Clay and clay products are formed through the weathering and erosion of rocks. Clay is composed mainly of fine particles of hydrous aluminum silicates and other minerals. Bricks are a common clay product used in construction. Good brick earth contains 20-30% alumina, 35-50% silica, and 20-30% silt. Bricks are manufactured through molding, drying, and burning clay at high temperatures. Proper firing leads to high strength bricks with less than 20% water absorption. Common defects in bricks include over or under burning, black cores, and efflorescence.
Cement, Cement manufacturing, Types of cementNaresh Kumar
Cement, in general, adhesive substances of all kinds, but, in a narrower sense, the binding materials used in building and civil engineering construction. Cements of this kind are finely ground powders that, when mixed with water, set to a hard mass. Setting and hardening result from hydration, which is a chemical combination of the cement compounds with water that yields submicroscopic crystals or a gel-like material with a high surface area. Because of their hydrating properties, constructional cements, which will even set and harden under water, are often called hydraulic cements. The most important of these is portland cement.
*contents
Ceramics (classification)
Clay products employed in building industry.
Tiles
Terracotta
Earthenware
Stoneware
Porcelain
Bricks
Manufacturing process of common tiles.
Types of common tiles used in building industries.
Characteristics of good tiles
barch_building material-1_Types of lime, Classification of lime, comparison between fat lime and hydraulic lime, Manufacturing
process slaking, Hardening – Testing and Storage, Lime putty, Precautions in handling and uses of
lime.
Popular as Building material.
Material with adhesive and cohesive properties.
To bind the fine and corse aggregate together.
Common variety of cement is known as the Portland cement.
India is the fifth largest producer of cement in the world.
Rajasthan is the second largest producer of cement in india after Andra Pradesh.
MANUFACTURING AND UNDERSTANDING ABOUT CEMENT ITS COMPOSITION, INTERNAL MECHANICS, VARIOUS METHODS OF MANUFACTURING, USES AND VARIOUS COMPOUNDS PRESENT IN CEMENT AND ITS IMPORTANCE
CHECKOUT MY YOUTUBE CHANNEL
http://www.youtube.com/c/beaCIVILEngineergovindsir_onlineclasses
In this presentation, we are trying to cover all manufacturing process of ceramic tiles. We are leading B2B company providing business directory of best ceramic tiles manufacturers in India and across the world.
Introduction- Classification of cements - Portland Cement
Raw materials of Portland cement - Cement Manufacturing Process - Flow chart of Portland Cement manufacturing process - Cement Manufacturing Video - Mixing and Crushing
Dry Process - Wet Process - Burning Process - View of complete setup - Rotary Klin zones - Chemical Reactions -
Grinding and Packaging - Setting and hardening - Flow chart
Sequence - Chemical Reactions - Special Cement -
In this presentation we have discussed various uses of hydrated lime and suppliers of its. if you are looking hydrated lime suppliers and exporters then you can visit at web portal of tradeindia.
Cement is a building material for binding bricks, stones or aggregates.
Used for making mortar or concrete.
Cements natural and artificial.
Natural cement-burning and crushing of stones and lime.
Artificial cement-burning at high temperature and gypsum is added.
Cement, Cement manufacturing, Types of cementNaresh Kumar
Cement, in general, adhesive substances of all kinds, but, in a narrower sense, the binding materials used in building and civil engineering construction. Cements of this kind are finely ground powders that, when mixed with water, set to a hard mass. Setting and hardening result from hydration, which is a chemical combination of the cement compounds with water that yields submicroscopic crystals or a gel-like material with a high surface area. Because of their hydrating properties, constructional cements, which will even set and harden under water, are often called hydraulic cements. The most important of these is portland cement.
*contents
Ceramics (classification)
Clay products employed in building industry.
Tiles
Terracotta
Earthenware
Stoneware
Porcelain
Bricks
Manufacturing process of common tiles.
Types of common tiles used in building industries.
Characteristics of good tiles
barch_building material-1_Types of lime, Classification of lime, comparison between fat lime and hydraulic lime, Manufacturing
process slaking, Hardening – Testing and Storage, Lime putty, Precautions in handling and uses of
lime.
