Hse alert 12 2017 four hse priciples
•Download as DOCX, PDF•
0 likes•104 views
The document reminds project managers of four health and safety (HSE) principles that must be reinforced: safety starts at the gate, no personal protective equipment (PPE) means no work, everyone is responsible for safety, and management is accountable for everyone's safety. Signs communicating these principles must be posted. Fire drills now will check PPE and record workers without mandatory PPE to report to supervisors. HSE training for construction teams will cover responsibilities, accountability, and consequences for not following safety rules and principles. Project teams must analyze 'Don't Walk By' trends and causes to determine HSE awards.
Report
Share
Report
Share
Recommended
HSE Fire Prevention & Protection Plan
Introduction ………………………………………………………………………….…….......04
1.1 Purpose and Objective……………………………………………………………..........04
1.2 Legislation and References………………………………………………………..........04
1.3 Scope & Project Details……………………………………………………………….…..04
1.4 Revisions…………………………………………..…………………………...……………05
2. Roles and Responsibilities…………………………………………………………….……..05
2.1 Person(s) Responsible for Ensuring Compliance with this Plan………….…......…….08
3. Strategy…………………………………………………………………………………….……..08
3.1 Procedure for the Implementation of the Strategy…………..…………….....……...09
3.1.1 Good Housekeeping, Waste Management & Waste Disposal………………09
3.1.2 Proper Use & Safe Guarding of Ignition Sources…...………………..……...10
3.1.2.1 Classification of Fire (Based On the Type of Materials Involved)………..13
3.1.3 Training………………………………………..………………………………….….15
3.1.4 Use of Fire Retardant Materials………………….………………………….…....15
3.1.5 Cable Management……….……………………………………………………...…16
3.1.6 Equipment Inspection and Maintenance…………………………………….....16
3.1.7 Permit To Work Systems – Emphasis on Strict implementation of Fire
Prevention & protection plan……………………………………………...…..…16
3.1.8 Portable Fire Extinguishers………………………………….………………….…16
4. Fire & Safety during Construction…………………………………………………………….19
5. Summary of Fire Protection Program…………………………………………………...……20
6. Fire Prevention, Control, Containment and Fire Fighting………….………………………20
7. Initial Notification Procedure…………………………………………………………………...21
8. Termination of Fire Threat……………….……………………………………………….…….22
9. Fire Action Summary (For Site and Offices)………………………………………………..22
10. Assembly Points and First Aid Facility……………………………….……………………23
Project hse plan kikeh spar
This document outlines the health, safety, and environmental (HSE) plan for the Kikeh Spar hook-up and commissioning project. It details the HSE goals, responsibilities, programs, and activities that will be implemented. The key objectives of the HSE plan are to ensure compliance with regulations and prevent incidents in order to maintain safety during all project phases. The plan describes the HSE management system, training, monitoring, emergency response procedures, and other important elements that will be followed.
Atc cop 01 fire prevention requirements rev. 01 august, 2018
Code of Practice
C.O.P # 01
Fire Prevention Requirements
(Management of Combustible Materials & Electrical Inspections)
Table of Content
1. Fire Prevention and Combustible Material Management 3
2. Standards & Requirements for Combustible Stores and Temporary Structures 7
3. Fire Prevent Inspection Schedule 10
4. Fire Prevent Inspection Report 11
5. Fire Prevention Checklist 12
6. Office Porta cabin Inspection 18
7. Store Inspection 19
8. Electrical Inspections and Fire Safety 20
1. Fire Prevention and Combustible Material Management
Introduction
Fire is chemical reaction of three elements (fuel, heat and oxygen) if we remove 1 element, fire will end. Fire is a major risk both to persons and to property. You can either help prevent fires, or you can help start/allow them. In order to minimize the risk of fire in the workplace, it is vital that everyone is aware of the common causes of fire and the appropriate actions to take in the event of a fire.
Fire is one of our man risks in the construction Industry and due to many management, subcontractor and employee “cultural” issues, is even higher in the G.C.C. and the region. The cause of fire is generally combustible construction material and packing rather than incorporated items. However, even knowing this the planning, control and management of combustible materials are generally inadequate and this inadequate combustible material management is causing our project to be at higher risk levels than we should be. This document sets out to correct all the issues and short-comings in one consolidate “Company Name” Code of Practice. Combustible materials can be deemed to be at four levels of controls:
1. Stored safety in combustible materials stores.
2. Temporary stored in combustible materials managed area.
3. Stored uncontrolled.
4. In designated waste disposal area.
PROJECT HEALTH, SAFETY, AND ENVIRONMENTAL PLAN
Table of Content
1. INTRODUCTION
1.1. PURPOSE
1.2. REVISIONS
1.3. DISTRIBUTION LIST
1.4. PROJECT DETAILS
1.5. PROJECT LOCATION
2. COMPLIANCE WITH LAWS AND REGULATIONS
3. DEFINITIONS & ABBREVIATION
3.1. DEFINITIONS
3.2. ABBREVIATION
4 ARABTEC HSEQ POLICIES & CERTIFICATES HSE POLICY STATEMENT
NO SMOKING POLICY
SAFE DRIVING POLICY
WASTE MANAGEMENT POLICY
WELFARE MANAGEMENT POLICIES
ISO CERTIFICATES
ABU DHABI EHSMS CERTIFICATE OF COMPLIANCE
5 PROJECT HSE OBJECTIVES
6 ORGANIZATION RESPONSIBILITIES AND ACCOUNTABILITIES
7 HSE COMMUNICATION ORIENTATION AND TRAINING
7.1.1 SITE RULES
7.1.2 GENERAL SITE RULES
7.1.3 PERSONAL SAFETY SITE RULES
7.1.4 SAFETY REFRESHER - TRAINING
HSE Emergency preparedness plan 500 villas rev 1
I. SCOPE
II. DEFINITION
III. FIRE EMERGENCIES - GENERAL
1. On discovering a fire:
2. On hearing the alarm:
3. If trapped in an office/ room:
4. If caught in smoke:
5. If forced to advance through flames:
IV. GENERAL SPILL RESPONSE PROCEDURES
1. ASSESS THE RISK
2. PROTECT PERSONAL
3. CONFINE THE SPILL
4. CONTAIN THE LEAK/ RELEASE AT THE SOURCE
5. CLEAN UP/ REINSTATEMENT OF THE SITE.
6. SPILL FROM FUEL TANKS:
7. SPILL OR RELEASE FROM SMALL SIZE CONTAINERS
8. Chemical and Solvent Spills:
9. Toxic Fumes
V. MEDICAL EMERGENCY
ANY PERSON WITNESSING A MEDICAL EMERGENCY
Response to Medical Emergency
First Aid Tips:
1. Bleeding
2. Burns, Chemical and Thermal.
3. Chocking
4. Fainting and Shock
5. Fractures and Sprains
6. Poisoning and Overdose
7. Seizure
8. Shock
9. Unconscious/ Unresponsive
VI. ORGANIZATION CHART OF RESPONSE TEAM
VII. ROLES AND RESPONSIBILITIES
VIII. EMERGENCY ESCAPE ROUTE AND ASSEMBLY POINT
Tower Project HSE Presentation
The document outlines the health, safety, and environment (HSE) arrangements and implementation of a safety program for a tower project. It discusses plans for construction phase safety, heat/dust control, emergency evacuation, and contractor safety rules. An accident reporting system is described to safely report and track incidents and costs. Training programs are detailed for working at heights, electrical work, defensive driving, equipment operation, and first aid. Personal protective equipment requirements and safety documentation including inspections, signage, and statistics reporting are also summarized. The implementation of a permit to work system, orientations, fire equipment checks, and incident reporting process are highlighted.
