmit both movement and increased force via pressure. The document then describes the major components of hydraulic braking systems including the master cylinder, brake lines, brake calipers or drums, brake boosters, and proportioning valves. It explains how these components work together using hydraulic principles to stop a vehicle safely and efficiently.
Chassisand frame
The document discusses different types of vehicle chassis. It defines a chassis as the framework that supports a vehicle's body and internal components. It then describes several common chassis configurations including conventional, semi-forward, and full-forward chassis based on where the engine is mounted. Additional classifications covered are based on the number of wheels, how the engine is fitted, and the type of frame used, such as ladder, monocoque, and space frames. Various materials for frames like steel, aluminum, and carbon fiber composites are also mentioned along with their relative advantages.
railway wagon breaking system
The document discusses the railway wagon braking system. It describes how pneumatic braking systems use compressed air to apply pressure on brake pads to stop trains. The key components of a pneumatic braking system are the air compressor, air storage reservoirs, brake valve, brake cylinder and triple valve. The braking process involves three stages - charging, application and release. During application, a reduction in brake pipe pressure positions valves to connect the auxiliary reservoir to the brake cylinder, applying the brakes. Pneumatic brakes provide high stopping power and are fail-safe, making them suitable for heavy vehicles like trains.
rear axle ppt
The document provides information on rear axle drives and rear axle shafts. It discusses the Hotchkiss drive system which uses leaf springs to locate the rear axle and transmit driving forces. It is a simple and inexpensive design. The document also describes torque tube drives and compares them to Hotchkiss drives. Finally, it discusses different types of rear axle shafts including semi-floating, full-floating, and three-quarter floating axles.
Air braking in Heavy Commercial Vehicles (HCV)
A detailed presentation on the topic "Air braking in heavy commercial vehicles (HCVs)". The ppt contains working and technical details of Air Braking System. Main components like Air Compressor, Reservoir, Unloader Valve, Brake Valve, Brake Chamber, Quick Release Valve and Relay Valve has been explained in details in this ppt.
BRAKING SYSTEM
The document discusses different types of braking systems used in vehicles. It describes hydraulic, pneumatic, mechanical, disc, and anti-lock braking systems (ABS). The hydraulic system uses brake fluid to transfer pressure from the brake pedal to the wheel cylinders. ABS allows wheels to maintain traction with the road surface during braking to prevent skidding. ABS offers improved vehicle control and reduced stopping distances compared to regular brakes.
Brakes
Automobile Brakes, Functions of Brakes, Requirements of a good braking system, Types of Brakes, Mechanical Brakes, Internal Expanding Brake, Hand Brake, Disk Brake, Hydraulic Brake, Power Brakes, Air Brake, Air-Hydraulic Brake, Vacum Brake, Exhaust Brake, Electric Brake, Antilock Braking System (ABS), Brake Effectiveness
Torque converter
A torque converter is a fluid coupling used in automatic transmissions that transfers power from the engine to the transmission. It contains an impeller connected to the engine, a turbine connected to the transmission, and a stator in between. In different operating modes like stall and acceleration, the torque converter can multiply torque to help vehicles start moving or can act like a fluid coupling at higher speeds. Problems that can occur include overheating, stator clutch issues, blade damage, and housing distortion from extreme operating conditions.
What's hot (20)
Similar to Hydraulic Braking System
INTRODUCTION TO HYDRAULICS AND PNEUMATICS.pptx
This document provides an introduction to hydraulics and pneumatics. It defines hydraulics as the study of fluids in motion to transmit power and pneumatics as the study of gases in motion to transmit power. Both are forms of fluid power. Key components of hydraulic and pneumatic systems include pumps to generate pressure, reservoirs to store fluid, and actuators to convert fluid power into motion. Examples of applications include hydraulic systems for vehicles and manufacturing and pneumatic systems for tools and medical devices.
Hydraulic arm (slmcop)5th sem... gulahmed
it is a hydraulic arm which is hydraulically operated .... a very easy presentation for hydraulic arm . it is also be presented by all students other then engineering .
Fps report landing gear
The document discusses the landing gear system of an aircraft. It describes the main components of the landing gear, including the main fitting, shock absorber, bogie beam, axle, torque links, and wheel. It highlights the mechanics and functions of the landing gear, which provides suspension during takeoff and landing to absorb impact loads. The document then covers the design process from concept to testing and qualification. It also outlines some key landing gear technologies like electric actuation systems and composite materials.
Developing and applying design skills grade 7
This document discusses pneumatic and hydraulic systems. It provides definitions for pneumatic and hydraulic systems, noting that pneumatic systems use compressed air while hydraulic systems use liquids. The document then discusses examples of pneumatic and hydraulic tools and mechanisms. It goes on to discuss the design process for building a simple pneumatic or hydraulic machine to help a teacher move objects with an injured arm. This includes developing a design brief, specifications, constraints, initial sketches, selecting materials, and creating a trial model.
hydraulic robotic arm
This document is a project report on the manufacturing of a hydraulic robotic arm. It was submitted by Bijoy Mondal to fulfill the requirements for a diploma in mechanical engineering from Elitte Institute of Engineering and Management. The report details the components of the robotic arm including hydraulic cylinders, fluid lines, arms, grippers, a chassis, motor, and wheels. It also discusses the principles of hydraulic systems, classification of hydraulic robots, materials used, and the advantages and disadvantages of the design.
Similar to Hydraulic Braking System (6)
Recently uploaded
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneTemple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
Recently uploaded (20)
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Hydraulic Braking System
- 1. Govt Polytechnic, Sakoli Topic : Hydraulic Braking System Guided by Alokkumar Yadav Sir Presented By Rajat W Sangrame (54) Pratik D Urkude (57) Neha H Paulzagde (53)
- 2. Braking Fliud & Mechanism Transfer Pressure Oprating Of Vehicle
- 3. Pascal’s law pressure at a point in a fluid is equal in all directions
- 4. • • • • • • Master Cylinder Wheel Cylinder Brake Shoes Brake Drum Brake Fluid Brake Lines And Hoses
- 6. Brake Shoes
- 10. Equal braking action on all wheels. Increased braking force. Simple in construction. Low wear rate of brake linings. Flexibility of brake linings. Increased mechanical advantage.
- 11. Whole braking system fails due to leakage of fluid from brake linings. Presence of air inside the tubings ruins the whole system.
- 12. Books: • Automobile Engineering Vol - I by Dr Kirpal Singh • Automotive Technology by H M Sethi Websites: http://en.wikipedia.org/wiki/Hydraulic_brake http://www.thefreedictionary.com/hydraulic+brakes