Popular as Building material.
Material with adhesive and cohesive properties.
To bind the fine and corse aggregate together.
Common variety of cement is known as the Portland cement.
India is the fifth largest producer of cement in the world.
Rajasthan is the second largest producer of cement in india after Andra Pradesh.
MANUFACTURING AND UNDERSTANDING ABOUT CEMENT ITS COMPOSITION, INTERNAL MECHANICS, VARIOUS METHODS OF MANUFACTURING, USES AND VARIOUS COMPOUNDS PRESENT IN CEMENT AND ITS IMPORTANCE
CHECKOUT MY YOUTUBE CHANNEL
http://www.youtube.com/c/beaCIVILEngineergovindsir_onlineclasses
In this presentation, we are trying to cover all manufacturing process of ceramic tiles. We are leading B2B company providing business directory of best ceramic tiles manufacturers in India and across the world.
Introduction- Classification of cements - Portland Cement
Raw materials of Portland cement - Cement Manufacturing Process - Flow chart of Portland Cement manufacturing process - Cement Manufacturing Video - Mixing and Crushing
Dry Process - Wet Process - Burning Process - View of complete setup - Rotary Klin zones - Chemical Reactions -
Grinding and Packaging - Setting and hardening - Flow chart
Sequence - Chemical Reactions - Special Cement -
In this presentation we have discussed various uses of hydrated lime and suppliers of its. if you are looking hydrated lime suppliers and exporters then you can visit at web portal of tradeindia.
Cement is a building material for binding bricks, stones or aggregates.
Used for making mortar or concrete.
Cements natural and artificial.
Natural cement-burning and crushing of stones and lime.
Artificial cement-burning at high temperature and gypsum is added.
In presentation I have covered all the topics of building materials which are used in construction work of any building like stone,brick,sand,cement,etc.
A brick is a block or a single unit of a ceramic material used in masonry construction. Typically bricks are stacked together or laid as brickwork using various kinds of mortar to hold the bricks together and make a permanent structure.
Bricks are typically produced in common or standard sizes in bulk quantities. They have been regarded as one of the longest lasting and strongest building materials used throughout history.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
1. CLAY AND CLAY
PRODUCTS
GROUP 6
NAME REG NO CONTACT
SEMPALA RONALD 2018/KCE/0009/G/F 0700168163
AKAMPURIRA ASAPH 2018/KCE/0018/G/F 0786853331
ASINGYA DERRICK 2018/KCE/0762/F 0783416085
TANDIKWIRE SAMUEL 2018/KCE/1222/F 0702582218
1
2. DEFINITION OF CLAY, ITS COMPOSITION AND
FORMATION
CLAY is an earthy material that is plastic when moist but hard when fired,
that is composed mainly of fine particles of hydrous aluminum silicates
and other minerals, and that is used for making bricks, tiles, and pottery.
Clay is mainly composed of silica (SiO2) and alumina (Al203) and some
other minerals which exist in small quantities.
Clays were formed by two processes
Erosion: This involves washing and wearing of rocks by agents of erosion
like water wind and others to form different soils of which clay is part.
These rocks may include sedimentary rocks.
Weathering: This process involve physical and chemical disintegration of
rocks containing clay minerals forming clay deposits.
2
3. CLASSIFICATION OF CLAY
Clay is basically classified according to the following
1. Basing on the mode of formation
o Residual clays, known as Kaolin or China clay, are formed from the decay
of underlying rocks and are used for making pottery.
o Transported or sedimentary clays result from the action of weathering
agencies. These are more disperse, contain impurities, and free from
large particles of mother rocks.
2. Basing on dominant characteristics
o China clay: This is the purest kind of clay containing a very high
percentage of kaolin “Al2Si2O5(OH)4” and is used in making porcelain ,
fire resisting cement and white Portland cement.
3
4. CONTINUATION
o Fire refractory clays: These contain silica and alumina in very high
proportions and are capable of withstanding very high temperatures
without deforming in shapes.
o Vitrifying clays: These clays are rich in fluxing compounds like iron oxide
and carbonates of calcium and magnesium. They can not withstanding
very high temperatures. They are also called hard burning clays and are
used for making facing bricks, flooring tiles, sewer pipes and other
ornamental clay products.
o Brick clays : Are also called brick earth and are of low grade having a
variety of compound of silica, alumina, oxides of iron, lime magnesia and
organic matter.