HEALTH, SAFETY AND ENVIRONMENTAL MANUAL
HEALTH, SAFETY AND ENVIRONMENTAL
MANUAL
TABLE OF CONTENTS
1. AMENDMENT / APPROVAL DETAILS 3
2. INTRODUCTION 4
2.1 SCOPE & PURPOSE 4
2.2 DEFINITIONS & ABBREVIATIONS 4
3. COMPANY PROFILE 5
3.1HEALTH SAFETY ENVIRONMENTAL POLICY 11
3.2 COMPANY ORGANISATION CHART (Attached) 12
4. OUR ORGANIZATION 14
4.1 ORGANIZATIONAL CONTEXT 14
4.2 UNDERSTANDING THE NEEDS AND EXPECTATIONS OF INTERESTED PARTIES 14
4.3 SCOPE OF THE HSE MANAGEMENT SYSTEM 15
4.4 HSE MANAGEMENT SYSTEM AND PROCESSES 15
5. LEADERSHIP 16
5.1 LEADERSHIP AND COMMITMENT 16
5.2 HSE POLICY 17
5.3 ORGANIZATIONAL ROLES, RESPONSIBILITIES AND AUTHORITIES 18
6. HSE MANAGEMENT SYSTEM PLANNING 20
6.1 ACTIONS TO ADDRESS RISKS AND OPPORTUNITIES 20
6.2 OBJECTIVES AND PROGRAM(S) 23
7. SUPPORT 24
7.1 RESOURCES 24
7.2 COMPETENCY AND TRAINING 24
7.3 AWARENESS 25
7.4 COMMUNICATION, PARTICIPATION AND CONSULTATION 25
7.5 DOCUMENTATION 26
8. OPERATION 29
8.1 OPERATIONAL PLANNING AND CONTROL 29
8.2 EMERGENCY PREPAREDNESS AND RESPONSE 30
9. PERFORMANCE EVALUATION 30
9.1 MONITORING, MEASUREMENT, ANALYSIS AND EVALUATION 30
9.2 INTERNAL AUDITS 32
9.3 MANAGEMENT REVIEW 33
10. IMPROVEMENT 34
10.1 NON-CONFORMITY, CORRECTIVE ACTION AND PREVENTIVE ACTION 34
10.2 CONTINUAL IMPROVEMENT 35
11. LIST OF INTEGRATED MANAGEMENT SYSTEM (IMS) PROCEDURES 35
Occupational health plan
This document outlines an occupational health plan for a construction project. It includes sections on responsibilities, fitness to work, medical surveillance, well-being, hygiene, health site rules, and controlling occupational health risks such as noise, dust, airborne contaminants, and more. Procedures are established to manage issues like skin diseases, noise exposure, dust, fumes, and other potential health hazards on the construction site.
Recommended
HSE Fire Prevention & Protection Plan
Introduction ………………………………………………………………………….…….......04
1.1 Purpose and Objective……………………………………………………………..........04
1.2 Legislation and References………………………………………………………..........04
1.3 Scope & Project Details……………………………………………………………….…..04
1.4 Revisions…………………………………………..…………………………...……………05
2. Roles and Responsibilities…………………………………………………………….……..05
2.1 Person(s) Responsible for Ensuring Compliance with this Plan………….…......…….08
3. Strategy…………………………………………………………………………………….……..08
3.1 Procedure for the Implementation of the Strategy…………..…………….....……...09
3.1.1 Good Housekeeping, Waste Management & Waste Disposal………………09
3.1.2 Proper Use & Safe Guarding of Ignition Sources…...………………..……...10
3.1.2.1 Classification of Fire (Based On the Type of Materials Involved)………..13
3.1.3 Training………………………………………..………………………………….….15
3.1.4 Use of Fire Retardant Materials………………….………………………….…....15
3.1.5 Cable Management……….……………………………………………………...…16
3.1.6 Equipment Inspection and Maintenance…………………………………….....16
3.1.7 Permit To Work Systems – Emphasis on Strict implementation of Fire
Prevention & protection plan……………………………………………...…..…16
3.1.8 Portable Fire Extinguishers………………………………….………………….…16
4. Fire & Safety during Construction…………………………………………………………….19
5. Summary of Fire Protection Program…………………………………………………...……20
6. Fire Prevention, Control, Containment and Fire Fighting………….………………………20
7. Initial Notification Procedure…………………………………………………………………...21
8. Termination of Fire Threat……………….……………………………………………….…….22
9. Fire Action Summary (For Site and Offices)………………………………………………..22
10. Assembly Points and First Aid Facility……………………………….……………………23
Project hse plan kikeh spar
This document outlines the health, safety, and environmental (HSE) plan for the Kikeh Spar hook-up and commissioning project. It details the HSE goals, responsibilities, programs, and activities that will be implemented. The key objectives of the HSE plan are to ensure compliance with regulations and prevent incidents in order to maintain safety during all project phases. The plan describes the HSE management system, training, monitoring, emergency response procedures, and other important elements that will be followed.
Atc cop 01 fire prevention requirements rev. 01 august, 2018
Code of Practice
C.O.P # 01
Fire Prevention Requirements
(Management of Combustible Materials & Electrical Inspections)
Table of Content
1. Fire Prevention and Combustible Material Management 3
2. Standards & Requirements for Combustible Stores and Temporary Structures 7
3. Fire Prevent Inspection Schedule 10
4. Fire Prevent Inspection Report 11
5. Fire Prevention Checklist 12
6. Office Porta cabin Inspection 18
7. Store Inspection 19
8. Electrical Inspections and Fire Safety 20
1. Fire Prevention and Combustible Material Management
Introduction
Fire is chemical reaction of three elements (fuel, heat and oxygen) if we remove 1 element, fire will end. Fire is a major risk both to persons and to property. You can either help prevent fires, or you can help start/allow them. In order to minimize the risk of fire in the workplace, it is vital that everyone is aware of the common causes of fire and the appropriate actions to take in the event of a fire.
Fire is one of our man risks in the construction Industry and due to many management, subcontractor and employee “cultural” issues, is even higher in the G.C.C. and the region. The cause of fire is generally combustible construction material and packing rather than incorporated items. However, even knowing this the planning, control and management of combustible materials are generally inadequate and this inadequate combustible material management is causing our project to be at higher risk levels than we should be. This document sets out to correct all the issues and short-comings in one consolidate “Company Name” Code of Practice. Combustible materials can be deemed to be at four levels of controls:
