Solar power systems can provide green fuel through solar energy captured from sunlight. The key requirements for a 10 kW solar power plant include 120 square meters of available roof space and adequate sunlight. Such a system could generate 1200-1400 units of electricity annually with a return on investment within 6-7 years, and have a lifespan of 25 years with minimal maintenance needs. Net metering credits system owners for excess solar energy fed back into the main power grid, while gross metering exports all generated electricity to the grid. Government subsidies and tax benefits are available to encourage solar power adoption.
Energy storage IceBank tanks capture and store efficient half price nighttime electricity, of which a growing portion is comprised of renewable wind energy. Here’s how…
Energy storage IceBank tanks capture and store efficient half price nighttime electricity, of which a growing portion is comprised of renewable wind energy. Here’s how…
SAV Systems develop LoadTracker Combined Heat and Power, Heat Interface Units & Heat Metering , Distribution Manifolds or HVAC Commissioning Modules. Read more on http://www.sav-systems.com/about-us
Holistic District Heating Grid Design with SimulationX & Green CitySimulationX
Buildings are central elements of future smart grids. Heating and cooling demand are predictable within reason, building mass as well as heating and hot water systems provide inherent storage capacity. Additionally, the fluctuation between peak and average power of a building is much more friendly to the grid than of other network nodes like wind power or electric mobility.
A local heating grid partially supplied by renewable solar heat is currently being built in a town in Bavaria. Heat pump systems provide additional storage capacity for electric grid surplus while they serve as wind energy dump for the local utility company. Cogeneration plants and peak-power boilers provide heat and power in times of low energy coverage. The low temperature heating grid supplies decentral heat pumps, which provide required heat at a much higher temperature level to each building.
The paper describes basic modeling aspects for district heating grids with SimulationX & Green City. An interesting solar-aided grid example helps to identify benefits of a new modeling approach.
Demand-Response in the Smart Grid Gotland projectDaniel A. Brodén
A presentation I gave in Eindhoven, Netherlands about demand-response in the Smart Grid Gotland project. The presentation shows results from the wind power integration, market test and market installation subprojects. The subprojects are part of the Smart Grid Gotland project.
Our cities are growing, placing stress on our energy network. More buildings mean more PEAK power demand requiring new power stations. But PEAK power is rarely required. What if we could store it economically?
How to Deploy Energy Storage Technology at the Enterprise Level – Case StudyEMEX
The financial justification for the roll out of battery based storage technology to large and medium sized companies is becoming increasingly compelling. Such systems will allow time shifting of demand enabling an enterprise to take advantage of low priced electricity as well as avoiding expensive electricity and surcharges during periods of high network usage. These benefits can be enjoyed by the enterprise without the need to resort to demand reduction which could impact on the operation of the business. This session focusses on the choices and options concerning the deployment of battery based storage systems and how this new technology can be cost effectively rolled out, at enterprise level, illustrated with some case studies of deployed systems.
Practical Experiences with Smart-Homes Modeling and SimulationSimulationX
Within the next years, more homes will be equipped with smart metering devices, intelligent devices and home energy management systems (HEMS). The EMS are designed to adapt Demand Side Management (DSM) to households. The goals behind the DSM can vary within the household. It can target shaving the load peaks, minimize CO2 emissions, or minimize the overall energy bill via controlling the in-house energy supply resources and intelligent consuming devices. Thus, the EMS represents the dominant ‘smart home’.
Through this contribution, different practices of smart home modeling will be presented in which SimulationX has been integrated under different configurations, software and hardware integrations. The developed models represent the state-of-the art of the current, upcoming and futuristic smart homes. The incentives behind developing these models will be deliberated, along with the economic advantages in its applications within the smart grid. Moreover, the experience behind using SimulationX for evaluating such models will be presented.
This summer a pioneering energy system was put into service at Owen Square, Bristol. Solar panels on the top of Easton Community Centre are used extract heat from the air using an air source heat pump, pass it through the ground and store it as heat in the soil. The heat is stored in pipes in Owen Square and radiated through the soil before other pipes pump the heat back into the community centre through water.