They are majorly transported clays and are used for making building
bricks and ordinary load bearing and partition tiles. 4
5. PROPERTIES OF CLAY
Physical properties
Plasticity: is the property of wetted clay to
be permanently deformed without cracking.
High tensile strength
Texture: The texture of clay is measured by
the fineness of its grains.
Size and shape: The size and shape of clay
is too small or too thin to be seen thus
determined by electron micrographs.
Porosity: This is the ratio of the volume of
pore space to the dry volume. Thus large
pores allow water to evaporate more easily
than small pores.
Solubility: the solubility depends on the
nature , temperature, and concentration of
the acid or base where it is applied
Chemical properties
Ion exchange: This is the ability of clay
minerals to absorb certain cations and anions
and retain them around the outside of the
structural unit in an exchangeable state
without affecting the basic silicate structure.
Reaction with organic and inorganic
compounds: some cationic organic
molecules may replace inorganic
exchangeable cations present in the
interlayer of expansible minerals to form
complexes. And some clay minerals can
accommodate relatively large inorganic
cations between the layers of clay.
Water affinity: water retention ability of clay.
The water may be held in pores or at the
surface of clay mineral structures and may be
removed by drying under ambient conditions.5
6. CLAY PRODUCTS AND EXAMPLES
Clay products are materials made from clay
Examples of clay products may include;
1. Clay bricks /brick earth
2. Clay tiles
3. Refractory bricks
4. Earthen ware
5. Stoneware
6
7. BRICKS
Building bricks may be defined as structural units of rectangular shape
and convenient size that are made from a suitable type of clays by
molding, drying and burning.
They are used for building interior and exterior walls, partitions, piers,
footings, and other load Bering structures.
The standard dimension of a brick are 215*102.5*65mm.
7
8. REQUIREMENTS OF A GOOD BRICK EARTH
Homogeneous: The brick should have a uniform deep red or cherry
colour indicating uniformity in chemical composition and thoroughness
in the burning of the brick.
It should be free from stones, lime or kankars, pebbles, grit,
vegetables, organic matter, and alkaline salts.
It should have proper proportions of sand silt and clay
It should have sufficient plasticity for proper moulding.
Water absorption should not exceed 20 % of its dry weight.
The brick should have uniform size and size.
8
9. TYPES OF BRICKS
They include;
Common bricks: These are manufactured economically without special
reference to appearance. These may vary greatly in strength and durability and
are used for internal walls where appearance is of no consequence and may also
be used as an aggregate in concrete when crushed.
Facing bricks: These are used for decoration and are durable under severe
exposure and are used in fronts of building walls for which a pleasing
appearance is desired. They do not require any further surface finish.
Engineering bricks: "heavy duty bricks” are a type of bricks used where high
strength, high durability, low water porosity or acid (flue gas) resistance are
needed. Engineering bricks can be used for damp-proof courses, bridge
structure, industrial foundations and other heavy engineering works.
9
10. CLASSIFICATION OF BRICKS
They are four main classifications;
1) First Class Bricks: These bricks are of standard shape and size. They are
burnt in kilns. They fulfill all desirable properties of bricks and 12–15% water
absorption of it dry weight.
2) Second Class Bricks: These bricks are ground moulded and burnt in kilns.
The edges may not be sharp and uniform. The surface may be somewhat
rough. Such bricks are commonly used for the construction of walls which
are going to be plastered.
3) Third Class Bricks: These bricks are ground moulded and burnt in clamps.
Their edges are somewhat distorted. They produce dull sound when struck
together. They are used for temporary and unimportant structures.
4) Fourth Class Bricks: These are the over burnt bricks. They are dark in
colour. The shape is irregular. They are used as aggregates for concrete in
foundations, floors and roads. 10
11. COMPOSITION OF GOOD BRICK EARTH,
FUNCTIONS AND EFFECTS.