1. Stored safety in combustible materials stores.
2. Temporary stored in combustible materials managed area.
3. Stored uncontrolled.
4. In designated waste disposal area.
PROJECT HEALTH, SAFETY, AND ENVIRONMENTAL PLAN
Table of Content
1. INTRODUCTION
1.1. PURPOSE
1.2. REVISIONS
1.3. DISTRIBUTION LIST
1.4. PROJECT DETAILS
1.5. PROJECT LOCATION
2. COMPLIANCE WITH LAWS AND REGULATIONS
3. DEFINITIONS & ABBREVIATION
3.1. DEFINITIONS
3.2. ABBREVIATION
4 ARABTEC HSEQ POLICIES & CERTIFICATES HSE POLICY STATEMENT
NO SMOKING POLICY
SAFE DRIVING POLICY
WASTE MANAGEMENT POLICY
WELFARE MANAGEMENT POLICIES
ISO CERTIFICATES
ABU DHABI EHSMS CERTIFICATE OF COMPLIANCE
5 PROJECT HSE OBJECTIVES
6 ORGANIZATION RESPONSIBILITIES AND ACCOUNTABILITIES
7 HSE COMMUNICATION ORIENTATION AND TRAINING
7.1.1 SITE RULES
7.1.2 GENERAL SITE RULES
7.1.3 PERSONAL SAFETY SITE RULES
7.1.4 SAFETY REFRESHER - TRAINING
HSE Emergency preparedness plan 500 villas rev 1
I. SCOPE
II. DEFINITION
III. FIRE EMERGENCIES - GENERAL
1. On discovering a fire:
2. On hearing the alarm:
3. If trapped in an office/ room:
4. If caught in smoke:
5. If forced to advance through flames:
IV. GENERAL SPILL RESPONSE PROCEDURES
1. ASSESS THE RISK
2. PROTECT PERSONAL
3. CONFINE THE SPILL
4. CONTAIN THE LEAK/ RELEASE AT THE SOURCE
5. CLEAN UP/ REINSTATEMENT OF THE SITE.
6. SPILL FROM FUEL TANKS:
7. SPILL OR RELEASE FROM SMALL SIZE CONTAINERS
8. Chemical and Solvent Spills:
9. Toxic Fumes
V. MEDICAL EMERGENCY
ANY PERSON WITNESSING A MEDICAL EMERGENCY
Response to Medical Emergency
First Aid Tips:
1. Bleeding
2. Burns, Chemical and Thermal.
3. Chocking
4. Fainting and Shock
5. Fractures and Sprains
6. Poisoning and Overdose
7. Seizure
8. Shock
9. Unconscious/ Unresponsive
VI. ORGANIZATION CHART OF RESPONSE TEAM
VII. ROLES AND RESPONSIBILITIES
VIII. EMERGENCY ESCAPE ROUTE AND ASSEMBLY POINT
Tower Project HSE Presentation
The document outlines the health, safety, and environment (HSE) arrangements and implementation of a safety program for a tower project. It discusses plans for construction phase safety, heat/dust control, emergency evacuation, and contractor safety rules. An accident reporting system is described to safely report and track incidents and costs. Training programs are detailed for working at heights, electrical work, defensive driving, equipment operation, and first aid. Personal protective equipment requirements and safety documentation including inspections, signage, and statistics reporting are also summarized. The implementation of a permit to work system, orientations, fire equipment checks, and incident reporting process are highlighted.
HEALTH, SAFETY AND ENVIRONMENTAL MANUAL
HEALTH, SAFETY AND ENVIRONMENTAL
MANUAL
TABLE OF CONTENTS
1. AMENDMENT / APPROVAL DETAILS 3
2. INTRODUCTION 4
2.1 SCOPE & PURPOSE 4
2.2 DEFINITIONS & ABBREVIATIONS 4
3. COMPANY PROFILE 5
3.1HEALTH SAFETY ENVIRONMENTAL POLICY 11
3.2 COMPANY ORGANISATION CHART (Attached) 12
4. OUR ORGANIZATION 14
4.1 ORGANIZATIONAL CONTEXT 14
4.2 UNDERSTANDING THE NEEDS AND EXPECTATIONS OF INTERESTED PARTIES 14
4.3 SCOPE OF THE HSE MANAGEMENT SYSTEM 15
4.4 HSE MANAGEMENT SYSTEM AND PROCESSES 15
5. LEADERSHIP 16
5.1 LEADERSHIP AND COMMITMENT 16
5.2 HSE POLICY 17
5.3 ORGANIZATIONAL ROLES, RESPONSIBILITIES AND AUTHORITIES 18
6. HSE MANAGEMENT SYSTEM PLANNING 20
6.1 ACTIONS TO ADDRESS RISKS AND OPPORTUNITIES 20
6.2 OBJECTIVES AND PROGRAM(S) 23
7. SUPPORT 24
7.1 RESOURCES 24
7.2 COMPETENCY AND TRAINING 24
7.3 AWARENESS 25
7.4 COMMUNICATION, PARTICIPATION AND CONSULTATION 25
7.5 DOCUMENTATION 26
8. OPERATION 29
8.1 OPERATIONAL PLANNING AND CONTROL 29
8.2 EMERGENCY PREPAREDNESS AND RESPONSE 30
9. PERFORMANCE EVALUATION 30
9.1 MONITORING, MEASUREMENT, ANALYSIS AND EVALUATION 30
9.2 INTERNAL AUDITS 32
9.3 MANAGEMENT REVIEW 33
10. IMPROVEMENT 34
10.1 NON-CONFORMITY, CORRECTIVE ACTION AND PREVENTIVE ACTION 34
10.2 CONTINUAL IMPROVEMENT 35
11. LIST OF INTEGRATED MANAGEMENT SYSTEM (IMS) PROCEDURES 35
Occupational health plan
This document outlines an occupational health plan for a construction project. It includes sections on responsibilities, fitness to work, medical surveillance, well-being, hygiene, health site rules, and controlling occupational health risks such as noise, dust, airborne contaminants, and more. Procedures are established to manage issues like skin diseases, noise exposure, dust, fumes, and other potential health hazards on the construction site.
HSE MANDATORY SIGNAGE
This document outlines a project safety signage plan. It includes a document approval sheet for a project with ID number HSE/001. The sheet lists the document type as a project safety signage plan and has spaces for signatures of those who prepared, reviewed, and approved the document, including the HSE manager, QHSE manager, project manager, and project director.
CV
Ahmed A. Saleh Mohamed's curriculum vitae provides information about his personal details, qualifications, professional memberships, coursework, work experience, job duties and responsibilities, languages, and computer skills. He holds a B.Sc. in Industrial Engineering and has over 20 years of experience in safety engineering and management roles in the oil and gas industry in Libya. His roles have included safety specialist, senior safety and environment engineer, safety and environment supervisor, and safety and environment coordinator for various companies.
GTC546 HSE PPT
This document provides a health, safety, and environmental (HSE) presentation by Al Hamad Trading for a project involving the detailed inspection and overhauling of on-load tap changers. The summary includes:
1) Al Hamad Trading is certified to ISO 9001, ISO 14001, and OHSAS 18001 standards for quality, environmental, and occupational health and safety management.
2) Relevant laws and regulations that will be followed include Qatar labor laws, Qatar Foundation mandatory standards, UK health and safety at work act, electricity at work regulations, and Kahramaa safety rules.
3) Hazards associated with the project such as electrocution, falls, and working
4.6 working at heights and fall protection plan
WORKING AT HEIGHTS AND FALL PREVENTION PLAN
1. Introduction 3
2. Scope 3
3. Revisions 3
4. General Requirement 3
5. Permit to Work 3
6. Hierarchy of Control 4
7. Working at Height Requirement 4
8. Perimeter and Edge Protection Standards 4
9. Vertical Access 5
10. Access Equipment Requirements 5
11. Scaffolding 6
12. Mobile Scaffold Towers 12
13. Work at Height General Precautions 13
14. Personal Fall Prevention System 14
15. Personal Fall Arrest System 15
16. Work at Height Personal Protective Equipment 17
17. EMERGENCY PROCEDURES 18
18. EMERGENCY CONTACT NUMBERS 23
Attachment: 23
HSE Management Plan
VIETNAM MACHINERY INSTALLATION CORPORATION
(LILAMA CORPORATION) SITE SAFETY, HEALTH AND
ENVIRONMENT PLAN (For Bidding purpose)
Site specific safety plan dib
This document outlines the site safety plan for a construction project in Dubai. It details responsibilities of key personnel to ensure safety compliance and protocols. Hazards are assessed and controls are outlined for fall protection, working at heights, power tools, manual handling and more. Inspection forms and an organizational chart are included in the appendices. The plan aims to comply with UAE legislation and codes of practice to achieve the safety objective of zero incidents.
