In order to guide you, to know how to install a centrifugal pump, we (pumpkart.com) shares Presentation. By watching this presentation thoroughly, you can understand the process of centrifugal pump installation better. Pumpkart.com is committed to help its customers by providing all kind of support from guidance to delivery pumps at your step. At pumpkart you can choose a pump of your choice from the world famous pumps manufacturers at best prices.

1. How To
Install a
Centrifugal
Water
Pump

2. Installation Process
First of all,
consult the
manual book to
determine the
right process of
installation

3. Make Base Plate Inspection

4. Check the Pump Impeller, it can be turned by hand

5. If it cannot be turned, open the pump casing to look
for obstructions

6. Turn the shaft clockwise by using a deep socket
wrench on the Impeller nut

7. Open all the body parts of centrifugal pumps and
clean them properly

8. Clean out any corrosion build
up on the impeller

9. If necessary, coat the underside of the base plate to
prevent the rust

10. Pump
Installation
Place
Locate the pump near to the water source

11. Adequate Space For Operation, Inspection And
Maintenance

12. Base Plate
Pumps
Foundation
Grouted on a concrete foundation, which has been
poured on a solid footing

13. Ensure Solid Foundation
So that it will be able to
absorb any vibration
Able to provide a rigid
and permanent support
for the pumping Unit
Use good quality
suction hose that will
not be collapsed by
suction

14. Check all fittings and connections in the suction line
for tightness

15. Tools Required For Installation
•Hammer
•Worm gear saw with
diamond blade
•Rebar cutters
•Concrete mixer
•Concrete vibrator
•Lifting device
•Hand tools
•Chipping hammer
•Pressure washer
•Epoxy adhesive
•Rebar tie wire

16. Correct Installation and Maintenance
of a Centrifugal Pump Ensure Trouble
Free Service

17. Visit www.pumpkart.com to buy
Pumps online and take guidance on
their installation and Maintenance