1. Alumina or clay (20 - 30%) by weight: It is the principal constituent of brick
earth. It imparts plasticity to the brick earth which is essential for proper
moulding of bricks Alumina or Clay in brick earth shrinks and cracks on drying.
It also wraps and becomes very hard on burning unless mixed with sand.
2. Silica or sand (35 - 50%):Sand or silica in brick earth prevents the
shrinkage, cracking and wrapping of bricks it also makes the bricks durable.
Excess of silica makes the bricks brittle and weak.
3. Silt (20 - 30%): The total content of clay and Silt shall not be less than 50%.
4. Remaining ingredients include;
Lime (Cao)
Oxide of iron
Magnesia oxide
11
12. CONTINUATION
Lime: About 10%, It helps to bind the particles of brick earth together. It
also reduces shrinkage of bricks. Excess of lime causes the brick to melt
and the brick looses its shape.
Oxide of Iron: Present in small quantities and acts as a flux. It helps the
grains of sand to melt and binds the particles of clay together. It also
provides the required red colour to the bricks on burning. But excess of
oxide of iron makes the bricks dark blue.
Magnesia oxide: Present in small quantities and makes the brick of
yellowish colour and reduces shrinkage. But excess of magnesia leads to
decay of bricks.
12
13. HARMFUL SUBSTANCES IN BRICK EARTH
LIME: If in excess, it changes the colour of the brick from red to yellow. When lime is
present in lumps, it absorbs moisture, swells and causes disintegration of the bricks.
Therefore, lime should be present in finely divided states and lumps.
PEBBLES AND GRAVELS: Pebbles and Gravels do not allow the clay to be mixed
thoroughly and spoil the appearance of the brick. Bricks with pebbles and gravels may
crack while working.
IRON PYRITES: This tends to oxidize and decompose the brick during burning. The
brick may split into pieces.
ALKALIS: When present in excess, alkali makes the clay unsuitable for bricks. They
melt the clay on burning and make the bricks unsymmetrical. When bricks come in
contact with moisture, water is absorbed and the alkalis crystallize. On drying, the
moisture evaporates, leaving behind grey or white powder deposits on the brick which
spoil the appearance.
ORGANIC MATTER: On burning green bricks, the organic matter gets charred and
leave pores making the bricks porous; the water absorption is increased and the
strength is reduced.
CARBONACEOUS MATERIALS: Its presence causes a black core.
13
14. MANUFACTURING OF BRICKS
It involves the following;
1. Preparation of clay: Choosing site, additives eg fly ash and sand loam
brought near, top soil layer is eliminated, weathering and blending.
2. Molding of clay
Hand molding of bricks: Using a wooden form and table.
Machine molding of bricks: Using a machine to mould the bricks.
3. Drying of raw bricks
natural drying.
artificial drying.
4. Burning of bricks at about 11000C in kilns.
14
15. DRYING OF BRICKS
Natural drying: Also called hack drying and involves arranging wet bricks
in rows on their edges on raised ground called hack and also little space
for circulation of air is left for each brick.
artificial drying: This method is done using special driers called tunnels
which receive heat from special furnaces. It is used when bricks are
required on a large scale and at a rapid rate.
15
16. WAYS OF BURNING BRICKS
A. Open/clamp kiln: The bricks and fuel are placed in alternate layers.
The amount of fuel is reduced successively in the top layers. Each brick
tier consists of 4–5 layers of bricks. Some space is left between bricks
for free circulation of hot gasses. After 30 per cent loading of the clamp,
the fuel in the lowest layer is fired and the remaining loading of bricks
and fuel is carried out hurriedly. The top and sides of the clamp are
plastered with mud. Then a coat of cow dung is given, which prevents
the escape of heat.
16
17. ADVANTAGES AND DISADVANTAGES OF OPEN
KILN
advantages
Burning of bricks is cheap and
economical
The clamp is not affected by wind
or rain.
Skilled labour is not required for
consideration of clamps
It saves fuel.
Bricks produced are tough and
strong.
disadvantages
Slow proress because it
requires a lot of time during
burning
The bricks produced are not of
regular shape.
Bricks are likely to burn un
evenly.