Fmc close out repot hse dept. rev.000
The close out report summarizes HSE performance for a sub sea manifold project from June to October 2013 at PT Gunanusa Utama Fabricators yard. Key highlights include:
- The project achieved its safety objectives of no fatalities, major accidents, fires or explosions. TRIR was 0.00 and LTIF was 0, meeting objectives.
- Medical treatment cases were 6 with no lost time injuries. Near miss incidents were 2.
- HSE programs like inductions, inspections, audits and management oversight were implemented to improve safety behavior.
- Occupational health objectives around emergency equipment, illness reduction and hygiene were also met.
Shassic Checklist
The document is a checklist used to assess safety and health at a construction site in Malaysia called the Safety and Health Assessment System in Construction (SHASSIC). It contains three parts: document checks of safety policies and plans, a workplace inspection checklist, and employee interviews. The document check and workplace inspection assess compliance with items like machinery safety, scaffolding, signage, and more. Interviews are conducted with management, safety personnel, and workers to evaluate awareness of policies, training, emergency preparedness, and accident reporting. The completed checklists show scores for each area and an overall SHASSIC score to evaluate the site's safety and health system.
Health, Safety and Environmental Management Plan
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
HSE Monitoring schedule plan
This document outlines a monitoring schedule plan for a construction project. It details performance metrics that will be monitored monthly, such as man-hours worked, training hours, inspections, incidents, and near misses. Site tours, inspections, and audits will be conducted on a weekly or monthly basis by various roles to assess safety standards. Findings will be recorded online and responsibilities are defined for project leadership to promote and monitor implementation of the plan.
Hse 6 revision_2
This document provides the health, safety, and environmental manual for C&C Technologies, Inc. It outlines the company's policies and procedures around leadership and commitment to HSE, legislation and compliance, organizational structure and responsibilities, risk evaluation and management, planning and implementation of HSE programs, monitoring and implementation, auditing, and appendices including emergency response plans and forms. The manual is intended to establish minimum guidelines to protect employee health and safety and prevent accidents and injuries.
RESUME OF ALI AL-NASSER, PMT HSE SUPERVISOR.compressed
Ali Al-Nasser has over 15 years of experience in safety roles for various construction and maintenance projects in Saudi Arabia. He currently works as an HSE Supervisor for Amec Foster Wheeler on the Sadara Chem III Propylene Oxide Project. Previously, he held safety advisor and supervisor roles for other companies on projects like Sadara and Southern Area Oil Projects Division. He has extensive training and experience ensuring safety compliance according to standards like the Saudi Aramco Construction Safety Manual.
Srinivasa Rao - HSE
Srinivasa Rao has over 20 years of experience in HSE roles in oil, gas and manufacturing projects. He has a diploma in Fire and Safety Engineering and is NEBOSH, OSHAS and IOSH certified. He has worked on projects in the UAE, Malaysia, Saudi Arabia and India, ensuring safety compliance and training workers. His responsibilities include conducting inspections, investigating incidents, developing safety programs, and advising on fire protection.
CV of Prabu-HSE Engineer.DOCX
This document provides a curriculum vitae for Prabu Thangavel, who has 11 years of experience in health, safety, and environment roles in Qatar and India. It details his educational background, which includes degrees in various safety-related fields as well as computer applications. It also lists his safety certifications and training. The work experience section describes his current role as an HSE Engineer/Officer at Deutsche Babcock Al Jaber W.L.L, where he is responsible for implementing safety policies and procedures, conducting audits and inspections, emergency response planning, and permit management. Previously he held safety officer roles in India focused on construction, maintenance and industrial plant projects.
presentation thesis kanios hse 0.5
The HSE plan summarizes the key health and safety requirements for erecting new crude oil storage tanks at an oil refinery in Kavala, Greece. It defines 3 main objectives: 1) outline the theoretical background of HSE, including definitions of safety, health, and environment, and causes of accidents; 2) present the HSE policy and responsibilities of contractors, supervisors, and engineers; 3) provide guidelines on specific safety measures for work involving elevations, electricity, lifting devices, welding, confined spaces, and excavations. The plan aims to ensure work is completed according to Greek legislation and that risks are properly managed to avoid accidents and protect workers.
H P SINHA FORM EHS Practitioner Resume
This resume is for Harendra Prasad Sinha, who has over 40 years of experience in EHS. He has a Bachelor's Degree in science and a PhD in EHS. He has worked in several safety roles in India, including as a Quality Control Inspector and Safety Officer. He has extensive training and experience in areas like safety management, environmental management, and regulatory compliance. He has managed EHS on numerous construction and manufacturing projects throughout Asia.
Hse Implementation By John Burnip
The document outlines site HSE management plans and procedures for a safe construction project with the goal of zero accidents, harm to people, and environmental damage. It discusses defining workplace safety through regulatory compliance, ethics, and safety culture. It also covers hazard identification, risk mitigation, safe working procedures, HSE responsibilities, and ensuring compliance with international standards like ISO. The overall aim is to develop a comprehensive safety system and culture through cooperation between the client, main contractor, and all subcontractors on site.
Safety health and environment
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
Mahmoud El Bahnsy HSE Manager1
This document provides a resume for Mahmoud Fathy EL Bahnsy, including his contact information, objective, work experience, education, training, and publications. He has over 20 years of experience in health, safety, and environment roles for oil and gas companies, including currently serving as BAPETCO Fields HSE Manager. He holds several safety certifications and has extensive training in areas like safety management systems, auditing, and emergency response.
Internship report (Ikram Ali)
1) The document outlines the internship report submitted by Ikram Ali Zardari to DESCON Engineering Services & Technology regarding their internship in the Health, Safety, and Environment department.
2) During the internship, Ikram was introduced to key HSE concepts like risk management techniques, HAZOP studies, loss prevention engineering, and fire water systems.
3) The internship provided both theoretical and practical experience in these areas through daily sessions, assignments, and group discussions with the HSE team. Ikram's report indicates the value gained from the training at DESCON.
Naushad_CV 2016
The document is a resume for Mohammad Naushad Azhar, an HSE professional with over 18 years of experience in various industries including oil and gas. It lists his objective of seeking a challenging career as an HSE professional and highlights his strengths such as safety management skills. It then details his professional experience including roles as an HSE manager, HSE engineer for Saudi Aramco, and HSE coordinator for KHARAFI NATIONAL in Abu Dhabi, where he implemented safety programs, conducted inspections, trained employees, and ensured compliance with regulations. It also lists some career highlights and credentials.
AHU.pdf
This document provides a method statement for installing an air handling unit (AHU). It outlines the responsibilities of the project manager, quality engineer, site engineer, surveyor, and safety officer to ensure installation is completed safely according to approved plans and specifications. Equipment like mechanical hand tools, a mobile crane, and forklift will be used. The AHU will be stored properly and transported to the installation site using a crane or forklift. It will then be set in place, connected to ductwork and electrical lines. Personal protective equipment and safety measures will be implemented during installation to protect worker health and safety.
More Related Content
What's hot
HSE MANDATORY SIGNAGE
This document outlines a project safety signage plan. It includes a document approval sheet for a project with ID number HSE/001. The sheet lists the document type as a project safety signage plan and has spaces for signatures of those who prepared, reviewed, and approved the document, including the HSE manager, QHSE manager, project manager, and project director.