A presentation I gave in 2014 in Gotland, Sweden to the Smart Grid Gotland reference group. The presentation shows some preliminary results from the wind power integration subproject. The subproject is part of the Smart Grid Gotland project
A presentation I gave in 2014 at Smartgridkonferensen in Oslo, Norway. The presentation shows some preliminary results from the wind power integration, market test and market installation subprojects. The subprojects are part of the Smart Grid Gotland project.
SETH is a thermo-electric storage systems which uses high temperature/high density/high temperature phase change materials to produce electricity through conventional steam turbines and will be fit for supercritical fluids.
Solar Energy Analytics Using Internet of ThingsAMOGHA A K
*Extracting usable electricity from sun.
*Conversion of light energy into DC.
*Used in remote areas as placement of electric lines are not viable.
*Solar based system connected to IoT.
*Easy access of data.
ELECTRICAL POWER GENERATION BY HYBRID RENEWABLE ENERGY SOURCE (SOLAR, WIND &...AMOGHA A K
Non-renewable energy resources are highly exploited which has led to environmental degradation.
In order to save our ‘Earth planet’, the solar, wind & hydro renewable energy resources are freely & abundantly available which are eco-friendly and cost- effective . Hence, it can be extensively utilized.
Occupant Behavior of a Plus-Energy Building Regarding Monitoring and Standard...SimulationX
Within a monitoring study by the Federal Ministry for Environment, Nature Conservation, Building and Nuclear Safety, 35 residential buildings with future building standards are being analyzed. Two of these buildings (Plus Energy Buildings) are managed and analyzed by the Leipzig University of Applied Science. An energy-plus house produces more energy from renewable energy sources over the course of a year than it imports from external sources. Until now there have been serious differences between planning simulation and measurement. The main reason has been identified as non-matching simulation models. Complex technical building services, associated with the use of new building materials, exceed the possibility of usage for standardized programs. By using monitoring data, this paper describes the influence of tenants in low energy houses by using the Green-City library in SimulationX. The increasing influence of occupants on energy consumption will be illustrated.
Presented by Marian Ramos at PAARL’s National Summer Conference on the theme "Superior Practices and World Widening Services of Philippine Libraries", held at Dao District, Tagbilaran City, Bohol, 14-16 April 2010
SAV Systems develop LoadTracker Combined Heat and Power, Heat Interface Units & Heat Metering , Distribution Manifolds or HVAC Commissioning Modules. Read more on http://www.sav-systems.com/about-us
Holistic District Heating Grid Design with SimulationX & Green CitySimulationX
Buildings are central elements of future smart grids. Heating and cooling demand are predictable within reason, building mass as well as heating and hot water systems provide inherent storage capacity. Additionally, the fluctuation between peak and average power of a building is much more friendly to the grid than of other network nodes like wind power or electric mobility.
A local heating grid partially supplied by renewable solar heat is currently being built in a town in Bavaria. Heat pump systems provide additional storage capacity for electric grid surplus while they serve as wind energy dump for the local utility company. Cogeneration plants and peak-power boilers provide heat and power in times of low energy coverage. The low temperature heating grid supplies decentral heat pumps, which provide required heat at a much higher temperature level to each building.
The paper describes basic modeling aspects for district heating grids with SimulationX & Green City. An interesting solar-aided grid example helps to identify benefits of a new modeling approach.
Demand-Response in the Smart Grid Gotland projectDaniel A. Brodén
A presentation I gave in Eindhoven, Netherlands about demand-response in the Smart Grid Gotland project. The presentation shows results from the wind power integration, market test and market installation subprojects. The subprojects are part of the Smart Grid Gotland project.
Our cities are growing, placing stress on our energy network. More buildings mean more PEAK power demand requiring new power stations. But PEAK power is rarely required. What if we could store it economically?