Quality of bricks produced is not
uniform due to non-uniform
burning of the bricks. 17
18. B. INTERMITTENT KILN
This is sometimes known as periodic kiln and consists of a single firing
chamber. Here, the bricks to be fired are placed into the kiln. The kiln is
closed, and the internal temperature increased according to a schedule.
After the firing is completed, both the kiln and the bricks are cooled. The
bricks are removed and the kiln is cleaned and the next cycle begins.
18
19. ADVANTAGES AND DISADVANTAGES OF
INTERMITTENT KILN
Advantages.
Brick supply is intermittent.
Disadvantages.
Burning of bricks is not uniform.
The supply is not continuous.
There is a loss of heat from top
most layers of bricks.
There is waste of fuel heat as the
kiln is to be cooled down.
The cost of manufacture is more.
19
20. C. CONTINUOUS KILN
These are a series of connected kilns or one continuous chamber through
which a fire travels bricks being set ahead of the fire and this kiln runs day
and night. From the cool entrance, bricks are slowly transported through
the kiln, and its temperature is increased steadily as it approaches the
central, hottest part of the kiln. From there, it continues through the kiln,
and the surrounding temperature is reduced until it exits the kiln nearly at
room temperature.
20
21. ADVANTAGES AND DISADVANTAGES OF
CONTINUOUS KILN
Advantages
Continuous production, short
production cycle, high yield, high
quality.
High thermal efficiency so it saves
fuel.
Save labor. The firing operation is
simple, loaded kiln and kiln
operations are carried out in the kiln.
So it is also very convenient,
improves the working conditions of
the operator, and reduces the labor
intensity.
Uniform burning of bricks.
Disadvantages
Construction of the kiln needs more
materials and equipment hence High
initial cost of construction
21
22. TESTS CARRIED OUT ON BRICKS
1. Water Absorption Test: Six bricks weighed are dried in oven at 105 °C and
cooled at the room temperature. They are then immersed in water for 16 hours.
Thereafter dried with a dump cloth and weighed.
Absorption in % = W2-W1 *100%
W1
where, W1 and W2 are the respective weights of dry and the immersed
specimens and it should not exceed 20%
2. Crushing Strength or Compressive Strength: It is done by placing the
specimen between the plates of a compression test machine, the load is applied
axially at a uniform rate of 14N/mm2 and the maximum load at which the
specimen fails is noted
Compressive strength= maximum load at failure
loaded area of brick
22
23. CONTINUATION
3. Hardness Test on Bricks:
4. Shape and Size Test: 20 bricks of standard size are randomly got and
stacked lengthwise along the width and height. The results should not vary
so much from 190*90*90
5. Color Test of Bricks: Usually brown
6. Soundness: It is done by striking two bricks together, they should not
break and should have a clear ringing sound.
7. Structure of Bricks: It should be homogeneous and compact and non
porous.
8. Efflorescence Test: It is done by immersing the brick in water for 24
hours, put out and allowed to dry in the shade and tested with sodium
hydroxide. If soluble salts are present on its surface, it shows grey or white
deposits on its surface.
23
24. DEFECTS IN BRICKS
1. Over burning of bricks :When bricks are over-burn, soft molten mass
is produced and the brick will lose its shape along with other designated
requirements.
24
25. CONTINUATION
2. Under burning of bricks: When bricks are not burnt to cause complete
vitrification, the clay is not softened because of insufficient heat and the
pores are not closed. Consequently, bricks with low compressive strength
and high-water absorption will be produced. They produce a dull sound
when struck against each other. Finally, such bricks are not recommended
for construction works.
25
26. CONTINUATION
3.Black core: Improper burning is the major cause of brick black core.
Bricks, which contains bituminous matter or carbon and they are not
completely removed by oxidation, will commonly experience such problem.
26
27. CONTINUATION
4. Efflorescence
Presence of drying grey or white powder patches on the brick surface is the
efflorescence indicator. This defect is caused because of alkalis present in bricks.
When bricks come in contact with moisture, water is absorbed and the alkalis
crystalize. Efflorescence can be minimized by selecting proper clay materials for
brick manufacturing, providing waterproof coping to prevent moisture and by using
water repellent materials in mortar and by providing damp proof course.