CV
Ahmed A. Saleh Mohamed's curriculum vitae provides information about his personal details, qualifications, professional memberships, coursework, work experience, job duties and responsibilities, languages, and computer skills. He holds a B.Sc. in Industrial Engineering and has over 20 years of experience in safety engineering and management roles in the oil and gas industry in Libya. His roles have included safety specialist, senior safety and environment engineer, safety and environment supervisor, and safety and environment coordinator for various companies.
GTC546 HSE PPT
This document provides a health, safety, and environmental (HSE) presentation by Al Hamad Trading for a project involving the detailed inspection and overhauling of on-load tap changers. The summary includes:
1) Al Hamad Trading is certified to ISO 9001, ISO 14001, and OHSAS 18001 standards for quality, environmental, and occupational health and safety management.
2) Relevant laws and regulations that will be followed include Qatar labor laws, Qatar Foundation mandatory standards, UK health and safety at work act, electricity at work regulations, and Kahramaa safety rules.
3) Hazards associated with the project such as electrocution, falls, and working
4.6 working at heights and fall protection plan
WORKING AT HEIGHTS AND FALL PREVENTION PLAN
1. Introduction 3
2. Scope 3
3. Revisions 3
4. General Requirement 3
5. Permit to Work 3
6. Hierarchy of Control 4
7. Working at Height Requirement 4
8. Perimeter and Edge Protection Standards 4
9. Vertical Access 5
10. Access Equipment Requirements 5
11. Scaffolding 6
12. Mobile Scaffold Towers 12
13. Work at Height General Precautions 13
14. Personal Fall Prevention System 14
15. Personal Fall Arrest System 15
16. Work at Height Personal Protective Equipment 17
17. EMERGENCY PROCEDURES 18
18. EMERGENCY CONTACT NUMBERS 23
Attachment: 23
HSE Management Plan
VIETNAM MACHINERY INSTALLATION CORPORATION
(LILAMA CORPORATION) SITE SAFETY, HEALTH AND
ENVIRONMENT PLAN (For Bidding purpose)
Site specific safety plan dib
This document outlines the site safety plan for a construction project in Dubai. It details responsibilities of key personnel to ensure safety compliance and protocols. Hazards are assessed and controls are outlined for fall protection, working at heights, power tools, manual handling and more. Inspection forms and an organizational chart are included in the appendices. The plan aims to comply with UAE legislation and codes of practice to achieve the safety objective of zero incidents.
Fmc close out repot hse dept. rev.000
The close out report summarizes HSE performance for a sub sea manifold project from June to October 2013 at PT Gunanusa Utama Fabricators yard. Key highlights include:
- The project achieved its safety objectives of no fatalities, major accidents, fires or explosions. TRIR was 0.00 and LTIF was 0, meeting objectives.
- Medical treatment cases were 6 with no lost time injuries. Near miss incidents were 2.
- HSE programs like inductions, inspections, audits and management oversight were implemented to improve safety behavior.
- Occupational health objectives around emergency equipment, illness reduction and hygiene were also met.
Shassic Checklist
The document is a checklist used to assess safety and health at a construction site in Malaysia called the Safety and Health Assessment System in Construction (SHASSIC). It contains three parts: document checks of safety policies and plans, a workplace inspection checklist, and employee interviews. The document check and workplace inspection assess compliance with items like machinery safety, scaffolding, signage, and more. Interviews are conducted with management, safety personnel, and workers to evaluate awareness of policies, training, emergency preparedness, and accident reporting. The completed checklists show scores for each area and an overall SHASSIC score to evaluate the site's safety and health system.
Health, Safety and Environmental Management Plan
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
HSE Monitoring schedule plan
This document outlines a monitoring schedule plan for a construction project. It details performance metrics that will be monitored monthly, such as man-hours worked, training hours, inspections, incidents, and near misses. Site tours, inspections, and audits will be conducted on a weekly or monthly basis by various roles to assess safety standards. Findings will be recorded online and responsibilities are defined for project leadership to promote and monitor implementation of the plan.
Hse 6 revision_2
This document provides the health, safety, and environmental manual for C&C Technologies, Inc. It outlines the company's policies and procedures around leadership and commitment to HSE, legislation and compliance, organizational structure and responsibilities, risk evaluation and management, planning and implementation of HSE programs, monitoring and implementation, auditing, and appendices including emergency response plans and forms. The manual is intended to establish minimum guidelines to protect employee health and safety and prevent accidents and injuries.
RESUME OF ALI AL-NASSER, PMT HSE SUPERVISOR.compressed
Ali Al-Nasser has over 15 years of experience in safety roles for various construction and maintenance projects in Saudi Arabia. He currently works as an HSE Supervisor for Amec Foster Wheeler on the Sadara Chem III Propylene Oxide Project. Previously, he held safety advisor and supervisor roles for other companies on projects like Sadara and Southern Area Oil Projects Division. He has extensive training and experience ensuring safety compliance according to standards like the Saudi Aramco Construction Safety Manual.
Srinivasa Rao - HSE
Srinivasa Rao has over 20 years of experience in HSE roles in oil, gas and manufacturing projects. He has a diploma in Fire and Safety Engineering and is NEBOSH, OSHAS and IOSH certified. He has worked on projects in the UAE, Malaysia, Saudi Arabia and India, ensuring safety compliance and training workers. His responsibilities include conducting inspections, investigating incidents, developing safety programs, and advising on fire protection.
CV of Prabu-HSE Engineer.DOCX
This document provides a curriculum vitae for Prabu Thangavel, who has 11 years of experience in health, safety, and environment roles in Qatar and India. It details his educational background, which includes degrees in various safety-related fields as well as computer applications. It also lists his safety certifications and training. The work experience section describes his current role as an HSE Engineer/Officer at Deutsche Babcock Al Jaber W.L.L, where he is responsible for implementing safety policies and procedures, conducting audits and inspections, emergency response planning, and permit management. Previously he held safety officer roles in India focused on construction, maintenance and industrial plant projects.
presentation thesis kanios hse 0.5
The HSE plan summarizes the key health and safety requirements for erecting new crude oil storage tanks at an oil refinery in Kavala, Greece. It defines 3 main objectives: 1) outline the theoretical background of HSE, including definitions of safety, health, and environment, and causes of accidents; 2) present the HSE policy and responsibilities of contractors, supervisors, and engineers; 3) provide guidelines on specific safety measures for work involving elevations, electricity, lifting devices, welding, confined spaces, and excavations. The plan aims to ensure work is completed according to Greek legislation and that risks are properly managed to avoid accidents and protect workers.
H P SINHA FORM EHS Practitioner Resume
This resume is for Harendra Prasad Sinha, who has over 40 years of experience in EHS. He has a Bachelor's Degree in science and a PhD in EHS. He has worked in several safety roles in India, including as a Quality Control Inspector and Safety Officer. He has extensive training and experience in areas like safety management, environmental management, and regulatory compliance. He has managed EHS on numerous construction and manufacturing projects throughout Asia.
Hse Implementation By John Burnip
The document outlines site HSE management plans and procedures for a safe construction project with the goal of zero accidents, harm to people, and environmental damage. It discusses defining workplace safety through regulatory compliance, ethics, and safety culture. It also covers hazard identification, risk mitigation, safe working procedures, HSE responsibilities, and ensuring compliance with international standards like ISO. The overall aim is to develop a comprehensive safety system and culture through cooperation between the client, main contractor, and all subcontractors on site.