How to Deploy Energy Storage Technology at the Enterprise Level – Case StudyEMEX
The financial justification for the roll out of battery based storage technology to large and medium sized companies is becoming increasingly compelling. Such systems will allow time shifting of demand enabling an enterprise to take advantage of low priced electricity as well as avoiding expensive electricity and surcharges during periods of high network usage. These benefits can be enjoyed by the enterprise without the need to resort to demand reduction which could impact on the operation of the business. This session focusses on the choices and options concerning the deployment of battery based storage systems and how this new technology can be cost effectively rolled out, at enterprise level, illustrated with some case studies of deployed systems.
Practical Experiences with Smart-Homes Modeling and SimulationSimulationX
Within the next years, more homes will be equipped with smart metering devices, intelligent devices and home energy management systems (HEMS). The EMS are designed to adapt Demand Side Management (DSM) to households. The goals behind the DSM can vary within the household. It can target shaving the load peaks, minimize CO2 emissions, or minimize the overall energy bill via controlling the in-house energy supply resources and intelligent consuming devices. Thus, the EMS represents the dominant ‘smart home’.
Through this contribution, different practices of smart home modeling will be presented in which SimulationX has been integrated under different configurations, software and hardware integrations. The developed models represent the state-of-the art of the current, upcoming and futuristic smart homes. The incentives behind developing these models will be deliberated, along with the economic advantages in its applications within the smart grid. Moreover, the experience behind using SimulationX for evaluating such models will be presented.
This summer a pioneering energy system was put into service at Owen Square, Bristol. Solar panels on the top of Easton Community Centre are used extract heat from the air using an air source heat pump, pass it through the ground and store it as heat in the soil. The heat is stored in pipes in Owen Square and radiated through the soil before other pipes pump the heat back into the community centre through water.
A presentation I gave in 2014 in Gotland, Sweden to the Smart Grid Gotland reference group. The presentation shows some preliminary results from the wind power integration subproject. The subproject is part of the Smart Grid Gotland project
A presentation I gave in 2014 at Smartgridkonferensen in Oslo, Norway. The presentation shows some preliminary results from the wind power integration, market test and market installation subprojects. The subprojects are part of the Smart Grid Gotland project.
SETH is a thermo-electric storage systems which uses high temperature/high density/high temperature phase change materials to produce electricity through conventional steam turbines and will be fit for supercritical fluids.
Solar Energy Analytics Using Internet of ThingsAMOGHA A K
*Extracting usable electricity from sun.
*Conversion of light energy into DC.
*Used in remote areas as placement of electric lines are not viable.
*Solar based system connected to IoT.
*Easy access of data.
ELECTRICAL POWER GENERATION BY HYBRID RENEWABLE ENERGY SOURCE (SOLAR, WIND &...AMOGHA A K
Non-renewable energy resources are highly exploited which has led to environmental degradation.
In order to save our ‘Earth planet’, the solar, wind & hydro renewable energy resources are freely & abundantly available which are eco-friendly and cost- effective . Hence, it can be extensively utilized.
Occupant Behavior of a Plus-Energy Building Regarding Monitoring and Standard...SimulationX
Within a monitoring study by the Federal Ministry for Environment, Nature Conservation, Building and Nuclear Safety, 35 residential buildings with future building standards are being analyzed. Two of these buildings (Plus Energy Buildings) are managed and analyzed by the Leipzig University of Applied Science. An energy-plus house produces more energy from renewable energy sources over the course of a year than it imports from external sources. Until now there have been serious differences between planning simulation and measurement. The main reason has been identified as non-matching simulation models. Complex technical building services, associated with the use of new building materials, exceed the possibility of usage for standardized programs. By using monitoring data, this paper describes the influence of tenants in low energy houses by using the Green-City library in SimulationX. The increasing influence of occupants on energy consumption will be illustrated.
Presented by Marian Ramos at PAARL’s National Summer Conference on the theme "Superior Practices and World Widening Services of Philippine Libraries", held at Dao District, Tagbilaran City, Bohol, 14-16 April 2010
Graptolites is an important index fossil for Paleozoic rocks and common throughout the world. As in Pakistan the sequences from the Ordovician to carboniferous age missing but these strata are exist in Noshehra and Chitral, so thats why its more valuable as regional fossil of sub-continent.