27
28. CONTINUATION
5. Frost attack/damage: It is a common problem that usually occurs in
older bricks, and those that were under burnt during the firing process. In
newer construction, failure through frost attack tends to be confined to areas
of severe exposure, or where the frost resistance of the brick was incorrectly
specified. When water turns to ice, there is a 9% increase in its volume. This
expansion can produce stress within the brick which causes spalling, with
the brick face flaking off and/or crumbling.
28
29. CLAY TILES AND TYPES
Roof tiles are designed mainly to keep out rain, and are traditionally made
from locally available materials such as terracotta or slate. Modern materials
such as concrete and plastic are also used and some clay tiles have a
waterproof glaze.
Clay tiles include;
roofing tiles
Flooring tiles
Wall tiles
Drain tiles
Glazed earthenware tiles.
29
30. EXAMPLES OF ROOFING TILES
1) Flat tiles: This is the simplest type,
which are laid in regular overlapping
rows. Flat roof tiles are usually made of
clay but also may be made of stone,
wood, plastic, concrete, or solar cells.
2) Pot tiles: Also called pan tiles with an
S-shaped profile, allowing adjacent tiles
to interlock. These result in a ridged
pattern resembling a ploughed field. for
example, the "double Roman tile “.
30
31. CONTINUATION
3) Allahabad tiles: These have
different shapes . flat tiles are laid side
by side and the joints between covered
with half round pot tiles.
4) Mangalore tiles: These are the most
common and have a top locking to
improve protection from water and wind.
31
32. CONTINUATION
5) Ridge valley tiles: Are basically for
sloped roofs.
6) Corrugated tiles: These have
corrugations and when placed in
position, a side lap of two corrugations is
produced.
32
33. CHARACTERISTICS OF A GOOD ROOFING TILE.
The following are the qualities of a good roofing tile;
It should be resistant to atmosphere and dampness
It should be durable
It should absorb less than 15% of water
It should be free from defects like flaws , cracks and non-uniform
burning
It should have a uniform texture
It should be accurate in size and shape.
33
34. MANUFACTURE OF ROOFING TILES.
They are prepared in the same way as bricks but are
thinner and lighter, so require greater care.
Preparation of clay
Moulding of tiles.
Drying of tiles
Burning of tiles.
34
35. TESTS ON CLAY TILES.
1) Warpage test: This should not exceed 2% along edges and 1.5% along
the diagonal for the case of flooring tiles.
2) Transverse strength: Consists of applying the load along the Centre
line at right angles to the length of the tile (which has been immersed in
water for 24 hours)supported on the rounded edges of wood bearers. Six
tiles are tested and the average breaking load should not be less than 450-
550 N/min.
3) Water absorption: Six tiles are dried in oven at 105 ± 5°C and cooled at
the room temperature. They are then immersed in water for twenty four
hours. Thereafter dried with a dump cloth and weighed.
Absorption in % = W2-W1 *100%
W1
where, W1 and W2 are the respective weights of dry and the immersed
specimens.
35
36. APPLICATIONS OF CLAY PRODUCTS
Aggregate for concrete. Creamsite (manufactured from low-heat clay), a light
weight porous material forms excellent aggregate for light weight concrete.
Acid-resistant lining items. The examples are common acid-resistant brick, acid-
resistant and heat-and-acid-resistant ceramic shaped tiles for special purposes,
ceramic acid resistant pipes and companion shapes.
Roof materials. The examples are common clay roof tiles for covering slopes of
roofs, ridge tiles for covering ridges and ribs, valley tiles for covering valleys, end tiles
("halves" and "jambs") for closing row of tiles, special tiles.
Clay products for interior decoration. The examples are tiles for facing walls, built-
in parts, large floor tiles and mosaic floor tiles.
Brick for special purposes. The example are curved clay brick, stones for sewage
installations (underground sewer pipes) brick for road surface.
Facade decoration. The examples are glazed or non-glazed varieties subdivided
into facing brick and ceramic stones, floor ceramics, small-size ceramic tiles, ceramic
plates for facades and window-sill drip stones. 36
THE END