Safety health and environment
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
What's hot (18)
RESUME OF ALI AL-NASSER, PMT HSE SUPERVISOR.compressed
RESUME OF ALI AL-NASSER, PMT HSE SUPERVISOR.compressed
Similar to Hse alert 12 2017 four hse priciples
Mahmoud El Bahnsy HSE Manager1
This document provides a resume for Mahmoud Fathy EL Bahnsy, including his contact information, objective, work experience, education, training, and publications. He has over 20 years of experience in health, safety, and environment roles for oil and gas companies, including currently serving as BAPETCO Fields HSE Manager. He holds several safety certifications and has extensive training in areas like safety management systems, auditing, and emergency response.
Internship report (Ikram Ali)
1) The document outlines the internship report submitted by Ikram Ali Zardari to DESCON Engineering Services & Technology regarding their internship in the Health, Safety, and Environment department.
2) During the internship, Ikram was introduced to key HSE concepts like risk management techniques, HAZOP studies, loss prevention engineering, and fire water systems.
3) The internship provided both theoretical and practical experience in these areas through daily sessions, assignments, and group discussions with the HSE team. Ikram's report indicates the value gained from the training at DESCON.
Naushad_CV 2016
The document is a resume for Mohammad Naushad Azhar, an HSE professional with over 18 years of experience in various industries including oil and gas. It lists his objective of seeking a challenging career as an HSE professional and highlights his strengths such as safety management skills. It then details his professional experience including roles as an HSE manager, HSE engineer for Saudi Aramco, and HSE coordinator for KHARAFI NATIONAL in Abu Dhabi, where he implemented safety programs, conducted inspections, trained employees, and ensured compliance with regulations. It also lists some career highlights and credentials.
AHU.pdf
This document provides a method statement for installing an air handling unit (AHU). It outlines the responsibilities of the project manager, quality engineer, site engineer, surveyor, and safety officer to ensure installation is completed safely according to approved plans and specifications. Equipment like mechanical hand tools, a mobile crane, and forklift will be used. The AHU will be stored properly and transported to the installation site using a crane or forklift. It will then be set in place, connected to ductwork and electrical lines. Personal protective equipment and safety measures will be implemented during installation to protect worker health and safety.
Health and safety management system csctp
This document describes the occupational health and safety management system for the Colombo South Container Terminal Project. It outlines the system's basis in international standards, compliance with local regulations, and focus on best practices. Key aspects of the system include senior management commitment, employee training, performance monitoring, and adequate resourcing to ensure occupational health and safety. The system also includes an occupational health and safety policy and plan with objectives and performance indicators.
CV Vikram HSE Updatedt Nov 2015
Vikram Singh Chouhan has over 21 years of experience in health, safety, and environment management. He has worked on projects in India and the United Arab Emirates for clients such as ADNOC, Takreer, Q-Chem, Tecnimont S.p.A., MASDAR, and Delhi Metro. Chouhan is a NEBOSH IGC and OHSAS 18001:2007 Lead Auditor with expertise in developing and implementing HSE policies, procedures, and training programs. He has experience managing HSE operations, ensuring compliance, investigating incidents, and facilitating audits. Chouhan holds qualifications in industrial safety, firefighting, and first aid.
DO_13_Salient_Features - OHSC Orientation.pdf
Department Order No. 13 provides guidelines for occupational safety and health in the construction industry. It aims to protect workers and the public near construction sites. It defines key terms and covers safety programs, personnel, signage, equipment, and training requirements. Employers must provide personal protective equipment and safety training. The guidelines also establish construction safety and health committees to direct accident prevention efforts.
SafetyPolicy2016.pdf
1. The NTPC safety policy outlines its commitment to providing a safe working environment and striving for zero incidents. Safety is a core value and all accidents are considered preventable.
2. Key responsibilities include the top management being accountable for safety standards and audits. Project heads are responsible for identifying hazards and internal audits. Department heads must ensure safety training and equipment, identify unsafe areas, and ensure rules and procedures are followed.
3. The policy framework coordinates safety across the organization. Corporate Safety develops and reviews safety frameworks and shares best practices. Training is provided. Safety officers report to Corporate Safety.
Prem_CV
Prem Singh has over 11 years of experience in health, safety, environment and quality management. He currently works as the Training Manager at Fortis Occupational Safety Training LLC in Abu Dhabi, where he conducts safety training programs and manages training standards. Previously he held roles as HSE Manager at Al Faraa General Contracting Co. and Senior HSE Officer at ETA Ascon and Brookfield Multiplex, where he implemented safety management systems and ensured regulatory compliance. He holds several safety certifications and has extensive experience in industries including construction, oil and gas, and manufacturing.
Fire preventionplan
The document entails the concept of fire itself, fire fighting, fire prevention; proactive and preventive measures.
my cv
This resume is for Glen L. Malvar, who has over 11 years of experience as a Safety Supervisor/Manager in construction and oil/gas projects. He provides health, safety and environmental oversight and ensures injury-free work environments. He has a bachelor's degree and has worked on numerous projects in the Philippines and Saudi Arabia, supervising safety. He is proficient in safety programs and regulations and ensuring compliance.
CV-HSE sayed abdallah
Sayed Abdallah has over 14 years of experience as a Senior HSE Engineer in Egypt. He has extensive experience developing and implementing HSE management systems according to international standards like OHSAS 18001 and ISO 14001. He is certified in several health and safety programs and has provided training through various training centers in the Middle East region. He is seeking a new position as a Senior HSE Engineer or Instructor in the oil, gas, or petrochemical industries in the Middle East or Gulf area.
Security_Awareness.doc
This document outlines a proposed emergency disaster awareness seminar and drill for employees of Enterprise Bank. The project aims to familiarize employees with procedures for earthquakes and fires through a two-day seminar and drill involving presentations from the Bureau of Fire Protection and Davao City 911. The objectives are to minimize effects of disasters on employees and facilities. The proposal estimates costs and outlines a project schedule, team, and preparation, introduction, session, and review components of the seminar. Success will be implementation of an effective drill to test emergency plans and minimize property loss.
CV - Saif Al-Shadfan
The document provides a resume for Saif Al-Shadfan seeking a position as a Safety Professional. It details his education in chemical engineering and project management as well as extensive experience over 10 years in health, safety, and environment roles on large industrial projects in Qatar, including his current role as Deputy HSE Manager on a refinery project. The resume also lists safety training and workshops he has completed relevant to the role.
2014 resume (2)
Aaron Mark Buxo has over 25 years of experience in health, safety, and environment management in the oil and gas industry. He has developed and implemented HSE programs and management systems for numerous oil and gas companies in Trinidad and Tobago to meet international standards. Currently, he works as an independent HSE consultant, developing and managing HSE systems and providing HSE consulting services. He has extensive expertise in areas such as developing and implementing HSE programs, conducting risk assessments and inspections, emergency response planning, and statistical reporting on HSE performance.
HSE Engineer Resume
Mohammedali Husain is applying for an HSE Engineer/Safety Engineer position. He has over 15 years of experience in HSE and safety engineering roles for oil and gas companies in Kuwait, Saudi Arabia, and India. He holds various safety certifications and has a Bachelor's degree in Chemical Engineering. His experience includes conducting safety audits and inspections, developing safety programs, investigating incidents, and ensuring compliance with HSE standards on construction and maintenance projects.
Safety Based Estimation FINAL
The document provides guidance on developing safety plans for construction estimation competitions. It outlines the typical sections of an estimation binder that should contain safety information, such as the project management plan, scheduling, site plan, and site-specific safety plan. It gives examples of what to include in these sections, such as addressing severe weather risks and personal protective equipment requirements. The document also provides a sample site-specific safety plan section that outlines a company's safety policies on inductions, substance abuse, training, protective equipment, fire prevention and more.