Physical Geography Lecture 05 - Atmospheric Energy and Global Temps 101216angelaorr
Net radiation. Hypothetical radiation balance. Albedo, Conduction, Convection, Counterradiation. The Greenhouse Effect. Redistribution of energy. Sensible heat vs. Latent heat. Temperature lags. Factors influencing differences in global temperature. Review.
PPT on Cutting Edge Technology Demonstration in NursingArchanaSelvan
Cutting Edge Technology is the need of hour to modern nursing for promoting comfort of patient and reducing time and energy of nurses - the health care provider in all setting.
Nanotechnology has to potential to revolutionize the US energy system. From fuel cells, to cell phone batteries, to space equipment, and everywhere in between nanotechnology can be utilized.
But, there is still a lot of research to be done and many hurdles to cross to make this technology commercially practicable.
To promote the grid connected SPV rooftop and small SPV power generating plants among the residential, community, institutional, industrial and commercial establishments.
Solar energy is radiant light and heat from the Sun that is harnessed using a range of ever-evolving technologies such as solar heating, photovoltaics, solar thermal energy, solar architecture, molten salt power plants and artificial photosynthesis. It is an important source of renewable energy and its technologies are broadly characterized as either passive solar or active solar depending on how they capture and distribute solar energy or convert it into solar power.
what is solar energy definition
10 advantages of solar energy
what is solar energy kids
what is solar energy system
what is solar power definition
facts about solar energy
use of solar energy
solar energy information
interesting civil engineering topics
seminar topics pdf
civil engineering topics for presentation
civil seminar topics ppt
best seminar topics for civil engineering
seminar topics for mechanical engineers
civil engineering ppt
latest civil engineering seminar topics
Solar technologies you can use in your Indian homeThe_Alternative
Greenprint Your Home: U Solar CEO Harinarayan presents the various solar technologies available in the market today for homes. More at www.thealternative.in/greenprint-your-home
Wind energy – Leon Gouws – Kestrel Renewable EnergyIIED
Presentation by Leon Gouws of Kestrel Renewable Energy at the CHOICES project community energy workshops in Somerset East, Pearston and Cookhouse communities, Blue Crane Route Municipality in South Africa’s Eastern Cape, held in February and March 2013.
The presentation covers aspects of wind energy technology.
More information about Kestrel Renewable Energy: http://www.kestrelwind.co.za/
Further details of the CHOICES project: http://www.iied.org/choices-community-energy-project-south-africa
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
6. Requirements
The techno-economic considerations are as detailed below:
• Availability of free roof top space
• Availability of sun
Space Requirements :
The space required for accommodating the 10 kW Solar Power Plant is
about 120 Sq M
11. Power Generation Calculations
• Considering 300 Sunny Days and 65 Non
Sunny Days 1 Kwp produces 1200-1400 units
in an year with ROI in 6-7 years
• Life of Solar plant is 25 years
• Minimal maintenance and no running cost
12. Net Metering
Net metering is a billing mechanism that credits solar energy system
owners for the electricity they add to the grid. For example, if a residential
customer has a PV system on the home's rooftop, it may generate more
electricity than the home uses during daylight hours
If at any moment of time, if solar energy generation (kWh) is more than
the load requirement at that time, the excess solar energy is fed back to
the main grid and the meter now runs backward. In this case, the system
owner gets credit for the units (kWh) fed back to the main grid. Eg. During
peak sunshine hours
13. Gross Metering
Under gross metering arrangements, all electricity you generate is
exported to the grid. A 'gross' meter measures the total amount of
electricity generated by a renewable energy generator.
14. Subsidies & Benefits
• 15% Subsidy on Residential Projects
• 80% income Tax Depreciation in 1st year on Commercial Projects
15. Lending Facilities
• All Major PSU’s are providing loan facilities for
installing rooftop Solar Plant