Fire safety plan assembly occupancy
This document provides a fire safety plan template for an assembly occupancy building. It includes sections on building information, definitions, auditing the building and property, controlling fire hazards, training responsibilities, emergency procedures, fire drills, and maintenance procedures. The plan is intended to assist the owner in developing fire safety procedures and assigning staff responsibilities to ensure occupant safety in the event of an emergency.
presentaion saham
AREEBA is an air conditioning company that specializes in the design and installation of all air conditioning systems, from single split systems to large data center systems. They offer comprehensive design services utilizing modern technologies. AREEBA recognizes that project management is key to completing projects on time and on budget. They have project managers that oversee all trades and subcontractors to ensure effective coordination and communication. AREEBA is also fully compliant with all health and safety regulations and conducts regular audits and toolbox talks to maintain safety.
update Khalid safety cv1
The document provides a cover letter and resume for Khalid Decampong Deragun applying for a Safety Officer position. It summarizes his qualifications including over 13 years of experience as a Safety Officer and certifications in IOSH, first aid, firefighting, and ISO standards. It then details his work experience on various construction projects in Qatar as a Safety Officer, and responsibilities implementing health and safety policies and inspections.
Similar to Hse alert 12 2017 four hse priciples (20)
More from Dwarika Bhushan Sharma
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP.pdf
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP-STOP FALLS, CLEAN UP, PICK UP, WIPE UP
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK 2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK
1-HAZARDOUS CHEMICALS.pdf
This document provides the name of a company but no other details. It contains only the words "Company Name" with no other context or information provided. In just two words, the document states the name of a company without any other descriptive text.
PRE-START BRIEFING Form # HSEQ - PSB Rev 2 -.docx
Project Information:
Project Name:
Location: Supervisor :
Company name : Date:
Task Description:
Before work starts, the following must be in place
Induction Supervision Test Certificates Communication in same language Method Statement Risk Assessment Permit To Work Area Lighting
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Fall from height Training Access Ladder Access Handrail Edge Protection Secure Ladder Adequate Work Platform Guards for Openings Safety Harness Life Lines
Others( Specify)
Manual Handling Training Check Weight Mechanical Aids Access Route Team Lifting Wrong method Right Method
Power tools Training Color code inspection tag Check Cable Wheel guards Safe plug & sockets Cable Protection Proper Scaffold Cable Overhead Rotatory part guards
Scaffold Scaffold Tag Edge Protection Check Overhead works Access Ladder Adequate Work Platform Weather condition Out riggers Ladder 3 feet above platform Safety Harness
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Risk Assessment
Lifting Plan Tag Lines Lifting points / hooks Banks man Load stability Check Lifting gear Examination /Inspection Sharp edges protected
Lifting operations Weather/ Wind Speed Ground conditions Exclusion zone Communication Loading/ unloading vehicles Spreader Beams Check Ground conditions Check outriggers Others
Fire Fire Extinguisher Fire Hose Fire Exit Assembly point others
Slip/Trip Clean before you go Barricade the waste Waste Management Clean Access Housekeeping Clean liquid spillage Access signs Maintain access/ Egress
PPE
Safety Harness
Safety Helmet Coveralls Hi vis Jacket Safety Shoe Face Shield Ear Protection
Dust mask Respiratory Equipment Life line/ harness anchorage Hand Gloves Goggles/ Glass
Pre start Briefing done by: Signature:
Reviewed By HSE Manager/ In charge: Signature:
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
Code of Practice
C.O.P # 01
Fire Prevention Requirements
(Management of Combustible Materials & Electrical Inspections)
Rev. 01, Mar 23
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
This document is a sub-contractor pre-start HSE checklist that must be filled out daily before starting any activity. It collects project information, task details including description, location, workers and duration. It also checks that various HSE prerequisites are in place such as safety inductions, risk assessments, PPE availability, inspection of tools and equipment, and that unsafe conditions have been rectified. The sub-contractor must acknowledge that all precautions and control measures have been taken and the workers have been deemed competent to perform the task safely.
STORE INSPECTION Form # HSEQ - Form 2 Rev 2.docx
Project Information
Project Name: Store No.
Location: Contact Person:
Company Name: Arabtec Construction LLC. Date:
Sr. Description Yes No N/A Comments
1. Is access to stores are restricted to authorized personnel only?
2. Are there clear spaces around racks and stacks of stored materials and are adequate gangways provided between them?
3. Are stacks and storage kept clear of light fittings and hot surfaces?
4. Are all stocks of flammable liquids kept in purpose-built flammable storage liquid stores?
5. Are storage areas generally cleaned and tidy?
6. Are flammable liquids kept away from all possible sources of ignition?
7. Emergency exit signs are available in right locations
8. Smoke detectors/fire alarm are visible and accessible.
9. Fire extinguishers are available are serviced regularly
10. Are free standing shelves and cupboards secured for stability?
11. Are heavy items stored at a suitable height?
12. Are chemical containers used for storage suitable and clearly labelled?
13. Is there adequate light in the storage area?
14. Are all small loose items secured in appropriate storage?
15. Are warning notices, prohibiting smoking and naked lights prominently displayed?
16. Others if any:
Remarks:
Inspected by: Signature:
Reviewed by Project Manager/HSE Manager Signature:
WITNESS STATEMENT FORM.docx
This document records a statement for a project located at an unspecified location. The statement is provided and written by an individual who acknowledges that the information is true to the best of their recollection. The individual provides their name, signature, position and date at the end of the statement.
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Injury ☐ Minor Injury ☐ Property Damage ☐ Environmental ☐ Other
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
4. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
5. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Corporate Office Remarks:
HSE FORMS (COVER PAGE)2 Form # HSEQ - Rev 2.docx
This document pertains to health, safety, environment, and quality forms from an HSEQ department. The HSEQ department handles forms related to health, safety, environment, and quality assurance. No other details are provided about the specific forms or purpose of the HSEQ department.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Location / Area :
Panel No : Voltage:
Permit Validity:
Time (from): _______Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
No: Checks Yes-No-NA Checks Yes-No-NA
ENERGIZATION (“Power On”) ISOLATION (“Power Off”)
1. Safety tool box briefing done. ☐ ☐ ☐
Method statement/Risk assessment in place. ☐ ☐ ☐
2. Authorized personnel / operators available. ☐ ☐ ☐
Authorized personnel / operators available. ☐ ☐ ☐
3. Method statement/Risk assessment in place. ☐ ☐ ☐
Adjacent live areas protected. ☐ ☐ ☐
4. Safety Barriers in place and safety signage Displayed. ☐ ☐ ☐
PPE available, high voltage rubber gloves, Safety goggles and floor mat. ☐ ☐ ☐
5. Working area is well lighted. ☐ ☐ ☐
Isolation/Lock-out in place. ☐ ☐ ☐
6. Electrical instruments are available for any Purpose. ☐ ☐ ☐
Electrical circuits “proved” by calibrated Instrument and found out to be no power. ☐ ☐ ☐
7. Correct PPE available, high voltage rubber Gloves, safety goggles and floor mat. ☐ ☐ ☐
Unauthorized workers are cleared from the Area. ☐ ☐ ☐
8. Approved WIR for installation, testing and Termination are attached to the permit. ☐ ☐ ☐
Standby operatives in the event of contact With live circuits. ☐ ☐ ☐
9. Emergency light (Flashlight) available. ☐ ☐ ☐
Emergency light (Flashlight) available. ☐ ☐ ☐
10. Is live work absolutely necessary? ☐ ☐ ☐
Emergency response plan available ☐ ☐ ☐
11. Unauthorized workers are cleared from the area.
☐ ☐ ☐
Other ( Specify): ☒ ☐ ☐
12. Power cable route from panel board to plant & equipment has been checked ☐ ☐ ☐
13 Emergency response plan available ☐ ☐ ☐
14 Other ( Specify): ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
Project Information
Project Name:
Date: Location:
Sr. Equipment type / Name Registration No & Exp Date Company Name
Operator Name / Mb. No Operator Third party competency certificate expiry date Operator License expiry date Equipment & Plant 3rd Party Inspection Certificate expiry date SWL / Capacity Signalman /Rigger name & TPC Exp Comment
1
2
3
4
5
6
7
8
9
10.
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge: Signature:
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
This 5-page document is a checklist for inspecting labour accommodation on a weekly basis. It contains over 100 questions across various categories including access/egress, housekeeping, septic tanks, food preparation, living quarters, firefighting, emergency procedures, first aid, record keeping, environment, and civil defence requirements. Inspectors are to verify that accommodation meets standards for safety, sanitation, emergency preparedness and regulatory compliance by completing the checklist and noting any needed corrective actions or due dates.
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT
(To be submitted to the HSEQ Corporate Office within 7 days of incident.)
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Incident ☐ Minor Incident
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
Click here to enter text.
☐ Photos Attached
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
Click here to enter text.
4. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Click here to enter text.
5. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
Click here to enter text.
6. Witnesses:
I declare that I witnessed the incident and the information provided above is true, correct and complete.
No. Name Designation Signature Date
1. Click here to enter text.
Click here to enter text.
Click here to enter text.
2. Click here to enter text.
Click here to enter text.
Click here to enter text.
7. Incident Information:
Initial Incident Report No.: Click here to enter text.
Date Reported: Click here to enter text.
Date of Incident: Click here to enter text.
Time of Incident: Click here to enter text.
Type of Incident: ☐ Near Miss
☐ Major Environmental Incident
☐ Serious Dangerous Occurrence
☐ Equipment / Property Damage
☐ Medical Treatment Case (MTC)
☐ Restricted Work Case (RWC)
☐ Lost Workday Case (LWC)
☐ Serious Occupational Illness/Disease
☐ Class 1 Injuries
☐ Permanent Partial Disability (PPD)
☐ Permanent Total Disability (PTD)
☐ Fatality (F)
Recordkeeping: ☐ Reportable ☐ Recordable
Incident Location on Site: Click here to enter text.
Applicable Reports: ☐ Police
☐ Medical
☐ Other (Specify)
Click here to enter text.
Attached: ☐ Yes ☐ No
☐ Yes ☐ No
☐ Yes ☐ No
8. Injured Person’s Personal Details:
In case of an incident with more than one injured person, complete the information for each person using separate forms.
Name: Click here to enter text.
Occupation: Click here to enter text.
Company: Click here to enter text.
MB / Oracle No.: Click here to enter text.
Nationality: Click here to enter text.
Date of Birth: Click here to enter text.
Passport Number: Click here to enter text.
Length of Service: Click here to enter text.
Gender: ☐ Male ☐ Female
Labour Card No.: Click here to enter text.
9. Incident Causes Details: To be supported with factual evidence
Immediate Cause
(Unsafe Acts) ☐ Failure to secure
☐ Failure to warn
☐ Removing / Defeating Safety Devices
☐
HSE INDUCTION Form # HSEQ - HSEI Rev 2 -.doc
HSE INDUCTION
(Workers)
Name: _________________________________ Trade: ____________________________
M.B. No./Company Name : ________________
Date of Joining: __________________________
SL. N SUBJECT ON INDUCTION PREVIOUS SAFETY EXPOSURE FURTHER SAFETY TRAINING NEED ANALYSIS
1. Introduction Safety Requirements
2. Working Safety is of Primary Importance
3. General Safety Rules
4. Basic Safety Requirements
5. House Keeping
6. Health, Hygiene & Welfare Facilities
7. Fire Extinguisher / Fire Fighting
8. Emergency Procedure
9. Safety Violations & Penalty
10. Safety Award
11. Manual Handling
Induction Given By: Name: ___________________________
Designation: ___________________________
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
1st Warning 0 Ref. No. ______________
2nd Warning 0
3rd Warning 0
4th Warning 0 Date: ________________
Employee’s Name : ______________________________________ M.B No. : __________
Occupation : _____________________________________________________________________
Location / Project Site: _____________________________________________________________________
You have committed the following HSE violation/s:
………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….….
The employee is hereby warned that if the violation is repeated further disciplinary action can be
taken as per the company Code of Conduct.
ORIGINATOR APPROVED BY (MANAGER IN CHARGE / ARABTEC HSEQ & ORG. RISK Manager)
Name: _______________________________ Name: _____________________________
Designation: _______________________________ Designation: _____________________________
Signature:
_______________________________ Signature:
_____________________________
Employee Acknowledgement:
I the undersigned have received this Safety warning letter / disciplinary notice and I admit that I have understood the contents.
0 Received on: ………………………….. (Date) Signature: ………………………………..…..
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Project Information
Project Name: Porta Cabin No:
Location: Contact Person:
Company Name: Date :
Sr. Description Yes No N/A Comments
1. Emergency exit signs are available in right locations
2. Fire alarms and fire extinguishers are visible and accessible.
3. Fire doors (e.g. in stairways) are kept closed unless equipped with automatic closing device
4. Fire extinguishers are serviced regularly
5. Corridors and stairways are kept free of obstruction
6. Fire escape/ evacuation plan available and posted
7. First aid box available
8. Floor surfaces are kept dry and free of slip hazards
9. Electrical cords and plugs are in good condition with proper Grounding
10. Kitchen equipment checked
11. Fire blanket available in the pantry
12. Heat detector available in the pantry
13. Toilets floor clean and dry
14. Are staff trained to use Fire Extinguishers
15. Hand wash/ soap solution available in the toilet
16. Civil Defense or Authority approval
17. Others if any:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
More from Dwarika Bhushan Sharma (20)
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Recently uploaded
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneHindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdLeveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Recently uploaded (20)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Hse alert 12 2017 four hse priciples
- 1. HSE ALERT # 12 REINFORCEMENT OF 4 HSE PRINCIPLES In accordance with the HSE communications sent earlier, this is to remind all Project HSE Managers on the following: 4 HSE Principles Requiring Reinforcement The following HSEPrinciples mustbe followed by Construction/MEP Management Teams at all projects:- Safety Starts at the Gate (Security and HSE team to enforce) No PPE- No Work (Security and Construction team to enforce) I am Responsible for Safety (Everyone) I amAccountable for everyone’s Safety (AllCompany & Sub-Contractor Management) Signage on the above mentioned HSE Principles must be posted at suitable locations at all projects. Dual Purpose Fire Drills Fire Drill schedules for 2018 needs to be prepared and sent to QHSEDepartment. Fire drills at all projects mustnow include checking of PPE upon evacuation of the building/project. Details of workers and staff not wearing mandatory PPE to be recorded and included in a report which needs to be sent be QHSE Department and their immediate supervisors along with firedrillreport. QHSEDepartment are to be invited to witness fire drills.
- 2. HSE ALERT # 12 HSE Awareness Trainings ProjectHSEteams arerequired to deliver HSE awarenesstrainingsto Construction team on responsibilities, accountabilities, and red/yellow cards for non- enforcement of, or non-compliance with safety regulations and the 4 HSE Principles. Don’t Walk By’s ProjectHSETeams mustconductDWBtrend and causeanalysisand all HSEawards shall be issued considering the output of these analysis.